HPSEBLBPHDJ/27/2023-24

Amount

Excavation in earth work and disposal of all excavated earth upto a lead of 20 mtr and lift upto 1.50 mtr disposed earth to be levelled and natly dresed PJW 50% each.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering ,shuttering, strutting and propping etc with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ- reinforced concrete and plain concrete work in vertical surface such as walls etc.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate20 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size ) with 15% plum and curing complete excluding cost of form work in retaining walls/Breast walls, the size of plums shall usually be 150 mm to 300 mm as per HPPWD specification.

Providing mild steel/Tor steel reinforcement for R.C.C work including bending binding and placing in position complete upto floor two level.( Tor steel)

Providing and laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work and reinforcement for R.C.C. work in Walls (any thickness but not less than 0.10 m thickness ) including attached butresses,pilasters,their caps and bases and string courses etc.from top of foundation upto floor two level:-

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in single section, brackets etc in beams, joists, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like

Providing and fixing nuts and botlts for holding the M. S. pipe complete in all respect.

Providing, laying and Jointing with butt welding MS tube along Penstock (Medium grade) including tube fitting (earth work to be measured and paid for separetely) 100 mm Nominal bore (MS PIpe).

Providing & fixing of new M.S. pipe 4 inch ( Medium grade ) with both end flunged T- 5 & welded with M.S.pipe by cutting of threaded porition ,gaskat ,Nuts & Bolts complete in all lead & lift.

Providing and fixing C.I. Sluic valve 100 mm dia.

VIJAY KAPOOR

MILAP CHAND KAPOOR