Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC KAVANNUR GRAMA PANCHAYATH KERALA | KANNUR | KERALA | 670002 | L1 | Accepted-AOC L1 | |
| 2 | L2₹7.1 L+₹48,118.95 (7.25%)Rejected-AOC KAVANNUR GRAMA PANCHAYATH KERALA | L2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical L4 |
| Sl No | Description | Qty | Unit | Contractor Balakrishnan V P L2 | AMEER T. L3 | MUBASHIR ALI K L1 | K.T. ABDUL SALAM L4 |
|---|---|---|---|---|---|---|---|
| 1.00Construction of Women's Vocational Training Center | |||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4.76 | cum | 277.54 ₹1,321.09 | 288.78 ₹1,374.59 | 200 ₹952 Lowest | 305.3 ₹1,453.23 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.59 | cum | 7,126.06 ₹18,470.75 | 7,414.5 ₹19,218.38 | 4,500 ₹11,664 Lowest | 7,838.67 ₹20,317.83 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,296.52 | kg | 178.18 ₹2,31,013.93 Lowest | 185.39 ₹2,40,361.84 | 190 ₹2,46,338.8 | 196 ₹2,54,117.92 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 894.41 | kg | 144.32 ₹1,29,081.4 Lowest | 150.16 ₹1,34,304.76 | 158 ₹1,41,316.94 | 158.75 ₹1,41,987.75 |
| 1.00 | OD196590/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 217.32 | sqm | 481.24 ₹1,04,583.08 Lowest | 500.72 ₹1,08,816.47 | 500 ₹1,08,660 | 529.37 ₹1,15,042.69 |
| 1.01 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 32.9 | metre | 726.46 ₹23,900.53 | 755.86 ₹24,867.79 | 700 ₹23,030 Lowest | 799.1 ₹26,290.39 |
| 1.01 | OD196589/2025-2026:Providing and fixing 300mm PVC split pipe for rain water gutter with iron brackets 25x25mm size ,bolts and nuts and washer etc,including macking necessary connection with rain water pipe. | 47.6 | per sqm | 590.07 ₹28,087.33 | 613.95 ₹29,224.02 | 300 ₹14,280 Lowest | 649.07 ₹30,895.73 |
| 1.01 | OD221698/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good
quality blasted rubble including packing to compactness to lines and levels cost and conveyance
of all materials labour charges etc. complete as per direction of Departmental officers at site | 2.17 | cum | 3,081.18 ₹6,680 | 3,205.89 ₹6,950.37 | 3,000 ₹6,504 Lowest | 3,389.3 ₹7,348 |
| 1.01 | 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | 8.93 | cum | 6,437.47 ₹57,454.42 | 6,698.03 ₹59,779.92 | 1,000 ₹8,925 Lowest | 7,081.21 ₹63,199.8 |
Tender Value
₹8.5 L
EMD Value
₹21,184
Closing Date
23 Aug 2025, 6:00 pmClosed
ASSISTANT ENGINEER
AE LSGD SECTION KAVANUR
Annual Plan-2025-26 Kavanoor GP Project No 149 / 2025-26 KAVANUR MINI STADIUM RENOVATION
2025_LSGD_786302_34
ET/03/25-26/AE/LSGD/KVR
Open Tender
Civil Works - Others
Item Rate
AE LSGD SECTION KAVANUR
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,870
Yes
₹21,184
Yes
16 Oct 2025
16 Aug 2025
25 Aug 2025
16 Aug 2025
23 Aug 2025
16 Aug 2025
Amount
Construction of Women's Vocational Training Center
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD196590/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
OD196589/2025-2026:Providing and fixing 300mm PVC split pipe for rain water gutter with iron brackets 25x25mm size ,bolts and nuts and washer etc,including macking necessary connection with rain water pipe.
OD221698/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Contractor Balakrishnan V P (BID ID -2301516)
AMEER T. (BID ID -2304053)
K.T. ABDUL SALAM (BID ID -2301142)
Bidder Name
K.T. ABDUL SALAM
AMEER T.
Contractor Balakrishnan V P
MUBASHIR ALI K
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1294015.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .