SPECIAL REPAIR TO BLDG NO P-604 (SINGLE JCOS LIVING ACCN) OF 11 RAPID (H) DEF AND EMP COY AT AHMEDABAD CANTT

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified & directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 by using old sized bricks complete all as specified & directed.

M & L brick work with sub class "B"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified & directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M & L for rendering 15mm thick on fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instruction finishing the surface fair and even without using extra cement complete all as specified and directed. (WPC measured and paid seperately).

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

Material & Labour for preparation of new plasteres surfaces on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with 02 mm wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over with 2mm wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparation of existing treatment of old plastered surface of walls and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces for any height of building with necessary scaffolding with saftey measures complete all as specified and directed.

M & L for 5 mm thick rendering on ceiling surfaces in any position in CM (1:3) and finishing the surfaces even and fair complete all as specified and directed.

M&L for preparation of new surfaces of ceiling plastered sheet and applying three coat of white wash complete all as specified and directed

M&L for preparation of old surfaces of ceiling plastered sheet and applying two coats of white wash complete all as specified and directed

Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.00 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator complete all as specified and directed.

S & F mild steel frame work as in doors, conforming to Fe-410W (Gde E-250) including fixing of holdfast and hinges complete all as specified. (Note - Hinges shall be measured and paid separately)

S & F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

M & L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed

S & F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete all as all as specified and directed.

S & F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S & F 150 mm size aluminium anodised door handles complete all as all as specified and directed.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as all as specified and directed.

S & F providing SS-316 grade hand rail with 50 mm dia hand rail, middle rail 15 mm dia, and vertical pole 1.00 mtr height of 25 mm dia at 600 mm C/C including necessary cups/fittings, grouting complete all as specified and directed. Note : Railing comprising of hand rail, middle rails vertical post and accessories shall be considered as one unit length

S & F in repair curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete all as specified .

S &F 500 ltrs Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl connecting pipes securing access covers etc complete all as specified.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified.

Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 15 mm complete all as specified and directed.

Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 20 mm complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including all as specified and directed.

S & F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S & F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms), complete all as all as specified and directed.

S & F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

S&F in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified.

S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed.

S & F in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as all as specified and directed.

S & F in repairs Two way cock/Two way Angle cock with wall flange matt chrome finish complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S&F brass 15 mm CP central hole mixer pillar tap for mixing hot & cold water screwed down for iron pipe, fixed in repairs complete all as specified & directed.

S & F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed.

M&L for shotcreting/guniting 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using shot-crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 7 m height)

S& F mild steel welded fabric of weight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified.

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete all as specified & directed.

M&Lfor PCC type B0 1:2:4 using 12.50 mm aggregate as in padding on roof chajja and similar work like this surfaces including demolition of existing concrete in any position and any height complete all as specified.

Taking down cement plaster on roof slab, parapet walls etc, at any height, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 20 mm thick polymer modified ready mix cement based plaster make easy plast from wall plast,chemplast, ready plast from ultra Tech on external surfaces. Complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified and directed

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

Ditto as per item no 66.00 above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified & directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 400x400 mm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed

S&F 19 mm thick expanded closed cell rigid PVC sheet with a particularly fine and homogeneous cell structure and silky matt surfaces, nominal density of PVC sheet should not be less than than 500 Kg/m3, complete all as specified and directed. Make : FOREX Classic or Equivalent

M & L for preparation of old steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Taking down eaves gutters and rain water pipes of presure rating 4kg/cm2 (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

Supply and fixing 110mm PVC (SWR) pipes single socket in any length fixed to wall complete all as specified and directed.

Supply and fixing 75mm PVC (SWR) pipes single socket in any length fixed to wall complete all as specified and directed.

Supply and fixing PVC (SWR) bends 110mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75 mm dia complete all as specified and directed.

Supply and fixing in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

M & L cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) slab flooring, plinth protection providing 150 mm thickness all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard /dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified.

M & L for laying Cement concrete type B2 (1:3:6) in foundations,filling and mass concrete complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.

M & L Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe-290 (Gde E-165) as required complete all as specified.

Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete all as specified.

Taking down copper/aluminium point wiring ( light, fan, socket or power) complete,incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting ( Mirror light,Bulk head,LED Panel 2''x2'',security light,wall fitting,down light,Flood light,post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light point/Ceiling fan/ex fan/call bell point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 91.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

S&F modular switch one way 6 amp 1 module complete all as specified and directed.

S&F modular switch one way 16 amp 1 module complete all as specified and directed.

S&F modular switch two way 6 amp 1 module complete all as specified and directed.

S&F modular bell push, 6 amp, 1 module all as specified and directed

S&F bell multi music type, AC, 240 volts complete all as specified and directed.

S&F modular socket 6/16 - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6 amp 3 ,2 module complete all as specified and directed.

S&F modular hum free electronic step fan regulator, 100 watt 2 module complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x4 sqmm earth wire complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with aluminium housing and polycarbonate diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement Decorative wall light fitting, made out of polycarbonate suitable for B-22 base LED lamp including 10 watts LED lamp, full white of approved model fixed on wall and making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fixing LED bulkhead fitting 10Watt IP 55 degree of protection with pressure die-cast housinf and polycarbonate diffuser duly prewired for connection with flexible multistranded copper conductor cable complete all as specified.

Supply and fix in replacement of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-

SPN, 240 volts, 8ways.

S&F tripple pole and neutral, powder coated, CRCA steel sheet MCB distribution board constructed as per IS 8623 suitable for MCCB incomer upto 160 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc complete all as specified and directed.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.

Taking down carefully Geyser any type any capacity from existing accn and depositing to MES store yard .

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCCB 160A, 36 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

SPN 32 amp.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified

S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of Stainless steel with glass lining, steel provided with high density PUF insulation complete and with all fitting and fixing accessories including PVC pipe connection complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified & directed.

Excavating in trenches in average type of soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point.

Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed.

Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral

Taking up or down GI tubing 25 mm bore and connections including cleaning for refixing or removal from site as directed.

S&F 25 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and directed.

Refixing 25 mm old steel tubing and connecting in new or old position (walls, ceiling, floors) etc complete all as specified and directed.

SNEH TRADERS (BID ID -3462989)

SANVI ASSOCIATES (BID ID -3463411)

RISING ELECTRICALS (BID ID -3463422)

DMA PROJECTS (BID ID -3463701)