Tender ID

Delhi

Financial Eval

Works

Civil Works

A/R and M/O Non-Residential Buildings at PWD Electrical Enquiry Office, Sunlight Colony and Circle Office, Sukhdev Vihar, under Sub-Div. -III, South-East (B) M PWD during 2026-27 (SH Repair and maintenance works).

Public Works Department

SUNLIGHT COLONY | South East Delhi, Delhi

Amount: ₹10.7 LCloses: 27 Apr 2026Closed

Timeline

Published20 Apr 2026
Closed27 Apr 2026
Technical Evaluation28 Apr 2026
Financial Evaluation28 Apr 2026
Award—

Bids

Percentage

3 Bids28 Apr 2026

#	Company	Amount	Rank	Status
1	Aftab Alam Ansari L1₹6.3 LAccepted-Finance	₹6.3 L	L1	Accepted-Finance L1
2	GLOBAL CONSTRUCTION CO. L2₹7.8 L+₹1.6 L (25.4%)Accepted-Finance 111 B L LANE BAKSARA HOWRAH	₹7.8 L+₹1.6 L (25.4%)	L2	Accepted-Finance L2
3	SHOBHIT KUMAR L3₹7.8 L+₹1.6 L (25.4%)Accepted-Finance	₹7.8 L+₹1.6 L (25.4%)	L3	Accepted-Finance L3

Tender Value

₹10.7 L

EMD Value

₹21,354

Closing Date

27 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

Executive Engineer South-East(Bldg)M, Hauz Khas, New Delhi-110016

Work Description

A/R and M/O Non-Residential Buildings at PWD Electrical Enquiry Office, Sunlight Colony and Circle Office, Sukhdev Vihar, under Sub-Div. -III, South-East (B) M PWD during 2026-27 (SH Repair and maintenance works).

Tender Information

Tender ID

2026_PWD_290059_1

Reference Number

03/South-East(B)M/New Delhi/2026-27.

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

30 days

Location

SUNLIGHT COLONY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredEarnest Money in the form of Insurance Surety Bonds, Account Payee Demand Draft, Fixed Deposit Recei (.pdf)

RequiredCPWD B and R category Registration Certificate Or A certificate of work experience issued by an offi (.pdf)

RequiredGST Registration Certificate if already obtained by the bidder (.pdf)

RequiredCopy of PAN Card issued by Income Tax Department. (.pdf)

RequiredCopy of applicable licenses/registration of Labour License with EPFO, ESIC. OR An undertaking (.pdf)

RequiredAn affidavit on non-judicial stamp paper of Rs. 100/- regarding debarment and blacklisting as per Fo (.pdf)

RequiredAn Affidavit on Non Judicial Stamp Paper of Rs. 100/- regarding back to back execution as per Form-F (.pdf)

RequiredBidders are required to upload the NIT in PDF as uploaded by EE (.pdf)

RequiredAddress for communication, Mobile cell number, e-mail address etc. duly signed. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹21,354

Important Dates

Last Activity

28 Apr 2026

Published

20 Apr 2026

Bid Opening

27 Apr 2026

Download Starts

20 Apr 2026

Download Ends

27 Apr 2026

Submission Starts

20 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (47 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.01	1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	8.55	cum	-	-
1.02	1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	24.03	cum	-	-
2Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
3.01	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	11.76	sqm	-	-
4	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).	11.76	sqm	-	-
5Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
6.01	250x16 mm	-	each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 8.84 MB

Work Item Documents

BOQ_385084.xls

BOQ • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Aftab Alam Ansari

L1₹6.3 LAccepted-Finance

GLOBAL CONSTRUCTION CO.

L2₹7.8 L+₹1.6 L (25.4%)Accepted-Finance

111 B L LANE BAKSARA HOWRAH

SHOBHIT KUMAR

L3₹7.8 L+₹1.6 L (25.4%)Accepted-Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.01	1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	8.55	cum	-	-
1.02	1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	24.03	cum	-	-
2Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
3.01	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	11.76	sqm	-	-
4	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).	11.76	sqm	-	-
5Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
6.01	250x16 mm	-	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1.01

1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

8.55

cum

1.02

1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

24.03

cum

2Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

3.01

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

11.76

sqm

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

11.76

sqm

5Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

6.01

250x16 mm

each