Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-Finance | L1 | Accepted-Finance Accepted Vide Resolution No.15(1) dtd.06-08-2025 of Delampady GP | |
| 2 | L2₹24.6 L+₹1.0 L (4.40%)Rejected-Finance | L2 | Rejected-Finance Higher rate and hence not admitted | |
| 3 | L3₹26.0 L+₹2.5 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Higher rate and hence not admitted | |
| 4 | L4₹26.5 L+₹2.9 L (12.3%)Rejected-Finance | L4 | Rejected-Finance Higher rate and hence not admitted | |
| 5 | L5₹26.5 L+₹2.9 L (12.3%)Rejected-Finance | L5 | Rejected-Finance Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | ABDUL RAHIMAN C M L2 | Raidco Kerala Limited L1 | The Metal Industries Ltd L10 | ASIM DESIGNING AND INTERIORS L7 | DREAM HOME FURNITURE L11 | SHAIZA INFRATECH L9 | NASIR K A L6 | Pratheesh M L4 | FIDCO ASSOCIATES L8 | CK Ahamed L5 | st antonys engineering works L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00CONSTRUCTION OF MINI MCF | ||||||||||||||
| 1.00 | 2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil | 7.56 | cum | 200 ₹1,512 | 8.4 ₹63.5 Lowest | 291 ₹2,199.96 | 272.85 ₹2,062.75 | 291.4 ₹2,202.98 | 276.26 ₹2,088.53 | 260 ₹1,965.6 | 255.78 ₹1,933.7 | 261 ₹1,973.16 | 261 ₹1,973.16 | 241.88 ₹1,828.61 |
| 1.00 | 4.1.3
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 7.56 | cum | 6,000 ₹45,360 | 203.82 ₹1,540.88 Lowest | 7,840 ₹59,270.4 | 7,341 ₹55,497.96 | 7,841.1 ₹59,278.72 | 7,449.1 ₹56,315.2 | 7,002 ₹52,935.12 | 6,882.19 ₹52,029.36 | 7,320 ₹55,339.2 | 7,000 ₹52,920 | 6,508.16 ₹49,201.69 |
| 1.00 | 10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 6,007.4 | kg | 125 ₹7,50,925 | 4.16 ₹24,990.78 Lowest | 165 ₹9,91,221 | 155 ₹9,31,147 | 165.6 ₹9,94,825.44 | 157.37 ₹9,45,384.54 | 148 ₹8,89,095.2 | 145.4 ₹8,73,475.96 | 155 ₹9,31,147 | 147 ₹8,83,087.8 | 137.5 ₹8,26,017.5 |
| 1.00 | 10.25.2
Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works | 9,471 | kg | 120 ₹11,36,520 | 3.98 ₹37,694.58 Lowest | 151 ₹14,30,121 | 141.5 ₹13,40,146.5 | 151.2 ₹14,32,015.2 | 143.42 ₹13,58,330.82 | 135 ₹12,78,585 | 132.79 ₹12,57,654.09 | 142 ₹13,44,882 | 135 ₹12,78,585 | 125.57 ₹11,89,273.47 |
| 1.00 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 538.65 | sqm | 650 ₹3,50,122.5 | 20.75 ₹11,176.99 Lowest | 724 ₹3,89,982.6 | 678.65 ₹3,65,554.82 | 724.8 ₹3,90,413.52 | 688.62 ₹3,70,925.16 | 647 ₹3,48,506.55 | 636.22 ₹3,42,699.9 | 681 ₹3,66,820.65 | 655 ₹3,52,815.75 | 601.64 ₹3,24,073.39 |
| 1.01 | 10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete | 23.62 | kg | 90 ₹2,126.25 | 2.83 ₹66.86 Lowest | 99 ₹2,338.88 | 92.98 ₹2,196.65 | 99.3 ₹2,345.96 | 94.4 ₹2,230.2 | 88 ₹2,079 | 87.23 ₹2,060.81 | 93 ₹2,197.13 | 90 ₹2,126.25 | 82.49 ₹1,948.83 |
| 1.01 | 13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work | 467.25 | sqm | 120 ₹56,070 | 4 ₹1,869 Lowest | 140 ₹65,415 | 131.37 ₹61,382.63 | 140.3 ₹65,555.18 | 133.06 ₹62,172.29 | 125 ₹58,406.25 | 123.2 ₹57,565.2 | 132 ₹61,677 | 126 ₹58,873.5 | 115.51 ₹53,972.05 |
| 1.01 | 13.71
Lettering with black Japan pint of approved brand and manufacture | 3,290 | per letter per cm height | 4.5 ₹14,805 | 0.15 ₹493.5 Lowest | 5 ₹16,450 | 5.12 ₹16,844.8 | 5.47 ₹17,996.3 | 5.47 ₹17,996.3 | 4.88 ₹16,055.2 | 4.8 ₹15,792 | 5 ₹16,450 | 5 ₹16,450 | 4.54 ₹14,936.6 |
Tender Value
₹29.7 L
EMD Value
₹50,000
Closing Date
16 Jul 2025, 3:00 pmClosed
RENJITH K C
Office of the Village Extension Officer, Delampady Grama Panchayat
Annual Plan-287/25 Mini MCF 2024-25-Mini MCF Construction in Delampady GP-General Civil Work
2025_DP_771893_1
VEO/01/T1/2025-26
Open Tender
Equipments
Item Rate
90 days
Delampady
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,760
Yes
₹50,000
Yes
16 Sept 2025
25 Jun 2025
19 Jul 2025
25 Jun 2025
16 Jul 2025
25 Jun 2025
Amount
CONSTRUCTION OF MINI MCF
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.71 Lettering with black Japan pint of approved brand and manufacture
ABDUL RAHIMAN C M (BID ID -2251503)
st antonys engineering works (BID ID -2252083)
Pratheesh M (BID ID -2243211)
CK Ahamed (BID ID -2252519)
NASIR K A (BID ID -2250578)
ASIM DESIGNING AND INTERIORS (BID ID -2252094)
FIDCO ASSOCIATES (BID ID -2252762)
SHAIZA INFRATECH (BID ID -2252021)
The Metal Industries Ltd (BID ID -2251786)
DREAM HOME FURNITURE (BID ID -2252362)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_eval.pdf
finance_1259978.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .