Tender for Selection of Agency for Development of Planet Garden (Ramvatika)/ Park along with the O & M for Three Years in Chandlodia Ward – North West Zone

BILL OF QUANTITIES (B.O.Q.)

BILL OF QUANTITIES (B.O.Q.)

Name of the work: Tender for Selection of Agency for Development of Planet Garden

(Ramvatika)/ Park along with the O & M for Three Years in Chandlodia Ward – North

Name of Contractor: _________________________.

Correspondence Address: ____________________.

Tender Amount: INR 3,15,43,996.02 /- including all cost and taxes excluding GST.

Contractor’s Quoted Rate: -

Net Tender Amount: INR ___________________/- including all cost and taxes excluding

Amount In Words: (Rupees__________________________only) including all cost and

taxes excluding GST.

<The quote to be submitted online only>

Seal and Signature of the Bidder:

DYMC (Parks & Garden), Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Recapulation Sheet

Sr. No. Description Amount

Electrical Part A

Electrical Part B

Total (A+B+C+D)

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No 126,T.P Scheme No 72 (Chandlodia) Ram Vatika Park, Ahmedabad

No. Qty Item Rate Unit Amount

Survey by using own total station instrument for the topographical and contour survey work in 5x5mt

grid with 0.5mt contour interval, locating all existing features including preparation and submission of

survey drawing in A0 size sheet in one soft copy etc complete. including vehicle charges for

1 2.60 mobilization & demobilization of survey equipment, all hire charges for survey instruments & hire 2,469.00 Ha

charges for manual boat etc.

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

5 0.00 materials and disposing off theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil 128.52 Cu.m

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of

6 90.00 usefulmaterials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil Cu.m

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal

7 60.00 ofthe surplus excavated soil as directed within a leadof 50 Meter for following diameter of pipes.(iii) 1,509.00 each

Filling with light material like Charu / Boxite as directed including cement mortar Plaster 10 mm thick

in CM. 1 3 in all Around Surface (sides of Beams and top of sunk slab) including adding water

proofing material like SUNANDA, FOSROK or PIDILITE to be used as a 0.15 Litre to 1 cement bag and

8 10 making the surface clean and attractive as design at any height, with all lead and lift up to height 30 3,275.43 Cu.m

metre etc. complete as directed by EIC.

PCC - Providing and laying cement concrete 1 3 6 (1-Cement 3- coarse sand 6- hand broken stone

9 19.78 aggregates 40 mmnominal size) and curingcomplete excluding cost of formwork in (A) Foundation 2,976.00 C.mt

Brick work using common burnt clay building bricks having crushing strength not less than

10 30.00 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1 6 (1- Cement 6 -fine sand)(A) Modular 4,241.70 Cu.m

11 60.00 Extra for brick work in superstructure above plinth level upto floor two level (A) Modular 4,842.75 Cu.m

Half brick masonry in common brunt clay building bricks having crushing strength not less than

12 48.04 Kg/Sq.Cm. in Cement mortar 1 4 (1- Cement 4 -coarse sand ) in foundation and plinth (A) Modular 584.68 Cu.m

Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete

including the cost of formwork but excluding thecost of reinforcement for R.C.C. work in

(B)COLUMNS (iii) Having cross-sectional area morethan 0.12Sq.M and upto 0.18 Sq.M

Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete

including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS

(iii) Having cross-sectional area more than 0.125qM and upto 0.18 Sq. M

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in

position complete upto floor two level

Providing and fixing M.S. grills of required pattern to wooden framesof windows etc. with M.S. flats

16 6500.00 at required spacings and framealround, square or round bars with round headed bolts and nuts or by 143.64 kg

screws. (B) ORNAMENTAL GRILL

Structural steel work ( Confirming to IS 4923-1997) riveted,bolted or welded in builtup for all type

sections, inframed work,including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primerall complete as per the structural designs and directions of Engineer in charge.

Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth in Cement

18 50.00 Mortar 1 5 (1-cement 5-coarse sand including levelling up etc. complete 2,517.13 cu. Mt

Providing Pucca pitching at periphery of Bank slope including excavation, filling with sand, and PCC (1

19 60.00 3 6) of 0.30 x 0.30 x 0.35 at 3 m c/c also provide Rubble masonry of 0.23m thick in between pata pcc 965.82 Sq.mt

with Pointing of (1 3) as Directed.

No. Qty Item Rate Unit Amount

Gabion Boxes of height 1m

Supply of Mechanically Woven Double Twisted Hexagonal Shaped Wire Mesh 1m High Gabion Boxes

as per IS 16014,MORTH 2013 specification Clause 2500, of required sizes, Mesh Type --, (Zn(..%)+Al(..

%)alloy)+ Polymer (PVC) coated ,Mesh Wire dia. --- (ID/OD), mechanically edged/ selvedged, with

partitions at every 1m interval and tying with lacing wire of dia -- mm (ID/OD), supplied @ 3% by

weight of gabion boxes (excluding transportation) ,as per detailed specification conformingto codes

in vogue all complete as per directions of engineer-in-charge.

Stone for the Gabion/revet mattress facia shall be hard, angular to round, durable and of such quality

that they shall not disintegrate on exposure to water or weathering during the life of the structure.

The stone size shall range between 1.5 to 2.5 times mesh opening. Each range of sizes may allow for a

variation of 5% oversize or 5% undersize, or both. The size of any oversize stone shall allow for the

10.00 placement of minimum of three layers of stone must be achieved when filling the 1 m high units and 3,600.00 cu. Mt

a minimum of two layers for the 0.50 m high units. The stone used for filling the gabion facia shall

have a minimum density of 22kN/m3 and Los Angeles abrasion value not more than

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls

21 67.50 for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1 4 (1- 155.61 sq. mt

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

22 950.00 of 12mm thick backing coat of C.M. 1 3 (1- cement 3-sand) and 8mm thick finishing coat of C.M. 1 1 297.68 sq. mt

(1-cement 1-sand) etc. complete

Providing and making pergola with RCC Structure M25 according to Architectural drawing (5.50X

23 1.00 X 0.30 mtr) with installation and necessary transportation if needed etc comp. 24,305.00 No.s

Providing and making pergola with RCC Structure M25 according to Architectural drawing (4.50X

24 1.00 X 0.15 mtr) with installation and necessary transportation if needed etc comp. 17,520.00 No.s

Provdg. and fixing ornamental design decorative C.I.garden benches incl. painting with synthetic

enamal paint and fixing FRP 4.5' x 3" streep betten on sitting portion LN KEY MS fasteeners for FRP

1.00 streep fitting MS rod 4.5 feet length etc.comp. incl. SS name 8,500.00 No.s

plate of councillour.

Providing & Supplying Three Sitter SS Benches having 40mm dia.18 gauge SS 304 grade pipe for

handle end legs and also 1.60 mt long- 12 Nos Rectangle pipe of

size 19 mm x 45 mm SS 304 grade 18 guage for sitting & back rest work includes transportation at

any other site & any floor building upto hight as per inst, of

engineer incharge as per given specification.( As per RA) Three Seat SS Benches size L - 1.60 Mt X B -

Providing & Supplying Precast RCC with Minimum 4 Kg. Steel provided for seat, Back & lega having

following Size Length = 1.50 meter Finished Thickness = 60 mm Seat width = 0.45 meter Back Height =

0.45 meter Thickness of Supports (Legs) = 0.10 meter Height of Bench = 0.50 meter.The Rate includes

26.1 1.00 finishing the bench with White / Coloured Glaze tile of Square Pattern. The Rate including curing, 2,450.00 No.s

loading, unloading and placing at site as per instructions given by Engineer In-Charge.

Supply, Fabrication and Erection of Tensilestructure Canopy roofing as per Indian

Standard norms. The Tensile Structures shall be designed to withstand the prevalent windspeed as

per I.S. 875-Part 3. The steelstructure shall be designed as per I.S. 800. The steel fabrication and

erection shall beas per I.S. norms.The Scope of the work includes Fabricating,supply and installation

of tensioned membranestructure as per the approved drawing andspecifications. The membrane

should be ofPVDF Coated membrane of 750GSM of FERRARI/SEION/MEHLER make. Themembrane

Cutting, Seaming and HF Welding as per Euro standards. The clamping systems,if required, with

sectionalized aluminiumprofiles and kedar-incorporated edges or cablecentenary edges. The MS

Structural steel tubular sections shall be anchored in existingstructure using Chemical anchoring bolts

ofHILTI Brand. The primary supporting steelstructure shall be made out of MS tubularsections.The MS

structures shall be paintedwith one + two coats of enamel paint ofASIAN Paints Brand etc., complete

as directedby the NLCIL officers. The rate should include supply/fixing/anchoring of the base plates,

alllabour charges, cost and conveyance of all the materials.

No. Qty Item Rate Unit Amount

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm- H Kerb block for Footpath in M-20

grade using 20mm nominal size black trap aggregate of Sevaliya/Timba or equivalent quality

for pre-cast blocks, reasonably exposed finish/ formwork , mould with well equipped with vibratory

system for kerb stones of approved design including curing, etc. complete, including the cost of

formwork etc. complete. The rate shall also include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding with necessary equipments and materials. The

28 750.00 rate shall also include the flush pointing in CM (1 3) for all joints of the kerbstones. Filling of 432.00 rmt

zari alone the sides of the kerb stone fixed with Bituminous concrete Bituminous concrete /

C.C. mixed in proper position to flush with the road surface as directed by Engineer in change

to form a portable mixture.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

90.00 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of 113.40 sq.mt

loose powdered materials.etc complete

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.

GATE - Providing & fixing M. S. sliding gate made from 75 mm x75 mm x 3 mm M. S. square pipe as

frame and using 50 mm x 50 mm x 3 mm M. S. square pipe fixing in diagonal shape as per drawings

& design and doing duco spray paint to M. S. gate sections complete as per Engineer in charge.

Precast Concrete Bollard with exposed Concrete finishes M25 grade, Dark Grey Color (Pigment -

450gm/Nos) with Silicon surface coating. Size 250 x 250 mm bottom, 125 x 125 mm top, Height

mm. Rate is inclusive of Concrete & Steel (8 mm dia, Approx 2.5 kgs).

Providing and installing in position manual operated turnstile gate of stainless steel etc comp.

Providing & making, Fixing Stainless steel letters 12" height with led light behind the ACP board

34 2.00 complete as per instruction of Engineer in charge. 74,750.00 No.s

Providing, Supplying and instalation of FRP Dust bin 80 Ltr. Approx including Transportation,fitting

35 12.00 with necessary excavation & CC 1 2 4, curing, Colour etc. As Per Direction by Engineer In charge. 8,486.26 Nos

Providing and laying Cobble Stone (100 X 100) mm thick base of cement mortar 1 6 (1 Cement

36 115.00 coarse sand) or lime mortar 1 1 5 laid over and joined with grey cement slurry 60 mm thick. 1,495.00 Sq.m

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1 6 (1-cement 6-coarse sand) or L.M. 1.1.5 (1-Lime putty 1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

38 20.00 Chicken wire mesh 16 x24 182.20 Sq.mt

39 6.00 Non Decorative type 25 mm thick Door Shutter 801.69 No.s

Supplying, labour for excavation of all types of soil at any depth including excavation of asphalt

pavement of any thickness, demolition of brick work in CM of any proportion including stacking of

serviceable materials and disposal of unserviceable material etc. comp. as directed.

41 1.00 Mazdoor 493.00 Each

42 1.00 Providing & Supplying Hydraulic Excavator 1 cum bucket capacity @ 60 cum per hour 711.86 Hour

Tractor Trolley (Considering 1 Tractor Trolley for 20 Days (8 Hours per Day Rs.245 per Hour)

Providing & Laying China mosaic flooring on terrace with 6 mm th.white or coloured glazed tiles chips

44 37.00 of mini.25 to 35 mm Approved.Square or rectangular shape & fixing it with total hand work by 5,500.00 Sq.m

sculptor as per design . ( Designer )

Providing & Laying China mosaic flooring on terrace with 6 mm th.white or coloured glazed tiles chips

of mini.25 to 35 mm Approved.Square or rectangular shape & fixing it with total hand work by

sculptor as per design . ( Simple )

Stainless Steel Etched Color-Filled Nameplate with a perfect blend of precision and aesthetics. Crafted

from premium stainless steel, showcasing intricate laser-cut designs, precise etching, and vibrant

46 30.78 color filling, offering a visually appealing of 0.8 mm Laser cut Stainless Steel of size (600 x 900 mm) 16,675.00

and Etching and Colour-filled with Duco pain

No. Qty Item Rate Unit Amount

Designing, Providing and fixing Nav grah sculptures as per concept of Architectural design. Making

Design with approval by Authorities. Material is Corton steel and Stainless steel combination.

Thickness is 2mm to 5mm with water jet cuting, argon welding, salving, jointing, finish and buffing

47 1.00 both materials, in 6 to 8 feet diameter or rectangle shape total sculptures thickness is minimum 1 2,03,500.00

feet. With pedestal, as per concept and design. Installing at site as given instructions by authorities.

Designing, Providing and fixing Rashi Van sculptures as per concept of Architectural design. Making

Design with approval by Authorities. Material is Corton steel and Stainless steel combination.

Thickness is 2mm to 5mm with water jet cuting, argon welding, salving, jointing, finish and buffing

48 1.00 both materials, in 6 to 8 feet diameter or rectangle shape total sculptures thickness is minimum 1 2,03,500.00

feet. With pedestal, as per concept and design. Installing at site as given instructions by authorities.

Designing, Providing and fixing Nakhshatra Van sculptures as per concept of Architectural design.

Making Design with approval by Authorities. Material is Corton steel and Stainless steel combination.

Thickness is 2mm to 5mm with water jet cuting, argon welding, salving, jointing, finish and buffing

49 1.00 both materials, in 6 to 8 feet diameter or rectangle shape total sculptures thickness is minimum 1 2,03,500.00 Each

feet. With pedestal, as per concept and design. Installing at site as given instructions by authorities.

Providing & fixing 4 feet FRP floater with SS 304 steel stand & surrounding grill , 5 HP submersible

50 1.00 pump with 50 mt wire , 2" high jet brass nozle with single jet with SS light RGB . 1,98,594.00 Each

Providing & fixing 4 feet FRP floater with SS 304 steel stand & surrounding grill , 3 HP submersible

51 2.00 pump with 50 mt wire , cascade type nozle with single jet with SS light RGB . 1,57,814.50 Each

Providing and Fixing for pathway 6 inches of sand filling, 6 inches BBCC (Brick bet Cement Concrete),

52 550.00 6 inches Red Charu and Rolling E-Curing required at top of BBCC and Charu as per guidance of 1,500.00 Sq.m

engineer in charge

Providing and laying shot blasted Non - interlocking, Paver blocks of specified thickness, size, grade of

concrete and colour machine made and blasting by automatic shot blasting machine and high density

of as per approved sample of approved make for footpath, parking areas, service lanes,cross over and

other areas as mentioned in the drawing. Including providing and laying 50 mm thick averave

bedding layer of coarse sand below paver block as per required grading and specification. Laid paver

block shall be mechanically compacted. The work of the paving blocks shall be executed in line and

level by skilled mason of flooring work only. Small size of paver block with same specification shall be

53 180.00 used at residue or at end. It should be laid in such a way that the no cutting of the paver block to be 669.65 Sq.m

necessary. If cutting of paver block shall be required , than cut by machine only and laying to be done

by skilled flooring mason. The finished surface of the paver block shall have coarse sand Texture

Finish. Pave blocks shall be compacted and shall be re-laid if necessary. Actual laid area shall be

measured and paid without any wastage.

53.10 40.00 S. S. Name Plate 600.00 Each

Providing and laying shot blasted noninterlocking, paver blocks 80mm thick M-40 grede of specified

thickness, size, grade of concrete and colour machine made and blasting by automatic shot blasting

machine and high density of as per approved sample of approved make for footpath, parking areas,

service lanes, cross over and other areas as mentioned in the drawing. Including providing and laying

50 to 80 mm thick average bedding layer of coarse sand below paver block as per required grading

and specification. Laid paver block shall be mechanically compacted. The work of the paving blocks

shall be executed in line and level by skilled mason of flooring work only. Small size of paver block

with same specifications shall be used at residu or at end. It should be laid in such a way that the no

54 200.00 cutting of the paver block to be necessary. If cutting of paver block shall be required, than cut by 1,558.00 Sq.mt

machine only and laying to be done by skilled flooring mason. The Finished surface of the paver block

shall have coarse sand texture finish. Paver blocks shall be compacted and shall be relaid if necessary.

Actual laid area shall be measured and paid without any wastage.A) 80mm thick M-40 grade Paver

block of size 200mm x 200mm & 150mm*150mm & 200mm*100mm. Make VYARA or Equivalent

No. Qty Item Rate Unit Amount

Providing laying and jointing in true line and level U.P.V.C.Pipe(SCH 40)for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Provdg. & fixing UPVC Handle Valve of Prince, Supreme,

Astral, Finolex or Equivalent makes as per Dir. Of engg in charge

Providing And Jointing Stoneware Pipes Incl. Excavation Up to 2 Mt. Refilling, Transporting

Pipes To Work Site, Unloading, Lowering In Trench, jointing material Such As Cement, sand,

57 Hemp Bitumen As Directed, Incl. Watering The Trenches Spreading And Carting away Of Surplus

material as directed by engineer in charge.

0.00 a) 10 cm dia 134.00 Rmt

75.00 b) 15 cm dia 183.00 Rmt

100.00 c) 23 cm dia 386.00 Rmt

Providing and fixing screw down bibtaps of following size.

(A) Brass screw down bibtap polished bright. (i) 20mm dia.

Constructing Chamber of following size including excavation, refilling, BBCC (1 5 10) for foundation,

C.C.Channel (1 2 4), finished 15 mm thick cement plaster inside in CM 1 3, finishing with cement

59 slurry, Brick masonary in CM 1 5 & excluding the cost of chamber seat cover etc..completed. (Based

on Drainage SOR 2009-10)

0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to

0.90 meter for pipe dia <=150 mm.

Constructing Slab Type M.H. Chamber Of The Following Size Including Excavation, Refilling, Brick Bats

Cement Concrete (1 5 10) of thickness 15 C.M., CC Channel (1 2 4) of thickness 10 C.M., finished

mm thick cement plaster inside & outside (Only for shaft) In Cm 1 3, Finishing With Cement Slurry,

P/F 4 Mm Dia M.S.Steel Hdpe Coated Steps 35 Cm C/C At 35 Cm Staggered Masonary In Cm 1 5, Rcc

60 Slab In Cc1 1.5 3 of thickness 15 C.M.,Including Cantering & Reinforcement (Single jalli at 15 C.M. c/c

bothway 10 mm dia.)But Excluding The Cost Of Manhole Seat Cover Etc..Completed Of Size 0.75 X

1.00 Meter (Inside Clear, M.H. length should be parallel to the flow)

1.00 to 2.00 meter depth, (Slab at Ground level) (for pipe dia

2.00 to 3.00 meter depth, (Slab at below 0.60 mt. From G.L.)

(for pipe dia <=300 mm)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x

0.60 depth up to 1 mt including excavation, B.B.C.C. (1 5 10), 23 cms thick brick maso. wall in the

prop. of CM (1 6) with 40 mm thick IPS flooring in the prop M15 at bottom and 15 mm thick cement

plaster inside the catch pit in the proportion of CM (1 3) with out jali etc. comp. as directed. (As per

R.A. Based on Building SOR 2015-16)

CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear opening etc. comp.. As

62 25.00 directed by 1,500.00 Nos.

engineer in charge. (Based on Central Store Rate)

Manufacturing,Testing,Supplying,Loading,Transporting To Work Site, Unloading, Lowering In

Trenches, Laying And Jointing R.C.C.,Np-3 Class Pipes With socket and spigot joints as per IS

63 458-2003 Including EPDM Rubber ring as per IS 5382-1985 etc.comp. As Directed by engineering

in charge.(As per GWSSB 2021-22,Item No-10,10.1.D,Pg No-15)

a 100.00 300 mm dia 846.00 Rmt

Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete withspecial falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(F) 75mm

No. Qty Item Rate Unit Amount

Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete withspecial falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(F) 110mm

66 350.00 U PVC SCH40 for cold water 15 mm dia(1)" 42.37 Rmt.

67 20.00 U PVC SCH40 for cold water 15 mm dia(1/2)" 21.19 Rmt.

68 12.00 Providing and fixing Gun metal check or non-returnfullway wheel valve.(A) 15mm dia 184.98 Each

69 34.50 Kabooter Jali - 1" X 1" 325.00 Sq.mt

Providing erecting and fixing double coated ISIwater tank of 2000 lt capacity each with all

necessary fittings and connection etc. complete onterrace

30mm thick PUF Insulated continuous sandwich panels ( 0.5 mm thick pre coated GI sheet on both

70 55.00 side of Polyurethane foam with external face being corrugated) 1,138.77 sq.mt

Providing and laying Granite slab (18 mm thick) one side polished flooring over 20 mm (average) base

72 12.00 of cement mortar 1 6 (1 cement 6 coarse sand) or L.M 1 1.5 laid and jointed with grey cement slurry 2,672.00 sq.mt

including rubbing and polishing complete

73 3.00 Flat back wash basin Colour glazed 450 x 300 size 466.10 Each

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1 1 (1-Cement 1-fine sand) (Seal and

74 2.00 cover to be measured and paid for separately)(A) vitreous China Pattern (i) in white colour 1,290.80 Each

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for

76 4.00 Brass screw down stop cock 25 mm dia 184.98 Each

77 3.00 C.P. Pillar cock 15 mm Heavy duty swan neck 641.53 Each

78 2.00 C.P. Bib cock 15 mm Heavy duty with cap 396.61 Each

Providing and fixing Urinal of approved qualityincluding connection with trap and with integral

79 2.00 longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm 1,535.63 Each

Providing and fixing cast iron (Spun) Nahni trap ofthe following nominal diameter of self cleaning

80 7.00 design with C.I. screaed down or higned grating including cost of cutting and making good the walls 600.08 Each

and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

81 2.00 Health Fauset Heavy duty with hook with fitting 576.27 Each

Providing and laying Ceramic tiles 6mm thick inflooring treads of steps and landing laid on a bed of

82 13.00 12mm thick cement mortar 1 3 (1-cement 3-coarse sand ) finishing with flush pointing in white 960.47 Sq.mt

Providing and laying Ceramic tiles 6mm thick inskrting risers of steps and dedo on 10mm thick

83 68.00 cement plaster 1 3 (1-cement 3-coarse sand) andjointed with white cement slurry 1,028.11 Sq.mt

P & F UPVC WINDOW with km06 super system with 5-10-5 clear glass with clear white section with

slider lock ,fly screen sash with handle and roller as per manufacture detail specification and sections

using mosquitos net inside complete. (finesta or approve make)

Supplying and fixing double coated PVC water tank of syntex or ISI equivalant make including delivery

at site, supply and fixing of inlet, outlet, air vent overflow, ball cock, drainage sleeves of the specified

85 1500.00 size, with necessary neo-prene gasket/ packing/ washer, GI washer & check nuts etc. complete as 3.18 lt

directed on terrace, loft in bathrooms etc in any height. the rate shall include for fixing additional

accesories supplied by the accessories.

Providing & appliying on granules finish of Bakelite Hvlam Limited (No.21-3005, 3006, 3007,

3013, 3014, 3015 and 3016) trowelled over 20mm thick Mala finished / sand faced cement plastered

(Two coat of 12mm in CM 1 3 & 8mm coat in CM 1 1) sub strata to get an average finish coat

thickness of 0.08 to 1.2mm comprasing of three componets viz Dry granules, Granules bonding

agents and top coat of glossy finish ( Dry granules shell be made form silica sand pigments, chiefly

inorganic) homopolymer emulsion mix etc. of bakelite hylam product etc. and top coat made from

solvent based acrylic polymer of bakelite hylam product including scaffolding. Including providing

necessary grooves in surface as per instruction in charge.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

87 3000.00 Supplying and spreading of good earth like firtile soil as directed etc compt. 575.00 Cmt.

88 10000.00 Supplying and spreading of good quality river Kaamp Filling 100 mm as directed etc comp. 630.00 Cmt.

89 450.00 Supplying and spreading good Saaru dust on site rate including levelling and compection as per 1350.00 Cmt.

inst. given by site incharge.

90 1400.00 Supplying and spreading good lime dust on site rate including levelling and compection as per inst. 4.00 Cmt.

given by site incharge.

91 5950.00 Supply and Planting of best quality saplings of Hedge plants like kadvi mahendi,dyuranta, 20.00 Nos.

nikodeviya etc specifies bag size is 6 inch x 8 inch, well branched, well established & free from

disease at site as per the instructions Location and placement of given plant to be deciced by

person incharge.

92 10.00 Supply and Planting of best quality saplings of Rui ( milk weed ) Calotropis gigantea having 50.00 Nos.

height of minimum 5.0 to 7.5 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

93 40.00 Supply and Planting of best quality saplings of Palash ( butea monosperma) having height of 900.00 Nos.

minimum 8.00 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

94 450.00 Supply and Planting of best quality saplings of Apamarg ( Achyranthus aspera ) having height of 300.00 Nos.

minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched, well established &

free from disease at site as per the instructions.

95 25.00 Supply and Planting of best quality saplings of Umbar ( Ficus racemosa ) having height of 980.00 Nos.

minimum 8 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established & free

from disease at site as per the instructions.

96 70.00 Supply and Planting of best quality saplings of Khair (Acacia catechu) having height of 150.00 Nos.

minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched, well established &

free from disease at site as per the instructions.

97 20.00 Supply and Planting of best quality saplings of Peepal (Ficus religiosa) having height of 1100.00 Nos.

minimum 8 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established & free

from disease at site as per the instructions.

98 50.00 Supply and Planting of best quality saplings of Shami (Prosopis cineraria) having height of 550.00 Nos.

minimum 4.00 to 5 ft. and bag size is 15 inch x 16 inch, well branched, well established &

free from disease at site as per the instructions.

99 650.00 Supply and Planting of best quality saplings of Durva ( Cynadon dactylon ) Calotropis gigantea 100.00 Nos.

having height of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched,

well established & free from disease at site as per the instructions.

100 650.00 Supply and Planting of best quality saplings of Darbha ( Desmostachya bipinnata ) Calotropis 100.00 Nos.

gigantea having height of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well

branched, well established & free from disease at site as per the instructions.

101 20.00 Supply and Planting of best quality saplings of Rakta Chandan ( Pterocarpous santalinus ) having 1800.00 Nos.

height of minimum 6 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

102 10.00 Supply and Planting of best quality saplings of Sapta parni ( Alstonia scholaris ) having height 850.00 Nos.

of minimum 2.00 to 2.5 ft. and bag size is 21inch x 21 inch, well branched, well established

& free from disease at site as per the instructions.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

103 7.50 Supply and Planting of best quality saplings of Panas ( Artocarpus hererophyllus ) having height 750.00 Nos.

of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched, well established

& free from disease at site as per the instructions.

104 12.00 Supply and Planting of best quality saplings of Palash (Butea monosperma ) having height of 750.00 Nos.

minimum 2.00 to 2.5 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

105 12.00 Supply and Planting of best quality saplings of Ber ( Zizhiphus mauritiana ) having height of 1250.00 Nos.

minimum 6.00 to 8 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

106 6.00 Supply and Planting of best quality saplings of Aam (Mangifera indica ) having height of 1500.00 Nos.

minimum 8.00 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

107 12.00 Supply and Planting of best quality saplings of Bakul ( Mimusops elenjii ) having height of 850.00 Nos.

minimum 8 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established & free

from disease at site as per the instructions.

108 20.00 Supply and Planting of best quality saplings of Khair ( Acacia catechu ) having height of 450.00 Nos.

minimum 10 to 12 ft. and bag size is 15 inch x 11 inch, well branched, well established &

free from disease at site as per the instructions.

109 6.00 Supply and Planting of best quality saplings of Aswatha/ Peepal ( Ficus religiosa ) having height 450.00 Nos.

of minimum 8 to 9 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

110 25.00 Supply and Planting of best quality saplings of Sissam ( Dalbergia sissoo ) having height of 950.00 Nos.

minimum 2.00 to 2.5 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

111 25.00 Supply and Planting of best quality saplings of Shami ( Prosopis cineraria ) having height of 550.00 Nos.

minimum 2.00 to 2.5 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

112 4.00 Supply and Planting of best quality saplings of Vata vruksha ( Ficus benghalensis) having height 1200.00 Nos.

of minimum 2.00 to 2.5 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

Nakshatra vatika

113 16.00 Supply and Planting of best quality saplings of 600.00 Nos.

Kajra(Poison nut) Strychnos nux-vomica having height of minimum 2.00 to 2.5 ft. and bag size

is 8 inch x 10 inch, well branched, well established & free from disease at site as per the

114 3.00 Supply and Planting of best quality saplings of Amla (Indian gooseberry) Embilica officinalis 1250.00 Nos.

having height of minimum 9 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

115 3.00 Supply and Planting of best quality saplings of Umbar (Cluster fig) Ficus racemosa having height 450.00 Nos.

of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched, well established

& free from disease at site as per the instructions.

116 3.00 Supply and Planting of best quality saplings of Jamun (Java plum) Syzigium cumini having height 1250.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

117 7.00 Supply and Planting of best quality saplings of Khair (Cutch tree) Acacia catechu having height of 150.00 Nos.

minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

118 6.00 Supply and Planting of best quality saplings of Sissam (Indian rosewood) Dalbergia sissoo having 450.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

119 8.00 Supply and Planting of best quality saplings of Agar wood (Krishna guru ) Aquilaria agallocha 600.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

120 12.00 Supply and Planting of best quality saplings of Krishna kamal (Passion fruit) Passiflora edulis 50.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched,

well established & free from disease at site as per the instructions.

121 23.00 Supply and Planting of best quality saplings of Thippali (Long pepper) Piper longum having 300.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

122 4.00 Supply and Planting of best quality saplings of Bamboo Dendrocalamus strictus having height of 450.00 Nos.

minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

123 4.00 Supply and Planting of best quality saplings of BambooBambusa arundinaceae having height of 300.00 Nos.

minimum 2 Inch, well branched, well established & free from disease at site as per the

124 4.00 Supply and Planting of best quality saplings of Babul (Gum arabic tree)Vachellia nilotica having 600.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

125 3.00 Supply and Planting of best quality saplings of Peepal (Sacred fig) Ficus religiosa having height of 450.00 Nos.

minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

126 6.00 Supply and Planting of best quality saplings of Nagkesar (Indian rose chestnut) Messua ferrea 650.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched,

well established & free from disease at site as per the instructions.

127 2.00 Supply and Planting of best quality saplings of Vata vruksh (Banyan tree) Ficus bengalensis having 1000.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

128 4.00 Supply and Planting of best quality saplings of Palash (Flame of forest) Butea monospema having 350.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

129 12.00 Supply and Planting of best quality saplings of Sita Ashok (Ashoka tree) Saraca asoka having 850.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

130 4.00 Supply and Planting of best quality saplings of Payar Peepal (Golden rumph’s fig) Ficus rumphii 900.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

131 6.00 Supply and Planting of best quality saplings of Paras Peepal (Portia tree) Thespesia populnea 450.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

132 3.00 Supply and Planting of best quality saplings of Pakur (White fig) Ficus infectoria having height of 550.00 Nos.

minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

133 6.00 Supply and Planting of best quality saplings of Shami (Spunge tree) Prosopis cineraria having 550.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

134 16.00 Supply and Planting of best quality saplings of Chameli (Jasmine) Jasminum grandiflorum having 550.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

135 80.00 Supply and Planting of best quality saplings of Ambada (Wild mango) Spondia magifera having 600.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

136 5.00 Supply and Planting of best quality saplings of Bael (Stone apple tree) Aegle marmelos having 600.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

137 4.00 Supply and Planting of best quality saplings of Arjun (Arjun tree) Terminalia arjuna having height 550.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

138 16.00 Supply and Planting of best quality saplings of Viklo (Red spike thorn) Mytenus emarginata having 550.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

139 12.00 Supply and Planting of best quality saplings of Parijat (Night Jasmine) Nyctanthes arbour-tristis 500.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

140 8.00 Supply and Planting of best quality saplings of Nagkesar (Indian Rose Chestnut) Messua ferrea 750.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

141 5.00 Supply and Planting of best quality saplings of Champhar (Governor’s plum) Flacourtia montana 750.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched,

well established & free from disease at site as per the instructions.

142 5.00 Supply and Planting of best quality saplings of Dadhiphal (Elephant apple ) Limonium 750.00 Nos.

acidissimum having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well

branched, well established & free from disease at site as per the instructions.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

143 8.00 Supply and Planting of best quality saplings of Bakul (Bullet wood) Mimusops elenjii having 450.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

144 8.00 Supply and Planting of best quality saplings of Nagkesar (Indian rose Chestnut) Messua ferrea 300.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

145 3.00 Supply and Planting of best quality saplings of Shimalo (Red silk cotton tree) Bombax 300.00 Nos.

malabaricum having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well

branched, well established & free from disease at site as per the instructions.

146 8.00 Supply and Planting of best quality saplings of Kate savar (Red cotton tree) Bombax ceiba having 600.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

147 3.00 Supply and Planting of best quality saplings of Neem (Margosa tree) Azadirachta indica having 450.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

148 5.00 Supply and Planting of best quality saplings of Garmalo (Indian laburnum tree) Cassia fistula 400.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

149 3.00 Supply and Planting of best quality saplings of Raal (White damar) Vateria indica having height 800.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

150 5.00 Supply and Planting of best quality saplings of Bael (Stone apple tree) Aegle marmelos having 500.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

151 10.00 Supply and Planting of best quality saplings of Vet (Rattan cane) Calamus rotang having height 500.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

152 12.00 Supply and Planting of best quality saplings of Sita ashok (Ashoka tree) Saraca indica having 800.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

153 3.00 Supply and Planting of best quality saplings of Panas (Jack fruit tree) Artocarpus heterophyllus 800.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched,

well established & free from disease at site as per the instructions.

154 15.00 Supply and Planting of best quality saplings of rui ( milk weed ) Calotropis gigantea having 800.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

155 4.00 Supply and Planting of best quality saplings of Nariyal (Coconut tree) Cocos nucifera having 1000.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Qnt. Item Discripation Rate Unit Amount

156 12.00 Supply and Planting of best quality saplings of Sita ashok (Ashoka tree) Saraca ashoka having 850.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

157 6.00 Supply and Planting of best quality saplings Shami (Spunge tree) Prosopis cineraria having height 800.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

158 4.00 Supply and Planting of best quality saplings of Nariyal (Coconut tree) Cocos nucifera having 800.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

159 5.00 Supply and Planting of best quality saplings of Kadamb (Burflower tree) Mitragyana parvifolia 800.00 Nos.

(Anthocephalus kadamba) having height of minimum 8 to 10 ft. and bag size is 21 inch x

21 inch, well branched, well established & free from disease at site as per the instructions.

160 3.00 Supply and Planting of best quality saplings Aam (Mango tree) Mangifera indica having height of 600.00 Nos.

minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

161 5.00 Supply and Planting of best quality saplings Neem (Margosa tree) Azadirachta indica having 450.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

162 5.00 Supply and Planting of best quality saplings of Aam (Mango tree) Mangifera indica having height 600.00 Nos.

of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well established &

free from disease at site as per the instructions.

163 5.00 Supply and Planting of best quality saplings of Neem (Margosa tree) Azadirachta indica having 450.00 Nos.

height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched, well

established & free from disease at site as per the instructions.

164 12.00 Supply and Planting of best quality saplings of Mahua (Indian butter tree) Madhuca indica 700.00 Nos.

having height of minimum 8 to 10 ft. and bag size is 21 inch x 21 inch, well branched,

well established & free from disease at site as per the instructions.

165 10000.00 Overall Maintenance of garden including replacement of plants, watering, cleaning, Gardening etc. 675.00 sqm

complete for entire premises for one year (The time shall be start after official handling over of the

garden)Maintenance of Green Area Complete maintenance of green area including plants with

water for 36 months including weeding, hoeing, watering, pruning application of good earth,

manure, insecticides, fungicides & fertilizers, security of plants disposal of garden rubbish from the

premises to be approved municipal dumping ground replacing casualty of plants(occurred due to

any reason) by healthy plants. All the material, manpower and equipments required for

maintenance shall be arranged by the contractor and water shall be provided by the department

(cost of material including in the item) and water shall be provided by the department. The

maintenance period will start after 45 days from the 100% work completion including necessary

civil, plumbing, irrigation and electrical work. Minimum One person required at every 1500 sqmt.

AHMEDABAD MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Item Description Final Rate Labour include Unit Amount

cess Labour cess

165 Supply, Installation, assembling, connection, testing and commissioning of External Lighting Panel.

2.00 ELW 02.00 Distribution Board 3,379.00 33.79 3,412.79 Nos.

Distribution Board

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

166 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door

4.00 Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated 522.00 5.22 527.22 Nos.

167 powder coated sheet steel enclosure erected as directed with connection.

[A] Metal Clad Socket with metal clad top

4.00 Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated 654.00 6.54 660.54 Nos.

168 powder coated sheet steel enclosure erected as directed with connection.

[B] 15 Amp. / 5 Amp. Five pin Universal Socket

16.00 MCB 's and its Accessories 111.00 1.11 112.11 Nos.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system

169 and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

2.00 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device 1,925.00 19.25 1,944.25 Nos.

having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

170 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected

including all materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase

2.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & 860.00 8.60 868.60 Nos.

171 confirms to IS :8828 in existing box having following capacity

4.00 Caution Board : 69.00 0.69 69.69 Nos.

172 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-2551.

75.00 ELW 03.00 MV Cabling 215.00 2.15 217.15 Meter

173 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

820.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. 123.00 1.23 124.23 Meter

to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(B) 4 core 6 Sq. mm

1,350.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. 128.00 1.28 129.28 Meter

175 to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(B) 4 core 4 Sq. mm

1,850.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be 104.00 1.04 105.04 Meter

176 laid on wall with necessary clamps or in existing trench / pipe of following size of cables.

(C) 3 core 6 Sq. mm

6.00 ELW 04.00 Cable Termination 20.00 0.20 20.20 Nos.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

177 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved

1.00 Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC 75.00 0.75 75.75 Nos.

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

112.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable 38.00 0.38 38.38 Nos.

179 complete with out going tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

305.00 Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high 8.00 0.08 8.08 Nos.

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

AHMEDABAD MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Item Description Final Rate Labour include Unit Amount

cess Labour cess

ELW 7.00 Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted

30.00 a) For Electrical Installation up to 440V in normal soil 4,973.00 49.73 5,022.73 Kg

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

5.00 c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive 9,413.00 94.13 9,507.13 Kg

Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

160.00 Earth wire/strips : 787.00 7.87 794.87 Kg

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

25 x 3 mm/ 32X6mm / 50x6mm CU. strip/ 38x6 Cu earth link

183 25.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787.00 7.87 794.87 Kg

650.00 ELW 8.00 Miscellaneous 136.00 1.36 137.36 Rmt

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

184 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable.

below ground / road surface for enclosing cable

(D)120 mm outer dia.

2,000.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 62.00 0.62 62.62 Rmt

II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable.

185 below ground / road surface for enclosing cable

(A)50 mm outer dia

ELW 9.00 External Lighiting

Supply of approved make GRP Pole having following specifications:GRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should

be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well

as non conductive & shock proof Pole should be provided with GRP Anchor Base and it should be heavy duty, or

MS Material duly painted with Epoxy paint.Pole should be flame retardant as per IS 6746. Resin used shall be UV

186 resistance and pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness shall be

to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole

should be generally made as per the dimensional data, performance criteria and some interchangeability features

of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with

necessary accessories . The size of pole and type of installation with foundation as per manufacturer details and

site requirement are as Below .

75.00 SITC of 4.0 mtr height GRP pole of Average Thickness: 7mm.Top/ Bottom OD Dia A/F 89/145 mm ± 2mm 9,696.00 96.96 9,792.96 nos.

187 approx.with PU Paint Approx. Weight of Pole 19 kg approx. (Without Base)Anchor Base (Size 250X250 & 12mm

10.00 SITC of 7.0 mtr height GRP pole Average Thickness: 7.5mm. Top/ Bottom OD Dia A/F89/183 mm ± 2mm approx. 15,984.00 159.84 16,143.84 nos.

a approx.with PU Paint Weight of Pole 40 kg approx. (Without Base) Anchor Base (Size 300X300

& 18mm Thickness)

Providing GRP arm bracket of having 15˚ arm with suitable size of pole OD pipe *5 mm thk,1000mm long from

c 10.00 (B) Double arm bracket 2,390.00 23.90 2,413.90 nos.

20.00 SITC of new LED light fixtures having Luminaire Efficacy≥115Lumens per wattwith maximum 60w as per Tender 5,247.00 52.47 5,299.47 nos.

188 termsConditions, Specifications and Following items. (With CCT 3000 / 4000K ± 10 %)

Supply, Installation, Testing & Commissioning of New LED Light fixtures with maximum 60w LED Fitting with 3 core

x 1.0 Sq. mm Copper flexible Cable of required length from Junction Box to fixtures, & with needed all electrical

mechanical accessories to Commission the Streetlight poles as per tender terms, conditions & Specifications &

75.00 SITC of Post Top Lantern LED fitting having Luminaire Efficacy≥100 Lumens per watt comprises of finish cast 4,772.00 47.72 4,819.72 nos.

190 aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block. IP 66 (With CCT 3000 / 4000K ± 10 %)

AHMEDABAD MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Item Description Final Rate Labour include Unit Amount

cess Labour cess

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /Solid Aluminium conductor for 1.1 KV.

191 to be laid on wall with necessary clamps or in existing trench / pipe of following size of

2500 Making trench in soft soil of suitable width of 90 cms deep from the final ground level or 46 0.46 46.46 Mt

road level for laying cable or locating the fault all over the run and backfilling the same & clearing the site by

192 removing debris & Shifting of the debris & making site good As per theInstruction of the Engineer Incharge.

800 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for 62 0.62 62.62 Mt

193 laying any size of cable or locating the fault all over the run and back filling the same and

making the surface as normal ground.

194 120 (B) If additional machinery like hammer driller or JCB use [Add] 295 2.95 297.95 Mt

100 Driling the road without breaking the road surface (Asphalt) for laying of cable for feeding 407 4.07 411.07 Mt

195 power supply by making Suitable size of holes at both ends complete.

(A) Up to 100 mm bore dia

360 STREETLIGHT POLE WIRE 38.41 0.38 38.79 Mt

Supply and Installation of 3.0 core x 1.0 Sq. mm Flexible Copper wire with required length

196 from Junction Box to Fixture, with needed all electrical mechanical accessories and tools to

Commission the Streetlight poles as per tender terms, conditions & Specifications.

FEEDER SECTION PILLAR TYPE-B -1 30602.54 306.03 30,908.57 Nos.

Supply, installation, Testing and commissioning of the Feeder Section Pillars

as per specifications, IS and Drawings.

The unit rate for each item shall include :Call for final inspection prior to dispatch. Delivery of the fidder pillar /

section pillar tosite. Shifting of the fidder / section piller from site to store to the suitable location. Shifting & Fixing

of Section Pillar. Assembly and wiringof component supplied separately. Installation of section piller to including

oldsection pillar. Earthing all components, frame etc. to a common internal earth bar.M.S. Parts should painted

with powder coating. Supply & fixing all accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x

channels for fixing the panels. Connection, testing and commissioning. Checking of internal connection and wiring,

operation of switches, starter, MCCB, relays, contactors etc.Supply of neccessary tools, hardware, testing

equipment etc. Electrical contractor shall carry out the insulation test at site and all the readings shall be

submitted in duplicate to theconsultant or engineer-in- charge. Approval from state Electricity Board &Liason work

20 Supply, Installation, Testing & Commissioning of high-performance LED luminaires featuring a compact cylindrical 5686.75 56.87 5,743.62 Nos.

design with integrated heat sinks and steel bracket mounting. These luminaires offer versatile color options

including white, monochromatic, RGB, RGBW, and tunable white, and provide beam angles ranging from 3.5° to

60° for varied lighting effects. Controlled via DMX512/RDM protocols, they ensure precise lighting adjustments.

With an IP66 rating, they are suitable for outdoor applications such as façades, bridges, landmarks, landscapes,

parks, and plazas. Available in flexible lengths from 155 mm to 569 mm, the system allows adjustable tilting angles

for both individual heads and the entire assembly, enhancing directional flexibility.

30 Supply, Installation, Testing & Commissioning of 16mmX16mm of 5 meters length 3000K Flexible strip led light 4628.75 46.29 4,675.04 Nos.

with Non- Integral driver.The luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade

appearance, soft bend flexibility & Option of Top bend , the same shall be so designed with completely made in

India luminaire. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP67

protection. No need external decoder.The LEDs shall have minimum CRI ≥80 (White Light)& shall have SDCM≤5.

The luminaire shall have system wattage of 14 Watt/meter and shall deliver 714 lumens. Fixture shall operating

temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for 220-240 VAC,

50/60Hz. The luminaire shall have declared life of 50,000 burning hours. Luminaire manufacturer must have In-

house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate

for Luminaire manufacturer along with technical bid. Bidder shall submit the following reports along with technical

bid LM79 report of the family of luminaire issued by NABL accredited lab, LM80 issued by LED manufacturer BIS

certificate for LED Luminaire. Brand name shall be embossed / printed on each an every light fixtures.

100 LED UPLIGHT: 3967.5 39.68 4,007.18 Nos.

8W, High efficient LED with Aluminium housing with Clear Toughened Glass with Reflector.CRI>70, IP67, CCT -

200 2700K, Ambient temp-0 to 45 DegC, 50000 burning at L70 criteria Driver efficiency>85%,THD<25%,

Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current driver with 150 - 270 voltage

range. Luminaire lumen ≥ 600 lumens (75 lm/W).

AHMEDABAD MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Sr. No. Item Description Final Rate Labour include Unit Amount

cess Labour cess

30 Supply, Installation, Testing & Commissioning of 2 X 6W, Wall Up - Down Light 3000K with Integral driver & 4496.5 44.97 4,541.47 Nos.

completely made in India luminaire. The luminaire’s shall be made of Die cast aluminum with Pure polyester

powder coated housing. Optical compartment is sealed with toughened glass using Silicon gasket ensuring IP65 &

IK06 protection and lifelong performance.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5.

The luminaire shall have wattage 2 X 12W and shall deliver 2 X 570 lumens. Beam angle of the Luminaire shall be

60 deg. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 140 - 280V AC. 2 stage

201 Constant current driver with Inbuilt 3kV surge protection. The luminaire shall have declared life of 50,000 burning

hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-

house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate

for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light

fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.

160.00 Bollards (a) LED Bollard fittings of minimum height 400 mm & dia.100mm having polycarbonate clear/milky 2,058.00 20.58 2,078.58 NOS.

diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with

erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv

6.00 Getting GEB/TORRENT CONNECTION Liasing Charges 15,000.00 150.00 15,150.00 NOS.

AHMEDABA+A1:I20D MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Total 1% Labour Rate include

Sr. No. Item Description Final Rate Unit Amount

Qty. cess Labour cess

1.00 SPN Distribution Board : 1,478.00 14.78 1,492.78 Nos.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

204 of same company of MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

205 4.00 Half / One Module Blanking Plate of Standard Size. 9.00 0.09 9.09 Nos.

18.00 ELW 5.00 Internal Wiring 445.00 4.45 449.45 Nos.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

4.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected 239.00 2.39 241.39 Nos.

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling with following type

40.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 78.00 0.78 78.78 Nos.

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

208 colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm

2.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 469.00 4.69 473.69 Nos.

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

209 wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

4.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 691.00 6.91 697.91 Nos.

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

210 wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

4.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected 239.00 2.39 241.39 Nos.

on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

211 metallic/white front plate modules erected on / in wall / ceiling with following type

accessories for Exhaust.

10.00 ELW 6.00 Light Fixtures and Fans 584.00 5.84 589.84 Nos.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

212 Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

AHMEDABA+A1:I20D MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Total 1% Labour Rate include

Sr. No. Item Description Final Rate Unit Amount

Qty. cess Labour cess

8.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 423.00 4.23 427.23 Nos.

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

55.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 568.00 5.68 573.68 Nos.

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

214 Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(G) Step Light having Aluminium die cast and ABS Plastic material.

(i) 5 watts, Direct/Indirect luminaire

5.00 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling 2,857.00 28.57 2,885.57 Nos.

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

215 with remote unit for Speed Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

4.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 370.00 3.70 373.70 Nos.

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

216 ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

2.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod 107.00 1.07 108.07 Rmt.

217 erected duly painted for fan complete with proper insulation without leakage and earthing.

4.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame 1,687.00 16.87 1,703.87 Nos.

218 ABS body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

2.00 Supplying & erecting single phase approved make industrial exhaust fan suitable for 2,713.00 27.13 2,740.13 Nos.

medium duty ring mounted low noise operation suitable for medium duty having following

dia size and maximum speed in RPM

(B)380 mm dai 900 RPM (CAT-2)

220 3.00 SITC of suitable M.S. louver shutter of the Exhaust fan. 365.00 3.65 368.65 Nos.

1.00 Providing and supplying of openwell pump available in 3 HP and 5 HP capacities with a 3- 26,348.00 263.48 26,611.48 Nos.

phase power supply. The 3 HP pump delivers a flow of 7 liters per second, while the 5 HP

221 pump delivers 13 liters per second, both with a head of up to 25 meters. The pumps

feature CUD anti-rust coating and have inlet/outlet sizes of 65x50 mm and 50x50 mm.

intended for garden use.

AHMEDABA+A1:I20D MUNICIPAL CORPORATION

ELECTRIC DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

Total 1% Labour Rate include

Sr. No. Item Description Final Rate Unit Amount

Qty. cess Labour cess

2.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI 623.00 6.23 629.23 Nos.

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

AHMEDABAD MUNICIPAL CORPORATION

GARDEN DEPARTMENT

North West Zone, Ward - (Chandlodia), F.P. No: 126,T.P Scheme No: 72 (Chandlodia) Ram Vatika Park, Ahmedabad

223 1.00 Bore well - 6''diameter pipe drilling with labour charge & pipe lowering depth

mtr.(HOLE SIZE18 ") (HSN : 995434) Inclusing following items : Gravel packing (HSN

Air compressor minimum 3 hrs. HSN : 995434) Top line lowering charge for air

compressor.(HSN : 995434) Cement celling charges (HSN : 995434) Electro logging

testing charges (HSN : 995434)6" Diameter pipe LCG JOHNSON TYPE APOLO

MAKE OR JOHNSON MAKE brand (HSN : 7306)6" Diameter pipe TATA MAKE C-

CLASS brand (HSN : 7306) 6" Dia Stainer 1/16 STAINER (HSN : 995434)6" DIA PIPE

FACING CHARGE(HSN : 995434) 1288000 Nos.

6" Diameter pipe support welding and fitting charges.(HSN : 995434)Charges for

carting bore pipe to site (HSN : 995434) Pipe truck loading and unloading charge

Charges for pipe double welding and fixing centre guide. (HSN: 995434)6" dia

bottom seal, clamp, top seal with boult.(HSN : 995434) Geohydrological

investing/Geophysical survey work by Scientist/Geologist.Labour charges for

packing mad surrounding bore well. Pits necessary for Drilling 2 NOS. Water tanker

required for drilling water tanker Mud carting tanker charges. Charges for clay ball

per truck (HSN : 995434)