GENERAL PWD REST HOUSE THRITHALA UPGRADATION FOR PROMOTING TOURISM General Civil Work

Amount

DISMANTLING

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

OD55136/2021-2022:DismantIing of water and waste water lines of any diameter including all accessories and stacking as per the direction of Engineer in charge

OD55137/2021-2022:DismantIing and removing all sanitary and plumbing fittings of existing toilet such as wash basin, closet, taps, shower arms, health faucet, angle clock etc., including disposal of all debris in convenient places as pointed out by the Engineer in charge and cutting and removing all projected parts of existing pipes and fittings etc. and making all the surfaces ready for fixing new fittings to wall tile etc.

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

OD172327/2023-2024:Engaging coolie

REPAIRWORKS

50.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.70:Melamine polishing on wood work ( one or more coat)

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

OD79628/2022-2023:Providing and laying Vitrified wall tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm excluding grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

OD79629/2022-2023:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm excluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.

11.48.2:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

22.19.1:Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufactured of density at 250C, 0.87-0.89 kg /litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 230C as 350/ 300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 1500C. Cold fexibility shall be upto -20C when tested in accordance with ASTM. D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick

4.10:Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III) : 4 graded stone aggregate 12.5 mm nominal size).

8.6:Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

14.6.1:Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

OD79709/2022-2023:Re roofing with departmental pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49:Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD171850/2023-2024:Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm.

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.5.1.2:Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters

9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

9.7.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Float glass panes4 mm thick glass pane

9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

9.74.1:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

14.35.2:Providing and fixing finished brass hard drawn hooks and eyes:250 mm

LANDSCAPPING

OD171598/2023-2024:Dry rubble masonry with hard stone in foundation and plinth excluding leveling with cement concrete 1:6:12 (1 cement :6 course sand :12 stone aggregate 20 mm nominal size) up to plinth level

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.6.7.2:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

OD171705/2023-2024:Providing and laying 60mm natural stone (cube stone 100mm X 100mm) paver block of approved size, design & shape, laid in natural color and pattern over and including 50mm thick compacted bed of 6mm course aggregate, all complete as per the direction of Engineer -in-charge. cube stone 100mm X 100mm

OD42670/2022-2023:Providing and fixing Braille board of size 400x100mm, 1.5mm thick 304 grade Stainless steel material, with engraved letters and having braille signs all complete as per the direction of Engineer in Charge.

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

OD42671/2022-2023:Providing and laying 60 mm Bangalore Stone paver block of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm coarse aggregate, all complete as per the direction of Engineer-in-charge.

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

OD79646/2022-2023:Providing and laying 35 mm thick artificial grass, including finishing smooth etc. all complete as per direction of Engineer-in-charge.

8.2.2.1:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm

8.2.1.1:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/Zebra black marbleArea of slab upto 0.50 sqm

8.3.2:Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

13.33.2:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD171756/2023-2024:Providing & fixing Poly carbonate solid sheet 2 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.

OD42673/2022-2023:Providing and stacking of of approved plants and tress in approved places in Earthen pots / Plastic pots & as per direction of the officer-in-charge.

30.2.4.3:Screened through sieve of I.S. designation 4.75 mm

OD170347/2023-2024:Grassing with Buffalo grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).With grass Turf

30.2.14.3:Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep

30.2.25:Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).

30.2.6:Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

30.2.30.1:Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required frame work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-chargeTop inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm

30.2.50:Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

30.2.57.3:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Hedge plants (for 300 nos.=427.45/300)

OD169396/2023-2024:Plantation of Phoenix Palm plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169397/2023-2024:Plantation of Canna variegated plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169398/2023-2024:Plantation of Heliconia psittacorum plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169399/2023-2024:Plantation of Hymenocallis Littoralis plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169400/2023-2024:Plantation of Fern/Lutea plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169401/2023-2024:Plantation of Dracaena reflexa plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169402/2023-2024:Plantation of Aralia plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169403/2023-2024:Plantation of Heliconia rostrata plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169404/2023-2024:Plantation of Rhapis excelsa plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169405/2023-2024:Plantation of Vulgaris bamboo plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169406/2023-2024:Plantation of Chlorophytum plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169407/2023-2024:Plantation of Bambusa ventricosa plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169408/2023-2024:Plantation of Jacaranda mimosifolia plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169409/2023-2024:Plantation of Alocasia macrorrhizos plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169410/2023-2024:Plantation of Plumeria alba plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169411/2023-2024:Plantation of Calathea lutea plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169412/2023-2024:Plantation of Ujiniya plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169413/2023-2024:Plantation of Wodyetia bifurcata plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169414/2023-2024:Plantation of Alamanda rubra plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169415/2023-2024:Plantation of Ivy plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169416/2023-2024:Plantation of Rhapis excelsa plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169417/2023-2024:Plantation of Luecophylum frutescens plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169418/2023-2024:Plantation of Lantana camera plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169423/2023-2024:Plantation of Malpighia ball plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

OD169424/2023-2024:Plantation of Mansoa alliacea plant including watering and maintenance of the plant for 60 days or more till the plant forms a maturity, free from weeds and fit for mowing including supplying good earth, if needed (the manure and plant pot shall be paid for separately).

50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD79470/2022-2023:Providing and fixing White S Trap Floor Mounted water closet with UF soft close slim seat cover, hinges, accessories set of approved Brant equivalent of size 360x580x360mm or nearest available size, including all accessories such as Single Piece fiushing Cistern with Frame, Installation Kit and “S-Type” Drain Pipe Connectionand all other necessary accessories of approved make, complete including cutting and making good the walls as per the direction of Engineer in charge.

OD79471/2022-2023:Providing and fixing Overhead Shower 150X150mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System of Jaquar (Model No. OHS-CHR-1605)/ approved equivalent with Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange of Jaquar (Model No. SHA-455L400)/ approved equivalent, all complete as per the direction of Engineer in Charge. (DAR 18.22.2 Based)

OD79472/2022-2023:Providing and fixing Single Lever Basin Mixer without Pop-up Waste, with 450mm Long Braided Hoses of Jaquar (Model No. FLR 5025B)/ approved equivalent all complete as per the direction of Engineer in charge. (DAR 17.22B Based)

OD79473/2022-2023:Providing and fixing Stainless steel Anti-Cockroach Trap floor drain, including cost of cutting and making good the walls and floors. (DAR-17.60.1.1)

50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.21.2.1:Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal bore

50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

50.18.8.4.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2

50.18.9.4.2:Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2

50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2

50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow

50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.20.6:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

50.18.9.20.9:Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

50.18.9.22.9:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia offset

50.18.9.22.12:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

18.8.4:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

17.7B:Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

17.10.2.1:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board610x510 mm bowl depth 200 mm

OD157909/2023-2024:Providing and fixing PVC Septic Tank - 25 to below 35 flush capacity along with a precast cement concrete soak pit of 0.75 m diameter and 0.60 m in height, 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire of 5 cm thickness, complete, all as per the direction of Engineer in-charge.

OD170510/2023-2024:Providing & Installation of mini water filter system of Dimensions 52(L)X38(W)X24(H) on existing pipe line in 5-10 liter capacity and water flow rate is 10 LPH, Maximum pressure 1.1LPM.etc., and weight not less than 10kg, fixing at site complete with all operations including all necessary materials, labour, all complete as per the direction of Engineer-in charge.

OD170511/2023-2024:Providing & Installation of water treatment solution on existing pipe line in 50-180 liter capacity and water flow rate is 2000 LPH @0.50kg/CM, Maximum pressure 5kg/CM.etc., and weight not less than 200kg, fixing at site complete with all operations including all necessary materials, labour, all complete as per the direction of Engineer-in charge.

OD172173/2023-2024:Providing and fixing precast cement concrete soak pit of 1.00 m diameter and 1.00 m in height, 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete. 40 mm thick

FURNISHING

OD157910/2023-2024:Cot with head board - Supplying and fixing cot of size 210x100cm using second class teak wood legs of size 5x5cm and frame work of size 4x7.5cm including 9mm thick marineply wood of superior quality WBR/WBR made of gurgen wood with laminate finish over the frame work including all necessary bolt,nuts,screws,naiIs,and handle etc and the head board of available size as per the

OD157911/2023-2024:Supplying and providing single seated sopha of teak wood frame wherever required with superior quality fabric/rex in on back, seat and sides of approved make including 32 density 4 inch foam, 32 density 3 inch foam, 32 density 1 inch foam, cora cloth, nails, adhesives etc complete. The rate includes all material cost, labour, conveyance etc complete

OD157913/2023-2024:Stitching and fixing in to position i-lite curtains using aluminium curtain rod 20 mm dia 1.25 mm thick with brackets, i-lite rings of approved design on both side hydraulically pressed in to fabric (including blackout) including transportation, all material cost, stitching charges, labour charges, accessories etc. complete including the cost of Fabric. Area of opening is to be measured at site for payments.

OD157914/2023-2024:SuppIying duroflex/sleepwell or approved equivalent pocketed spring mattress with superior quality foam, fabric, spring with proper edge support, tempering, border etc with a minimum warranty of one year (190 x 90 x 15cm or nearest size to suite the Bed) as per the direction of Engineer in Charge.

OD157915/2023-2024:Good quality cotton pillow

P RASHEED

Bidder Name

P RASHEED

SIDDIKKUL AKBAR