SPECIAL REPAIRS TO ROOF, CHAJJA, JOINERY AND ALLIED WORKS AT BUILDING NOS. P-12, P-16, P-21, P-36 AND P-38 AT ETTIKULAM AREA AT INA EZHIMALA

Amount

LIST OF ITEMS OF WORKS

Taking down chowkhats or frames (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down cement plaster any description on brick or stone surface including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down 15mm GI steel tubing and connections for refixing or removal to store complete all as specified and as directed.

Taking down 20mm GI steel tubing and connections for refixing or removal to store complete all as specified and as directed.

Dismantling single layer of mangalore pattern tiles in roofing including battens etc of any description complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and as directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Excavation over areas n exc 1.50m deep and geeting out in hard/dense soil complete all as specified and as directed.

All as per Sl item No. 1.16 above but depth exc 1.50m but n exc 3.0m complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick with soil obtained from excavation complete all as specified and as directed.

Removal of surplus excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.50m above starting point complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping with and including use and waste of form work complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in roof/chajja/kerbs, rounded or chamfered on edges with and including use and waste of necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for hold fast complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, deck slabs and shelves and the like complete all as specified and as directed.

M&L for reinforced cement concrete 1:11/2:3, type A-1 (using 20mm graded stone aggregate) as in slabs and the like complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (using 20mm graded stone aggregate), exc. 10 cm in width and setting in mortar CM 1:6, complete all as specified and as directed.

M&L for precast reinforced cement concrete type A1, 1:11/2:3 (using 20mm graded stone aggregate), as in cover slabs complete all as specified and as directed. NOTE :- Reinforcement shall be measured and paid for separately under respective items of BOQ.

Supply only integral water proofing compound

M&L for lateriate stone masonry built in CM (1:4) complete all as specified and as directed.

M&L for broken stone or boulder loose filling with broken stone or boulder aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed.

M&L for formwork to suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 20mm thick complete all as specified and as directed.

M&L for second class hardwood plain, solid, straight chowkats, wrought, famed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and as directed.

S&F 30mm thick factory made second class hard wood chemically treated glazed/gauzed and skeleton shutter rebated and prepared to recieve glass, gauze etc. with sash bars divided into squares, with plain chamfered or rounded mitred and rebated sash bars any numbers complete all as specified and as directed.

S&F 12mm prelaminatd particle board, interior grade, prelaminated both side with decorative lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F fibre glass reinforced (FRP) door frame 100mmX60mm thick to be laminated with inner core of treament and outer core average 2mm thick FRP with gel coat finish weighing an average of 4 Kgs per metre complete all as specified and as directed. (Make : FESTEL or equivalent)

S&F 30mm thick factory made door shutter made with unsaturated polyster resin moulded to 3mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed. (Make: FESTEL or equivalent)

S&F powder coated aluminium frame for door, window and partition with one or more rebated including joining cleat for fixing etc complete all as specified. (Thickness of powder coating not less than 50 micron)

S&F powder coated aluminium window and ventilator shutter powder coating of any colour (thickness of powder coating not less than 50 micron), fixed type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and as directed.

S&F 100mm size aluminum handles, cast type anodised complete all as specified and as directed.

S&F stainless steel butt hinge, size 100mm complete all as specified and as directed.

S&F aluminium plate type II, hook & eyes 125mm size complete all as specified and as directed.

S&F aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing 250mm size complete all as specified and as directed.

S&F hasp and staple, safety type, aluminium anodised with hinges including bolt to hinges plate and fixes with screws, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, size 125mm complete all as specified and as directed.

S&F aluminum (die cast) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and as directed.

S&F aluminum alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F mild steel flat iron of size 25X6mm as in hold fast confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Supply and fix mild steel flat iron wind tie for fixing to galvalum corrugated sheetings and eaves gutter complete all as specified and as directed.

Supply, fabricate, erect and fix in position Galvanised iron steel work in tubular sections of 14 gauge of any size including special shaped washers, posts, purlins etc complete using ERW or induction butt welded tubes conforming to IS-1239 (Part-I)-1990 complete all as specified and as directed.

Supply, fabricate, erect and fix in position mild steel work as in plates (plain or chequered) Fe -290 (Gde E-165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, tile pattern having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, tile pattern having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and as directed.

Supply and fix in repairs aluminium powder coated snap grid false ceiling (size of grid 605X605mm) of approved design and a pattern. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers. Snap grid (main/cross tee section) supported at ends shall be 40mmX25mmX2mm weighing 0.36 Kg/RM and the main and cross tee shall be jointed at junction/ crossing with angle bracket of size 15mmX15mmX1.5mm, weighing 0.12 Kg/RM complete all as specified and as directed.

S&F Hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means and including ceiling cleats made out of GI flat 40X3 mm size, 60mm long and expension hold fastners 12.5mm dia 40 mm long complete all as specified and as directed.

S&F non asbestos fiber cement building board 4mm thick fixed in ceiling flat or sloping complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of cement mortar 1:6, 15mm thick complete all as specified and as directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of cement mortar 1:6, 15mm thick complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 7mm thick of size exc 0.09Sqm and n exc 0.18Sqm in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match with and incluidng backing coat 10mm thick in CM (1:4) on stone masonry complete all as specified and as directed.

Preparing new or untreated steel surfaces of any description and girth and applying two coats of epoxy coated anti corrosive paint over one coat of epoxy primer complete all as specified and as directed.

Preparing old steel surfaces of any description and girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparing new surfaces of ceiling board and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

Preparing and treating ends of posts, back of chowkats etc area of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and as directed.

Preparing and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts, end of posts, back of chowkhats complete all as specified and as directed.

Preparing new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Preparing old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for applying 3mm thick wall care putty on wall/ceiling surfaces complete all as specified and as directed.

Rendering 15mm thick in CM(1:6) on stone masonry and finish surfaces even and smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on fair faces of stone surfaces with incorporating water proofing compound and finished the surface even and smooth without using extra cement complete all as specified and as directed. NOTE :- Water proofing compound shall be measured and paid separately under respective item of this BOQ.

Rendering 10mm thick in CM (1:3) on ceiling, soffit of chajja and roof projection or other similar work etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Preparing new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper white or tinted including chalk whiting on wall preparatory to distemper and rubbed with abrasive paper and dusted off complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coats of white wash complete all as specified and as directed.

Preparing old treated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Preparing new plastered surfaces of wall and applying two coats of antifungal paint Apex ultima or equivalent over one coat of primer complete all as specified and as directed.

Preparing newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying two coats of antifungal paint Apex ultima or equivalent over one coat of primer complete all as specified and as directed.

Complete removal and preparing old plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper white or tinted over one coat of chalk whiting complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 20mm CPVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F 25mm CPVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F 32mm CPVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F 20mm bore of ball brass valves, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed.

S&F stop valves, cast copper alloy 20mm bore screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F 20mm bore dia union brass to connect iron to poly-ethylene & fixed complete all as specified and as directed.

S&F chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15mm fancy type, chromium plated bib taps, with crunch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F 20mm angle cock fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F 32mm dia PVC flexible waste pipe for urinals/WHB complete all as specified and as directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed.

S&F towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S&F brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F 15mm angle cock with flange Cat part No. K7710 of Prayag or equivalent, screwed down screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F 32mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

S&F waste pipe 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F waste pipe 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius

S&F 110mm PVC (SWR) bends any radius

S&F 75mm PVC (SWR) branch piece. Single (single Y) equal or unequal complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) Nahani /gully trap 125/110 mm with grating on top, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC Eave Gutters of size 6", half round with edges with brackets/clamp etc complete all as specified and as directed.

S&F 50mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/Sqcm complete all as specified and as directed.

S&F vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern ) with plastic water closet seat including fixing of flushing cistern, with flush pipe complete all as specified and as directed.

S&F in repair wash basin, vitreous china flat back of size 550mmX400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F viterious china squatting pan orissa pattern size 580mmX440mm white with integral foot rest including provision of Lime concrete bedding (including fixing of flushing cistern & flush pipe) etc complete all as specified and as directed.

S&F 10 litre PVC valve less, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as bed to drain pipes including packing under & haunching against sides of pipes after they are laid & tested for 110mm dia pipe complete all as specified and as directed.

Disconnecting existing water tank capacity exc 250 litrs and n exc 500 litrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank (cylindrical vertical with threaded closed top) 500 litres capacity hoisted and fixed in position complete all as specified and as directed.

M&L for Hume pipe RCC septic tank with RCC precast manhole covers having vent pipe etc for 25 users including excavation and earth work in any type of strata, returning, filling and removal of suplus spoil to a distance n. exc. 50m incluing all neceaasry fittings complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 B1 smooth finished and reforming benching as required for 110mm internal dia pipes complete all as specified and as directed.

M&L for sub main wiring using two runs of 2.5 Sqmm FR PVC insulated copper conductor 1100 volts grade conforming to IS specification drawn through and including concealed/open conduit along with one run of 2.5 Sqmm PVC insulated copper conductor FR cable as earth lead connected to common earth dolly complete all as specified including taking down unserviceable wiring. Note :- One run of PVC conduit, 2 runs of 2.5 Sqmm PVC insulated copper conductor and 1 run of 2.5 Sqmm PVC insulated copper conductor cable shall be measured and paid as one unit.

All as per Sl item No. 2.23 above but in PVC casing caping of suitable size

M&L for sub main wiring using 2 runs of 4 Sqmm FR PVC insulated copper conductor 1100 volts grade conforming to IS specification drawn through and including PVC casing caping along with 1 run of 4 Sqmm PVC insulated copper conductor FR cable as earth lead connected to common earth dolly complete all as specified including taking down unserviceable wiring. Note :- One run of PVC casing caping and 3 runs of 4 Sqmm PVC insulated copper conductor cable shall be measured and paid as one unit.

S&F in repair single pole and neutral enclosure with 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amps. Make:- Legrand/Indo Asian/ Havells/Standard.

S&F in repair MCB single pole 5 to 32 Amps capacity 230 volts. Make:- Legrand/Indo Asian/ Havells/Standard.

S&F in repair MCB single pole and neutral 32 Amps capacity, C series, 10 KA, 50 Hz, 230 volts. Make:- Legrand/Indo Asian/ Havells/Standard.

S&F in repair MCB single pole and neutral 40 Amps capacity, 'C' series, 10 KA, 50 Hz ,230 Volts. Make:- Legrand/Indo Asian/ Havells/Standard.

Taking down carefully copper/aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good distrubed surfaces and applying colour to match with the existing colour and specification.

M&L for color code point wiring FR PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrandred 1100 volt grade conforming to IS-694 drawn through and including PVC casing and caping of suitable size, modular metal flush box including FR 1.5 Sqmm earth wire copper insulated connected to common earth dolly all as specified for the following:-

One light/ fan point controlled by one switch

One 3 pin socket outlet outlet 5 Amps on the same board with other switches

5 Amps socket point on independent board

All as per Sl item No. 2/20 above but 2.5 Sqmm for 5/15 Amps socket on independent board.

S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable to batten fittings.

S&F in repair calling bell, ding dong AC 230 Volts, single pole

S&F in repair ceiling rose 3 phase/PVC/polycarbonate isolated body

S&F in repair modular switch one way 6 Amps 1 module . Make:- Legrand/Crabtree

S&F in repair modular socket 6 Amps 2/3 pin 2 module. Make:- Legrand /Crabtree

S&F in repair modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose. Make:- Legrand /Crabtree

S&F in repair modular switch one way 16 Amps 1 way 1 module. Make:- Legrand /Crabtree

S&F in repair modular two way switch 6 Amps 1 module. Make:- Legrand /Crabtree

S&F in repair modular bell push flush type 6 Amps 1 module

S&F in repair modular fan step regulator, 2 module. Make : Legrand/Crabtree

S&F in repair Switch socket combination 5A with box. Make :- Anchor / Havells/Legrand

S&F in repair switch socket combination 15A with box. Make :- Anchor/Havells /Legrand

S&F in repair MCB DB SPN 230V double door type with bus bar of appropriate current carrying capacity, neutral link, earth bar and din rail complete of following size. Make:- Legrand/Indo Asian/ Havells/Standard.

S&F in repair Modular white cover plate with frame, 2 /3module.

All as Sl item No. 2.52 above but 4 module.

All as Sl item No. 2.52 above but 6 module.

All as Sl item No. 2.52 above but 8/12 module.

S&F in replacement wall mounted 20 W LED 4ft batten with colour temp 6000K having extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. Make : HAVELLS cat No : ENDURALINEARNEOBS20WLED865SPCWH or C G cat NoLCTLP-20-CDL EQUIVALENT MAKE OF PHILIPS/ Wipro

S&F in replacement wall mounted 10 W LED 2ft batten with colour temp 6000K having surface & wall mounted LED batten with extruded aluminium housing and robust construction with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. Make : Havells cat No : ENDURALINEARNEOBS10WLED865SPCWH or CG Cat part No LCTLP-10-CDL EQUIVALENT MAKE OF PHILIPS

Supply & Fix in replacement High efficacy 1x1 LED flat panel with high brightness LED for glare-free homogenous illumination. Make : Havells, Model : PLUTO PANEL(SURFACE) PLUTOSURFACE1X1PLS15WLED857S OR equivalent in CromptonCat NO LCTLSN-18-CDL/ , Philips.

S&F in replacement 15W surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. Make Havells, Model : INTEGRA NEO (SURFACE) , Ordering code : INTEGRANEOSURFACEEDLS15W840S or equivalent in CG Cat No : LCDSPLN-S-18-CDL

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 W with opal diffuser with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. Make Havells, Model : Endura Rugby NEO - IP65, Cat No : RUGBYNEONFT10WLED860SSYMTOPC or equivalent in philips, CG

S&F in replacement wall mounted 13 W LED 2 feet batten with colour temperature 6000K having surface and wall mounted LED batten with extruded aluminium housing and robust construction with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. Make : CG model : LINNET, Cat No: LCL-14-CDL or equivalent in Philips Model : Astra, Cat No : BN150W LED13S-6500 PSE OD GR

S&F ceiling fan AC single phase 230/ 240 V of size 1200 mm sweep,5 star, Make : Havells Model ES NEO white colour or equivalent in Almonard, CG

S&F fan hook required at site for fixing new ceiling fan and connecting all as specified and directed

S&F wall mounted fan AC single phase 230/ 240 V of size 400 mm sweep. Make : Havells Model Swing or equivalent in Almonard, CG

S&F capacitors 2.5mfd, AC 230 Volts suitable for celling fan/exhaust fan.

S&F 7 W LED lamp with base B22

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 meter deep below ground level, connected to 4 mm size galvanized wire as earthing lead by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in Electric Plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including provn of necessary excavation and earthwork in any type of strata, PCC pit, RCC 1:2:4 type B-1 20 mm thick cover with deformed/twisted steel bars 8mm dia @15cm c/c in both ways complete and 20 mm bore medium grade watering pipe, water funnel with GI wire mesh, 40 mm bore medium grade protection pipe, common salt, charcoal dust, returning filling in soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion all as specified.

Palace constructions

Gates Infra Construction Co

SANDR

KDR CONSTRUCTION