Modernisation of gynic block and adjoining emergency OT as per Laqshya at Government Medical College Kollam

Amount

CIVIL WORKS

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

6.3.2 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks

5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

od118042/2018_2019 : Providing and fixing Hydraulic door closer bottle type M.S. body with necessary accessories and screws etc complete

9.95.3 : Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

9.123 : Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

9.124.1 : Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest availablesize confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in:CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

13.5.1 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1cement: 4 coarse sand)

9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete.150x10 mm

8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade,Area of slab over 0.50 sqm

PLUMBING WORKS

17.3.2 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.c. pan with ISI marked black solid plastic seat and lid

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.32.1 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms

18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore

18.16.1 : Providing and fixing brass stop cock of approved quality :15 mm nominal bore

17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.

50.18.9.12.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall

50.18.9.14.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall

50.18.9.16.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

od118923/2018_2019 : Providing and fixing 150mm silt with CP gratings

od118924/2018_2019 : Providing,Fixing,Supplying,Installation and Commissioning of 3-Bay(2100 mm long)brush finish scrub station(manual operated)made out of high grade SS 304 1.60mm thick complete with all accessories ie thermostatic mixing valve & bypass system etc

15.52 : Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

17.11.1 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm

ELECTRICAL WORKS

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.

90.11.1.21 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire

1.14.6 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire

2.12.2 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.3 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing 6 A to 32 A ratings, SP MCB, and other accessories

Supplying and fixing 1 feet x 1 feet sq. type double pin type LED (24 Watts) mirror optics and all other accessories etc., complete

Supplying, installation, testing and commissioning of 2 tonne invertor split AC with 5KVA voltage stabiliser and other accessories( blue star or voltas)

Supplyig and fixing GI stand for supporting compressor unit of split AC

Providing additional copper piping for erection of AC unit

Supplying and fixing labour room spot light(Single LED) and all other accessories etc., complete

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp

2.5.1 Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

Supplying and fixing following 20 amps modular DP switch and other accessories etc complete

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.2 X 25 sq. mm (22mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required 2 X 16 sq. mm (22mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2 X 4 sq. mm

Engaging labour for dismantling the existing electrical circuits and fittings etc complete

Supplying and fixing 600mmx600mm ceiling light and other accessories

MEDICAL EQUIPMENTS

Supplying BPL Ultima prime multi para monitor with 12.1 inch TFT high resolution color display etc complete

Technocare Medisysteam Color Display Table Top Pulse Oximeter with Nibp tm-5100, For Hospital, cms-5100

Allied Meditec Anaesthesia Workstation Jupiter Extended Platform for 2 B-Type Bulk Cylinders, 1 Large Spacious Drawer Unit

AHU And Aircondition System

Supply,Errection,Testing and Commissioning of Double Skinned Floor Mounted/ Ceiling Suspended Air Handling Units as per specification complete with minimum 40mm thick panel with minimum 0.8mm thick GI sheet fo routers kin and minimum 0.63mm thick AL sheet for inner skin.All the panel shall in corporate with 40kg/m3 PUF insulations and wiched in between inner and outer skin along with Fan section with Plug Fans, suitable rated TEFC motor with necessary drive arrangements with VFD, Coil section with 6 Rowdeep DX cooling coil with insulated SS drain pan,Filter section with 10 micron prefilters and 5 micron Fine filters,Mixing Box section with FA and RAD amper and all other standard accessories including all necessary supports (Make : VTS/FINPOWER/EDGETECH)

Supply Installation, Testing & Commissioning of factory assembled DX type Condensing Units (Out door units only) operating on R 134a / R 410A/R 407C complete as specified and comprising of Hermetically Sealed energy efficient Scroll compressors as specified operating on Air Cooled Condenser with low noise fans and corrosion resistant fins ( blue fins/equivalent) Micro processor based control centre with all necessary controls and protective devices , thermal protection for compressor etc Unit casings shall be of GSS construction with powder coated finish Necessary mounting arrangements for out door units with suitable vibration isolators. (Make :DAIKIN/ BLUE STAR/ HITACHI)

Supply, Installation, Testing and Commissioning of Insulated refrigerant piping out of refrigerant grade hard drawn copper pipes duly insulated with 19/13 mm nitrile rubber pipe sleeves, finished with Cloth foster coating to the insulation manufacturer recommendations .(Make : TOTALINE/MANDEV/MEXFLOW)

Supply, Installation, Testing & Commissioning of Factory/Machine Made Sheet metal ducting work complete with all fittings such as Tee, Bends, Turning vanes including, suspension and supporting arrangement as required and necessary joints sealed with silicon<br>ALUMINIUM 20 G

Supply, Installation, Testing & Commissioning of Factory/Machine Made Sheet metal ducting work complete with all fittings such as Tee, Bends, Turning vanes including, suspension and supporting arrangement as required and necessary joints sealed with silicon ALUMINIUM 22 G

Thermal Insulation of ducts using Closed Cell Antimicrobial Class O Nitrile Rubber of following thickness with recommend Adhesives and sealed with black adhesive tape (Make : ALP ARMA FLEX,KFLEX) 13 mm

Powder coated extruded Aluminium Supply air Grilles with horizontal fixed bars and end flanges complete without Aluminium collar dampers.(Make : AIR MASTER / COSMIC/CARYAIRE)

Fresh Air Louvres with bird screen and volume control damper as required

Extract Air arrangements with Louvers, back draft dampers and VCD's

Extruded Aluminium Volume Control Dampers complete with flanges, channels and control levers suitable for duct mounting.<br>(Make : AIRMASTER/COSMIC/CARYAIRE)<br>

SITC of electric strip heaters complete with necessary fixing arrangements including<br>thermostats, humidistat and safety thermostat including power and control wiring

Supply, fabrication, installation, testing of flexible connections made out of fire resistant flexible double canvas sleeve.

Supply, Laying and Fixing of Power and Control cabling between indoor and outdoor units with required specification

Supply, installation, testing and commissioning Rigid PVC drain piping exposed with 9mm Nitrile rubber insulation.

Supply, Installation Testing and Commissioning of Inline Duct Fan of required cfm with speed regulator

Refrigerant gas (R 410)

MEDICAL GAS PIPELINE SYSTEM WORK

Fully Automatic Oxygen Control System : Supply, Installation testing and commissioning of Fully Automatic Oxygen Control System

Oxygen Manifold (10 +10) : Supply, Installation, testing and commissioning of (10 + 10 size) class D cylinder Oxygen Supply System

Emergency Oxygen Supply System : Supply, Installation, testing and commissioning of (2x5 size) class D cylinder Emergency Oxygen Supply System

Oxygen Flow meter with Humidifier Bottle: Supply installation, testing and commissioning of oxygen flow meter with humidifier bottle 0-15Litres

Fully Automatic Manifold Control Panel for Nitrous Oxide: Supply installation testing and commission of fully automatic control panel for Nitrous Oxide as per HTM 02-01/NFPA 99 C standards.

Nitrous Oxide Manifold System, (4 + 4 size): Supply installation testing and commissioning of (4 + 4 size) class D cylinder Nitrous Oxide Manifold system

Emergency Nitrous Oxide Manifold System, 2x2 size: Supply installation, testing and commissioning of (2x2 size) cylinder Emergency Nitrous Oxide supply System

Ward Vacuum Unit: Suply installation testing and commissiong of Ward Vacuum Unit as per tender technical specifications.

Theater Vaccum Unit for Operation Theaters: Supply installation testing and commissioning of Theater Vacuum Unit as per tender technical specifications.

Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications<br>42mm OD X 1.2mm thick

Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications<br>35mm OD X 1.2mm thick

Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications<br>28mm OD X 1 mm thick

Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications<br>22mm OD X 1 mm thick

Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications<br>15mm OD X 1 mm thick

Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and degreased copper pipes as per tender technical specifications 12mm OD X 1 mm thick

AREA VALVE BOX : Supply,Installation, testing and commissioning of Area Valve Boxes<br>Valve Box - 2 Gas Service with NIST Connection

MEDICAL GAS ALARM PANEL : Supply, Installation, testing and commissioning of Medical Gas Alarm Panel<br>Medical Gas Area Alarm for 2 services (Oxygen, and Vacuum)

MEDICAL GAS ALARM PANEL : Supply, Installation, testing and commissioning of Medical Gas Alarm Panel.<br>Master Alarm Panel

Supplying LINE ISOLATION VALVES<br>15 mm ball valve

Supplying Bed Head Horizontal Wall Panel outlet provison

RAJAN N (MAHALEKSHMI CONSTRUCTIONS)