ADDITION ALTERATION TO CERTAIN BUILDINGS AT JOSHIMATH AND AULI UNDER GE 871 EWS

Amount

S & F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to disturbed floor as per existing including removing of debris from site (At a place as directed), complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, excluding flushing cistern but including fixing bolts, flush pipe, PVC seat cover (same colour of WC pan), 'S' trap of suitable size & CP fancy type water jet with pipe and connection to drain or outgoing pipe with antisyphonage pipe, complete all as specified and directed

S&F PVC (SWR) 'S' trap, complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

Supply & fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and directed.

M&L for rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings of Fe 410 –W (Gde- E- 250), quality-A, heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

S & F mild steel screw bolt dia of shank 5 to 10 mm (machine made) n. exc. 5cm in length, with haxagonal or square head at one end and screwed the other or screwed both ends, each screw end to be fitted with washer etc. complete all as specified and directed.

M&L for coloured non-skid, joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

M&L for coloured non-skid, joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing floor hearth and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

M&L for colour glazed ceramic tiles as in vertical surface of size 350x250x7mm or 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing wall hearth and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

All as per item no. 09 but on vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, including dismantling of existing wall hearth and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL) and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and directed.

Dismantling timber scantlings, 40 Sqcm over in section in any position, fixed with nails unframed work, complete all as specified and directed.

Dismantling timber scantlings, 40 Sqcm and under in section in fillets, rails, posts, rafters, purlins, etc. fixed with nails, complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling of walls boards(fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets, any thickness including cover fillets etc, complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks n. exc. 10 cm in width (with plain or interlocking joints as directed) and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

S&F 100mm dia, cast iron sand cast soil waste and vent pipe, in any length with or without ears, with cement joints, fixed to wall, complete all as specified and directed

S&F in repairs 100mm dia, cast iron sand cast soil waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches, complete all as specified and directed

S&F in repairs 150mm dia, cast iron sand cast soil waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches, complete all as specified and directed

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested, 150mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested, 100mm bore of pipe, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bends, kerbs, string courses, coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 as in cover slab, chajja, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete all as specified & directed.

Supply only pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, swan neck, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S&F in repairs brass CP wash basin mixer for mixing hot & cold water, swan neck, screwed down for 15mm bore GI pipe and fixed, complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re-fixing and stacking at a place as directed at site, complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

Refixing old serviceable steel tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed for following size of pipe :- Note :- Serviceable pipe, obtained from serial item nos. 33 to 33.1 shall be re-used under this item. (a) 15 mm dia bore

(b). 20mm dia bore.

S&F, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

S & F in repairs 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15 mm bore stop valve cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

S & F in repairs 15 mm bore angle valve cast copper alloy, fancy type, chromium plated with long shank and cup, screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F 75mm dia stainless steel, chromium plated grating, complete all as specified and directed.

S&F in repairs grating square 150mm size of PTMT (Minimum weight 100 qms), complete all as specified & directed.

M&L for providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate, set in CM 1:4 as in jallies, 25mm thick (Measured solid) incliding mouldings but excluding frames, complete all as specified and directed.

S&F soap dish, chromium plated steel / stainless steel of size 160x160x1mm thick, fixed to wall with plug & CP brass screws, complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, including fixing pillar tap & PVC connection, with & including 32 mm dia PVC waste pipe, waste coupling , complete all as specified and directed. Note :- Pillar tap & PVC connection shall be measured & paid separately as supply only under respective items of BOQ

S&F vitreous china urinals white half stall type ( excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws pointing around urinal back in cement complete all as specified and as directed.

S&F 32mm dia PVC waste pipe of suitable length, complete all as specified and directed

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), confirming to IS-12701 (1996), three layered construction hoisted and fixed in position including making all connections complete all as specified and as directed.

S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), confirming to IS-12701 (1996), three layered construction hoisted and fixed in position including making all connections complete all as specified and as directed.

M&L for 1.25mm thick pressed steel frames of 125x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-06 Nos. & 75mm size-02 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all as specified and directed.

M&L for 1.25mm thick pressed steel frames of 105x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-03 Nos. & 75mm size-01 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all as specified and directed.

S&F in repairs 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia of suitable length and complete internal macanism including brackets, complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe of suitable length, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

Supply only 15 mm bore PVC connection 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repairs 15 mm bore PVC connection, 600 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repairs 15 mm bore PVC connection, 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repairs, 75mm dia, cast iron floor trap with and including suitable size chromium plated stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to iron pipes or union, complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

S & F 35mm thick second class hard wood, factory made glazed and skeleton door shutter open rebated and prepared to receive glass or gauge etc (Without sash bar) edges of framing plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters shall be as specified in SSR Part-I 2009 section 8 clause 8.24(a).

S&F 30mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides including 35x6mm thick teak wood lipping around the shutter, complete all as specified and directed

S & F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

M&L for standard aluminium section, powder coated of approved colour, suitable for door / window frames & shutters, sliding / fixed shutters and partition, lovered etc with one or more rebates including joining cleat for fixing, rubber beading / lining, pivot, locking arrangement and fixed in position with stainless steel screws, complete all as specified and directed. Note:- Lock & rubber beadings shall be measured and paid separately under respective items of BOQ. Make:- Hindalco / Jindal / NALCO

S&F rubber beadings suitable for fixing glass panels in aluminium door frames, complete all as specified and directed

S&F 75mm size brass mortice lock, vertical type, 4 levers, complete all as specified and directed

S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F aluminium anodized DG 102 "DECO" grill of size 100x10x7mm thick, approved design for windows / ventilators with and including F/U Channels, complete all as specified and directed

S&F prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work or aluminium frame work, complete all as specified & directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty or rubber & aluminium beading in square n. exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F mild steel 375mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F floor door stopper, over all length of cover plate 140 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F 150 mm size aluminium anodised handles, fabricated type, anodised, complete all as specified and directed.

S&F PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing.

Supply and fixing factory made solid PVC shutters, 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; Panneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, supply and fixing in the frame at site as per specification and drawing.

M&L for applying two coats cement base paint (snowcem) over a coat of alkali resistant priming paint on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for two coats of oil emulsion distemper on new surfaces of walls inlcuding chalk whiting on new plastered surfaces as in preparatory work prior to distempering, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for chequrred cement concrete tiles 300x300x25mm thick, machine pressed with grey cement and pigment, prepolished, coloured, set, jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:6, set, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in in hard / dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in in hard rock complete all as specified and as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) exc. 50 m but n. exc. 100m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with galzing bars dovetailed or welded, complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with out galzing bars dovetailed or welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 m and at change in direction, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for granite marble slab work, 20mm thick (Table rubbed and polished), as in steps, jambs, pillars, window cills, cooking & wash basin plateforms and like, set in CM 1:4 including pointing in white cement 1:2 using marble dust with mixture of pigment to match with shed of marble with & including 15 mm thick screed bed of CM 1:4 including rounding off exposed edges of slab, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick, laid over and including 20mm thick screed bed in cement mortar 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing & polishing until mirror finish, complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

All as per item No. 100 herein before but as on riser, trade such as dado / skirting, steps etc. over and including 15mm thick rendering in CM (1:4), complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces, complete all as specified & directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing cement slurry with 3.0 Kg of cement per sqm, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for preparation of old existing steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces, complete all as specified and directed.

M&L for preparation of old existing steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint on old steel surfaces, complete all as specified and directed.

S & F in repairs 25mm dia curtain rod, mild steel, chromium plated, medium grade with fixing brackets, stops, rollers etc with and including CP stainless steel brackets & PVC end knobs (02 Nos. in each curtain road), complete all as directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water etc. and removing the rubbish / debris to a distance as directed by Engr-in-Charge, complete all as specified and as directed.

M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surface on walls in CM 1:6 finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surface on walls in CM 1:4 finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick cement plaster on fair surfaces of brick work or concrete surface on walls in CM 1:4 finished the surfaces even & smooth without using extra cementwith mixing water proofing copound @3% by weight of cement, complete all as specified and directed. Note :- Water Proofing Compound shall be measured & paid separately under respective item.

M & L 40 mm thick damp proof course to horizontal or vertical surfaces including necessary form work, in cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate mixed with WPC complete all as specified and as directed. Note :- Water Proofing Compound shall be measured & paid separately under respective item.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane, including hacking out (If any) old broken glass (any thickness, quality & size), complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in foundation including rafts, footing foundation beams, base for column and mass concrete etc. , complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in column & pillar or posts etc. , complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in beams / lintel over 1.50m span, complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in chajja, complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed.

M&L for form work to soffit and sides of floor / roof beams, shelves & lintel, finished the surfaces fair, complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges, finished the surfaces fair, complete all as specified and directed.

M&L for TMT bars, Mild steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for TMT bars, 6-8mm, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

S&F in repairs, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an approved colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as directed.

S&F in repairs, pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an approved colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as directed.

Dismantling of plain or corrugated steel sheeting any gauge / thickness including Nainital or similar pattern from wall covering etc, complete all as specified and directed.

S&F in repairs suspended false ceiling system of grid size 600x600mm with and including main runner 38x24x1mm, cross Tee 29x24x0.8mm & wall angle 24x24x0.8mm with and including hangers of 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I flat 40x3 mm size of suitable lengths and expansion hold fasteners 12.5mm dia of suitable lengths including with designer boards of size 595x595x4mm thick fixed to GI snap grid and adjustment clips for providing light fixtures in position etc, complete all as specified and as directed

S&F 100mm sizes mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down sub main wire including GI earth wire / service connection of any size including battens / conduits of any size, fixed in any position, making good the disturbed surfaces of floors / walls, complete all as specified and directed.

M&L for concealed point wiring surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic concealed PVC conduit 20 mm or higher dia (including chase cutting in brick / stone/ block masonry walls for fixing conduit and making good disturbed surfaces), light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistranded copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with brass screws, cup washers and making good the disturbed surfaces, complete all as specified and directed for the following :- (a) One light point/ exhaust / ceiling fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and directed.

(b) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(c) One 3 pin 5/6 amps socket out-let point on same board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

All as per item No. 133 herein above but with 4 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 4 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed.

S&F switch piano flush type, single pole, one way 5/6 Amps complete all as specified and directed

S&F socket out let, two in one 3 pin 5/6 Amps and 2 pin 5/6 Amps , flush type, non shutters, non interlocking, complete all as specified and directed

S&F socket outlet two in one 3 pin 5/6 and 3 pin 15/16 amps (multipurpose), flush type non shutter, non inter locking type complete all as specified and directed

S&F in repairs switch piano flush type, single pole, one way 15/16 Amps complete all as specified and directed

S&F ceiling rose surface bakelite 62.5 mm x 25 mm two to three terminals complete all as specified and as directed.

S & F Lamp holder, PVC / polycarbonate with back plate & metal ring suitable for batten fittings, complete all as specified as directed

S&F in repairs 10 watts LED bulk head fitting with PDC aluminium housing and milky diffuser with and including 10 watts LED lamp etc complete all as specified & directed. Make:- Havells- HEXAFT10WLED857SSYMBOPC / Crompton - LBHP-10-CDL / Philips - WT202W LED65NW PSU S2 PC

S&F in repair LED integrated batten 4 feet long, 220 V surface mouted, 1x18 Watt prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. Make:- Havells- LUMILINEPLUSBS18WLED865SPCSS / Crompton - LDL-20-CDL / Philips - BN021C LED22S PSU CW GR

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall / fix of surface, complete all as specified and directed. Make:- Havells- DHDMSHODRW080002 / LEGRAND - 507611 / C&S - CSDBSPNPWXDD08

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed. Make:- Havells- DHDMSHODRW040002 / LEGRAND - 507610 / C&S - CSDBSPNPWXDD04

S&F in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed. Make:- Havells- DHDMSHODRW040002 / LEGRAND - 507670 / C&S - CSDBTPNPWXDD04

S&F MCB single pole, 240 volts, C Curve, 40 Amps of 10 KA, complete all as specified and directed. Make:- Havells- DHMZCSPF040 / LEGRAND - 408596 / C&S - CSMBS1C40

S&F MCB single pole, 240 volts, C Curve, 6-20 Amps of 10 KA, complete all as specified and directed. Make:- Havells- DHMZCSPF006-032 / LEGRAND - 408590 / C&S - CSMBS1C6

S&F MCB single pole & neutral, 240 volts, C Curve, 40 Amps of 10 KA, complete all as specified and directed. Make:- Havells- DHMZCSNF040 / LEGRAND - 408618 / C&S - CSMBS1C40N

S&F in repairs MCB triple pole & neutral 415 volts, C Curve, 63 Amps of 10 KA, complete all as specified and directed. Make:- Havells- DHMCTNFO063 / LEGRAND - 408683 / C&S - CSMBS1C63N

S&F electric bell, Ding Dong type AC 230 Volts complete all as specified and as directed.

S & F switch bell push button type 5 Amp single pole complete all as specified and as directed.

S & F 9 watt LED bulb, cool day light, 230/240 volts AC, complete all as directed.

S & F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amp, 240 volts, 10 KA, B curve complete all as specified and as directed. Make:- Havells- DHDPBDP032 / LEGRAND - 507811 / C&S - CSDBPSSPN020

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 Volt AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size & length, complete all as specified and directed. Make:- Havells- LUMILINEPLUSBS10WLED865SPCSS / Crompton - LCTLN-10-WW / Philips - BN021 LED12S 6500 PSU GR

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size & length, complete all as specified and directed. Make:- Havells- DROPDOWNFLAT 2X2PLR36WLED840S / Crompton - LCTLRP-36-FO-CDL / Philips - RC380B LED36S-6500G5 L60W60 PSU ODSG

Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixing the same with 25mm dia GI pipe light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x4mm duly painted and suitable size of nut & bolts etc. and making electrical connection with three core copper flexible wire of 0.50 Sqmm upto ceiling rose, complete all as specified and directed. Make:- Havells- ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC / Crompton - LSTS-36-CDL-M / Philips - BRP046 LED 36 CW MR S1 PSU GR

S&F for sub main wiring with PVC insulated, unsheathed two single core cable 1100 volts grade with copper conductor of size 2x6.0 sqmm of code Red for phase, black for neutral & green for earth, multi stranded drawn into & including suitable dia PVC conduit with and including 4.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: (i) Cost of PVC conduit and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 6 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S&F for sub main wiring with PVC insulated, unsheathed two single core cable 1100 volts grade with copper conductor of size 2x4.0 sqmm of code Red for phase, black for neutral & green for earth, multi stranded drawn into & including suitable dia PVC conduit with and including 2.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: (i) Cost of PVC conduit and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 4 sqmm cable and one run of 2.5 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

Supply and laying 40mm bore, GI pipe, light grade, laid under roads / drain / culvert, fixed to poles, walls with & including flat iron clamps bolts / nuts / washers / fittings (if any), complete all as specified and directed.

Taking down existing serviceable exhaust fan of any type carefully and re-fixing the same in same location after completing the addition & alteration works, complete all as directed.

Taking down carefully existing serviceable water storage electric geyser of any capacity and re-fixing the same in same location after completing the addition & alteration works, with and including 15mm did PVC connections heavy duty, length approx. 450 / 600mm – 02 Nos, hole fastener nut & bolts made of iron approx. length 6 cm – 04 Nos., complete all as directed

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 Part–I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4, type B1 & pit cover, 75mm thick in RCC 1:2:4, type B1 dully reinforced with 6mm dia bar @ 150 mm c/c both ways including with two Nos. lifting handle of MS round bar 10 mm dia and earth lead with and including GI protection pipe light grade 15 mm dia up to 7.5 m from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

Prem singh kuwarbi and co

M/s Arihant Builders