PROVN OF STORM WATER DRAIN, STATIC WATER TANK ALONGWITH CONNECTED WORKS IN 28.3 ACRE LAND AT CGDHQ-15 OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Surface excavation n.exc.30cm deep and aveeraging 15 cm in hard/dense soil.

Excavation over area n.exc 1.5m deep and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation over area exc 1.5 and n.exc 3.0 m deep and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base,foundations, filling and mass concrete complete all as specified and directed

M&L Mild steel TMT CRS bars 10mm dia and over cut to length, bent to shaperequired, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

M&L Mild steel TMT CRS bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished surfaces of concrete complete all as specified.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished surfaces of concrete complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surfaces of concrete complete all as specified.

Formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces of concrete complete all as specified.

M&L RCC M-30 (using 20mm garded stone agg) as in foundation, including rafts, footings, foundation beams, plinth beams; bases for columns,etc.,basement slabs, under reamed piles and mass concrete, all as specified.

M&L RCC M-30 (using 20mm garded stone agg) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses

M&L Reinforced cement concrete Type B1 1:2:4 using (20 mm graded stone aggregate) as in:Beams, cantilevers, bressumm ers, lintels over 1.5m span

M&L RCC M-30 (using 20mm garded stone agg)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L Reinforced cement concreteType B1 1:2:4 using (20 mm graded stone aggregate) as in Chajjas

M&L for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, coving and coping as directed incl necessary form work

M&L for walling precast cement concrete type C1 1:3:6 (20 mm graded aggregate) block masonry with solid blocks, exc.10 cm in width and setting in mortar 1: 6 complete.

M & L for rendering 5mm thick in CM (1:3) on concrete surfaces finished even and smooth without using extra cement. ( WPC shall be measured and paid seperately

M & L for rendering 15mm thick in CM (1:3) on concrete surfaces finished even and smooth without using extra cement. ( WPC shall be measured and paid seperately

Supply only integral waterproofing compound.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work.or concrete surfaces finished even and smooth.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work.or concrete surfaces finished even and smooth ( WPC shall be measured and paid seperately) in two layers 10mm 1:4 & 5 mm 1:4 mixed with wpc

M&L40mm thick plain cement concrete type B-1, 1:2:4 (20mm graded )aggregat as in floor making even and smooth with using extra cement

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in, coping , plinth courses, string courses, lacing courses, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for Cement concrete 1:2:4, type B-0(using 12.5mm graded aggregate ) in ,surface channels necessary form work and finishing of exposed surfaces of concrete as specified.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for framed work such as such as grills,gratings.,etc., ladders,door or gate of angle or other and fixing complete Fe 290 (Gde E-165)

Welded steel wire fabric supplied and fixed complete to steel members Weight N exc 4 kg/sqm ,mesh size 150x150mm dia of wire 5.6mm all as specified

M & L preparation of new steel surfaces and applying two coats of synthectic enamel paint over a coat of red oxide zinc chrome primer

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer, complete all as specfied and as directed.

M & L hardcore of guage n exc 63 mm,deposited,spread and levelled in layers n.exd. 15 cm thick,watered and rammed to a true surface

M&L for PCC 1:3:6 type C2 with using 40mm graded stone aggregate in plinth protection

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

Returning, filling in, including spreading,levelling, watering and well ramming in layers not exceeding 25 cm thick with soft /disintegrated rock complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required

Removal of excavated rocks to a distance exceeding 500 m and n.exc.1500m depositing where directed at a level complete all as specified and directed

Supply and installed testing and commissioning submersible pump set , electric drivern 3 phase, 415 V (+10 or -10), confirming IP 68, CI Body, CI/Bronze impeller of head range 8-14 m, discharge 3600-475 LPM capacity of solid handling size 45 mm including installation , etc. complete all as directed by Engr in charge. Make :- Kirloskar(11000CW 4PL) / Lubi (LHP-61535)

Supply and fix DOL submersible Starter for submersible pump for 15 HP motor, 17.4 A-24 A , 415 V, 3 Phase, 50 Hz, including lugs and necessary fixture of cable connection complete all as directed by Engr in charge

M&L weather proof flexible three core flat cables copper conductor insulated with PVC sheathed for submersible pump motor with voltage grade up to 1100 including proper lugs and fittings all as specified and directed by Engr-in-charge.

Supply, lay and joint in trenches 150mm bore, ductile iron (DI) pipe Class "K-7" , of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating and external surface with bituminous paint of size150 mm (6") dia ISI including specials all as spd and directed. Make: Jindal / TATA Ductura / Electro therm / Lanco /Sri Pipes/ Electrospun/

Supply, lay and joint in trenches 300mm bore, ductile iron (DI) pipe Class "K-7" , of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating and external surface with bituminous paint of size300 mm (12") dia ISI including specials all as spd and directed. Make: Jindal / TATA Ductura / Electro therm / Lanco /Sri Pipes/ Electrospun/

M & L bends (any type, radius and angle) tapers any type (straight bend, increasing, decreasing or double socked etc) tee pieces , single branch, junction, double branch, cross ( all sockets or socket and spigot) collars, caps plugs suitable for the pipe upto 300 mm bore.

M & L NRV / Reflux valve cast iron body heavy duty with by pass arrangement suitable for size 150 mm dia complete including nuts, bolts, washers, CI flange and gasket etc all as directed at site.

Supply & fix of sluice valves flanged type class PN 1.6 of size 150 mm dia bore complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fixing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured elctric cable heavy duty 1100 volt grade with stranded aluminium conductor of size 50 sqmm 3.5 core

S & F VTPN DB 04 Way made of CRCA sheet, for flush mounting type with 250 Amp busbar copper, fully insulated & shrouded neutral bar, earth bar, fixed on wall, Prefitted masking sheet, Reversible Door confirming to IP 54 all as specified and comprising of following:- (i) MCCB 160 amp FP 36 KA 01 no (incoming) (ii) MCB 63 amp TP 25 KA C curve : 3 Nos (iii) MCB 6/32 amp SP 10 KA C Curve : 03 Nos MAKE: SCHNEIDER/ LEGRAND/ HAGER

Supply & Fix heavy duty Flexible pipe 150 mm dia bore with clamp and accessories for connection with 150 mm MS pipe for delivery all as specified and directed

M/L for plain cement concrete (PCC) in foundation using 1:3:6 mix type C-2 using 40mm graded aggregate for foundation/ support all as directed by engr in charge.

Supply & fix LED tube light along with fixture, 20 W

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

M & L for point wiring using ISI marked 1.1 kV grade single core FR-LSH flexible cable, having multi-drawn thin strands of electrolytic copper conductors, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 20 mm NB PVC medium grade recessed conduits, not less than 1.2 mm thick modular flush sheet metal enclosure and suitable for and including modular cover-plates frames ,complete all as specified and directed for One 16 A socket outlet, independent, with cables 1.5 mm² size Cost of cutting / chasing on wall and making good after repair deemed to be included in unit Rate

One light /fan point / bell point controlled by one, one way switch

One 3 pin 6 Amps socket outlet on same board

M & L for point wiring using ISI marked 1.1 kV grade single core FR-LSH flexible cable, having multi-drawn thin strands of electrolytic copper conductors, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 20 mm NB PVC medium grade recessed conduits, not less than 1.2 mm thick modular flush sheet metal enclosure and suitable for and including modular cover-plates frames ,complete all as specified and directed for One 16 A socket outlet, independent, with cables 2.5 mm² size. Cost of cutting / chasing on wall and making good after repair deemed to be included in unit Rate

M&L for Sub main wiring with two runs of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25 mm dia (external) but shall be increased as per actual site requirement in accordance,with wall thickness not less than 1.8 mm complete with all necessary fitting and including with conduit accessories and one run of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling complete all as specified and as directed

S & F modular type 6 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type 16 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M & L for ceiling rose, surface bakelite, 65x17 mm three terminals complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 63 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

K B N TRADERS

K K Construction Co

AADESH CONSTRUCTION

roxy enterprise

shree chamunda enterprise

Shree Ashapura Construction Co

JAMNAGAR ELECTRIC AND MACHINERY CO

JAY BHARAT METAL SUPPLIERS