WATER SUPPLY

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa 100 MM DI Valves

150 MM DI Valves

Manufacture, Supply, & Delivery of HDPE (PE -100 Grade) fittings 3 conforming to IS 4984 2016 including transportation to anywhere in A.P. Excluding all taxes MS Flanges - OD 160mm

Pipe Ends Long Neck - OD 110mm

Supply, laying and jointing of C.I.D Joints complete with rubber rings including filling with water, including cost of jointing Material etc., complete. 100mm - Class -10

100mm - Class - 15

200mm - Class -10

150mm - Class - 15

150mm - Class - 10

125mm - Class - 10

Supply, manufacture, and delivery of brass check nuts and steel rods produced through approved foundry processes, including casting, machining, threading (if required), finishing, and inspection, complete as per specifications. 8" Check Nuts Roads

6" Check Nuts Roads

4" Check Nuts Roads

Manufacture, Supply and delivery of C.I Pipes and Specials conforming to I.S.No. 7181/1986, 5531/1988, 3950/1979 at site of work anywhere in 6 A.P including loading, unloading, transportation to site of work staking at site transit risk and package, excluding Taxes - 1 Tail Piece 4-inch & Tail Piece 6-inch

Providing and supplying for for dewatering and leak rectification works Purpous portable petrol-driven water pump set of 2 HP capacity, powered by air-cooled, 4-stroke O.H.V engine with 79.7 cc displacement. The pump shall be of cast iron construction with 50 mm (2-inch) suction and delivery ports, capable of delivering a maximum flow rate of 520 litres per minute and a maximum head of 16 metres. The unit shall have a fuel tank capacity of 2 litres and operating speed of 3600 rpm including Fitting, along with required bolts, nuts, and complete in all respects, compatible with the pump set. As Per Local Quatation

2" PVC Hose Sectin Pipe