PROVN OF TOILET, BATHROOM, INTER CONNECTED DRAIN, TILING AND FLY PROOFING UNDER GE SHIKARGARH JODHPUR

Amount

Surface excavation n.exc 30 cm deep & averaging 15 cm deep getting out in Hard/dence soil as specified and directed

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.

Material and Labour PCC 1:3:6 type C-1 (using 20mm graded stone agg) as in surface channels and drain,laid to slope complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) in foundation filling and mass concrete etc complete etc.all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

Extra over squarred rubble stone walling Jodhpur type regular coursed for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping, water toughs including weathering, slighting rounded or chamfered angles and throating including necessary form work all as directed and specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cem.conc.,using extra cem,including forms,moulds ends etc. material and labour complete all as specified and as directed and specified.

S&F 600mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and directed.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in surfaces channel and concrete bed to drain pipe of bore 450mm including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for Pre-cast cement concrete block type C1, 1:3:6 (20mm graded aggregate) as in masonry with solid blocks, exc. 10 cm in width and setting in cement Mortar 1:6 complete all as specified and as directed.

M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat fair finish surfaces complete all as specified and as directed.

M&L for Formwork for chullah hoods, chajjas through and similar items including edges, surface fair finished complete all as specified and as directed.

M&L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Reinforcement 8 to 10mm dia TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in stirrups complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A1 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted cement mortar 1:3 complete complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3.60 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed. (iv) Finally applying two protective coats of bituminous aluminium based reflective paint to safeguard against UV, including preparing of old surfaces of roof remove all corrosion products brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of painted surfaces (second coat apply after 24 hrs or as per manufacturing instructions).

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW/CICO/SIKA

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

M&L for Jodhpur stone slab patti 40 to 50mm thick set in over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, steps etc; complete all as specified and directed.

M&L for keyed pointing in CM (1:3 ) to Jodhpur type regular coursed masonry complete all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 finished even without using extra cement over stone wall surfaces all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Preparing new plastered surfaces of walls and M&L for applying concrete primer over cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified and directed by Engr in charge.

M&L for prepraing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Preparing new plastered surfaces of walls and M&L for applying concrete primer as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces complete all as specified and directed by Engr in charge.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Preparation of old decorated plastered/ unplastered surfaces of walls etc. & applying one coat of white wash complete all as specified.

Preparation of old decorated plastered/ unplastered surfaces of ceiling etc. & applying one coat of white wash on ceiling complete all as specified.

M&L for PCC 1:2:4 type B0 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in levelling course etc all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer in CM1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

S&F Solid PVC door frames factory made of size 50x47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and as directed from approved manufacturer.

S&F for factory made solid panel PVC door shulter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with neat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification of drawing complete all as specified and as directed.

S&F of factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed i.e, incl taking down and removal of old steel windows from site or to store complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note :- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.

M&L for fabrication of aluminium powder coated ventilators fixed type (with/ without louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample kept in GE office & fixed in position complete all as directed. (Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately)

S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed.

S&F butt hinges, medium weight ,stainless steel of 100mm long size and fixed complete all as specified and as directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and as directed

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised all as specified and as directed.

Supply and fixing 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

Supply and fixing 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

Supply and fix Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

Supply and fix Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

S&F for cast copper alloy chromium plated 2 in 1 Angle Cock with bib top Complete all as per sample and all as specified and as directed.

Supply and fixing for Pillar tap/ Aria Chrome Single Concealed Stop Cocks with Basin Spout Kit, 15mm dia, brass chromium plated, fancy type screwed down, high pressure, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed. (Make: Jaquar Cat No.ARI-CHR-39441K) or equivalent in KOHLER/CRABTREE

S&F PVC connection, 15mm size, with PTMT nuts, of length 450 mm long including taking down of existing old pipe all as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Praayag' Cat Part No 5211 or Equivalent) incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed complete and making good the disturbed portion etc. all as specified and directed.

Supply only PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32 mm dia all as specified and as directed

S&F Vitreous china under/over counter wash basin, white colour, oval shape, size 560x470mm including CP waste fittings PVC waste pipe of suitable size/ bore and fixed over marble/granite or RCC platform including necessery cutting accourding wash basin shape/ size etc; and making good disturbed surfaces to match with the existing complete all as specified. (Make: CERA Cat No. S2030104) or equivalent Kohler/Parryware

S&F for Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections,complete all as specified and as directed.

S&F for SWG gully trap 150 x 100mm all as specified and as directed (Make : ISI Marked)

S&F 15mm bore Wall mixer with Telephonic shower , for iron pipe complete all as specified. Make:- Jaguar / Prayag/Crabtree/Kohler

S&F 15mm bore angle stop cock with wall flange screwed, for iron pipe complete all as specified. Make:- Jaguar (Cat No. ORM-10053 or equivant in Prayag/Crabtree/Kohler

S&F Towel rack with lower hanger ( Stainless steel ) with hook complete all as specified. Make:- Jaguar (Cat No. AHS-1581 Hor equivant in Prayag/Crabtree/Kohler

S&F Soap dish ( Stainless steel ) complete all as specified. Make:- Jaguar (Cat No. AQN-7731 or equivant in Prayag/Crabtree/Kohler

S&F Toilet paper holder (Recessed type ( Stainless steel ) complete all as specified. Make:- Jaguar (Cat No. AHS-1551 or equivant in Prayag/Crabtree/Kohler

S&F Tumbler holder ( Stainless steel ) complete all as specified. Make:- Jaguar (Cat No. AQN-7741 or equivant in Prayag/Crabtree/Kohler

S&F Towel ring round ( Stainless steel ) complete all as specified. Make:- Jaguar (Cat No. AQN-7721 or equivant in Prayag/Crabtree/Kohler

S&F CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F CP greating doom 100mm dia complete all as specified.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer in white colour hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer in white colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/Sqcm, of shape and colour as approved by GE , laid over and including 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

M&L for bedding to drain pipes 150mm dia including packing under, and haunching in PCC 1:3:6 type C2 using 40 mm graded stone aggregate against the side of SWG after they are laid and tested all as specified and as directed.

M&L for 150 mm bore SWG drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1, complete all as specified and directed, including testing etc complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in surfaces channel and drain of man holes finishing surfaces even and smooth complete all as specified and as directed.

M&L for Jodhpur stone patti slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, laid dry as in manhole coveres, sizes as directed by Engineer incharge complete all as specified and as directed.

Cutting into existing manholes, for insertion of 150mm dia of pipe for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching all as directed and specified as directed.

M & L for Concealed point wiring for One light point controlled by one switch using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with PVC conduit with sunken pressed steel terminal boxes in wall but including 3.00 mm thick plastic laminated sheet top cover fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size cable as earth wire ( Green Colour) and connected to earth dolly drawn in same conduit complete . MAKE Of Cable-Finolex/Polycab/Havells

Ditto as per item no 99 but One Fan point controlled by one switch

Ditto as per item no 99 but One 3 Pin 5 Amps socket outlet on same board

Ditto as per item no 99 but One 3 Pin 5 Amps socket outlet on independent board.

Ditto as per item no 99 but using 2.5 Sqmm PVC insulatd, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

M&L for Sub main wiring with PVC insulated but unsheathed 2x4 sqmm multi stranded copper conductor cable passing through and in and incl PVC conduit concealing in wall (by means of chasing incl making good existing ) ISI marked and conduit accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note:- Two run of 4 Sq.mm. and one run of 4 Sq.mm. cable incuding one run of PVC conduit will be measured as one length

Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts.

S/F switch socket combination 2 in 1, 3 Pin, and 5 Amp flush type universal.

S&F switch socket combination 2 in 1,5 Pin 5 and 15/16 Amp flush shuttered type ISI mark. Make: Cona/Anchor

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 32 Amps. Make : Legrand/ABB/L&T

S & F for exhaust fan, metal body, heavy duty 300 mm size with louvers and 3 core PVC insulated copper flexible cable size 23/.0076 including cutting chases on brick wall and groundting with nut bolts on aluminum frame complete all as specified and as directed by Engineer-in-Charge. Make : BAJAJ/ HAVELL'S /CG/ KHAITAN

S&F of LED light fitting 1 X 20/22 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. Make : Havells / Wipro / Philips

S&F of LED light fitting 1 X 10 watt (2 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. Make : Havells / CG / Wipro / Philips

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing all as specified and directed.. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

S&F MCB SPN 6-32 Amps,240 Volts `C` Curve

S&F water heater (geyser) storage type, verticle type of capacity 25 litre, rating 5 star electric driven, 240 volts, 50Hz, AC supply with plug top, fixed on wall by means of anchor fastner - 04 Nos 12 mm dia and 150mm long including 02 Nos PVC connection 450mm long, 15mm bore complete all as specified and directed. Make : Bajaj/CG/USHA

Supply and fixing MCB SP 6-30 Amp 240 volts. Make:- Legrand /C&S /L&T /INDOASIAN

Bhagwati Construction Company

M/S JAGDAMBA ENTERPRISES