Construction of Fire Station at Various Places in Khoraj, Amiyapur, and Vavol for GMC at Gandhinagar (2nd Trial)

Name of Work :- Construction of Fire Station At Various Place in Khoraj, Sughad and Vavol For Gmc At Gandhinagar.

Item Item Description

No. Unit Total Qty Rate in Figure Rate in Words Total Amount

No. Unit Total Qty Rate in Figure Rate in Words Total Amount

Earthwork in cuting in all sorts of soil and soft murrum including

conveying and spreading the stuff, embankment as and where

Ninety Three Rupees

1 directed within 200meters from the end of the cutting with all C.M. 5281.00 93.88

and Eighty Eight Paise

required lead and lift.(C) Above 400 Meters upto 500 Meters.

Excavation for foundation upto 1.5m. Depth including sorting out

One Hundred Twenty

and stacking of useful materials and disposing of the excavated

2 C.M. 6435.50 123.13 Three Rupees and

stuff up to 50 mt. lead : (A) Loose Or Soft Soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

One Hundred Thirty

sorting out and stacking of useful materials and disposing off the

3 C.M. 3881.00 136.30 Six Rupees and Thirty

excavated stuff upto 50 Meter lead.(A)Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

One Hundred Forty

including sorting out and stacking of useful materials and

4 C.M. 144.00 149.65 Nine Rupees and Sixty

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Boring holes 2.1 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as Eight Hundred Thirty

directed within a lead of 50 Meter for following diameter of pipes. Seven Rupees

(iii) 250 mm : Auger

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

Seven Hundred Fifty

6 complete excluding cost of formwork in (A) Foundation and Plinth C.M. 1360.00 3758.19

Eight Rupees and

Providing and laying cement concrete 1: 2:4 (1 cement : 2coarse

sand :4 graded stone aggregates 20 mm nominal size) and curing

complete including cost of formwork but excluding reinforcement Three Thousand Two

7 C.M. 345.00 3269.01 Hundred Sixty Nine

for reinforced concrete work in: (A)Foundation footing, base of

columns & mass concrete. Rupees and One Paisa

Providing and laying controlled cement concrete work M250 and

Four Thousand Four

curing complete including the cost of form work but excluding

Hundred Eighty Five

8 reinforcement of reinforced concrete work in :(A) foundation, C.M. 233.00 4485.41

Rupees and Forty One

footing, base of columns and mass concrete

Providing and laying controlled cement concrete work M250 and

Four Thousand Three

curing complete including the cost of form work but excluding

Hundred Forty Six

9 reinforcement of reinforced concrete work in : Auger C.M. 53.50 4346.88

Rupees and Eighty

Providing and laying controlled cement concrete work M250 and

Seven Thousand Two

curing complete including the cost of form work but excluding

Hundred Twenty Two

10 reinforcement of reinforced concrete work in : (B) Columns, piller C.M. 69.00 7222.12

Rupees and Twelve

posts and struts up to plinth level

Providing and laying controlled cement concrete work M250 and

Five Thousand Nine

curing complete including the cost of form work but excluding

Hundred Eighty Nine

11 reinforcement of reinforced concrete work in : (C) Beams up to C.M. 301.00 5989.30

Rupees and Thirty

Providing and laying controlled cement concrete work M200 and

Four Thousand Seven

curing complete including the cost of form work but excluding

Hundred Eighty Seven

12 reinforcement for reinforced concrete work in : Plinth slab ((C) C.M. 376.00 4787.40

Rupees and Forty

Slabs (Grade Slab) upto floor two level.)

Labour charges for giving Trimix treatment to Concrete surface

Two Hundred Sixty

including necessary steel channel formwork and required tools and

13 S.M. 267.00 260.58 Rupees and Fifty Eight

machinery including preparing joint with concrete cutter machine

as required and directed.

Providing and laying controlled cement concrete work M200 and Five Thousand Four

curing complete including the cost of form work but excluding Hundred Seventy

reinforcement of reinforced concrete work in : (C) Coping upto Rupees and Sixteen

floor two level. Paise

Providing TMT Bar FE-500/500D reinforcement for R.C.C. work Seventy Seven

15 including bending, binding and placing in position comp. upto floor kg 209035.00 77.29 Rupees and Twenty

two level. Nine Paise

Brick work using common burnt clay building bricks having crushing Four Thousand Two

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Hundred Fourteen

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional Rupees and Nine

Filling available excavated earth (excluding rock) in trenches plinth,

One Hundred Thirty

sides of foundations etc. in layers not exceeding 20 cm. in depth

17 C.M. 17475.00 136.92 Six Rupees and Ninety

consolidating each deposited layer by ramming and watering)

Filling in foundation and plinth with murrum or selected soil in

Two Hundred Seventy

layer of 20 cm thickness including watering ramming and

18 C.M. 12184.00 277.14 Seven Rupees and

consolidating including lead of murrum from 3 km etc complete.

Providing and laying 20 mm thick water proof cement plaster using

water proofing powder 1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing materials in C M 1: 4 ( 1 Two Hundred

19 S.M 171.00 217.15 Seventeen Rupees

cement 4 coasrse sand) including finishing with a flooting coat of

neat cement slurry etc complete for all floor. and Fifteen Paise

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is recommended One Hundred Eleven

i.e one litre 20 EC chemical emulsion with 19 liter give 1 % S.M. 2350.00 111.25 Rupees and Twenty

concrentration inclusive of one litre chemical emulsion appication Five Paise

at the rate of 5 Litre chemical / Sqm of surface is recommended as

Constructing Under Ground water tank with Providing and laying

controlled cement concrete M250 mix for R.C.C. work including

rainforcement, boxing, centering,vibrating, curing and mixed with

approved water proofing cement compound or "CEMWET" or

"PIDICRETE LW" integral water proofing admixture as water

proofing agent to be mixed with 50 kgs. bags shall be as

recommended by the manufacture of the water proofing material,

concrete work for top, bottom slab & side pardi for under ground

water tank item incl. Necessary excavation & refilling the available

earth, 15 cm thk 1:2:4 for bedding of concrete, 20 mm thk. water Eight Rupees and

21 proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes lit 350000.00 8.08

tile Dedo, vata, watering etc. Comp. to all face of tank . including

locking arrengement outlet, inlet, overflow and washout outlet

pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not

less then 35 kg with locking arrengment. etc. comp as per

structural drawing Including Steel & as directed by Eng-in-charge.

Providing and laying controlled cement concrete work M250 and

Seven Thousand Two

curing complete including the cost of form work but excluding

22 reinforcement of reinforced concrete work UP TO FLOOR TWO C.M. 45.00 7280.08

Rupees and Eight

LEVEL : A1)COLUMN At Ground Floor Level

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding

23 reinforcement of reinforced concrete work in : (B) Columns : At All C.M. 312.00 7321.49

Twenty One Rupees

and Forty Nine Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Three

curing complete including the cost of form work but excluding

24 reinforcement of reinforced concrete work in : ( C) Beam: at C.M. 202.00 6328.66

Eight Rupees and

Ground floor slab ( up to floor two level) Ground Floor

Sixty Six Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Nine Thousand Five

reinforcement of reinforced concrete work in : ( C) Beam: at All C.M. 227.50 9508.59 Hundred Eight Rupees

Floor and Fifty Nine Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand One

reinforcement of reinforced concrete work in : (D) Slab: At Ground Hundred Ninety Two

floor Rupees and Thirty

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Nine Thousand Nine

reinforcement of reinforced concrete work in : (D) Slab: At All Floor Hundred Ninety

Seven Rupees and

Sixty One Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Four

28 reinforcement of reinforced concrete work in : (E) Lintels: At C.M. 46.00 6402.39 Hundred Two Rupees

Ground Floor and Thirty Nine Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Four

reinforcement of reinforced concrete work in : (E) Lintels: At All Hundred Eighty Four

Floor Rupees and Twenty

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Seven

30 reinforcement of reinforced concrete work in : Chhajja : (F) C.M. 55.00 6007.48 Rupees and Forty

Chhajjas: At Ground Floor Eight Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Eighty

curing complete including the cost of form work but excluding

31 C.M. 120.00 6089.29 Nine Rupees and

reinforcement of reinforced concrete work in : (F) Chhajjas: At All

Twenty Nine Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Six

curing complete including the cost of form work but excluding

Hundred Fifteen

32 reinforcement of reinforced concrete work in : (G) Staircases at C.M. 24.00 6615.50

Rupees and Fifty

Ground Floor (upto floor two level.) Ground Floor

Providing and laying controlled cement concrete work M250 and Six Thousand Six

curing complete including the cost of form work but excluding Hundred Fifty Six

reinforcement of reinforced concrete work in : (G) Staircases at All Rupees and Ninety

Floor One Paise

Providing and laying controlled cement concrete work M200 and

Six Thousand Three

curing complete including the cost of form work but excluding

Hundred Ninety Six

34 reinforcement of reinforced concrete work in : Coping At All floor C.M. 38.00 6396.33

Rupees and Thirty

Providing ISI Mark TMT FE-500 bar reinforcement for R.C.C. work Seventy Seven

35 including bending and placing in position comp. upto floor two kg 38304.00 77.29 Rupees and Twenty

level : At All Floor Nine Paise

Providing ISI Mark TMT FE-500 bar reinforcement for R.C.C. work

Seventy Nine Rupees

36 including bending and placing in position comp. upto floor two kg 251512.50 79.39

and Thirty Nine Paise

level : At All Floor

Providing and laying block masonary using 230 mm thick AAC block

[autoclaved aerated concrete block] having crushing strength 3-5 Six Thousand Two

37 N/mm2 , using readymade premix tensile adhesive mixture etc C.M. 297.00 6263.01 Hundred Sixty Three

complete as directed by Engr Incharge : (At Ground Floor ) Rupees and One Paisa

Providing and laying block masonary using 230 mm thick AAC block

[autoclaved aerated concrete block] having crushing strength 3-5 Six Thousand Three

38 N/mm2 , using readymade premix tensile adhesive mixture etc C.M. 653.00 6305.43 Hundred Five Rupees

complete as directed by Engr Incharge : At All Floor and Forty Three Paise

Providing and laying block masonary using 100 mm thick AAC block

[autoclaved aerated concrete block] having crushing strength 3-5 Seven Hundred Five

39 N/mm2 , using readymade premix tensile adhesive mixture etc S.M. 412.00 705.99 Rupees and Ninety

complete as directed by Engr Incharge. At Ground Floor Nine Paise

Providing and laying block masonary using 100 mm thick AAC block

[autoclaved aerated concrete block] having crushing strength 3-5 Seven Hundred

40 N/mm2 , using readymade premix tensile adhesive mixture etc S.M. 397.00 712.19 Twelve Rupees and

complete as directed by Engr Incharge : At All Floor Nineteen Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar One Hundred Sixty

1:4 (1-cement :4-sand) : (A) for wall and similar surfaces ( At S.M 3010.00 165.02 Five Rupees and Two

Ground Floor) Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto One Hundred Eighty

floor two level and finished even and smooth in (ii) Cement mortar S.M 5196.00 189.59 Nine Rupees and Fifty

1:4 (1-cement :4-sand): (A) for wall and similar surfaces (At All Nine Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

One Hundred Forty

43 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4- S.M 1001.00 148.00

sand) : (B) for ceilings and soffits of stairs (At Ground Floor)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and One Hundred Seventy

44 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4- S.M 3439.00 170.39 Rupees and Thirty

sand) : (B) for ceilings and soffits of stairs At All Floor Nine Paise

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat Three Hundred

45 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of S.M 10025.00 315.69 Fifteen Rupees and

C.M. 1:1 (1-cement : 1-sand) etc. complete (All Floor) Sixty Nine Paise

Providing throating or plaster drip and moulding to R.C.C. Chajja

Forty Three Rupees

46 R.M 866.00 43.74 and Seventy Four

Providing and applying 20mm. thick cement plaster patta of c.m.

Fifteen Rupees and

47 1:3 ( 1cement : 3 sand ) etc. comp :All Floors R.M 809.00 15.15

Prov.20mm deep finished groove ..etc.comp Ten Rupees and Ten

Providing cement vata ( 10 cm x 10 cm size ) quarter round in

Twenty Four Rupees

cement mortar 1:1 including neat cement finishing, watering etc.

49 R.M 34.65 24.28 and Twenty Eight

Providing & laying "36 x 36" Vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse

sand) or L.M 1:1.5 laid on new surface or fixing on existing flooring One Thousand Five

by adhesive material including dismentalling of existing flooring and Hundred Thirty One

jointed with colour cement slurry including finished with S.M 1238.00 1531.82

Rupees and Eighty

flushpointing & cleaning the surface etc. completefor light shade : Two Paise

Providing and laying light shade vitrified tiles 8 mm to 10 mm thick One Thousand One

in skirting , risers of steps and dedo on 10 mm thick cement plaster Hundred Fourteen

1:3 (1 Cement : 3 Coarse Sand) & jointed with white cement Slurry : Rupees and Nine

At all Floors Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material One Thousand Three

including dismentaling of existing flooring and jointed with color Hundred Thirty One

cement slurry including finised with flush pointing & cleaning the Rupees and Twenty

surface etc. complete for antiskit : At all Floors Two Paise

Providing & Laying 600x600 Matt Vitrified tiles 8 to 10mm thick in

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing flooring One Thousand Six

by adhesive material including dismentaling of existing flooring and Hundred Seventy Five

jointed with color cement slurry including finised with flush S.M 356.00 1675.59

Rupees and Fifty Nine

pointing & cleaning the surface etc. complete as per approvel & Paise

selection by architect/engineer in charge.

Providing & laying 600mm x 600mm Matt Vitrified tiles of 8 to

10mm thick in skirting,riser of steps & dedo laid on bed of 10 mm One Thousand Four

(Average) base of cement mortar 1:3 (1 Cement : 3 Coarse sand) Hundred Fifty Seven

thick & jointed with white cement slurry etc. complete as per Rupees and Forty

approvel & selection by architect/engineer in charge. Three Paise

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and One Thousand

55 jointed with grey cement slurry mixed with pigment to match the S.M 79.00 1019.39 Nineteen Rupees and

shade of slab including rubbing and polishing etc. complete. (A) Thirty Nine Paise

25mm thick : At all Floors

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement One Thousand Two

mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray Hundred Twenty Six

cement slury mixed with pigment to match the shade of slab Rupees and Forty Six

including rubbing and polishing etc. complete : At all Floors Paise

Providing and laying Granite slab (18 mm thick) one side polished

Two Thousand Seven

flooring over 20 mm (average) base of cement mortar 1:6 (1

Hundred Forty One

57 cement : 6 coarse sand) or L.M 1:1.5 laid and jointed with grey S.M 267.00 2741.14

Rupees and Fourteen

cement slurry including rubbing and polishing complete : At all

Providing and laying polished granite stone slab 18 mm thick in

Two Thousand Nine

risers of steps, dedo and pllars laid on 10 mm thick cement mortar

Hundred Fifty Eight

58 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry S.M 878.00 2958.29

Rupees and Twenty

including rubbing & polishing etc. Complete : At all Floors

Providing and fixing 35 mm thick solid core flush door of approved

make both side lamination using 1mm thick approved laminate

sheets with 6mm thk Lipping/border patti around flush hutter

including fixing SS hinges, 6 no. - hold fast of size 40 x6mm

flat 300 mm long, wedges, keys, nails, catch screw, lever latches

, handle(10 cm), aldrop(20 cms), stoppers(20 cms), etc and Two Thousand Three

cutting/ drilling of necessary holes in masonry/ concrete and Hundred Seventy

grouting of holdfasts with (1:2:4) cement concrete all as per S.M 209.00 2374.51

Four Rupees and Fifty

drawing, specification and direction of the Engineer, all materials, One Paise

tools,plant and labour complete c. (All fixtures & fittings shall

be stainless steel of approved quality).approved by

architect/Engineer Incharge : At all Floors

Providing and fixing window having extruded Aluminium colour

anodized Section Frame main Outer Size 63.5mm x 38.1mm x

1.95mm( of Jindal Section No. 4605 @ Wt. of 1.094 Kg./Mt.)

Horozontal Two track member size 61.85mm x 31.75mm x

1.20mm(of Jindal Section No. 8687, @ Wt. 0.695Kg./Mt.) Vertical

Member of size 61.85mm x 31.75mm x 1.30mm (of Jindal Section

No. 8758, @ Wt. 0.659 Kg./Mt.) with sliding shutters of Horizontal One Thousand Seven

member size 40mm x 18mm x 1.29mm(of Jindal Section No. 8947 Hundred Thirteen

60 @ Wt. of 0.456 Kg./Mt.) Vertical Member of size 40mm x 15mm x S.M 12.00 1713.70

Rupees and Seventy

1.29mm (of Jindal Section No. 8948 @ Wt. of 0.457 Kg./Mt.) with Paise

5mm thick transparent bronze colour tinted float glass with powder

coated Aluminium fittings & fixtures & trasparent silicon sealant

glass fixing to frame as per detail etc. complete.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40mmx18mm One Thousand Five

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical Hundred Eighty Three

61 member of size 40mm x 18mm x 1.29 mm (of Jindal Section S.M 314.00 1583.95

Rupees and Ninety

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze Five Paise

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc : At all Floors

Pro.& Fixing standard extruded of alluminium section of size 63mm

x 38.10mm x 1.2 mm(of jindal Section No.2434, @ Wt 0.643 One Thousand One

kg/Rmt) with colour anodized alluminium frame for Ventilation Hundred Seventy Five

with 5 mm thick frosted glass as detail etc complete for Ventilation Rupees and Fifty Six

: At all Floors Paise

Providing and fixing fully fixed stainless grill using 50mm x 8mm (SS

304) stainless steel flats vertical 50mm X 8 mm stainless steel lats Four Thousand Three

horizontal,16 mm diameter rounnd stainess steel bar at 120 mm Hundred Forty Seven

center to center fixedto S.S.flats necessary S.S screws and other S.S Rupees and Four

fittings etc.complete. Paise

Providing and fixing M.S. grills of required pattern to

marble/granite frames of window etc. with M.s. flats at required

spacing and frames alround, square or round bars fixed with round

headed bolts and nuts or by screws, including oil painting with one One Hundred Seven

coat of primer of approved quality and brand & two coats of kg 8862.00 107.06

Rupees and Six Paise

synthetic enamal oil paint etc. complete as per detail drawing and

as directed by Engineer in charge : At all Floors

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats

of primer of approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the surface Forty Rupees and

free from mortar dropping and other foreign matter and sand Fifty Nine Paise

papered smooth : All floors

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from Eighty Three Rupees

mortar droppings and other foreign matter and sand papered and Eighteen Paise

smooth : (A) for wall and similar surfaces (All floors)

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from Eighty Eight Rupees

67 S.M 4440.00 88.87 and Eighty Seven

mortar droppings and other foreign matter and sand papered

smooth : (A) for wall and similar surfaces (All floors) Paise

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after One Hundred Twenty

68 thoroughly brushing the surface to remove all dirt, and remains of S.M 11674.00 120.26 Rupees and Twenty

loose powdered materials.etc complete Six Paise

Providing & applying single coat of textured at external surface at

all floor levels with three coats of weather proof exterior emulsion

paint of approved standard brands at outer side of the building on

RCC or Masonary walls. Rate to include for all labour, materials,

staging, scaffolding, cleaing, curing etc. application of texture after

throughly brushing th`e surface to give an even shade free from Six Hundred Twenty

mortar dropping/other foreign matter etc. complete. application of S.M 6807.00 624.89 Four Rupees and

textures & paints must be as per company's standard instructions. Eighty Nine Paise

Texture and colour selection as per approved by engineer in

charge. All Type Textured

Painting two coats (including priming coat ) on new steel & other

One Hundred Twenty

metal surfaces with enamel paint brushing interior to give an even

70 S.M 33.00 128.62 Eight Rupees and

shade including cleaning the surface of all dirt , dust & other foreign

Sixty Two Paise

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of Eight Thousand Eight

red lead paint. (A)In beams and joists, channels angles Tees, flats, Hundred Thirty Seven

with connecting plates or angle cleats as in main and cross beams. Quintel 13.20

Rupees and Fifty

Hip and jack rafters, purlins conneted to common rafters and the Paise

Providing and laying and fixing 25 mm thick expansion joint by

Seven Hundred Forty

hydro cell semi rigid UV resistance with high performance

72 S.M 762.00 745.51 Five Rupees and Fifty

laminated closed cell polythene foam joint filler in sheet foam as

directed, etc. complete : All floors

Providing and fixing 25 cm Wide & 3mm thick exterior composite

One Thousand Fifty

panel on existing expansion joint horizontally & vertically with all

73 S.M 147.00 1054.34 Four Rupees and

material, hardware, acessories & fittings etc completed (All floors)

Thirty Four Paise

Providing cinder filling in sunken floors including watering,

Five Hundred Twenty

consolidating, ramming complete.

74 Cu.Mt. 81.00 522.68 Two Rupees and Sixty

Providing and fixing 150 mm wide, approved quality chicken wire

mesh at junction of brick work and RCC work or two dissimilar

surfaces, at all heights fixed by nails, rowal plugs or tag by cement Sixty Rupees and

mortar 1:3 before applying the plaster, including curing, scaffolding Sixty Paise

all complete as directed.

Providing and fixing Stainless Steel railing having 50 mm x16G ASIS

304 Grade dia hollow stainless steel pipe as hand rail and 32x32

mmx16G ASIS 304 Grade sq. hollow stainless steel pipe with

combination of 10 cm long 16 mmx16G ASIS 304 Grade dia pipe as

vertical supports 16 mm x16G ASIS 304 Grade dia hollow stainless

steel pipes as intermediate members running through stainless Five Thousand Four

steel 30 mm dia solid runners having threaded screw to fix the S.M 100.00 5405.52 Hundred Five Rupees

runner with vertical suppoet including cutting bending w=elding & and Fifty Two Paise

fabrication the structure as per drawing including finishing etc

Providing and fixing Semi unitized vision panel with glazed units

(SGU)of size as per design and consisting of 6 mm thick

(toughened)glass approved by the architect. with mullion

(101mmx57mmx1.8mm, 8.9 kg/12 rft), transum

(63mmx57mmx1.8mm, 5.8 kg/12 rft), sub frame

(54mmx22mmx1.25mm, 2.4kg/12 rft), with anodizing,with m.s. hot

deep galvanized bracket,with s.s. hardware The glazed panel to be

formed by means of imported special structural quality silicon Six Thousand Eight

adhesive sealant layer manufactured by M/s. Dow Corning 995 USA Hundred Sixty One

77 with material:- silicone dowcorring 789weather silicone in 995 dow S.M 555.00 6861.94

Rupees and Ninety

corring.It includes cost of labour, materials, accessories, Four Paise

adhesives,all required M.S FABRICATIONS, scaffolding, wastages,

transport, taxes, fixing into a neat finish in aesthetic point of view,

without any undulations in facias all complete as per drawing and

Instruction of engineer in-charge.

(Top hung or Pivoted Openable part) of size (1.15m. x 1.85m)

Providing and fixing openable hardware for glazing as per detail ,It

includes cost of labour, materials, accessories,aII required M.S Twenty Two

FABRICATlONS,adhesives, scaffolding, wastages, transport, taxes, Thousand Seven

78 fixing into a neat finish in aesthetic point of view, without any No 60.00 22775.50 Hundred Seventy Five

undulations in facias all complete as per drawing and Instruction of Rupees and Fifty

engineer in-charge. Paise

GMC LOGO - OUTSIDE

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm

acrylic on top of brand Ptglass, astari etc, including led lights with

all laser and cnc work, including all material, labour, 25 mm ss studs One Lac Seventy Six

79 for mounting and other hardwares, waste of materials etc and No 9.00 176750.00 Thousand Seven

complete the work satisfactorily as per instruction of architect or Hundred Fifty Rupees

Engineer-in charge. (Basic size of logo is 2.5 mt X 2.5 mt)

Aluminium Composite panelling to drop-fin and front column, etc:

Supply & fixing of Aluminium Composite Panel (ACP), 3 mm thick in

required colours for interiors/exteriors consisting of two layers of

aluminium skins of 0.25 mm thick sandwiching a thermo plastic

core in continuous lamination process with PVDF coating for

interior/exterior grades ensuring long colour and no fungal attacks.

Base frame work with aluminium sections of 65mm X 25mm shall

be fixed over the brick work and the above aluminium panels shall Two Thousand Three

be fixed to the frame work as cladding with material:- silicone Hundred Ninety Eight

dowcorring 789weather silicone in 995 dow corring.It includes cost Rupees and Seventy

of labour, materials, accessories, adhesives, scaffolding, wastages, Five Paise

transport, taxes, fixing into a neat finish in aesthetic point of view,

without any undulations in facias all complete as per drawing and

Instruction of engineer in-charge.

Providing & Fixing Cubicle System of MODLE TYPE - TITAN SS

SERIES of Cubicle size 1000mm (W) X 1550mm (D) X 1980mm (H)

having 12 mm thick Compact Laminate HPL Boards of Single Color

with Door Size : 1750mm (H) X 610mm (W) & Overall Height Of

Cubicle 1980mm (Including bottom Gap of 150mm) including

Accessories of Standard – Merino Make Stainless Steel - 304 Grade)- Twenty Five

81 SS “U” Channel, SS “F” channel, SS Top Rail, SS Coat Hook , SS No. 60.00 25250.00 Thousand Two

Privacy Thumb turn c/w Occupancy Indicator, SS Door Knob, SS Hundred Fifty Rupees

Hinges with Cover, SS Adjustable Foot - 316 Grade, Rubber Lining

for Groove, S.S.Screws 304 G & P.V.C Wall Plugs etc. complete

approved by architect/Engineer Incharge.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring Seven Hundred

82 mortar creme out upto surface using white cement including S.M 2820.00 779.70 Seventy Nine Rupees

rounding off junctions and extending them upto 15 cm along the and Seventy Paise

wall,clearing with water and oxalic acid etc. as directed.

Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using

kg/ sqm of cement admixed with proprietary water proofing

compound conforming to IS : 2645 over the R.C.C. slab including

cleaning the surface before treatment.

(b) Laying cement concrete using broken bricks\brick bats 25 mm

to 100 mm size with 50 % of cement motar 1:5 ( 1 Cement :

Coarse sand ) admixed with proper water proofing compound Seven Hundred

83 confirming to IS : 2645 over 20 mm thick layer of cement mortar of S.M 2905.00 700.94 Rupees and Ninety

mix 1: 5 (1 cement : 5 Coarse sand ) admixed with proprietary Four Paise

water proofing compound confirming to IS : 2645 to required slope

and treating similarly the adjoining walls upto 300 m height

including rounding of junction of walls and slabs.

(C) after two days of proper curing applying a second coat of

cement slurry admixed with proprietary water proofing compound

conforming to IS:2645

(d) finishing the surface with 20 mm thick jointless cement mortar

of mix 1:4 (1 cement : 4 coarse sand) admixed withproprietary

water proofing compound conforming to IS: 2645 and finally

finishing the surface with neat cement slurry and making of 300 x

Providing & fixing wash down water closet European type W.C. pan

with integral 'P' or 'S' trap incl jointing the trap with soil pipe in

cement motar 1:1 (1cement : 1fine sand ) having following

additional accessories : (A) vitrious china pattern- I in white One Thousand Six

colour,(a) G.I. inlet connection for flush pipe with W.C. pan,(b) Hundred Seventy Five

plastic seat & cover for wash down water closet with c.p brass Rupees and Twenty

hinges and rubbers buffers of colour match to the E.W.C.pan on Two Paise

Providing and fixing washbasin with single hole for pillar trap at all

floor level with C.I. or M.S. Brackets painted white including cutting

holes and making good the same including (A) Vitreous china flat

back wash basin 550mm x 400mm size in white colour (a) providing

and fixing C.P. brass waste for wash basin or sink(A) 32mm (b)

providing and fixing M.I.fisher union for wash basin or sink(A) Two Thousand Four

85 32mm (c) piller tap,capstan head, screw down high pressurewith No 35.00 2459.06 Hundred Fifty Nine

screw shanks and back nuts for 15mm dia. for all floor (d)brass Rupees and Six Paise

screw down stop tap (e)Rubber plug for sink or washbasin (f)

chromium plated bottle trap with necessary coupling of approved

quality for wash basin (All floor)

Providing & fixing 600 mm. x 450 mm. mirror of superior glass at all

Eight Hundred Fifty

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet &

86 No 35.00 859.41 Nine Rupees and

fixed to wooden plugs with C.P. brass screws and washers etc. for

Forty One Paise

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc. complete : (A) White

87 No 30.00 1074.86 Seventy Four Rupees

earthenware flat back or corner type size 430mm x 260mm x

and Eighty Six Paise

Providing and fixing PVC SWR Nanhi trap IS 14735 for drain -100

mm diameter with jali of the following nominal diameter of self Five Hundred Ninety

88 cleaning design with C.I scead down or hinged grating including the No 156.00 599.64 Nine Rupees and Sixty

cost of cutting and making good the wall (All floor) Four Paise

Providing and fixing to wall ceilling and floor 10.0 kg/cm2 working

pressure polythelene pipes of the following outside dia. low density Two Hundred Eighty

89 complete with special flage compression type fitting, wall clips etc. No 273.00 280.23 Rupees and Twenty

including making good the wall ceilling floor : (F) 75 mm dia Three Paise

Providing and fixing to wall ceilling and floor 10.0 kg/cm2 working

pressure polythelene pipes of the following outside dia. low density Three Hundred Thirty

90 complete with special flage compression type fitting, wall clips etc. No 290.00 339.05 Nine Rupees and Five

including making good the wall ceilling floor (G) 110 mm dia Paise

Two Hundred Eighty

91 No 213.00 280.23 Rupees and Twenty

Providing and fixing S.W. Gully trap with C.I. gratting brick

One Thousand Two

masonary chamber and water tight C.I. cover with frame of

Hundred Ninety Two

92 300mm. x 300mm. size with standard weight (i) square mouth No 23.00 1292.19

Rupees and Nineteen

trap(A) 100mm x 100 mm size- P-type

Constructing brick masonary for under ground C.I. inspection

chamber and bends with bricks having crushing strength not less

than 35 kg/cm2 in c:m 1 :5 C.I. cover with frame 445mm x 610mm

internal dimension total weight of cover with frame to be not less

than 38 kg.(wt. or cover 23 kg. and wt of frame 15 kg.) R.C.C. top Two Thousand Nine

slab with 1:2:4(1 cement :2 course sand : 4 grade stone aggregate Hundred Thirty Two

20mm size) foundation concrete 1: 5: 10 inside plaster 15 mm thick No 84.00 2932.93

Rupees and Ninety

with cement mortar 1: 3 finished smooth with a floating coat of Three Paise

neat cement on walls and bed concrete etc. comp. (i) inside

dimension 455mm X 610mmX 450mm deep

Providing,& laying(to level or slopes) and joining R.C.C NP2 CLASS

pipe in C.M 1:1 of following nominal internal diameter with collars Two Hundred Fifty

94 and butt ends prepared for collar joints including testing of pipes R.M 959.63 257.19 Seven Rupees and

and joints etc. Complete : (B) 150 mm dia. Nineteen Paise

Providing and laying and jointing in tube line and level 15 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as Seventy Two Rupees

directed including necessary fitting etc. including testing of pipe R.M 166.00 72.65

and Sixty Five Paise

and joints and fixing the same with adhesive solvent, including cost

of all materials : (A) 15mm. dia.

Providing and laying and jointing in tube line and level 25 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as Ninety One Rupees

directed including necessary fitting etc. including testing of pipe R.M 594.00 91.84

and Eighty Four Paise

and joints and fixing the same with adhesive solvent, including cost

of all materials : (c) 25mm. dia.

Providing and laying and jointing in tube line and level 40 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting of PRINCE/ SUPREME/

ASTRAL/ FINOLEX make or equivalent as approved by engineer In

charge. Pipe shall be fixed on the wall with the help of clamp at One Hundred Forty

97 every two meter C/C or shall be concealed as directed including R.M 1107.00 148.12 Eight Rupees and

necessary fitting etc. including testing of pipe and joints and fixing Twelve Paise

the same with adhesive solvent, including cost of all materials : (e)

Providing and fixing C.P brass screw down bib tap at all floor level

One Hundred Eighty

polished bright etc. comp.

98 No 90.00 186.83 Six Rupees and Eighty

Providing and fixing gun metal check or non return full way wheel Six Hundred Sixty

99 valve at floor levels,etc. complete : (E) 40mm. dia. No 20.00 663.43 Three Rupees and

Forty Three Paise

Providing and fixing chromium plated brass half turn flushcock at all

floor level, of approved quality incl. fixing in pipe line etc. comp : (ii) Two Hundred Sixty

100 25mm. dia. No 41.00 263.77 Three Rupees and

Seventy Seven Paise

Providing and fixing abonite ball cock of approved quality as One Hundred Two

101 directed etc. comp : (A) 25mm. dia. No 13.00 102.91 Rupees and Ninety

Providing and fixing 10.0 kg/cm2 working pressure polythelene

Three Hundred Thirty

pipes of the following outside dia. low density complete with

102 R.M 335.40 339.05 Nine Rupees and Five

special flage compression type fitting, wall clips etc. (B) 110 mm

Providing & fixing G.I. Rain water spout of 50 mm dia & 30 cm One Hundred One

103 length etc (all floor level) No 43.00 101.91 Rupees and Ninety

Providing and fixing in position P.V.C. cowl vent to pipes of prince, Five Hundred Five

104 suprim, jain make etc. comp :100 mm dia No 21.00 505.17 Rupees and

Seventeen Paise

Providing erecting and fixing double coated Syntex or equivalent

PVC (ISI) mark water tank of reqd capacity each with all necessary Three Rupees and

fitting and connection etc. comp on terrace. Ninety Five Paise

Supplying and planting of good quality nodes of specified grass for

dibbling: It includes the cultivation of dround to a depth of 150mm,

Planting (2”-3" apart) of grass as per drawing without disturbing

Two Hundred Twenty

the desired gradient and level, watering, maintaining (forking,

106 S.M. 1725.00 224.22 Four Rupees and

mowing, weeding, fertilizer application, pest control etc.) it for a

Twenty Two Paise

period of 3 months from the date of lawn dibbling/plantation.

Doob grass(dibbling)

Shrubs/Ground covers

Supplying and planting healthy shrubs of different species of

450mm to 900 mm height: by using the soil/ manure (either carted

or supplied), and watering it immediately. Maintaining( application

of liquid manures/ growth regulators/ pesticides as per need, Two Hundred Twenty

107 weeding and gap filling regularly so as to keep the plant healthy all No 1380.00 227.25 Seven Rupees and

the time) it for a period of 6 months from the date of plantation- Twenty Five Paise

Ixora Pink,Ixora Red, Ixora Yellow,Ixora White or as per selection of

Engg. in charge/Architect.

Supply and planting of trees (1.5m to2.0m height):

Digging a tree pits of size –0.9 mt. X0.9 mt. X1.0 mt., Supplying and

filling of tree pit with dry paddy husk up to 100mm from bottom of

the pit. providing and planting a tree sapling by using the soil/

manure (either carted or supplied ), staking/ propping it with Nine Hundred Fifty

108 bamboo stick using jute string and watering it immediately. Making No 123.00 959.50 Nine Rupees and Fifty

basin around ( 3' dia) and maintaining( application of liquid Paise

manures/ growth regulators/ pesticides as per need, weeding and

gap filling regularly so as to keep the plant healthy all the time) it

for a period of 3 months from the date of plantation.

Box cutting the road surface to proper slope & camber for making a

One Hundred Nine

base for road work including removing the excavated stuff, and

109 C.M. 2669.00 109.24 Rupees and Twenty

depositing on the road side slopes as directed up to 50 Mt. Lead

Rolling and Consolidating of soling including filling in depression

which occurs during the process with power roller 8 tonne to

tonne. and compacting the bed as per specifications to core test Twenty Two Rupees

110 S.M. 9994.00 22.75 and Seventy Five

97% compacting complete in all respects to the entire satisfaction

of the Engineer-in -charge. Paise

Providing and fixing pre- cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30 cm height and 15cm thick of

250 grade concret as per approved design and including excavation Three Hundred

111 for fixing in proper line and level, fillig the joint with C: M 1:3 ( 1 R.M. 1898.00 374.92 Seventy Four Rupees

Cement : 3 Fine Sand) etc. complete and Ninety Two Paise

Providing, laying, spreading and consolidation graded stone

aggregate to wet mix macadam 150mm compacted thick as per

MORT & H specifications including premixing the material with One Thousand Nine

water at OMC in mechanical plant carriage of mixed material by Hundred Eighty

tippers to site, laying in uniform layers with paver in sub base/ base C.M. 1242.00 1980.61

Rupees and Sixty One

course on well prepared surface and compacting with vibratory Paise

roller to achieve the desired density

Providing & laying of specified compacted thickness Granular sub

base (GSB) in specified grading in table 400-1 of the specification

MORT&H and compactor to the required density with 8 - 10 tonne

vibratory roller with plain drum or heavy pneumatic tyred roller of

minimum 200 to 300 KN weight in all seasons as per MORT&H

maintaining the required slope & grade during the operation as

approved by the engineer in charge & watering to the proper One Thousand Four

Hundred Fifty Two

113 moisture content and sprinkled with the help of truck mounted C.M. 781.00 1452.38

water tank fitted with suitable arrangement .( fully saturated Rupees and Thirty

having CBR value greater or equal to 30) compacted thickness of Eight Paise

150 mm consisting of Machine crust stone aggregate as per grading

1 in table 400-1 of the specification MORT&H fifth Revision

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Seven Hundred Six

114 Confirming to IS 15658 : 2006 including 35 mm Sand layer for S.M. 1838.00 706.90 Rupees and Ninety

levelling and filling the joint with sand in proper line and level as per Paise

guidlines of IRC : SP 63-2018 etc. Complete.

Dry Lean Cement Concrete Sub- base (Construction of dry lean

cement concrete Sub- base over a prepared sub-grade with coarse

and fine aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm, aggregate cement ratio not to

exceed 15:1, aggregate gradation after blending to be as per table

600- 1, cement content not to be less than 150 kg/ cum, optimum Two Thousand Two

115 moisture content to be determined during trial length construction, C.M. 664.00 2204.60 Hundred Four Rupees

concrete strength not to be less than 10 Mpa at 7 days, mixed in a and Sixty Paise

batching plant, transported to site, laid with a paver with electronic

sensor, compacting with 8-10 tonnes vibratory roller, finishing and

Cement Concrete Pavement: Providing and Laying of un-reinforced,

dowel jointed, M40 pavement cement concrete pavement over a

prepared sub base with 53 grade cement with coarse and fine

aggregate conforming to IS 383, maximum size of coarse aggregate

not exceeding 25 mm, mixed in a batching and mixing plant as per

approved mix design, transported to site, laid with a fixed form or Seven Thousand Two

slip form paver, spread, compacted and finished in a continuous Hundred Four Rupees

operation including provision of contraction, expansion, C.M. 1327.00 7204.33

and Thirty Three

construction and longitudinal joints, joint filler, separation Paise

membrane, sealant primer, joint sealant, debonding strip, dowel

bar, tie rod, admixtures as approved, curing Compound, finishing

Supplying of crushed stone aggregates, chippings etc. of hard stone

Five Hundred Forty

of following nominal size free of disintegrated pieces deletarious

117 C.M. 6.00 545.63 Five Rupees and Sixty

and oraganic mater and grading as per I.R.C. Code.(iii) 25mm

Supplying of crushed stone aggregates, chippings etc. of hard stone

Four Hundred Eighty

of following nominal size free of disintegrated pieces deletarious

118 C.M. 12.00 482.53 Two Rupees and Fifty

and oraganic mater and grading as per I.R.C. Code.(ii) 40mm

Spreading the stone aggregate including filling the interstices to

Two Hundred Sixty

required camber and gradient (excluding spreading of Blindage)(iii)

119 C.M. 18.00 268.92 Eight Rupees and

25mm to 50mm size crushed stone

Ninety Two Paise

Drilling 300 mm dia pilot bore at above site in all strata by mud

Seven Hundred Fifty

flush direct rotary rig/reverse rotary rig. From 0.00 mt to 220 mt .

120 R.M. 1326.00 756.49 Six Rupees and Forty

Reaming of 300 mm dia bore hole including assembling , jointing

Two Hundred Sixty

lowering housing casing strainer pipes and gravel and assemble

121 R.M. 720.00 263.61 Three Rupees and

item with gravel packing and clay packing 500 mm dia hole for

Sixty One Paise

Reaming of 250 mm dia bore hole including assembling , jointing

Four Hundred Sixty

lowering housing casing strainer pipes and gravel and assemble

122 R.M. 606.00 465.61 Five Rupees and Sixty

item with gravel packing and clay packing 550 mm dia hole for

Supply of clay ball having Size of 25 mm to 50 mm

Seven Hundred Fifty

123 C.M. 60.00 758.51 Eight Rupees and Fifty

Supply of gravel of Selected Size 4 mm to 10 mm

Two Thousand Forty

124 C.M. 90.00 2049.29 Nine Rupees and

Twenty Nine Paise

Supply of Cement

Six Thousand Three

125 M.T. 1.50 6365.02 Hundred Sixty Five

Rupees and Two Paise

Cement Sealling

Thirteen Thousand

Four Hundred Five

Rupees and Seventy

Lowring of drop line & air line : Lowring 100 mm dia. Dropline and

32 mm GI air line for devlopment of each water bering zone coming

Thousand Fifty Four

127 acros the full depth of tube well for each zone Job 3.00 28054.77

Rupees and Seventy

Lowring of drop line & air line : Lowring 200 mm dia. Dropline (Blind

One Hundred Forty

& Slotted pipe) and 32 mm GI air line for devlopment of each water

128 R.M. 720.00 149.48 Nine Rupees and

bering zone coming acros the full depth of tube well for each zone

Forty Eight Paise

Supply and delivery of PVC blind pipe 200 mm dia as per IS: 12818 Seven Hundred

Ninety Six Rupees

Supply and delivery of PVC slotted pipe 200 mm dia as per IS:

Eight Hundred Forty

130 R.M. 300.00 848.40 Eight Rupees and

Supply of (A) M.S. bore clamp -for 300 mm dia. Pipe

Two Thousand Four

Hundred Eighty Five

Rupees and Sixty One

Supply of (B) M.S. bore Plug-for 250 mm dia. Pipe

Two Thousand One

Hundred Seventy

Three Rupees and

Fifty Two Paise

Supply of (C)M.S. bail plug.-for 300 mm dia. Pipe

One Thousand Three

Hundred Twenty Nine

Rupees and Sixteen

Supply of (D) Steel bent plats -for 300 mm dia. Pipe size-200 X 150 X Ninety One Rupees

134 6 mm. No. 6.00 91.71 and Seventy One

Development of tube well : Development of tube well zonewise Twenty Two

with 1100 CFM / 300 PSI + Air Compressor up to avalibility of sand Thousand Four

135 free discharge . The air Compressor should run minimum for Six of L.S. 3.00 22427.05 Hundred Twenty

up to avalibility of Sand free discharge . Seven Rupees and

Electrologing test for tub well . Twelve Thousand One

136 Job 3.00 12120.00 Hundred Twenty

Supply of ERW 250 mm dia. Blank pipe IS 3589 (7 mm thick. )

Three Thousand Six

137 R.M. 366.00 3605.70 Hundred Five Rupees

and Seventy Paise

Supply of ERW 250 mm dai. V wire Strainer pipe heavy duty slot Two Thousand Five

size 1.00 mm Hundred Fifty Nine

Rupees and Thirty

0 Supply of bore material for 250 mm dia. Pipe 0.00 0.00 0.00 No Rupees

(A) M.S. bore clamp

Two Thousand Thirty

139 No. 3.00 2037.91 Seven Rupees and

Ninety One Paise

(B) M.S. bore Plug

One Thousand One

Hundred Sixty One

Rupees and Sixty Two

(C)M.S. bail plug. One Thousand Sixty

141 No. 3.00 1065.02 Five Rupees and Two

(D) Steel bent plats Ninety One Rupees

142 No. 3.00 91.71 and Seventy One

Providing Electric moter driven submersible pump set 3PHASE Twenty One

Capacity about 7.5hp having 135 LPM discharge @ 120 mt. head Thousand Nine

143 sutibal for 100 mm dai. Delivery pipe catagery 2.2 No. 3.00 21990.30 Hundred Ninety

Rupees and Thirty

Providing & fixing control penal bord sutibal for above submersible

Eight Thousand Four

pump set-D. O. L. up to 7.5 HP

Hundred Sixty Six

Rupees and Eighty

Providing & fixing PVC insulated round submersible cable 1R x 3 C x

One Hundred Eighty

145 Rmt 645.00 180.79 Rupees and Seventy

Manufacture, Supply and Delivery of 80 mm Nominal dia UPVC

Column Pipes including PVC Socket (Coupler), Density of Pipe 1.38 Four Hundred Three

146 to 1.43 Gm per Cm3 , OD : 87.5 TO 88.2MM, Wall Thickness End : Rmt 606.00 403.66 Rupees and Sixty Six

9.8mm to 11.9mm, Berral : 7.3mm to 9.0mm, Length: 3 Mtrs. Paise

Providing and supplying in standard length ISI mark high density

Polyethylene H.D.P.E. Pipes suitable for potable water as per IS

Specification no. 4984/1995 including all local and central taxes, Three Hundred Eighty

147 transportation, freight charges, octroi, inspection charges, loading, Rmt 606.00 380.77 Rupees and Seventy

unloading, conveyance to the dept. stores etc. comp. 110 Seven Paise

dia.10kg/cm2 pressure

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to Eight Hundred

148 R.M. 30.00 876.90 Seventy Six Rupees

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant. and Ninety Paise

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit joint

including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, Nine Hundred Twenty

transportation,freightcharges,octroi,inspection charges, loading, R.M. 300.00 929.20 Nine Rupees and

unloading, conveyance to the departmental stores and including Twenty Paise

cost of jointing meterial etc. complete.Test Pressure 10 Kg/cm2

(160mm dia. pipe)

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit joint

including cost of rings, as per IS specification no. 4985/1988 One Thousand Four

including all local and central taxes, Hundred Forty Nine

transportation,freightcharges,octroi,inspection charges, loading, R.M. 360.00 1449.35

Rupees and Thirty

unloading, conveyance to the departmental stores and including Five Paise

cost of jointing meterial etc. complete.Test Pressure 10 Kg/cm2

(200mm dia. pipe)

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

conveyance from stores to site of works including cost of labour, Twenty Eight Rupees

151 R.M. 300.00 28.28 and Twenty Eight

material, cement solvent, giving satisfactory hydraulic testing as

per ISI code (160mm dia. pipe) Paise

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

conveyance from stores to site of works including cost of labour, Thirty Seven Rupees

152 R.M. 360.00 37.37 and Thirty Seven

material, cement solvent, giving satisfactory hydraulic testing as

per ISI code (200mm dia. pipe) Paise

WOODEN PARTITION

Providing and fixing of full height solid sandwitch partitions (AS

PER DRAWINGS) using 50 x 50 mm aluminium pipe for framing

(minimum grid size of 600 mmx 600mm ), 12mm ply (both sides)of

brand greenply ecotech mr,century sainik mr,srg etc, teak wood

beading patti etc. making of rebates and including all hardware Three Thousand Six

Hundred Sixty Nine

153 items, groove (if shown)50 MM TK , 24 kg density insulation if Sq. Mt 150.00 3669.58

required,with all materials,hardwares,ss or powdercoated screws, Rupees and Fifty Eight

labour, lead and wastage,scaffolding etc. complete. And Finished Paise

with different materials,and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

ABOVE CEILING PARTITION

Providing and fixing of above ceiling partitions (AS PER DRAWINGS)

using 75 mm x 50 mm x 1 mm aluminium pipe for framing,with One Thousand Five

154 ghana wood infill etc. including all hardware item, with all material, Sq. Mt 150.00 1503.83

labour, lead,scaffolding and wastage etc. and complete the work Rupees and Eighty

satisfactorily as per instruction of architect or Engineer-in charge. Three Paise

GLASS PARTITION WITH FILMWORK

Providing and fixing of full height glass partitions (AS PER

DRAWINGS) using patch fitting / U-channels, 12mm clear toughned Four Thousand Seven

glass,film work as per drawing including all hardware Hundred Fifty Six

items,silicon,etc with all material, labour,cutouts,edge polish , lead Sq. Mt 150.00 4756.14

Rupees and Fourteen

and wastage etc. and complete the work satisfactorily as per Paise

instruction of architect or Engineer-in charge.

MIRROR FINISH(5mm thick Looking Mirror)

Providing and fitting of mirror/glass (as per drawing & approved

shade)of brand ais,modiguard,etc on ply panelling / on tile cladding Two Thousand Five

Hundred Sixty Five

156 including all material, labour and hardware, cutouts, edge Sq. Mt 90.72 2565.97

polishes,waste of materials and complete the work satisfactorily as Rupees and Ninety

per instruction of architect or Engineer-in charge. Seven Paise

WOODEN PANELLING

Providing and making of ply panelling on Wall & columns using

12mm ply, aluminium pipe for (2" x 1") framing(minimum grid size

of 600 mmx 600mm ), Ghana bidding patti (11/2" x 3/4")including One Thousand Seven

all material, labour and hardware complete,including scaffolding as Hundred Forty Eight

per instruction of architect. And Finished with different Sq. Mt 159.57 1748.14

Rupees and Fourteen

materials,polish work as per instructions,and complete the work Paise

satisfactorily as per instruction of architect or Engineer-in charge.

LAMINATE FINISH

Providing and fitting of 1 mm laminate (as per drawing & selection)

of brand greenlam,merinolam,century etc on ply partition with

mm x 20 mm teakwood beading patti design on top as per

drawing,and 3mm x 3mm grooves if shown, all material, One Thousand One

158 adhesives,polish work,labour and hardware, waste of Sq. Mt 191.49 1190.98

materials,polish work as per instructions, complete as per Rupees and Ninety

instruction of architect.[Basic Rate of Laminate : 2000rs./sheet (8' x Eight Paise

4')] and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

Supplying and Fixing of Suspended ceiling system components

which includes Single Layer Boarding with 12.5mm thick USG Boral

Standard Plasterboard This includes of USG Boral Thundersteel

Perimeter Channel (0.50mm thick having one flange of 20mm and

another flange of 30mm and a web of 28mm) screw fixed to brick

wall/partition with the help of approved screws at 600mm centers.

Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the

soffit at 1220mm centers with of USG Boral Thundersteel Ceiling

Angle (25x10mmx0.50mm thick) fixed to RCC Slab with of USG Nine Hundred Fifty

159 Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia 40mm long Sq. Mt 1824.45 958.58 Eight Rupees and Fifty

Anchor Fastener @ 600mm Centers, respectively. USG Boral Eight Paise

Thundersteel Ceiling Section (having web of 51 mm and two flanges

of 27mm each) are then fixed to the of USG Boral Thundersteel

Intermediate channel with the help of connecting clip (2.6mm Dia)

and in perpendicular direction to the USG Boral Thundersteel

intermediate channel at 457mm centers. USG Boral Thundersteel

profiles are rolled with AZ Steel (150 GSM & 310 MPa Yield

Strength) having base metal conforming to IS 513:2016 as per IS

15961:2017/ AS 1397:2001).12.5mm thick USG Boral Standard

Plasterboards (confirming to IS 2095 Part 1) is screw fixed with

25mm long Drywall screws at 230 mm centers. The screw fixing of

SOLID DOORS FOR WOODEN PARTITION(75 MM TK)

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS)

using 50 x 50 mm aluminium pipe for framing, 12mm ply (both

sides)of brand greenply ecotech mr,century sainik mr,srg etc,

including glass slit as per drawing 50 mm teak wood beading patti

at the framing etc. making of rebates and including all hardware

items,mortise door lock (ENOX EMH-SS-019)with entire set Five Thousand Two

Hundred Forty Nine

160 including cylinder,heavy duty conceal door closer of brand enox Sq. Mt 12.60 5249.88

(ENOX ITS-3870-EN 2-5),ozone,dorma,and groove (if shown) with Rupees and Eighty

all materials, labour, lead and wastage,polish work as per Eight Paise

instructions etc. complete. And Finished with different

materials,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

S.S 304 GRADE DUSTBIN

Providing & Supplying of S.S 304 GRADE . Dustbin of brand One Thousand Six

SATYAKI,pigeon etc,having size of 10 In. Diameter & 14" Height etc. Hundred Fifty Six

complete as per selection & directed by the Architect and approved Rupees and Forty

by the Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 1550/- ) Paise

Providing and fixing of POP Punning and finished by company

approved gypsum, taping, lapi, including scaffolding etc. and

including grooves as shown in drawing And including satin paint Two Hundred Seventy

complete with all material, labour with all lead, lift and Sq. Mt 724.98 273.31 Three Rupees and

transport.and complete the work satisfactorily as per instruction of Thirty One Paise

architect or Engineer-in charge.

FIX CHAIR FOR TRAINNING HALL

Providing and fixing of SHABAKHAND CHAIR of brand vista model

make amber , merryfair etc.or as per selection in leather with tilt up

frame on frontal pivot the handle top will e dicasted metal welded

precisely seat will be in complete dicasted frame and edgebending

back will be static as per model covering whole body high the

bottom portion will be connected with fastners to the floor leather

upholstery will be 1200 per metre size width 585*940 with center Fourteen Thousand

163 support of 100 mm sideways as well as back in 90 microns epoxy No. 30.00 14140.00 One Hundred Forty

powder coating,including all components,fixing,fastners,groutinng Rupees

work, material, labour,and hardwares, waste of materials etc and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge.(basic rate of chair is 13000/-)

(FONTS) : Providing and fixing of BACKLIT FONTS using 10 mm clear

Acrylic cut work and fixing 3mm acrylic on top of brand

Ptglass,astari etc,4mm Acp of 0.5 mm tk for profiling,as per

detail,3M vinyl with 5 years warranty on fading with all laser and

cnc work,including all material,osral led modules including drivers

as required, labour,all required m.s fabrication,100 mm ss studs for Twenty Thousand

mounting and other hardwares, waste of materials,scaffolding, Two Hundred Rupees

labour,lead, transport, and installation, etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.(basic height of fonts is 650-750 mm )

Providing and fixing of approved quality roller blinds using phifer

fabric of premium grade, with roller tube, bottom bar leveller

made of extruded aluminium alloy an Idler, Insert Type- Brackets,

PVC chain etc. all complete at all floor and heights as per approved

specification. Roller Tube Control, Clutch, Idler Side by side or single

Roller Tube of extruded Aluminium 38mm inner dia - 41mm outer

dia minimum wall thickness of 1.6mm.

Roller blind - roller blind fabric should be made up of 35%

FibreGlass, 65% PVC, it should have specific low emissivity

treatment and lead free with Greenguard gold certification. It Two Thousand Five

165 should have 3% to 5% openness, fabric thickness should be 0.43 Sq. Mt 379.14 2507.05 Hundred Seven

mm, mesh weight approx 400 gms/ sqmtr. It should cut UV rays, Rupees and Five Paise

with antimicrobial properties preferably with Microban. The fabirc

should be Flame retardant and Lead Free. It should be GreenGuard

certified with Gold Standard for low chemical emissions for indoor

use. (Basic rate of Roller blinds- 85 rs/sq.ft.)including all

accessories, material, labour,installation etc..and complete the

work satisfactorily as per instruction of architect or Engineer-in

STORAGE UNIT WITH LAMINATE FINISH

Providing and Making of Storages (AS PER DRAWINGS) using ply of

brand of brand greenply ecotech mr,century sainik mr,srg

etc,(thickness as specified)/ sag wood and finished by 1 mm

Laminate outside as per selection of brand

greenlam,merinolam,formica or 6mm HDF as per drawing, 1mm tk

laminate (inside),water pu polish (as shown), drawers, shelves etc. Twelve Thousand Six

Hundred Eighty Two

166 with all hardware, nylon leveler foot rubber, handles,hinges, locks , Sq. Mt 218.04 12682.38

magnet and other acessories with all material, installation,labour, Rupees and Thirty

lead and wastage,polish work as per instructions etc. and complete Eight Paise

the work satisfactorily as per instruction of architect or Engineer-in

charge.(Basic rate of Inside Laminate : 18 rs./sq.ft. & Outside

Laminate : 53 rs./sq.ft.)

GANG CHAIR - 3 SEATER

Providing and fixing 3-seater gang sitter with moulded foam, with

Aluminium casting and metal waterfall seats, PU 10mm thick pads

on seat & back (chargeable), P.C. frame & with perforation. as per

Sixteen Thousand Six

architects selection,and complete the work satisfactorily as per

167 No. 18.00 16665.00 Hundred Sixty Five

instruction of architect or Engineer-in charge.BRANDS : COHUMAN

, FEATERLITE , HAYWORTH(BASIC RATE OF GANG CHAIR 14000)

CENTER TABLE (0.60 X 0.60)

Providing and fixing corner table of brand as per architects

Nine Thousand Ninety

168 selection,and complete the work satisfactorily as per instruction of No. 21.00 9090.00

architect or Engineer-in charge.(basic rate per piece is 7000/-) Rupees

COFFEE TABLE ( 1.20 X 0.60 X 0.45 )

Providing and fixing Coffee table of brand as per architects

Fifteen Thousand One

169 selection,and complete the work satisfactorily as per instruction of No. 3.00 15150.00

architect or Engineer-in charge.(basic rate per piece is 15000/-) Hundred Fifty Rupees

SINGLE BAY TABLE WITH OUT MODESTY PANNEL (1.20 mt x

Providing and fixing of single bay office table of size 1.20 x 0.60 mt

and side storage with drawers and shutters of width 0.45 mt as per

drawings,modesty pannel and instructions provided,using ply of

brand greenply ecotech mr,century sainik mr,srg etc,or aluminium

pipe for framing and finishing it with 1 mm unicore laminate and

1mm laminate of brand greenlam or selected by the architect(basic

rate of unicore laminate is 3000 per sheet and other 1mm laminate Thirty Three

170 is 2000 per sheet, of size 8'0 x 4'0)including all material, No. 69.00 33330.00

installation,m.s fabrication work with powder coating,labour and Hundred Thirty

hardware,drawer channels,hinges,handles,keyboard trolley,cpu Rupees

trolley,cable manager,cable trunking system etc waste of

materials,polish work as per instructions etc and complete the

work satisfactorily as per instruction of architect or Engineer-in

charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

"L" TYPE TABLE FOR STAFF (1.80 mt X 0.60 mt )

Providing and fixing of L-TYPE office table of size 1.80 x 0.60 mt and

side storage with drawers and shutters of width 0.60 mt as per

drawings,modesty pannel, and instructions provided,using ply of

brand greenply ecotech mr,century sainik mr,srg etc,or aluminium

pipe for framing and finishing it with 1 mm unicore laminate and

1mm laminate of brand greenlam or selected by the architect(basic

rate of unicore laminate is 3000 per sheet and other 1mm laminate

is 2000 per sheet, of size 8'0 x 4'0)including all material, installation, Forty Five Thousand

171 m.s fabrication work with powder coating with powder No. 24.00 45450.00 Four Hundred Fifty

coating,labour and hardware,drawer channels, nylon leveler foot Rupees

rubber,hinges,handles,keyboard trolley,cpu trolley,cable

manager,cable trunking system etc,, waste of materials,polish work

as per instructions etc and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.BRANDS

:,UNIMAPLE,FEATHERLITE,COHUMAN.

HIGH BACK CHAIR-TYPE A (ALL CABIN & MEETING HALL)

Providing and fixing of high back office chair, with bifma class IV gas

lift. Zen HB Chair, G.F. Nylon structure with wire mesh on back high

density cushion on seat adjustable arms with PU pads synchro tilt

with multi locking mechanism and seat slider gaslift for height

Ten Thousand One

172 adjustment prong aluminium base with 60 mm castors. as per No. 75.00 10100.00

selection and complete the work satisfactorily as per instruction of Hundred Rupees

architect or Engineer-in charge.Basic rate of chair is 7790/- per

chair. BRANDS : Zen,COHUMAN, BRISTOL, COMO.

MID BACK CHAIR-TYPE D( ALL VISITOR , STAFF & MEETING HALL )

Providing and fixing of mid back office chair of good quality Curved

fiber and nylon body with adjustable lumber support, Reinforced

mesh & knee tilting mechanism, 4 way adjustable arms, 5 prong

nylon base as per selection and complete the work satisfactorily as Four Thousand Forty

per instruction of architect or Engineer-in charge.Basic rate of chair No. 198.00 4040.00

is 2975/- per chair BRANDS : BRISTOL, COHUMAN STORM FIX

Providing and fixing of storage rack of angle slotted type of size

2000 x 36”900 x 18” 460 with 6 shelfs(20 swg) ,including all Four Thousand Five

174 NO. 30.00 4545.00 Hundred Forty Five

hardware,colours,powder coating, channels, etc.and complete the

work satisfactorily as per instruction of architect or Engineer-in Rupees

Providing and fixing HPL LOCKERS with locking system of brand

merinolam, Size of Column : 380mm (W) X 450mm

(D) X 1800mm (H) with 100mm Base

Size of Locker : 380mm (W) X 450mm (D)X 300mm (H)

Accessories: Standard – Merino Make Aluminum, Stainless Steel -

304 Grade accessories) as per drawing, HPL as per is 2046 & en-438

manufactured under high pressure >5 mpa & temperature >120 cc

with bunch of craft paper impregnated with thermo setting

phenolic resin & decorative paper mades of alpha cellulose fiber

Four Thousand Five

impregnated with thermo setting malamine resin which provide

175 NO. 45.00 4545.00 Hundred Forty Five

superior scratch,abrasing heat,chemical,impact,graffiti & moisture

resistance along with anti bacterial properties. With hardware &

accessories from besco , all screws,hinges, coat hook And anti noise

rubber pads including all material, labour and hardware, waste of

materials and complete the work satisfactorily as per instruction of

architect or Engineer-in charge. (basic rate of one locker is 3500)

Providing and supplying stool chairs of stainless steel with height

adjustable seating option for doctors and patients Two Thousand Two

176 per selection and complete the work satisfactorily as per No. 45.00 2222.00 Hundred Twenty Two

instruction of architect or Engineer-in charge.Basic rate of chair is Rupees

2000/- per chair

PAINTING - 24"X24"

Providing and fixing of painting as per selection and complete the

Twenty Two Rupees

177 work satisfactorily as per instruction of architect or Engineer-in No. 18.00 3022.93

and Ninety Three

charge.Basic rate of chair is 3000/- per painting

PAINTING - 36"X36"

Five Thousand Three

Providing and fixing of painting as per selection and complete the

Hundred Eighty Three

178 work satisfactorily as per instruction of architect or Engineer-in No. 9.00 5383.30

Rupees and Thirty

charge.Basic rate of chair is 4500/- per painting

Providing and fixing of 12 to 16 inch dia wallclocks of brand quartz One Thousand Two

or as per selection and complete the work satisfactorily as per Hundred Sixty Two

instruction of architect or Engineer-in charge.(basic rate of wall Rupees and Fifty

clock including gst is rs 750/-per piece) Paise

OUTDOOR FLOOR MAT

Providing and fixing outdoor floor matt of brand comforts or as per Three Thousand Five

180 selection and complete the work satisfactorily as per instruction of No. 9.00 3535.00 Hundred Thirty Five

architect or Engineer-in charge.(basic size of matt is 1.80 x 1.20 mt) Rupees

INDOOR FLOOR MAT

One Thousand Two

Providing and fixing indoor floor matt of brand my floor or as per

Hundred Sixty Two

181 selection and complete the work satisfactorily as per instruction of No. 27.00 1262.50

Rupees and Fifty

architect or Engineer-in charge.(basic size of matt is 1.20 x 0.60 mt)

Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C.

Dustbin of brand cello,pigeon etc. complete as per selection & One Thousand Ten

directed by the Architect and approved by the Engineer in Rupees

Charge.(BASIC RATE OF DUSTBIN IS RS 850/- )

Providing & fixing of HANGING LIGHT with box type aluminium

housing ,frosted acrylic at bottom, end caps,hanging strings etc as

per selection with 40 watt Tranquil led strips & driver suggested &

Six Thousand Sixty

183 as directed by EIC/Consultant.and complete the work satisfactorily NOS 27.00 6060.00

as per instruction of architect or Engineer-in charge.( MODEL NO - Rupees

RL024 OF BRAND RANGE LITE OR EQUIVALENT)

DECORATIVE WALL LIGHT

Providing & fixing of DECORATIVE WALL LIGHT as per selection with

lamp & driver suggested & as directed by EIC/Consultant.and Three Thousand

184 complete the work satisfactorily as per instruction of architect or NOS 27.00 3726.90

Engineer-in charge.( MODEL NO : RL2012 SQ OF BRAND RANGE Twenty Six Rupees

LITE OR EQUIVALENT) and Ninety Paise

S.S NAME PLATE SMALL

Providing and fixing of 2MM TK S.S 316 GRADE matt finish NAME

PLATE with cut work and fixing 3mm acrylic on top or behind of

brand Ptglass,astari etc,with all laser and cnc work,and wooden

finish back board ,including all material,SCAFFOLDING labour,15 One Thousand Five

mm ss studs for mounting and other hardwares, waste of materials NOS 42.00 1515.00 Hundred Fifteen

etc and complete the work satisfactorily as per instruction of Rupees

architect or Engineer-in charge.( BASIC SIZE OF NAME PLATE

Providing and fixing of soft board of size 1 x 1.8 Quartet White

Frame Cork Board, Bulletin Display Board, Pin Board, Lightweight

Board for offices with backing of wood with complete installation Two Thousand Four

and mounting with other hardwares, waste of materials etc and SQMT 66.00 2424.00 Hundred Twenty Four

complete the work satisfactorily as per instruction of architect or Rupees

Engineer-in charge.

DOUBLE DOOR SIZE (APRROX SIZE OF 2.17X2.45) WITH FIXED

GLASS TOP (APRROX SIZE OF 2.17 X 0.75 to 1.05)

Providing and fixing of 12 mm tk toughned GLASS DOORS using

Dorma BTS 75 V Glass Door PKG EN 1-4 (Top Patch-1, Bottom patch-

1, Floor Spring-1, Corner Lock-1); Dorma Xl-C 4003 A Patch fitting

for overpanel and sidelight; Dorma Xl-C 4004 A Connector for

overpanel and Sidelight; Dorma Xl-C 4006 Central Connector; Eighty Four Thousand

Dorma Xl-C 4008 Side Connector; Dorma Xl-C 3000 H Type Handle NO 3.00 84083.47 Eighty Three Rupees

400x22 CTC 300 AND AS PER DRAWING including all and Forty Seven Paise

acceessories,locks, material, silicone,labour,installation, Hole &

slote charges etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

INFORMATION DESK - ENTRANCE LOBBY

Providing and fixing of INFORMATION DESK as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik mr,srg etc,aluminium pipe for framing and

finishing it with 6 MM CORIAN of brand granium,Tranquil,dupont

and 1 mm unicore laminate of brand greenlam or selected by the One Lac Three

Thousand Eighty Five

188 architect(basic rate of unicore laminate is 3000 per sheet of size 8'0 No. 3.00 103085.36

x 4'0)including all material,ms fabrication work ,glass work, Rupees and Thirty Six

installation, labour and hardware, polish work as per Paise

instructions,waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

CONFERENCE ROOM TABLE

Providing and fixing of CONFERENCE ROOM table including side

storage as per drawings and instructions provided, using ply of

brand greenply ecotech mr, century sainik mr, srg etc., aluminium

pipe for framing and finishing it with 12 or 6 MM CORIAN work

including all cnc work of brand granium,Tranquil,dupont ,and 1mm

unicore laminate and 1mm laminate of brand greenlam or selected Four Lac Thirty Eight

by the architect (basic rate of unicore laminate is 3000 per sheet Thousand Six

189 and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0) No. 3.00 438639.23 Hundred Thirty Nine

including all material, installation,m.s fabrication work with powder Rupees and Twenty

coating, glass work as per design,labour and hardware, waste of Three Paise

materials,polish work as per instructions etc. and complete the

work satisfactorily as per instruction of Architect or Engineer-in

charge. (APPROX RUNNING LENGTH OF TABLE IS UP TO 22 MT.)

SOFA - 2-SEATER (AUDI)

Providing and fixing 2-seater sofa,as per drawings or selection using

base WHITE ASH WOOD for framing with molded foam,and high

density fom warwick brand rexine(as per architects selection) in

sofa upholstery and ss204 grade corner legs with 5 years warranty Twenty Five

and instructions provided, and ,and complete the work No. 21.00 25250.00 Thousand Two

satisfactorily as per instruction of architect or Engineer-in Hundred Fifty Rupees

charge.(appox lenght of sofa is 4'6'') BASIC RATE 4500/RN FT.

BRANDS : SHEARLING , SEDUS , NATUZZI

SOFA - 3-SEATER(AUDI)

Providing and fixing 3-seater sofa,as per drawings or selection using

base WHITE ASH WOOD for framing with molded foam,and high

density fom warwick brand rexine(as per architects selection) in

sofa upholstery and ss204 grade corner legs with 5 years warranty Thirty Thousand

and instructions provided, and ,and complete the work No. 54.00 30300.00 Three Hundred

satisfactorily as per instruction of architect or Engineer-in Rupees

charge..(appox lenght of sofa is 6'6'') BASIC RATE 4500/RN

FT.BRANDS : SHEARLING , SEDUS , NATUZZI

SOFA - 1-SEATER(BANLAN)

Providing and fixing 1-seater sofa,as per drawings or selection using

base WHITE ASH WOOD for framing with molded foam,and high

density fom warwick brand rexine(as per architects selection) in

sofa upholstery and ss204 grade corner legs with 5 years warranty

192 and instructions provided, and ,and complete the work No. 30.00 27775.00

Hundred Seventy Five

satisfactorily as per instruction of architect or Engineer-in

charge.(appox lenght of sofa is 3'6'') BASIC RATE 7500/RN FT.

BUNK BED (SIZE:78''X36''X65'')

Providing & fixing M.S.Bunk bed Double Deck steel beds for hostels

& barrack. Manufactured from prime quality ERW tabular frame &

CRCA sheet. Overall size : H-1670x L-2000 x D-900mm ,the main

frame to be fabricated using 50 x50 x 4 mm ms hollow section at

four corners,50 x 25 x 3 mm ms framing on peripheral sides on top Twelve Thousand

193 and bottom with 25 x 25 x 1.5 mm framing to be used for No. 24.00 12061.30 Sixty One Rupees and

supporting 12mm ply at bottom and 25 x25 x 1.5 mm ms to be used Thirty Paise

for ladder and other framing As per attached drawing and Capacity

of 2 persons &and completing the work satisfactorily as per

architect or engineer incharge.

SINGLE BED MATTRESS (SIZE:78''X36''X4'')

Providing & Fixing of Single bed Cotton Mattress of size 78" x 36" x Two Thousand Two

194 4" with pillow , as per directed by Architect/Engineer-in charge. No. 48.00 2222.00 Hundred Twenty Two

SINGLE BED BLANKET

Providing & Fixing of Single bed Blanket as per directed by Five Hundred Seventy

195 Architect/Engineer-in charge. No. 48.00 575.70 Five Rupees and

PLANTER WITH REAL PLANTS

Providing and fixing 13 inch dia planter/pots of frp or plastic

including drain tray with real indoor plants as per Two Thousand Five

196 selection,including 3 feet ht plants of brand seasonal dekor or as No. 30.00 2525.00 Hundred Twenty Five

per selection and complete the work satisfactorily as per Rupees

instruction of architect or Engineer-in charge.(BASIC RATE OF POT

Providing and fixing of core cutting upto 50 to 150 mm dia core in

rcc members(beams) or walls for concealing A/C piping or electric

conduting ,carried out using cutter machine.Fillinging of zari up to

Six Hundred Thirty

first coat of plastering,finishing with colour/ putty work ,with all

197 NOS 90.00 631.25 One Rupees and

material, labour, lead,scaffolding and wastage etc and complete

Twenty Five Paise

the work satisfactorily as per instruction of architect or Engineer-in

HD PHOTO & VIDEOGRAPHY & DRONE SHOOT & COFFEE TABLE

Providing & Presenting professional HD photography, videography

& drone shooting for pre-construction, during construction and

Post-construction work and also providing & presenting Technical Fifty Five Thousand

198 details, drawings & Detail of benefits of the project to NOS 3.00 55550.00 Five Hundred Fifty

people/environment in the described picture form with a small reel Rupees

of the entire project.and Preparing Coffee table book of mimimum

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

Four Hundred Forty

textured/metallic/white front plate modules erected on / in wall /

199 Pt. 185.00 449.36 Nine Rupees and

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

Thirty Six Paise

/ H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth continuity

and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered with 3 mm thick One Hundred Forty

200 PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with Pt. 282.00 149.79 Nine Rupees and

necessary Lamp holder / ceiling rose / H.D.Connector as directed. Seventy Nine Paise

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. lll

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with Six Hundred Twenty

textured/metallic/white front plate modules erected on / in wall / Pt. 63.00 629.11 Nine Rupees and

ceiling as per pipe erected. with necessary ceiling rose / Eleven Paise

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of Fifty Eight Rupees and

green colour for earth continuity of following size (A) With medium Mtr 760.00 58.21

Twenty One Paise

class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of Seventy Seven

green colour for earth continuity of following size (A) With medium Mtr 11420.00 77.03 Rupees and Three

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front Five Hundred Fifty

204 plate modules erected on / in wall / ceiling as per pipe erected. Pt. 15.00 558.92 Eight Rupees and

with necessary batten/angle holder or ceiling rose or Ninety Two Paise

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate Four Hundred

front plate modules erected on / in wall / ceiling as per pipe Seventy Three Rupees

erected with following type of accessories.[I] For 6A Plug and 6 a Pt. 49.00 473.33

and Thirty Three

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb Paise

db board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe Six Hundred Ninety

206 erected with following type of accessories.[II] For 16A Plug and 16 Pt. 113.00 697.59 Seven Rupees and

amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with Fifty Nine Paise

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

207 Pt. 27.00 817.41 Seventeen Rupees

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with

and Forty One Paise

2.5 sq.mm ( green) earthing wire from mcb d b board.(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured /metallic/white front Two Hundred Forty

208 Pt. 75.00 240.52 Rupees and Fifty Two

plate modules erected on / in wall / ceiling with following type

accessories Cat. III Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Twenty Two Rupees

209 solution & Clamps with following dia of pipes, in approved manner Mtr 1690.00 22.25

and Twenty Five Paise

as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Thirty Rupees and

solution & Clamps with following dia of pipes, in approved manner Mtr 1420.00 30.82

Eighty Two Paise

as directed.(b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Fifty One Rupees and

211 solution & Clamps with following dia of pipes, in approved manner Mtr 60.00 51.36

Thirty Six Paise

as directed.(c) 32 mm

Providing and fixing approved make Perforated C type cable tray.

Made from pre- galvanized sheet steel. The cable tray should be

bended as per IS 2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt and Four Hundred

212 washers etc. erected on existing support as per Specification and as Mtr 30.00 470.76 Seventy Rupees and

per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Thick Seventy Six Paise

(3) 150 X 50 X 1.5 mm Thick

213 Mtr 30.00 320.98 Twenty Rupees and

Ninety Eight Paise

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules One Hundred Fifty

214 erected with necessary connections as per site situation directed by Ea. 57.00 152.36 Two Rupees and

Engineer In charge.(3)Two pin RJ-11 Telephone socket with top [A] Thirty Six Paise

For One Gang Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules One Hundred Fifty

215 erected with necessary connections as per site situation directed by Ea. 51.00 152.36 Two Rupees and

Engineer In charge(8) Computer RJ-45 socket Cat. III Thirty Six Paise

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front One Thousand Eighty

216 plate,modules erected with necessary connections as directed. 1 Ea. 51.00 1080.18 Rupees and Eighteen

no. 6A/16A universal plug-switch combined.3 nos. 6A Switch 3 nos. Paise

6A 5 pin Plug .For Modular Type Accessories Cat.III

Supplying & erecting approved make LAN cable of following size in

Forty Three Rupees

217 existing pipe as per direction[C] CAT - 6 Mtr 3660.00 43.65

and Sixty Five Paise

SITC of 24 x 10/100/1000BASE-T ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features Fifteen Thousand

L2+ Static Routing Three Hundred

Optional “standard mode” or “surveillance mode” management Ea. 3.00 15398.22 Ninety Eight Rupees

user interface [Approved by Competent and Twenty Two

Authority i.e. not Below the rank of Executive Engineer ] Paise

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports

Advanced L2 switching and security features

L2+ Static Routing Eighteen Thousand

219 Optional “standard mode” or “surveillance mode” management Ea. 3.00 18398.26

user interface Ninety Eight Rupees

65W PoE budget and Twenty Six Paise

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT erected Seventeen Rupees

in existing pipe. of following size of conductors & nos.of pairs. With Mtr 2520.00 17.97 and Ninety Seven

necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured Paise

SITC of Digital / PCM / TDM EPABX System having SMT design,

system with flexible universal slots. Inbuilt Auto attendant facility,

Minimum 15 Nos. conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through Analog telephone

digital key from Ethernet, public address cord, shall have

unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of

Service, Quick Dial-Single Digit dialing of any two external number,

Once only ring device, Chairman / Secretary - Do not disturb

Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Fifty One Thousand

Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Four Hundred Thirty

221 Call transfer while Ringing with Voice Guide System, (DISA), Caller Ea. 3.00 51439.81

Nine Rupees and

ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Eighty One Paise

Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID

Direct Inverse Dialing, External Music Input, Fax Homing, Global

Directory Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer

][B] No of Extension 24, No of Junctions 9, 8 Port IP Resource in-

built, 4 Port Web base Video Conferencing, No of expandable ports

: 96, Operators Console - 01 Compatible : ISDN

Providing and erecting IP Phone with display with all IP system Five Thousand Six

supported [[Approved by Competent Authority i.e. not Below the Hundred Forty Nine

rank of Executive Engineer ] Rupees and Fifteen

Supplying & erecting push button type telephone instrument

having speaker phone Caller ID & hands free dialing system & 30 Five Hundred Sixty

223 memories with display system Single line [[Approved by Ea. 54.00 564.92 Four Rupees and

Competent Authority i.e. not Below the rank of Executive Engineer ] Ninety Two Paise

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED Three Hundred

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Seventy Two Rupees

224 Certificates)(NOTE: Below description have shown ranges of Ea. 58.00 372.33

and Thirty Three

Wattage capacity of LED fittings.The Engineer incharge may select Paise

any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting Four Hundred Twenty

225 required LM-79 & LM-80 Certificates)(NOTE: Below description Ea. 52.00 427.11 Seven Rupees and

have shown ranges of Wattage capacity of LED fittings.The Eleven Paise

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting Five Hundred Eighty

226 required LM-79 & LM-80 Certificates)(NOTE: Below description Ea. 3.00 588.88 Eight Rupees and

have shown ranges of Wattage capacity of LED fittings.The Eighty Eight Paise

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting Seven Hundred Fifty

227 required LM-79 & LM-80 Certificates)(NOTE: Below description Ea. 3.00 758.36 Eight Rupees and

have shown ranges of Wattage capacity of LED fittings.The Thirty Six Paise

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 22-24 watts, Surge-2 KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting One Thousand Seven

Hundred Ninety Four

228 required LM-79 & LM-80 Certificates)(NOTE: Below description Ea. 3.00 1794.03

have shown ranges of Wattage capacity of LED fittings.The Rupees and Three

Engineer incharge may select any wattage capacity between the Paise

ranges shown.)(B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing complete.IP20 (vi)

watts, 24" x 24", Surge- 2KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Two Thousand One

229 efficiency > 85 % ( fitting required LM-79 & LM-80 Ea. 3.00 2160.37

Certificates)(NOTE: Below description have shown ranges of Rupees and Thirty

Wattage capacity of LED fittings.The Engineer incharge may select Seven Paise

any wattage capacity between the ranges shown.) (I) Adjustable

spot light with COB led having aluminium reflector of following

wattage (iv) 30 Watts Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver One Thousand Ninety

230 efficiency > 85 % ( fitting required LM-79 & LM-80 Ea. 386.00 1097.31 Seven Rupees and

Certificates)(NOTE: Below description have shown ranges of Thirty One Paise

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (I) Adjustable

spot light with COB led having aluminium reflector of following

wattage (iii) 15 Watts Cat-III

Supplying Installation, Testing and Commissioning of LED

RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for exterior use

having IP68 rating (as per site requirement). Flexible light strip of

mtr standard length with 12-15 Watt per meter. Luminaire shall be

capable of producing dynamic colour changing light for with

million colours by DMX/Ethernet based control. Minimum System

lumens 450 lumens/meter and System Lumen Efficacy > 30lm/w.

Luminaire light beam spread - 100-110°, The Strip should have IP

protection and is offered IP 68 rated connectors to join the LED

Strips in continuity. The luminaire must be offered with Aluminium Eight Thousand Two

channel for mounting the strip lights. The product should be Hundred Ninety

231 complete with all accessories and Driver. Lifetime of complete Ea. 45.00 8293.13

Three Rupees and

luminaire (LED, Driver, Electrical & control circuitry)shall be at least Thirteen Paise

70:50000 burning hours at 50°C. Luminaire shall be conforming to

BIS (IS 10322) with dully R Number marked. Luminaire shall be

complete with replaceable driver and capable of operating at line

voltage without any separate power supply from 24 V DC, Fixture

shall be suitable to operate at an ambient temperature range of -

10°C to +50°C. The successful bidder shall submit the following

certifications /reports for approval before supply of materials:

product data sheets, LM79. report from NABL accredited lab,

illuminance diagram, polar curve & LM80 report issued by LED

manufacturer & RoHS Compliance along with CE certificate.

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C. One Thousand Nine

50 Hz 1200 mm sweep complete having 3blades with aluminium Hundred Forty Seven

blades with , canopy & 30 cm. down rod erected with Rupees and Twenty

earthing.(Make shall be approved by Engineer in charge)) Five Paise

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced One Hundred Six

233 through a 16 Gauge M.S. box / Heavy Duty PVC box complete Ea. 63.00 106.99 Rupees and Ninety

erected concealed in Ceiling with necessary finishing. Nine Paise

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

One Hundred Six

M.S. Pipe down rod erected duly painted for fan complete with

234 Mtr. 63.00 106.99 Rupees and Ninety

proper insulation without leakage and earthing.

Supplying & erecting approved make low noise decorative exhaust One Thousand Three

fan having square frame ABS body with inbuilt lowers & square Hundred Sixty Six

235 frame.250mm with 1350 RPM Cat.II Ea. 45.00 1366.07

Rupees and Seven

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed Forty Six Thousand Six

compressor, fan motor, condensing unit, water tank surrounded by Hundred Forty Eight

evaporating, coil, thermostats, relay etc.complete with necessary Ea. 9.00 46648.31

Rupees and Thirty

inlet & outlet connection. The body of water cooler will be made One Paise

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter Twenty Four

suitable buster DC pump capacity 80 psi, mention with 40 psi inline Thousand Three

237 type post carbon filter auto low & high pressure switches with Ea. 9.00 24394.07 Hundred Ninety Four

following size of storage tank & LPH capacity & erected as directed Rupees and Seven

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump Paise

SITC of 3LCD Lamp based projector having wxga (1280x800) or

better resolution with minimum white brightness of 3800 lumens

and color brightness of 3800 lumens. The projector should have

minimum 1HDMI,1VGA input. Having contrast ratio of 15000:1 or

more. the projector should have auto vertical key stone correction

of +/- 30 degree and Manual Horizontal of +/-30 degree. the Thirty Three

projector should have optical lens, throw ratio 1.30-1.56:1. Zoom Thousand Eight

238 Factor of 1.2. Lens focus Manual having focal length 16.9mm to Ea. 3.00 33894.91 Hundred Ninety Four

20.28mm. projector should have features like AV mute slide, quick Rupees and Ninety

corner and split function and should support wireless functionality One Paise

with inbuilt wifi or wifi dongle. [Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

Supply, Installation Testing & Commissioning 15 Mtr. HDMI

Interface Cable as per the detailed Specifications supports One Thousand Seven

transmission of 4K Signals as per the detailed Specifications Hundred Seventy

Seven Rupees and

Seventy Seven Paise

SITC of universal Projector mounting kit, with necessary grouting,

Six Thousand Eight

fasteners etc. with adjustable height and suitable for all types of

Hundred Forty Seven

240 projectors. [Approved by Competent Authority i.e. not Below the Ea. 3.00 6847.46

Rupees and Forty Six

rank of Executive Engineer ]

SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Three Thousand

Screen, Aspect Ratio-4:3 [Approved by Competent Authority i.e. Three Hundred

241 not Below the rank of Executive Engineer ] Ea. 3.00 3378.37 Seventy Eight Rupees

and Thirty Seven

Supplying, installing, testing & commissioning of digital pure sine

wave INVERTOR of approved make single phase 230v complete Twenty Two

with overload relay & necessary protection with following size of Thousand Two

242 batteries, erected with battery terminal wire, copper lead wire to Ea. 3.00 22254.24 Hundred Fifty Four

be connected to load with 10 Amp., 10 kA MCB.[F] 2000 VA with Rupees and Twenty

battery 12V x 2, 150 AH load up to 1250 W Four Paise

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor Sixty Nine Thousand

with battery, over/under voltage output with over load & short Three Hundred Thirty

circuit protection equipment. The system housed in CRC sheet duly Ea. 3.00 69330.51

Rupees and Fifty One

powder coated paint with following power backup.with MS painted Paise

batteries stand, 10% Overload capacity for momentary load. (C)

KVA with 1Hr Backup

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type Eleven Thousand Two

LED Meter :5 LED Arrays Hundred Ninety Eight

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) Ea 9.00 11298.30

Rupees and Thirty

with automatic changeover from AC to Battery operation, duly Paise

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Gooseneck microphone

Unidirectional condenser microphone

Phantom powered by amplifier Twelve Thousand

245 On/off sliding switch with priority contact Ea. 6.00 12045.53 Forty Five Rupees and

Supplied with fixed 2 m (78 in) cable and lockable DIN connector Fifty Three Paise

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Providing and erecting cordless microphone with UHF Diversity

handheld wireless microphone/caller wireless complete with

receiver and transmitter unit,Cardiod ,polar pattern,dynamic

microphone,LCD display for battery and frequency status and

information ,32 preset channels,with compatible groups of 8 Five Thousand One

channels,14 hrs.battery life,frequency response 80Hz to 18KHz.,RF Hundred Thirty Five

sensitivity <1.0 Uv,image rejection > 55 dB,dynamic range >95 dB Ea. 6.00 5135.60

Rupees and Sixty

and receiver having 32 channels,S/N ratio>100 dBA,Dynamic Paise

range>95 dB,distortion<1% [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

SITC of Ceiling loudspeaker 20W, metal

[Approved by Competent Authority i.e. not Below the rank of

247 Ea 75.00 2072.21 Seventy Two Rupees

Executive Engineer ]

and Twenty One Paise

providing and erecting Miniature circuit breaker single pole 0.5A to

Two Hundred Sixty

2A system and having breaking capacity 10 KA to be erected in

248 Ea. 87.00 269.62 Nine Rupees and Sixty

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking One Hundred Eleven

249 capacity 10 KA to be erected in existing box. confirming to IS Ea. 414.00 111.27 Rupees and Twenty

8828/1996 with ISI Mark Cat.III Seven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Seven Hundred Thirty

Load (C Curve) having 10KA breaking capacity & confirms to IS

250 Ea. 27.00 736.10 Six Rupees and Ten

:8828 in existing box having following capacity (c)63 Amp Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Six Hundred Sixty

Load (C Curve) having 10KA breaking capacity & confirms to IS

251 Ea. 24.00 667.63 Seven Rupees and

:8828 in existing box having following capacity (b)40 Amp. Cat.III

Sixty Three Paise

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

Six Hundred Thirty

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

252 Ea. 6.00 637.67 Seven Rupees and

existing box having following capacity (b)40 Amp. Cat.III

Sixty Seven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Five Hundred Ninety

Load (C Curve) having 10KA breaking capacity & confirms to IS

253 Ea. 12.00 594.87 Four Rupees and

:8828 in existing box having following capacity (a) 6 to 32 Amp.

Eighty Seven Paise

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

Five Hundred Ninety

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

254 Ea. 6.00 594.87 Four Rupees and

existing box having following capacity (a) 6 to 32 Amp. Cat.lll

Eighty Seven Paise

Providing & erecting 240 V MCB double pole switch for lighting

Two Hundred Seventy

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

255 Ea. 6.00 278.17 Eight Rupees and

8828 in existing box having following capacity(A) 6 to 32 Amp. .

Seventeen Paise

Providing & erecting 240 V MCB double pole switch for motor &

Two Hundred Ninety

inductive load (C Curve) having 10 KA breaking capacity &

256 Ea. 12.00 299.58 Nine Rupees and Fifty

confirms to IS : 8828 in existing box having following capacity (A)

to 32 Amp. Cat. lll

Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all Three Thousand

advance feature & do not incorporate any electronic component Ea. 3.00 3038.55 Thirty Eight Rupees

for following Max. rating erected as directed.(iii) 63 Amps. FP and Fifty Five Paise

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 Two Thousand Six

V,50Hz. having characteristic of quick action & tripping with all Hundred Fifty Three

advance feature & do not incorporate any electronic component. Ea. 18.00 2653.39

Rupees and Thirty

for following Max. rating erected as directed (iii) 63 Amps. DP Nine Paise

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 Two Thousand Two

V,50Hz. having characteristic of quick action & tripping with all Hundred Thirty Three

advance feature & do not incorporate any electronic component. Ea. 36.00 2233.98

Rupees and Ninety

for following Max. rating erected as directed (ii) 40Amps. DP Cat. Eight Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should Two Thousand Three

Hundred Thirty Eight

260 be used of same company of MCB to be used) suitable for (B) three Ea 9.00 2338.41

phase incoming and single phase horizontal type outgoing Per Rupees and Forty One

phase isolation type (PPI) (b) sheet steel double door (i)4 way Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should Three Thousand Four

261 be used of same company of MCB to be used) suitable for (B) three Ea 6.00 3411.75

phase incoming and single phase horizontal type outgoing Per Rupees and Seventy

phase isolation type (PPI) (b) sheet steel double door (iii)8 way Five Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should Three Thousand Eight

Hundred Seventy

262 be used of same company of MCB to be used) suitable for (B) three Ea 3.00 3873.10

phase incoming and single phase horizontal type outgoing Per Three Rupees and Ten

phase isolation type (PPI) (b) sheet steel double door (iv)12 way Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should Six Hundred Twenty

be used of same company of MCB to be used) suitable for (A) single Ea 6.00 628.25 Eight Rupees and

phase incoming and horizontal single phase outgoing (b) sheet steel Twenty Five Paise

double door (IP-43) (i)4 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link,

earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP- Thirteen Thousand

264 54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and Ea 3.00 13823.31

three phase outgoing as per following .(The DBs should be used of Twenty Three Rupees

same company of MCB to be used) (C)8 way outgoing and Thirty One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 One Thousand Four

without MCB to house appropriate nos. of MCBs.(The DBs should Hundred Ninety One

be used of same company of MCB to be used) suitable for (A) single Ea 15.00 1491.03

Rupees and Three

phase incoming and horizontal single phase outgoing (b) sheet steel Paise

double door (IP-43) (iv)12 way

Supplying & erecting approved make RCCB + MCB (Electro

magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity &

mili sec. tripping time conforming to IS 12640 test knob facility trip One Thousand Eight

Hundred Fourteen

266 free mechanism operating for rated leakage at nominal ten volt, Ea 53.00 1814.58

complete erected including all materials lugs screws etc. Rupees and Fifty Eight

completed. [a] 6A / 10A / 16A / 20A / 25A 2 pole single phase Cat. II Paise

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary

IP42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copperaluminium strips, rubber Fourteen Thousand

grommets, rib, bakelite control fuses/MCB for measuring Nine Hundred One

267 instruments, earth bus & earth bolts, foundation flange - boltsbase Sq Mtr 36.00 14901.78

Rupees and Seventy

Plates, sufficient nos. of hinged doors, handles with locking Eight Paise

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder

coating.(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base beams) The panel

shall be supplied with following approved manufacturers with

followingsize(B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory (i) with 350mm

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

268 partitions with necessary accesories , supporting angles/ flats 0.00 0.00 0.00 No Rupees

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating (The rates excludes the Twenty One

cost of switchgears, bus bars, inter connecting mains & Copper Thousand Two

0 Aluminium strips, meters, Fuses etc. The dimension shall be Sq Mtr 6.00 21257.08 Hundred Fifty Seven

measured excluding base beams) The panel shall be supplied with Rupees and Eight

following approved manufacturers with following size.. (B) The Paise

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (ii) with 550 mm. Depth

Supplying & erecting approved make Four Pole 415V Motorised

Automatic transfer switch including controller with UV/OV, phase Seventy One

sequence, single phasing and frequency protection interior for Thousand Eight

269 Ea. 3.00 71821.27 Hundred Twenty One

panel mounting with operating mechanism A.C.23A duty

confirming to IS for (H ) 400A Cat-lll Rupees and Twenty

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with Six Hundred Fifty Nine

necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 18.00 659.07 Rupees and Seven

busbar,erected in existing cubical panel with necessary Paise

connections.(A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. Capacity

One Thousand Thirty

271 Rn.Mtr 9.00 1035.68 Five Rupees and Sixty

(C) Suitable for 300 Amp. Capacity

One Thousand Four

Hundred Sixty Seven

Rupees and Ninety

(D) Suitable for 400 Amp. Capacity

Two Thousand Two

273 Rn.Mtr 66.00 2204.03 Hundred Four Rupees

and Three Paise

providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following Five Thousand Four

Hundred Thirteen

274 along with shunt trip 220V AC. with all internal connections & Ea. 6.00 5413.77

complete erected in existing M.S.housing.. (3) 250 A -400 A , CT Rupees and Seventy

Ratio 1/400 Seven Paise

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

Six Thousand One

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

Hundred Seventy One

275 with all internal connections, spreader tinned copper & complete Ea. 3.00 6171.27

Rupees and Twenty

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

(15 NOS 100A MCCB + 7 NOS 63A MCCB)

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic Eight Thousand Fifty

276 release suitable to work on A.C.supply 50 c/s. with all internal Ea. 3.00 8054.32 Four Rupees and

connections, spreader tinned copper & complete erected in Thirty Two Paise

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal & Twenty Thousand

magnetic release suitable to work on A.C.supply 50 c/s. with all Nine Hundred Forty

internal connections, spreader tinned copper & complete erected Ea. 3.00 20944.66

Four Rupees and Sixty

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Six Paise

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A. with variable Thermal & Twenty Five

magnetic release suitable to work on A.C.supply 50 c/s. With all Thousand Two

internal connections, spreader tinned copper & complete erected Ea. 6.00 25228.60 Hundred Twenty

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Eight Rupees and

Providing and erecting Two way Centre off Four pole MCB Change

Eight Hundred Fifty

Over Switch (IS 13947-3 / IEC 60947-3) in existing box. (a) for

279 Ea. 6.00 851.65 One Rupees and Sixty

Providing and erecting Two way Centre off Double pole MCB Six Hundred Forty

280 Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box.(b) Ea. 3.00 641.95 One Rupees and

for 40 Amp. Cat. lll Ninety Five Paise

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III (D) 4 pole 440V 40 Amp. Two Thousand Seven

Hundred Eighty One

Rupees and Seventy

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time 1 Fifteen Thousand

minimum & LCD display. Also comprised permanent ON/OFF Eight Hundred Thirty

switching. Programming switches & housed in fire proof Ea. 3.00 15834.73

Four Rupees and

thermoplastic enclosure & transparent cover erected as required Seventy Three Paise

with necessary connection erected as directed.

Providing and erecting following additional parts for panel

mounting MCCBs (A)Extended operating rotary handle with pad

283 Ea. 9.00 873.05 Seventy Three Rupees

lock with three position trip,off,on suitable for 25A to 250 A panel

mounting cat-III

Providing and erecting following additional parts for panel

One Thousand Three

mounting MCCBs (B)Extended operating rotary handle with pad

284 Ea. 6.00 1309.58 Hundred Nine Rupees

lock with three position trip,off,on suitable for 400A to 630 A panel

and Fifty Eight Paise

mounting cat-III

Providing and erecting multifunctional meter suitable for

application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive power, Average

voltage Vavg, Peak demand power PM, QM, SM, Demand power P,

Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor

and displacement PF (signed, four quadrant), Calculated neutral

current, Active, reactive, apparent energy (signed, four quadrant), Fourteen Thousand

Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, One Hundred Twenty

285 Phase currents, Average current Iag, Peak demand currents, Ea. 15.00 14122.88

Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated Eighty Eight Paise

supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network

frequency 50 Hz, Type of network 3P, Display type 7 segments LED,

Display colour Red, Messages display capacity 3 fields of

characters, Display digits 12 digit(s) - 14.2 mm in height

Providing and erecting metallic vitrified danger notice board as per

language suggested by engineer incharge for MEDIUM VOLTAGE Sixty Eight Rupees

installation to be erected as per IS-2551. and Forty Eight Paise

Providing & erecting High Voltage Danger Notice Board sticker as Thirty Four Rupees

287 per language suggested by engineer incharge of standard size-as Ea 6.00 34.24 and Twenty Four

per IS 2551 Paise

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper One Hundred Five

288 conductor FRLS PVC insulated stranded wire of green colour for Mtr 984.00 105.28 Rupees and Twenty

earth continuity of following size(A) with medium class Rigid PVC Eight Paise

pipe and accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Two Hundred Forty

289 conductor FRLS PVC insulated stranded wire of green colour for Mtr 200.00 247.37 Seven Rupees and

earth continuity of following size(A) with medium class Rigid PVC Thirty Seven Paise

pipe and accessories.(h) 4 wire 6 sq. mm

Supplying & erecting Flexible PVC insulated multistrand multicore

1.1 KV grade ISI marked Copper Wires of following Size to be Forty Three Rupees

erected as directed. e) 1.50 Sq.mm 3 core round PVC sheathed and Sixty Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

One Thousand Three

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Hundred Ninety Nine

291 with necessary clamps or in existing trench / pipe of following size Mtr 420.00 1399.45

Rupees and Forty Five

of cables (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

One Thousand One

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

292 with necessary clamps or in existing trench / pipe of following size Mtr 840.00 1160.64

Rupees and Sixty Four

of cables (I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Four Hundred Eighty

293 with necessary clamps or in existing trench / pipe of following size Mtr 420.00 483.60 Three Rupees and

of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Sixty Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Six Hundred Seventy

294 necessary clamps or in existing trench / pipe at road crossing or Mtr 660.00 672.76 Two Rupees and

floor of following size of cables.(A) 4 core 10 Sq. mm Seventy Six Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Five Hundred Six

295 wall with necessary clamps or in existing trench / pipe at road Mtr 720.00 506.71 Rupees and Seventy

crossing or floor of following size of cables. (C) 4 core 6 Sq. mm One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Three Hundred Sixty

296 wall with necessary clamps or in existing trench / pipe at road Mtr 2580.00 361.21 One Rupees and

crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Twenty One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Two Hundred Twelve

297 necessary clamps or in existing trench / pipe at road crossing or Mtr 1140.00 212.27 Rupees and Twenty

floor of following size of cable.(A) 3 core 2.5Sq. Mm Seven Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty One Rupees

going tails, insulating tape etc for following size of cables.(A) 2 to 4 and Sixty Seven Paise

core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty Six Rupees and

going tails, insulating tape etc for following size of cables. (B) 2 to 4 Eighty One Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty Six Rupees and

going tails, insulating tape etc for following size of cables. (C) 2 to 4 Eighty One Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated Two Hundred Seventy

301 armoured cable complete with out going tails, insulating tape etc Ea. 6.00 279.03 Nine Rupees and

for following size of cables.(I) 3 & 1/2 core 300 Sq. mm Three Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated Two Hundred Forty

302 armoured cable complete with out going tails, insulating tape etc Ea. 12.00 246.51 Six Rupees and Fifty

for following size of cables. (H) 3 & 1/2 core 240 Sq. mm One Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

One Hundred Thirty

303 armoured cable complete with out going tails, insulating tape etc Ea. 6.00 130.10

Rupees and Ten Paise

for following size of cables .(D) 3 & 1/2 core 95 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

Ninety Eight Rupees

304 connected to switchgear terminals with brass/cadmium plated nut Ea. 18.00 98.43

and Forty Three Paise

bolts in an approved manner.(K) 300 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

Fifty Nine Rupees and

305 connected to switchgear terminals with brass/cadmium plated nut Ea. 6.00 59.92

Ninety Two Paise

bolts in an approved manner.(H) 150 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & Eighty Four Rupees

306 connected to switchgear terminals with brass/cadmium plated nut Ea. 36.00 84.74 and Seventy Four

bolts in an approved manner.(J) 240 Sq.mm. Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

Forty Four Rupees

307 connected to switchgear terminals with brass/cadmium plated nut Ea. 12.00 44.51

and Fifty One Paise

bolts in an approved manner. (G) 120 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & Thirty Nine Rupees

308 connected to switchgear terminals with brass/cadmium plated nut Ea. 18.00 39.37 and Thirty Seven

bolts in an approved manner. (F) 95 Sq.mm. Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

Nineteen Rupees and

309 connected to switchgear terminals with brass/cadmium plated nut Ea. 6.00 19.68

Sixty Eight Paise

bolts in an approved manner. (D)35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Seven Rupees and

310 connected to switchgear terminals with brass/cadmium plated nut Ea. 705.00 7.71

Seventy One Paise

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Nine Rupees and

311 connected to switchgear terminals with brass/cadmium plated nut Ea. 144.00 9.41

Forty One Paise

bolts in an approved manner. (B) 10 Sq.mm

Providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, Ten Rupees and

power switchgears, motor starters & control wiring) with required Mtr. 90.00 10.27

Twenty Seven Paise

size of copper lugs, nuts and bolts if required.(a) One wire 1.00 sq.

(b) One wire 1.50 sq. mm Fifteen Rupees and

(c) One wire 2.50 sq. mm Twenty Four Rupees

314 Mtr. 90.00 24.83 and Eighty Three

(d) One wire 4.00 sq. mm Thirty Four Rupees

315 Mtr. 432.00 34.24 and Twenty Four

(e) One wire 6.00 sq. mm Fifty Three Rupees

and Seven Paise

(f) One wire 10.00 sq. mm

Eighty Six Rupees and

Forty Five Paise

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed steel

conduit of following pairs, cores and size including connections and Fifty Two Rupees and

interconnections etc. as required. Twenty One Paise

speaker cable Single pair, 2-core, 1.5 sqmm

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same Forty Six Rupees and

and making the surface as normal ground. Twenty Two Paise

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in Sixty One Rupees and

existing trench for laying of cable. below ground / road surface for Mtr. 780.00 61.63

Sixty Three Paise

enclosing cable (A)50 mm outer dia.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

One Hundred Forty

flexible Submersible copper cable approved make of following

321 Mtr. 150.00 145.51 Five Rupees and Fifty

Size. (C) 3 Core x 4 Sq. mm

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

Two Hundred Sixty

below ground across the road crossing or on floor with necessary

322 Mtr. 150.00 262.77 Two Rupees and

material in an approved manner and making the ground as per

Seventy Seven Paise

original(E)150 mm dia

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical Five Thousand Seven

(CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC Hundred Fifty Eight

323 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar Ea. 48.00 5758.71

Rupees and Seventy

content:- <2%(C) Back fill Compound :- Earthing compound should One Paise

be capable to retainmoisture for long time Necessary test report

must be submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical Eight Thousand Six

(CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC Hundred Thirty Four

324 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar Ea. 18.00 8634.64

Rupees and Sixty Four

content:- <2%(C) Back fill Compound :- Earthing compound should Paise

be capable to retainmoisture for long time Necessary test report

must be submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent (c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent

Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling

Compound :2 nos Bags of 25 Kg

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Three Hundred Sixty

325 specially prepared earth pit complete with necessary 8 SWG earth Ea. 21.00 368.05 Eight Rupees and Five

wire. - to be used for each Street Light Paise

For using salt and charcoal / coke as required for pipe type

One Hundred Seventy

326 Ea. 21.00 171.18 One Rupees and

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) Seven Hundred Six

327 suitable for safe earthing device. Ea. 12.00 706.14 Rupees and Fourteen

Providing and erecting required size Copper strip for earthing of

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

328 Kg 510.00 794.30 Ninety Four Rupees

and Thirty Paise

Providing and erecting required size HOT deep Galvanised iron strip

for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

329 Kg 705.00 77.03 Rupees and Three

Motors etc. using proper clamp.

Providing pair of rubber hand gloves suitable for working on

KV/22 KV supply.

330 Ea 3.00 213.98 Thirteen Rupees and

Ninety Eight Paise

Providing printed instruction chart both in English and Gujarati and

One Hundred Twenty

duly framed with front glasses, for treatment of person suffering

331 Ea 6.00 128.39 Eight Rupees and

from Electric shock

Thirty Nine Paise

providng and erecting Approved make. energy meter 3 phase

Two Thousand Six

wire unbalanced load 500 V.50A / 100A complete erected as

332 Ea 3.00 2610.60 Hundred Ten Rupees

directed with necessary earth wire. Cat. III

and Sixty Paise

providng and erecting Suitable set of CTS for 100A Energy Meter

Two Thousand One

333 Ea 3.00 2105.60 Hundred Five Rupees

and Sixty Paise

Supplying rubber matting of following thickness as per IS:15652/IEC

61111 (b)4mm (LT PANEL, DG SET)

334 Sq. Mtr 24.00 1027.12 Twenty Seven Rupees

and Twelve Paise

Supplying and erecting approved make set of indicator lamps of

Forty Two Rupees and

335 LED type lamp, lens cover, Bakelite holder complete erected with Ea. 131.00 42.79

Seventy Nine Paise

necessary connections.

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor Fifteen Thousand

having.[C] For 3 HP 3 phase open well horizontal mono block pump Seven Hundred Six

set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head Rupees and Thirty Six

suitable for 50/65 mm dia delivery pipe Cat.II Paise

S.I.T.C. of single phase submersible pump set suitable for 100 mm

size or more dia bore well having motor capacity and discharge as

Seventeen Thousand

under with necessary panel box. Lifting and Lowering taken extra.

Six Hundred Six

337 (b) Motor rating 1.5 HP (16 stage) pump having capacity of 50 LPM Ea. 3.00 17606.52

Rupees and Fifty Two

at 60 mtr head suitable for 32 mm dia. delivery pipe Cat.II

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-

10/8-14/10-16 Amp. Rating relay (variable current setting) directly

operated in totally insulated elegant enclosure and 18 Amp. Rating

power relay with start - stop button for single phase operation up

to 3 HP as per complete erected on P.W. Block with following

features. One Thousand Six

338 Low voltage cut off below 140 V Ea. 3.00 1602.30 Hundred Two Rupees

High voltage cut off above 280 V and Thirty Paise

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying and erecting Direct on line starter with 30 Amp. (resistive

@ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range

C.T. Operated electronic overload relay in engineering grade plastic

enclosure for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high

voltage protection (above 480 v) and under voltage protection

(below 330 v) current sensing single phasing protection. Reverse Two Thousand One

Hundred Sixty Seven

339 phasing protection, inverse current characteristic overload Ea. 6.00 2167.22

protection with indication for On, OL, HV,LV SPP in a single unit Rupees and Twenty

with feather touch start / stop push button, high temperature with Two Paise

standing Bakelite terminals complete erected on P.W. Block with

necessary connection. [Cat.II]

Supplying & erecting approved make Automatic liquid level

controller 6A.as per instruction of Engineer in charge on site

complete with wiring connection with existing wires , with copper Two Thousand Three

Hundred Fifty Three

340 conductor from pump to upper and lower tank.(Size Not less than Ea 3.00 2353.82

1.5 Sq MM) from pump to upper and lower tank with ISI marked Rupees and Eighty

Rigid PVC Pipe. Two Paise

Supplying Electrically operated siren on single phase 220-250V AC Twenty Eight

50HZ supply , RPM 2800,Horizon/verticle single mount having Thousand Eight

341 sound output level more than 100DB with IP 55 protection . Ea. 3.00 28814.96 Hundred Fourteen

Diametrical audible range of (i)5km Rupees and Ninety Six

Providing cement concrete foundation &. with plastering for

One Thousand Three

horizontal siren motor mounting stand of size 60 x 60 x 25 cms.

Hundred Twenty Six

342 With foundation nuts & bolts of required size, to be fixed at 4 Ea. 3.00 1326.69

Rupees and Sixty Nine

places with each plate of tower, with necessary hard rubber sheet

packing 1.2cms. thick.

Providing & erecting M.S. Protection roof stand having 3.3 mtr.

height made from M.S. angle iron section of 35 mm x35 mm x5 mm

with foundation on each six legs. 6 Nos. legs are supported by

mm x 25 mm x 5 mm cross M.S. angles with each other rigidly fixed

with nuts, bolts also fixed horizontally on siren tower. The main Eight Thousand Three

roof & cap made from M.S. sheet of 14 G(2.00 mm) duly welded Hundred Eighty Eight

with standing angles as per drawing. The necessary holes in the top Ea. 3.00 8388.14

Rupees and Fourteen

plates of the main roof shell be provided. The whole structure duly Paise

painted with one coat of red oxide and two coats of enamelled

paint (as per Drawing.)

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch incoming, Eight Thousand Seven

wires duly socket crimped, main contactor & overload relay, start - Ea. 3.00 8709.11 Hundred Nine Rupees

stop push buttons, to be erected on angle iron frame grouted on and Eleven Paise

wall as directed. The isolator, overload relay & contactors will be of

L & T, Siemens or BCH make only. (B) DOL for 7.5 H.P.

Supplying and erecting horizontal / vertical mounting type storage

water heater with copper container housed in M.S./S.S./ABS body

insulated with glass wool/puff complete with heating Twelve Thousand

elements,adjustable thermostats 300C to 850C, indicating lamp, Seven Hundred Fifty

safety valve, fusible plug, etc.complete erected with coach bolts, Ea. 5.00 12753.39

Three Rupees and

nuts. washers & cementation (E)50 Ltr. with 2 KW. heating Thirty Nine Paise

element Premium Category

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable Fourteen Thousand

346 foundation (Included) as per details given by manufacturer Ea. 21.00 14009.90 Nine Rupees and

considering site requirement. (G) 8 Mtr. Long 70 mm Top X 155 Ninety Paise

mm bottom dia, 3 mm thickness with 260mmX260mmX16mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

Approx Pole weight 84 kg

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of 1.5.mtr.

length with 110 deg.with vertical plane & suitable welded stays, Six Hundred Twenty

reducer and with check nuts complete painted with one coat of Red Ea 21.00 624.83 Four Rupees and

oxide / PU base primer and two coats of Aluminium / PU paint. Eighty Three Paise

paint with following nos of arms

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting B class galvanised iron pipe 32 mm outside

dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. Three Hundred Forty

348 base plate, erected on wall or corner for mounting street light Ea 30.00 342.37 Two Rupees and

luminaire with necessary hardware materials duly painted. Thirty Seven Paise

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loopout approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking Eight Hundred Ninety

349 arrangements with mounting clamp with nuts, bolts & washers Ea 36.00 898.83 Eight Rupees and

suitable for erection on pole with cable clamps& earth bolt of Eighty Three Paise

following size of box.(a) 300mm x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker duly marked

Two Hundred Thirty

with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in

350 Ea 21.00 239.66 Nine Rupees and Sixty

cement foundation as directed by Engineer in charge.

Supplying and erecting B class Galvanized iron pipe having smooth

finished bore of the pipe on both ends erected nuts and bolts along One Hundred Seventy

351 the pole / wall shaping the pipe as per site requirement. Pipe dia as Mtr. 42.00 179.75 Nine Rupees and

following.(a) 25 mm dia Seventy Five Paise

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed 120 to 300 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.CREE /OSRAM /

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED Four Thousand Nine

used for luminaire. ( fittings required LM-79 & LM-80 Hundred Ninety Six

certificates)(NOTE: Below description have shown ranges of Rupees and Ninety

Wattage capacity of LED fittings.The Engineer incharge may select Three Paise

any wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection - 4KV integral and 10 kv non integral ,Light

must have 440VAC line supply protection. It should withstand

hours for 440VAC line supply.(ii) above 48 to 60 Watts Cat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio Ten Thousand Eight

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > Hundred Seventeen

353 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Ea 9.00 10817.27

Rupees and Twenty

description have shown ranges of Wattage capacity of LED Seven Paise

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.(vii) above 200 to 250 watts Cat-lll

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with base plate Three Thousand One

354 Ea 45.00 3160.10 Hundred Sixty

160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III Rupees and Ten Paise

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time 1 Three Thousand One

minimum & LCD display. Also comprised permanent ON/OFF Hundred Sixty Six

switching. Programming switches & housed in fire proof Ea 3.00 3166.95

Rupees and Ninety

thermoplastic enclosure & transparent cover erected as required Five Paise

with necessary connection erected as directed.

Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT having

following specifications : It should have large fully serrated platform Thirty Three

15” wide 20” deep which locks ladder , Aluminium feet with thick Thousand Eight

356 rubber tread, top rail guard to serve as a railing, two pairs of gusset Ea. 3.00 33894.92 Hundred Ninety Four

support at the bottom step and All gussets are heavy duty steel. Rupees and Ninety

Capacity : 300 lbs. Two Paise

Supplying and erecting, commissioning and testing of Diesel

Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine with

multi-cylinders developing suitable BHP not less than following

capacity at 1500 RPM with 10% overload for one hour in 24 hours

with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil Five Lac Forty One

bath air filler, lubricating oil pressure gauge, end exhaust manifold, Thousand Two

357 standard set of tools with adjustable spanners, screw drivers, Each 3.00 541291.53 Hundred Ninety One

cylinder head to cover, joint cylinder head to exhaust, element lube Rupees and Fifty

oil filter, 12 / 24 volts electric starting equipment complete with Three Paise

standard heavy duty battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer (With DEF System) and vertical

hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and

piping and drip proof alternator, self excited, self regulated, screen

protected, with excitation system, capable of delivering the rated

system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running

at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation

+/- 5% of rated voltage from no load to full load. Both the engine

0 and alternator fitted on a common fabricated steel base plate with 0.00 0.00 0.00 No Rupees

antivibration mounting engine and alternator both connected to

each other by flexible flange coupling and with floor/wall mounted

control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control

panel shall be connected with provided suitable capacity armoured

cable and complete with Acoustic enclosure (canopy) made out of

16 SWG CRCA Sheet, sound absorbing material Rockwool of

density & 100 mm thick conforming to IS:8183 / PU Foam of

Density - at least 40 mm. The resin bonded rockwool covered from

inside the canopy by perforated sheet with 3/4 mm holes, sound

level not more than 75 dB at a distance of 1 mtr, as per PVCT

norms.DG set should have in built fuel tank capacity of minimum

hrs of continous running capacity on full load . Erection,

commissioning and satisfactory testing as per requirement with

0 first filling of fuel (minimum up to the 80% of fuel tank capacity), 0.00 0.00 0.00 No Rupees

oil, etc. with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from Electrical

Inspector. The Capacity and Ratings of DG sets are as below. (As

per new CPCB4+ Emission norms Engine With - Turbo Charger,

EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System),

DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction),

Integrated wiring harness connected to ECU .)

(I) Continuous Rating of 62.5 KVA ,BHP not less than 76 BHP

0 0.00 0.00 0.00 No Rupees

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating

set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked

contactors (for mains & generator) Overload relay for generator

contactor Neutral contactor for mains and generator Power socket

for connections. Fifty Seven Thousand

2) Control and metering module: Line voltage monitor. Generator Three Hundred Forty

358 voltage monitor Ammeter 3 items attempt start facility. Air circuit Each 3.00 57347.46

Seven Rupees and

breakers/MCB/MCCB of suitable rating for auto/manual operation. Forty Six Paise

Auto/manual switch. Emergency stop push buttons. Manual start

push button. frequency meter. Engine hour meter. Two earthing

3) Protection module: The engine shutdown in the unlikely event of

Low lube oil pressure High cylinder head temperature. V belt

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop 0.00 0.00 0.00 No Rupees

battery charger.

The AMF Panel of following capacity

(C) ATS Panel for 50 / 62.5 KVA 3 phase DG Set

Providing and erecting Inverter based approved make Cassette

type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with

accessories etc. duly connected separately erected evaporating One Lac Nineteen

359 unit and blower motor with its accessories by Eco friendly Green Each 6.00 119402.54

gas charging & Internal copper wiring & Remote control ( 3 star and Hundred Two Rupees

above of current year) with necessary core cutting.(C) for 3 ton and Fifty Four Paise

capacity- 1/3Phase

Providing and erecting Inverter based approved make Cassette

type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with One Lac Forty Five

accessories etc. duly connected separately erected evaporating Thousand Nine

360 unit and blower motor with its accessories by Eco friendly Green Each 5.00 145936.44 Hundred Thirty Six