Provision of 12 mm thick frameless toughened glass door shutter and Vitrified tile flooring in entrance lobby in O/o CCA UP(East), Gomti Nagar, Lucknow.

Amount

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Two or more coats on new / old work.

Old work (one or more coats)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600x600 mm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

LMR ITEM

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades in treads of steps using tile size of 300 x 1200 mm in one peice and balance border of size 300 x 300 mm cut from 300 x 1200 mm size tile, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 1200x300 mm Antiskid

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps cut from tiles size of 600 x 1200 mm as per height of riser, laid on 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting of joints with white cement & matching pigment etc complete.

Size of Tile 1200x600 mm Antiskid

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & Floor spring (Ozone or equivalent)type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

P/f SS door handle 450 mm long for toughened glass door i/c required nut and bolts all complete all complete as per direction of Engineer in Charge.

Providing and fixing 100mm brass locks (godrej or equivalent) for toughened glass door shutter including necessary cutting and making good etc. complete.

Etching on glass door shutter of approved shape and size as per direction of Engineer In Charge.

Widening of existing door opening of size 1.0 M x 2.10 M by dismantling of existing door shutter including door frame, widening of door opening of size 1.5 M x 2.1 M including extending of RCC lintel in cement concrete 1:1.5 : 3 ( 1 Cement: 1.5 Coarse sand : 3 graded stone aggregate )by necessary dismantling of existing RCC in lintel and column, provision of reinforcement bars including necessary welding with old reinforcement and at site and scafolding and finishing the edge of opening in cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) all complete. ( Note : All operation for widening of existing opening upto 1.5 M x2.1 m size shall be measured as One Job except cost of welding charge shall be paid in relevant item)

Credit for old unserviceable / unusable M.S. sections such as angle, flat, square bars, reinforcement bars, GI/ C.I. pipes received from dismantling.

RAM ANUJ