Civil work for Renovation & Maintenance of Office Building & R.C.C. Pavement for Material Stacking at Kawant Sdn Campus under Bodeli (O&M) Division

Name of work : Civil Works for Renovation & Maintenance of Office Building & R.C.C. Pavement for Material Stacking at

Kawant Sdn Campus Under Bodeli Dn.

Schedule-B1 (CIVIL WORKS)

No Description Quantity Rate Unit Amount

Excavation for foundation for depth from up to 1.5 M. m including

strutting, shoring wherever necessary and throwing away the extra stuff

with in the lead of 50 Mt. radius and its dressing etc. complete as directed

by E. I. C..(B) Dense & Hard Soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

2 excavated stuff (C) Hard Murrum including strutting, shoring wherever 45 228.29 Cu.Mtr

necessary and throwing away the extra stuff with in the lead of 50 Mt.

radius and its dressing etc. complete as directed by E. I. C.

3 Do as above from 3.0 Mt. to 5.0 Mt.-Dense or Hard Soil 5 308.48 Cu.Mtr

Filling in Plinth with selected excavated earth in trenches, plinth,side of

4 foundation,etc. in layers not exceeding 20 cm thick watering,ramming, 80 132.33 Cu.Mtr

consolidatingand dressing etc.complete.

Filling in foundation and plinth with murrum or selected soil in layers of

5 20cm. thickness including watering, ramming and consolidating etc. 10 293.36 Cu.Mtr

Filling in Plinth with sand under floors including watering,ramming,

consolidatingand dressing etc.complete.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistent with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

7 percent is recommended i.e. one litre 20 EC chemical emulsion with 19 235 97.84 Sq.Mtr

liter give 1 % concentration inclusive of one litre chemical emulsion

application at the rate of 5 Litre chemical / Sq.Mtr of surface is

recommended as per I.S

Providing & laying C.C 1:4:8 ( 1- Cement:4- Coarsesand-8 machine cut black

metal stone aggregate 40mm nominal size) for foundation & plinth

including mixing, watering ramming, consolidating necessary formwork

etc.,completas directed by E.I.C.

Providing & laying controlled concrete M-150 and finishing smooth with

9 curing etc.complete excluding the cost of formwork but excluding the cost 6.6 3825.87 Cu.Mtr

of reinforcement for R.C.C. work.

Providing & Laying controlled cement concrete M-200 curing complete

excluding the cost of form work and excluding the cost of reinforcement

for exposed reinforced concrete work with minimum cement level of

10 Bags per Cu.Mtr. Vibrator and Mixture machine for mixing: concrete is 6.4 3903.19 Cu.Mtr

must. for Foundation, footings, Bases of columns, water tank under ground

slab, Pedestal up to Ground beam etc. and Mass concrete.EIC.

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

11 of reinforcement for R.C.C. work in (B) COLUMNS and struts up to floor 3.5 10102.67 Cu.Mtr

two level including water tank up to 13 meter height having cross sectional

area of any section. EIC

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

12 of reinforcement for R.C.C. work in (A) BEAMS upto floor two level 3.5 7910.98 Cu.Mtr

including water tank upto 13 meter height having cross sectional area of

any section, EIC

DO As above but for Slabs having thickness from 8 to 10 cm including

chajjas, weather sheds, cantilever, etc. up to Two floor level including

water tank up to 13 meter height with prop height up to 4.00 meter.

DO As above but for Slabs having thickness from 10 to 13 cm including

balconies, cantilever, Stair case, etc. up to Two floor level including water

tank up to 13 meter height with prop height up to 4.00 meter

Providing & Laying controlled cement concrete M-200 and curing complete

including the cost of form work and reinforcement for reinforced concrete

work in Sill, lintels, core bearing, through coarse upto 13 meter height

with prop height upto 4.00 meter.

Providing and laying Thermo Mechanically Treated (TMT bars) steel

reinforcement conforming to grade FE 500 D IS : 1786 for RCC work

16 including cutting, bending, hooking and binding the reinforcement with 4200 76.52 KG

approved quality of binding wire etc., completed as per design TMT

bars.EIC,up to 13 meter height for any Diameter.

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials(A) By manual

means in area of light jungle

RCC Trimix Road: Providing and Laying Controlled cement concrete M20

for trimix RCC excluding the cost of reinforcement & including of using

125micron polythene sheet at base of concrete, using approved quality

polyester fiber (12mm) during mixing of cement concrete(@125gm per

bag) and or as per manufacturer's specification including preparing the

sub base with form work of M.S Chanel of required size to maintain level

and slope of concrete with using surface vibrator, finishing the surface

with power floater and trove, light brooming on the surface with

providing construction joints of size 10 mm wide 25mm deep in

transverse direction @4.5m C/C with sealing the same with approved

quality bitumen sealent and providing expansion joints of size 25 mm

width and upto through depth of concrete using 25mm thick Dura Board

HD-100 of approved quality and sealing the same with approved quality

bitumen sealent at 40meter C/C and or as directed using concrete cutter

machine with necessary equipments, labors tools tackling guarantee

Providing, supplying, & mixing the " chadpur" chemical hardonite for

smoth luster finish to surface of road. Chemial to be used as per

19 700 20 Sq.Mtr

manufacturer's specifications & instructions given from EIC having

consumption rte of 1 kg/ Sq.Mtrtr.

Brick work using common burnt clay building bricks having crushing

20 strength not less 35 KG. / sq. cm. in foundation and plinth in cement 27 4080.74 Cu.Mtr

mortar 1:6 (1 -Cement: 6 - Fine sand) Conventional Bricks.

Do as above - but for Brick work in superstructure above plinth level up to

21 floor two level including parapet/cabin wall as well as water tank up to 13 20 4353.03 Cu.Mtr

meter height.EIC. Conventional Bricks.

Half brick masonry in common burnt clay building bricks having crushing

strength not less than 35 kg/sq.cm. in cement mortar 1:3 (1 - Cement : 3 -

22 Coarse sand) above plinth level up to, floor two level including 15 599.3 Sq.Mtr

parapet/cabin wall as well as water tank up to 13 meter height -

Conventional Bricks.EIC

Providing 15 mm. thick mala cement plaster in single coat. Providing

mm. thick cement plaster in single coat in C. M. (1:3) up to floor two level

23 including water tank up to 13 meter height on fair side brick / concrete 198 239.42 Sq.Mtr

wall for interior/exterior plastering including necessary grooves,

scaffolding, curing etc.completed as directed by EIC.

Providing 10 mm thick mala cement plaster in single coat on ceilings and

soffits of stairs up to floor two level including water tank up to 13 meter

height in C.M. 1:3 including necessary grooves, scaffolding, curing

etc.completed as directed by EIC.

Providing 20 mm. thick mala cement plaster in single coat. in C. M. (1:3) up

to floor two level including water tank up to 13 meter height on fair side

25 brick / concrete wall for interior/exterior plastering including necessary 105 334.18 Sq.Mtr

grooves, scaffolding, curing etc. completed as directed by EIC.

Wall painting (Two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surfaces to give an even shade

including thoroughly brushing the surface free from mortar dropping and

26 other foreign matter and also including preparing the surface even and 850 120.26 Sq.Mtr

sand papered smooth including Applying two coats of Birla or Asian acrylic

lappy ( putty) & two coats of primer up to height of 13 Mtr.

Finishing wall with wether proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Painting Two coats (excluding priming coat) on previously painted steel

and other metal surface with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

29 mortar 1:1 including neat cement finishing, watering etc. complete. 50 24.04 RMT

Providing China Mosaic water proofing treatment in Terrace of different

levels preparing roof surface for laying brick bat on cement mortar (1:4)

with special water proofing composed in necessary gradient for easy flow

of rain water, brick bat coba is finally covered by China Mosaic Tikdi fixed

by white cement base added with special water proofing compound. The

treatment is carried along the vertical surface of the parapet and other

joining wall up to height of about 300 mm in a shape of quarter round

vata. The average thickness of the water proofing treatment is about

mm. Minimum thickness at rain water outlet points being 75 mm including

curing etc. complete as per specification and instruction including water

proofing test for minimum 3 days etc., complete as directed by E. I. C.

Contractor should give guarantee for water proofing for 5 years . All the

material including cement should be brought by the contractor at his own

cost. Amount equivalent to 20% of executed item will be kept with

company during guarantee period.

(Measurement shall be taken for actual area of work done)

Providing and fixing in partly panelled and partly glased aluminium Door

shutter having section no 19526 size of 47.62x44.45x1.62 mm @

KG/Mtr with 2 no. 450mm handels as per drawing using colour anodised

alluminium section panel shall be of 9 mm thick both side prelaminated

board MDF board ISI make and 5 mm thick clear reflective toughened

glass of saint gobain or approved make list including EPDM Gasket,

31 Woolen In Shutter, Multiple Lock, Anti Rattling Guide, Lock Guide, handle 14 2400 Sq.Mtr

Antilifting, Shutter Corner Clit, Shutter wing Connecter, Interlock EPDM

Gasket, Interlock Guide, Anti Capillary Pad, Bush Bottom silicon all side &

All Necessary Hardware etc. complete as per detailed drawings, mock

sample and specifications. Only mechanical joints shall be used.Welding

shall not be permitted.

Providing and installing Floor Spring of 60Kgs of DORMA or equivalent

32 make all acessories, lift, level and leads etc. complete. approved by EIC. 2 5627 NO

Providing&FixingGodrejorequivalentDoorCloserwithalltoolsandtackles.

Providing and fixing window having extruded aluminum Colour anodized

section horizontal Three track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

34 vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ 15 2700 Sq.Mtr

Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window.

One track of Mosquito net and Two track of window.

Repairing of the existing aluminium windows & doors including new rubber

gasket, rollers, lock and glass if required including removing and refaxing

35 32 850 Sq.Mtr

with all tools and tackles, screws etc. complete the work as directed by eic.

Providing and fixing aluminium mosquito net with powder coated

aluminum framing member size 40mm x 18mm x 1.29mm with centre

36 support & fixtures and transparent silicon sealant applying surrounding 42 1500 Sq.Mtr

edge of framing including all tools and tackels, etc completed as directed

Providing approved quality of cloth in approved design; shed and color

with aster, backing as per selection by occupant including all as directed by

EIC basic rate of cloth shell be RS. 400/ PER Rmt for 54'' panna.

Labor charges for stitching charges per part in elate pattern including

backside madarpat for 54'' wide part if required with all tools and tackles

38 to complete the work cloth required shell be utilize from item no 35 and 42 300 PART

rest material required to function shall be brought by contactor at hisown

cost. Payment of part shall be considered irrespective of length of part i.e.

for door/window.

Providing and fixing ss pipe of 25 mm dia including all taxes and as per

selection of Occupant as directed by E IC.

Providing and fixing ss knob / side socket to suit the pipe of 25 mm dia

including all taxes and as per selection of occupant as directed by EIC. The

40 rate is per pair in central support is required than same will be paid RS100 18 275 PAIR

per no and only end cap is required as per site condition than same will be

paid rs 150 per pair.

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per Sq.Mtr including both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm c/c, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm c/c to form agrid of 1200X600mm and

41 secondary cross ’T’ of length 600mm and size 24x28mm made of 55 1657.57 Sq.Mtr

Continuous... 0.30 mm thick (Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening

for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using

G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia

and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized

steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre

long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-

painted withfabricating

Providing, polyester baked

and paint, for allinheights,

errecting as per

position MSspecifications,

round,square,rectengle,Angles,Channels, Bright Sq.Bar, Bright Flat bar,

girders etc. for purlines rafters/angle posts, columns, railing, shed,

windows, grill etc. including welding the section making holes Required

holes shall be made in the kotta stone / rcc / masonary etc as directed by

EIC.Rate includes cost of applying 01 coat of Red Oxide and 03 coats of

42 enamel paint of 1st quality of approved shade and make Asian / Berger 1620 100 KG

or equivalent as directed by EIC. necessary welding at site with all tools

and tackles and filling holes with same colour chemical to complete the

work. & one coate of red oxide & oil painting of approved shade and

make.Providing and fixing grill in windows / ventilator as per as per

instruction and drawing as directed by EIC.

Providing anfd fixing F.R.P. frame size 100x50mm and 28mm thick FRP

Depressed panel shutter having extra reinforcement on sides and edges in

gel coat finish . The core of shutter and frame is to be filled up with

injected fire retardant grade polyurethene foam done in situ along with

43 embedded wooden pieces for stiffening and also taking hinges and 16 3283 Sq.Mtr

fixtures,The whole FRP frame and shutter is to be water proof weather

proof , termite proof and resisitance to mild Alkali/acid. Rates are to be

inclusive of S.S.Hinges with necessary screws, alluminium fixtures and

fastening and fasterner sleeves. p-63

Providing and fixing standared extruded of alluminium section of size

x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour anodized alluminium

44 frame with 5 mm thick transparent bronze colour tinted float glass with 3 1288.93 Sq.Mtr

colour anodized alluminium frame for Ventilation with 5 mm thick frosted

glass as details etc complete for.

Providing and construction drip molding / tapak 25mm x 12mm thick over

base coat of plaster on bottom surface of chajjas / slab/ drop wall window

45 fins etc., in cement mortar ( 1:1) in line and level with necessary scaffolding 50 41.6 RMT

, curing etc., complete as directed by EIC.

Filling the electric pipe jari with cement mortar (1:1) with all tools &

tackles and material complete as direted by EIC. The rate is incluive of

disposal of chari waste/debries including watering.(up to 30 Rmt)

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and fixing Mirror ploished Black Granite for Enterance steps, etc

including average 20 to 25 mm thick base coarse for laying ,applying gray

48 cement slurry for fixing and for partition making zari in wall and fill up by 25 2500 Sq.Mtr

cement mortar 1:2 [1 cement : 2 coarse sand] for all type work with all

tools and tackles as per EIC.

Providing and applying rough surface[Ghishi] by machine 20 to 25 mm

49 wide and 2 mm deep on edge of steps (granite/kotah)for anti skiding 20 14 RMT

Providing and applying Half moulding surface of granite/kotah with all

tools and tackls eic.complete.

51 Do But for Kotah stone 20 98 RMT

Providing & Laying Green Polished Kota Stone for flooring over

600*600*25mm (average) thick base of CM 1 : 6 (1 cement : 6 sand) Laid

over & jointed with neat grey cement slurry including filing the joint with

52 white / colour cement, complete in true line & level / slope, cleaning & 10 991.23 Sq.Mtr

rubbing, & for wall cladding, risers of steps, Dado & pillars laid on 10mm

thick cement mortar 1:3 (1-cement :3-coarse sand) & jointed with grey

cement slurry etc. complete as per detailed by architect & directed by

Engineer-In-Charge.

Providing and laying white /coloured non skid glazed tiles 6mm thick in

flooring ,treades and landing laid on a bed of 12 mm thick cement mortar

1:3 (1- cement :3-coarse sand) finishing with flush pointing with flush

pointing in white cement.up to 10 ton/p-96

Providing & laying Ceramic tiles 6mm thick in skrting risers of steps and

54 Dedo on 10mm thick cement plaster 1:3(1-cement : 3-coarse sand) and 100 960.56 Sq.Mtr

jointed with white cement slurry./p-97

Providing, laying & jointing in true line and level 15mm dia UPVC Pipe (SCH -

40) including fittings Ashirvad/finolex make or equivalent and approved by

engineer in charge. Pipe shall be fix on the wall with the help of clamp at

55 every two mt c/c or shall be concealed as directed including necessary 20 71.93 RMT

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of materials.

56 Do as above but for 25 mm dia UPVC Pipe. 80 90.93 RMT

Providing and fixing UPVC/Gun metal check or non-return fully wheel

Providing & Fixing 15 mm. dia.Bib Cock L&K PH-0047 Long Body/ ESSCO or

equivalent brass C. P. Screw down bib tap with flange of approved quality

including fixing with pipe line etc., complete as directed & approved by E. I.

Providing & Fixing Dutron, Syntex, or Plasto make White PVC 3 layer BPA

Free ISI marked Water Tank for Drinking water including one float valve,

59 top air tight cover and all necessary inlet and outlet UPVC MT-FT & other 1500 10 Liter

fittings completed. Rate is including removing of old PVC water tank from

GF to upto 13 mtr height of terrace and stacking at GE as directed by eic.

Providing and fixing P.V.C. Nahni trap of following dia mtrs including

60 making good the walls and floors 100mm inlet and 50mm outlets including 10 566.65 NO

ss jali of 150 x 150mm as directd by EIC.

Providing and fixing standard quality CERA or equivalent Europian WC

Commode EWC including P trap bends and having plastic seat cover fixed

with commode and connection for flush cock with Flush Cock, with Jet

61 spary and concealed stop cock etc., complete as directed incuding 5 5500 NO

necessary PVC pipe connection upto outside of wall with bend etc., for all

floors complete in working condition giving water tight test etc., complete

as directed by EIC.

Providing & fixing best 'Cera' or equivelent make white porcelain

rectangular wash hand basin size 500 X 400 mm. with C. I. M. S. Brackets

fixed in wall including approved quality of brass C. P. Pillar cock L&K make

62 one brass C. P. 15 mm. dia. concealed stop cock L&K make, with P. V. C. 5 3600 NO

supply pipe connection for stop cock to pillar cock 25 mm. dia. Waste pipe

up to 1.0 M. length etc., complete as directed by E. I. C.

Providing & Fixing white porcelain lip shaped CERA Carys model or

Equivalent wall type URINAL PAN of 325x310x420 mm. of approved quality

63 & make including waste coupling bends & necessary outlet of 25 mm. dia. 3 2690 NO

G. I./upvc Pipe connections including providing brass stop cock, PVC

connection etc.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

64 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 10 3624.51 NO

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

Extra over for above item for every additional depth of 0.1 Mt pf part

65 thereof beyond 450 mm depth for Brick masonary chamber.(i) for 500mm 60 262.24 NO

Providing and fixing PVC P-TRAP with brick masonry chamber and water

tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard

weight of cover not less than 4.53 Kg 150 mm. X 100 mm size p or s type.

Providing & fixing to wall, ceiling and floor 10 kg.F/Cm2 working pressure

P.V.C. Finolex / Ashirwad /Suprime or equivalent (HEAVY DUTY) pipe for

drainage line including necessary fittings like bend, tee, Y bend, plug bend

etc., fixed with wall by means of GI clamps of approved quality made from

67 20 x 3mm at 1.50 meter interval of approved quality with oil paint and 6 120.76 RMT

nails filling the joints with PVC solution including necessary excavation if

required as directed by E.I.C. 32mm dia pipe

68 do-40 mm dia pipe 10 126.1 RMT

69 do- 75 mm dia pipe 10 277.46 RMT

70 do 110 mm dia pipe 15 335.69 RMT

Providing & fixing to wall, ceiling and floor 10 KG / Sq. Cm working

pressure P.V.C. Finolex / Ashirvad or equivalent (HEAVY DUTY) pipe for

drainage line including necessary fittings like bend, tee, Y bend, plug bend

71 etc., fixed with wall by means of GI clamps of approved quality made from 70 826.12 RMT

20 x 3mm at 1.50 meter interval of approved quality with oil paint and

nails filling the joints with PVC solution including necessary excavation if

required as directed by E.I.C. Rate is including necessary excavation if

required. 160 mm dia pipe

Providing & Fixing Supreme / Finolex brand or equivalent rigid PVC Pipe

(4.0 kg/cm2) for rain water including necessary fittings like bend shoe,

72 cowl etc., & fixing the pipes to the wall in plumb by means of G.I. Z-Clamps 60 332.91 RMT

of 18 gauge sheet with 1 to 1.5 meter distance, filling the joints with

approved quality of solution etc., complete as directed by E.I.C. 110mm dia

Providing & Fixing 75 mm. or 100 mm dia. PVC cowl ventilators of LIGHT

Type etc., complete.

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height

74 with all labour & material, etc. Complete, as per detailed & directed by EIC. 50 311.3 Sq.Mtr

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

75 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 5 846.12 NO

wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rod complete with C.P. Brass brackets

76 fixed to wooden plugs with C.P. Brass 600mm x 20 mm size 5 597.22 NO

Providing and fixing pre-cast Rubber dye inter loacking concrete Paver

block 60 mm thick with grade of concrete M300 pnumatic compressed by

77 mechanically pressed and as per approved design including 35 to 75 mm 90 697.1 Sq.Mtr

sand layer for levelling and filling the joint with sand in proper line and

level etc.complete.Confirming to IS 15658:2006 as per guidlines of IRC:SP

P&F Precast concrete kerb stone of grey cement block of size 30 cm length

x 30 cm height and 15 cm thick of M200 grade concrete incl.excavation for

fixing with filling the joint with CM 1:3 in proper line & level etc.EIC.

Providing & Fixing 0.60 mm thick corrugated Pre Painted Galvalume sheet

of Tata /Jindal/Monakshi/National/Essar or Equivalent ISI marked make for

roofing including laying in proper alignment fixing with nut bolt ,gusset

79 ,tapping screw washer, silicon etc., complete as directed by EIC. The rate 55 900 Sq.Mtr

is inclusive of all materials, labours, tools tackles, all taxes etc., The

payment shall be made for actual work executed, No extra payment for

over lapping shall be paid. Complete the work as directed by eic.

Demolition including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.RCC work.

81 Do As Above but Plain Concrete 20 602.17 Cu.Mtr

Demolition of brick work and stone masonary including stacking of

82 serviceable materials and disposal of unserviceable materials with all lead 50 544.05 Cu.Mtr

Fill the crack with non expanding Polyeurothen PU based elastomeric filler

material including cut the cracks by grinder atleast 12 to 15 mm & making

v notch,removing all loose materials by depression ,coating on prepared

83 surface for protection ,using chemiacl as approved by eic.as per is 195 200 RMT

specification etc complete including finishing the top with smooth cement

finishing using water proofing compound, curing scaffolding etc., complete

as directed by E. I. C-appd. rate

Removal of loose concrete, races of shoots, grease, oil etc from beams,

column, chajjas, projection, lintel etc using impact high frequency

hammer/chisels without damaging the eisting concrete (if required) and by

84 wire brush(metallic brushes only) including cleaning of existing concrete 20 200 SMT

surface carefully. The item includes all necessary machinery, scaffolding,

including disposal of un serviceable materials etc.comp. as directed by eic.

App.rate chandod sdn work.

Providing and applying of anticorrosive treatment to exposed thoroughly

cleaned structural reinforcement and steel section by two coat of alkaline

rust converting primer FERMET or equivelent confirming to ASTM-117 at

an interval of 05 hours between two coats. Apply bipolar migratory

corrosion inhabitor EPCO-KP 100 or equivelant @ 04M/Ltr over entire

surface to be repaired to prevent corrosion in embedded concrete. Apply

85 two coats of interpenetrating polymer network system IPNET RB or 20 520 SMT

equivelent over reinforcement to protect and make up the lost steel

sections manufacture under CBRI technology. The application shall be

done by brush or spray after cleaning existing reinforcement with wire /

rotary to make the surface free from loose materials, dirt etc.inclusive of

all labour material equipment etc.comp. as per specification and

instruction of eic.App rate chandod sdn work

Patching of damaged concrete surface including building up of surface

profile structural elements by using Dr.Fixit Pidicrete URP chemical on

cleaned corroded steel in the ratio of URP 15 kg: Cement 50 Kg by weight

or recommended by manufacture for first two coat of bonding primer in

86 damaged areas and 2nd coat for application of cement mortar plaster up 20 850 SMT

to required thickness (01 cement : 03 washed sand)with ratio of URP

kg:50 kg cement including of all labour,material,equipment etc. comp. as

per specification and instruction of consultant.App.rate Chandod SDn

Providing,Preparation and fixing 50 mm thick Work Station panels Low

Height made from scallaton of 19mm thick plywood MR Grade of

approved quality (max. @ 600 x 600 intervals) & 8 mm ply double skin (or

as directed) partition panels, 1mm thick Laminated on both facws (Green

lame make) so that total width of partition shall be 50 mm including about

1'0" height glazed panel on top fixing the same by teak wood molded front

boarder patti of required thickness polishing to this T.W. patti all over side

including fixing with fevicol & hardware material etc complete as directed

by EIC.Electrical Race way at floated glass level. All completed with 3-

coates of melamine polish on exposed edge patti and with fitting on site.

(All ply wood sheets,Lamination Sheets should be of Green make or its

equivalent if to be used shall be approved by EIC and 8mm thick float glass

of approved quality

Providing and fixing 25 to 40 mm dia 600 to 700 mm long SS 304 handle in

88 wall with necessary grouting in walls with anchor fasteners etc completed 2 2500 NO

as directed by eic.

Providing and Fixing Stainless Steel 304 Grade 16 gauge railing with 38 MM

Dia Top Pipe, 38 MM Dia Vertical support at every 1.0 Mtr C/C maximum &

89 Two Nos of 20 MM Dia horizontal pipe as per design as per good 12 2500 RMT

engineering practice, the end condition of pipe shall be closed with SS Cap

& properly grinded. The measurement shall be consider & paid for top pipe

90 Hiring of Mechanical Excavator Machine (JCB) per hour basis. 16 711.86 Hour

Rolling and consolidation of soiling including filling in depression which

occcue during process with power roller 8 tonne to 12 tonne.

Providing & Fixing Standard quality 600x600x75mm size M20 RCC Precast

92 manhole cover with frame including 1:3 cement mortar vata to fix the 5 1000 NO

frame for drainage chambers.

Collecting, Carting and unloading materia like crushed stone greet,

chipping, quarry spill/grit, etc. of approved quality from and spreading in

93 required layers leveling etc. camber including applying Road Roller for 225 1200 Cu.Mtr

compaction etc. completed etc. completed with all lead and lift ad directed

Transportation of all debris /earth / grass / bushes with tractor trips etc &

94 thrown awy out side premise s directed y EIC - app. Rate taken 30 600 NO

Total Amount of Civil work Items

Total Amount of Civil work Items

Schedule-B2 (ELECTRICAL WORKS)

Point wiring for Light with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

95 continuity of following type, erected on PVC / Metallic/Wooden box, 3 525 Pt

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.Cat III

6 Amp Plug and 6 Amp switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db boardPoint wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of

96 pipe erected complete with Modular type switch & 5 pin Plug erected 5 553 Pt

on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following

type of accessories.with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.

Do as above for For 16 Amp Plug and 16 Amp switch with 2-2.5 sq.mm Cu.

97 Wire from mcb db board with medium class Rigid PVC pipe and accessories 4 815 Pt

erected concealed in wall/ceiling complete

For 16 Amp Plug and 16 Amp switch with 2-4 sq.mm Cu. Wire with

sq.mm ( green) earthing wire from mcb d b board with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of following

99 type erected on PVC / Metallic/Wooden box, single mounting base frame 4 735 Pt

covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat III

### Bell Points with bell. 3 400 Pt

### Internet point with I/O. as directed by concerned IT engineer. 2 425 Pt

10 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less as directed

2 by concerned IT engineer.

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

10 metallic/white front plate , modules erected with necessary connections

3 as per site situation directed by Engineer In charge. Computer RJ-45 socket

Cat.III as directed by concerned IT engineer.

Internet ISI Cat 6 cabling for internet connection Supplying & erecting

approved make LAN cable of following size in existing pipe as per direction 30 51 RMT

as directed by concerned IT engineer.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with aluminium blades with , canopy

& 30 cm. down rod erected with earthing with anti dust paint. including

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

10 down rod erected duly painted for fan complete with proper insulation

5 without leakage and earthing with Supplying & erecting fan hook box of

10 mm M.S. round bar bounded to the RCC bars up to 50mm length each

side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing with

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

box.(Make shall be approved by Engineer in charge)

### Energy saver 600x600 LED light fitting for false ceilling 8 1800 NO

### Energy saver T5 28w tube light fitting. 5 498 NO

### Energy saver T5 14w tube light fitting. 2 395 NO

Supplying & erecting approved make low noise decorative Exhaust Fan

having square frame ABS body with inbuilt lowers & square frame.250mm 3 1596 NO

with 1350 RPM Cat.II

### 01 sq.mm cu ISI wire for lighting point. 100 55 RMT

1.5 sq.mm cu ISI wire for 6Amp separate main & main for lighting switch

board to board.

2.5 sq.mm cu ISI wire for separate computer main and board to board.

New Distribution circuit box fitting with 4poleMCB 40Amp 1no & 6Amp to

### 25Amp MCB- 16nos fitting complete input and out put connection. 1 8900 Job

Do---but 4pole MCB 40Amp - 1no & single pole MCB 6Amp to 25Amp MCB -

8nos fitting complete input and out put connection

### 63Amp 4pole isolator fitting at near miter box for main switch. 1 1250 Job

New C.I earthing with 1X1/2' X 1X1/2' C.I plat 5' fit dip digging and feeling

11 the charcol, solt 40kg and 20mm dia G.I funnel pipe 6' fit long for feeling

6 the water, 10Sq.Mtrm cu wire fitting on C.I plat with nut-bolt complete.

Total Amount of Electrical Items

Total Amount of Electrical Items

Total Estimated Amount of Civil +Electrical Items in Rs.

Total Amount with GST

Total Amount with GST

Superintending Engineer

Baroda (O&M) Circle Office

I /we hereby accept all the conditions & specification of MGVCL/PWD as well as specification of this tender document and

I/We have read & clearly understood the terms, conditions, and Schedule-B & Technical specifications put by MGVCL on web-

Item Rates are excluding GST.

GST As per latest Government/Mgvcl Rules and it is paid after showing proof of GST payment.

Labour welfare cess will be deducted from bills at rate of 1 % from the Bill amount or as per latest government prevailing law.

The material shall be got tested from Government recognized laboratory i.e.(R & B) or field laboratory of GERI (R&B) or any

Government approved laboratory, for which 1% of Bill amount shall be recovered from the contractor from the RA Bill & Final

Bill. Contractor should pay testing charges in advance as instructed by EIC (Engineer in charge) and same shall be adjusted

while recovering above amount of 1% on production of proof of Original Bills paid to concerned laboratory (i.e. while

recovering 1% amount, any amount paid in advance by contractor to laboratory shall be subtracted from this 1% amount and

only net amount shall be subtracted from bills.) However, if the charges increase over 1% of order amount, no excess recovery

shall be made from the contractor and such excess amount paid by contractor shall be borne by him.

Security Deposit shall be released on successful completion of one year from actual date of completion or finalization of final

bill whichever is later .For special items like water- proofing, anti-termite treatment separate amount shall be deposited as per

SIGNATURE OF CONTRACTOR