Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC 1ST FLOOR SAKTHI BUILDING SOUTH OF STONE BRIDGE IRON BRIDGE 688011 | ALAPPUZHA | ALAPPUZHA | KERALA | 688011 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹3.8 L+₹11,479.61 (3.15%)Rejected-AOC | L2 | Rejected-AOC Second lowest |
Tender Value
₹3.9 L
EMD Value
₹9,696
Closing Date
30 Dec 2023, 3:00 pmClosed
Assistant Executive Engineer
Office of the Assistant Executive Engineer, PWD Electronics Rural Subdivision, PMG, Thiruvananthapuram
GENERAL-LAN at RIQCL-Supply, Installation, Testing and Commissioning of Local Area Network system at Regional Investigation and Quality Control Laboratory,KHRI Building,Kariyavattom, Thiruvanathapuram.-General Electronics Work
2023_PWD_635742_1
PWD/BLDG/EST/2169/2023_7_1_1
Open Tender
Electrical Works
Item Rate
90 days
RIQCL Kariyavattom
as per SBD
15 documents required · 15 mandatory
₹855
₹9,696
24 Jan 2024
26 Dec 2023
1 Jan 2024
26 Dec 2023
30 Dec 2023
26 Dec 2023
26 Dec 2023 - 30 Dec 2023
Amount
OD239097/2022-2023:Supply and Installation of 24-Port Gigabit Managed Network Switch with SFP Layer 2 Rack-mountable Ethernet switch which having 24 x 10/100/1000 Mbps + 4 x 1Gigabit SFP ports, supporting ipv6, stackable, Minimum 56 Gbps switching capacity, security features like IP to MAC binding capability, DHCP snooping etc. link aggregation capacity, advanced Layer 3 Traffic Management, having 512 MB RAM, 256 MB flash memory, inbuilt AC 120/230V power supply Warranty: 3 Year Approved Make: Allied Telesis, Brocade, Cisco, HP, Juniper, Netgear, Tejas.
OD239080/2022-2023:Supply, installation, testing and Commissioning of 24 port Enhanced CAT-6, Fully loaded rack mountable Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Approved Make: Actassi, Belden, Legrand, Molex, Panduit, R and M, Systemax.
OD239101/2022-2023:Supply and installation of good quality 19 inch 9U wall mountable Network Rack with 500 mm depth and having front glass door fitted with 2 set of Horizontal cable manager, 1 set of ISI standard Power Distribution Unit, with min 6 nos. of 6A, 3-pin AC sockets, 2 Nos. of cooling fan etc. Approved Make :- D-Link, HCL, Netrack, President, Valrack.
OD190127/2023-2024:Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with two numbers of RJ45 keystone socket in the existing CMS/existing PVC Box including terminating the cables in the existing patch panel, testing each and every node point and making permanent labeling at the I/O and on the patch panel. Approved Make: Actassi, Belden, Legrand, Molex, Panduit, R and M, Systemax.
OD190128/2023-2024:Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover single face plate with one numbers of RJ45 keystone socket in the existing CMS/existing PVC Box including terminating the cables in the existing patch panel, testing each and every node point and making permanent labeling at the I/O and on the switch Approved Make: Actassi, Belden, Legrand, Molex, Panduit, R and M, Systemax.
OD190137/2023-2024:Supply and installation of Gigabit PoE+ injector having 15 W power supply and 3 years OEM warranty, suitable for connecting the Wi-Fi access point from existing Non POE switch. Approved Make: Allied Telesis, Brocade, Cisco, HP, Juniper, Netgear, Tejas, Tenda, TP Link.
OD190138/2023-2024:Supply and Installation of Manageable Wi-Fi (6)- Access point having following Specifications: Indoor Dual Band Wi-Fi Access Point . Frequancy : 2.4GHz and 5GHz, Wireless Mode: 5 GHz 802.11ax 2x2 MIMO for up to 1.2 Gbps wireless data rate with Multi User MIMO support (Wi-Fi 6), 2.4 GHz 802.11ax 2x2 MIMO for up to 574 Mbps wireless data rate (Wi-Fi 6). Power over Ethernet (PoE): 802.3af/at POE, Anteenas: Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.9dBi in 2.4GHz and 5.7dBi in 5GHz. Certifications: Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3,Bluetooth SIG and Ethernet Alliance certifications etc. including all accessories such as power adaptor, mounting kit, connecting CAT-6 patch cords as per site condition, etc. Approved Make: Allied Telesis, Brocade, Cisco, HP, Juniper, Netgear, Tejas.
Cabling
1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
OD239143/2022-2023:Supply, laying, certification and documentation of 23 AWG Solid copper CAT-6 UTP cable with LSZH (Low Smoke Zero Halogen) through the existing conduit and casing-n-capping as required. Approved Make: Actassi, Belden, Moldex, Commscope, R and M, Panduit
OD239194/2022-2023:Supply, laying, testing, certification and documentation of 3Mtr factory crimped CAT-6 Giga UTP patch cord with LSZH sheathing. Preferred Make: Actassi, Belden, Molex, R&M.
OD239195/2022-2023:Supply, laying, testing, certification and documentation of 1Mtr factory crimped CAT-6 Giga UTP patch cord with LSZH sheathing Preferred Make: Actassi, Belden, Molex,Panduit,R&M.
90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid
90.9.2.3:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree
90.9.2.4:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Flat angle 90 degree
90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree
90.9.2.7:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Flat cross
90.9.2.11:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable retainer
OD239903/2022-2023:Supply, Installation, Testing and Commissioning of 1 KVA Line Interactive UPS with 168 AH Inbuilt battery suitable for keeping in the rack. Warranty 3 years. Approved Make:- V Guard, APC, Eaton, Emerson.
OD239904/2022-2023:Supply and Installation of necessary Electrical accessories for the distribution of mains Power to Rack in structured way, including necessary Sockets, Switches, Electrical PVC boxes etc. and all other accessaries as per the site condition.
PowerCMS Technology
Bidder Name
ATLANTA COMPUTERS
PowerCMS Technology
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_965533.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .