providing Tiles, Repair and painting of type-IV Qtr for M and T Sub-Division office

Amount

Repair to plaster in patches of 2.50 sqm and under and 10 to 15 mm thick i/c cutting the patch in square shape and replastering the surface of the wall including disposal of rubbish to the dumping ground with in a lead of 20 m and with CM 1:4 (1 CEMENT: 4 SAND)

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With enamel paint other than white

Extra over item No. 16040000 and 16041000 for every subsequent coat of paint with enamel paint other then white.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface.

Providing and laying Duro stone vetrified tiles (600x600mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. in Sal wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.2nd class deodar wood.

Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)- 6 mm thick

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead.-Not exceeding 3 sq.m in area

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:5 (1 Cement : 5 Sand) Second Class Bricks

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for doors, windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40 mm thick 2nd class deodar wood.

Applying priming coat over new wood based surface after and including prepering the surface by thoroughly cleaning oil, grease,dirt, and other foreign matter and sand papering and knotting.Readymixed paint brushing wood primer pink.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.:-110mm nominal size

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-Ordinary closet

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-Circular 460mm dia (countertop)

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings .

Providing and fixing C.P Brass bib tap with Capstan head-15mm dia

Providing and fixing C.P Brass pillar tap with Capstan head-15mm dia

Providing and fixing c.p. brass angle valve 15mm without Nuts and pipe.

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling .-5 litres net capacity.

Providing and fixing C.P. connection pipe with brass unions :- 45cm length-15mm nominal bore

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level :-1000 litres net capacity tank

Providing and fixing cast iron floor trap of self cleaning desion with sand cast iron screwed down or hinged grating with out vent arn complete including cost of cutting and making goods the walls and floors :- 100mm nominal diameter

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. -110mm

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:-15mm nominal bore

Providing and fixing brass full way valve with wheel:-15mm nominal bor

Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :-

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint In gratings framed guard bars,ladders, railling,brackets and similar works.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.-470 x 420 mm with boul depth178 mm.

Prem Chand

Sanjay Saini

DEEPAK SHARMA

Madhupal