Construction of TRD maintenance depot, tower car shed, offices for staff to operate shed activities, meeting room, store room, vehicle parking at Nawa and miscellaneous building for Dedicated Test Track between GA-THMR section of Jodhpur division

A-CPWD DSR 2021 Items

B-NON SCHEDULE ITEMS

Item Breakup - A-CPWD DSR 2021 Items

during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 67 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 1488 294.85 438736.8 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 68 13.4.1 1:4 (1 cement: 4 coarse sand) Sqm 100 307.25 30725 15 mm cement plaster on rough side of 13.5 single or half brick wall of mix: 69 13.5.1 1:4 (1 cement: 4 coarse sand) Sqm 100 354.5 35450 CEMENT PLASTER WITH A FLOATING COAT 13.7S OF NEAT CEMENT 13.10 15 mm cement plaster 1:3 (1 cement: 3 Sqm 1488 436.3 649214.4 coarse sand) finished with a floating coat of 70 neat cement on the rough side of single or half brick wall. 13.11S CEMENT PLASTER IN TWO COATS DYCE-C-1/JP-ENGINEERING/NORTH WESTERN RLY 13.11 18 mm cement plaster in two coats under Sqm 2100 442.75 929775 layer 12 mm thick cement plaster 1:5 (1 71 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 13.33S POINTING ON STONE WORK Pointing on stone work with cement mortar 13.33 1:3 (1 cement : 3 fine sand) : 72 13.33.2 Raised and cut pointing Sqm 319 580.25 185099.75 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved 13.42 manufacturer, of required shade and colour complete, as per manufacturer's specification. 73 13.42.1 Two or more coats on new work Sqm 5075 92.75 470706.25 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 2125 166.85 354556.25 74 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Painting with black anti-corrosive bitumastic 13.65 paint of approved brand and manufacture to give an even shade : 75 13.65.1 Two or more coats on new work Sqm 500 115.1 57550 13.80 Providing and applying white cement based Sqm 5075 123.85 628538.75 putty of average thickness 1 mm, of 76 approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 14.0 REPAIRS TO BUILDING 14.75AS ROUTINE MAINTENANCE WORK Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25 degrees celsius, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital 14.90 physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23 degrees celsius as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150 degrees celsius. Cold flexibility shall be upto -2 degrees celsius when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 77 14.90.1 3 mm thick Sqm 525 534.1 280402.5 17.0 SANITARY INSTALLATIONS DYCE-C-1/JP-ENGINEERING/NORTH WESTERN RLY Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 5 5781.35 28906.75 78 of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush 17.2 pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 5 5540.55 27702.75 79 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size Each 10 1913.75 19137.5 80 630x450 mm with a single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 81 17.10.1.1 510x1040 mm bowl depth 250 mm Each 3 6008.45 18025.35 Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 82 17.28.2.1 32 mm dia Each 13 104.35 1356.55 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.4 including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. -Internal Exposed on walls 83 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 125 316.1 39512.5 84 18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 125 358.9 44862.5 DYCE-C-1/JP-ENGINEERING/NORTH WESTERN RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded 18.5 polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer- in-Charge. -Concealed work,including cutting chases and making good the wall etc. 85 18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 125 501.6 62700 86 18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 125 542.1 67762.5 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.6 including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. -External work 87 18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) Metre 375 654.65 245493.75 18.6A Providing and fixing PPR Unions 88 18.6A.2 PPR Union 25mm Each 125 362.65 45331.25 89 18.6A.3 PPR Union 32mm Each 125 416.15 52018.75 90 18.6A.6 PPR Union 63mm Each 125 951.35 118918.75 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 91 18.15.2 20 mm nominal bore Each 13 327.95 4263.35 Providing and fixing brass stop cock of 18.16 approved quality : 92 18.16.2 20 mm nominal bore Each 7 327.95 2295.65 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 93 18.17.1A 20 mm nominal bore Each 7 461.75 3232.25 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 94 18.18.2 20 mm nominal bore Each 7 397.45 2782.15 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 5000 9.7 48500 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 95 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 96 19.1.2 150 mm diameter Metre 220 591.4 130108 DYCE-C-1/JP-ENGINEERING/NORTH WESTERN RLY Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 97 19.3.2 150 mm diameter S.W. pipe Metre 220 689.75 151745 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 98 19.6.1 100 mm dia. R.C.C. pipe Metre 65 447.25 29071.25 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside 19.7 plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight 19.7.2 of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.7.2.1 With common burnt clay F.P.S. (non modular) Each 4 24405.9 97623.6 99 bricks of class designation 7.5 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : 19.33 Constructing soak pit 1.20x1.20x1.20 m filled Each 2 2940.2 5880.4 with brickbats including S.W. drain pipe 100 100 mm diameter and 1.20 m long complete as per standard design. 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : DYCE-C-1/JP-ENGINEERING/NORTH WESTERN RLY 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 375 466.3 174862.5 101 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 250 564.8 141200 102 thickness of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 25 1019.8 25495 103 (weight not less than 10kg/sqm) 21.17 Providing and fixing anodised aluminium grill Kg 125 560.85 70106.25 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws 104 @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). Total 80440129.95

Item Breakup - B-NON SCHEDULE ITEMS

(a) Size ½ Module ( 3x3)

(b) Size 3 Module ( 4x3)

(c ) Size4 Module ( 5x3)

(d ) Size 6 Module ( 8x3)

(e) Size 8 Module( 9x3) Total 120427.50 Supply and fixing of following sizes of heavy duty P.V.C. conduit ISI marked of make A.K.G. Polycab, Finolex, Erespoplast & Precision or equivalent make as approved by engineer in charge (IS: 9537 Item- 2 part III 1981 or latest edition) conforming along with the accessories recess (roof, wall, beam, columns, false ceiling etc.) or cutting of the wall and making good the same in case of recessed conduit. The thickness of conduit shall not be less than 1.6mm S No. Item No Description of Item Unit Qty Rate Amount

(a) 20mm diameter

(b) 25mm diameter Total 35987.00