C/o Science Laboratory building Senior Secondary School Swarghat in Distt. Bilaspur (HP) (SH- Building portion, water supply, Sanitary Installation, septic tank. Soak pit and Rain Harvesting Tank).

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm (Thirty centimetre)in depth, 1.5 m (One point five metre), in width as well as 10 sqm(ten square metre) on plan) including getting out and disposal of excavated earth lead upto 50 m(fifty metre) and lift upto 1.5 m,(One point five metre) as directed within all leads and lifts in oridinary rock and all kinds of soil including entire carriage of materials in all leads and lifts in and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases of columns etcetera for mass concrete

Columns, piers, abutments, pillars, posts and struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Stairs, (excluding landings) except spiral staircases

Edges of slab and breaks in floors and walls under 20cm wide

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate with cement contents not less than 170 kg.upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate with cement contents not less than 130 kg upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, and laying in position machine batched and machine mixed design mix M-25 (M-Twenty five ) grade cement concrete with cement contents not less than 404 kg.for reinforced cement concrete workmising cement content as per approved design mix including pumping of concrete to site of laying but excluding the cost of centering ,shuttering, finished and reinforcement,including admixture in recommended proportion as per IS :9103 to acceelerate, retard setting of concrte, improve workability without impairing strength and durability as per direction of Engineer-in-Charge.

1:1:5:3(One Cement one and half coarse sand three graded stone aggregate, 20mm nominal size_

Above Plinth level.

Providing, hoisting and fixing in position above plinth level upto floor five level precast reinforced cement concrete, in mouldings as in cornices, windows sills, etcetera including setting in cement mortar 1:3(One Cement three coarse sand) cost of required centering, shuttering but excluding the cost or reinforcement , with 1:1:5:3(One Cement one and half coarse sand three graded stone aggregate, 20mm nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying water proofing treatement in sunken portion of WCs, bathroom etcetera by applying cement slurry mixed with waater pfooring cement compound, consisting of applying (a) first layer of slurry of cement @ 0.4888 kg/Sqm. Mixed with watering proofing cement compound @# 0.242 kg/Sqm. mixedf with water proofing cement compound @ 0.126 kg./Sqm. This laiyer will be allowed to air cure for 4 hourse followed with water curing for 48 hours.

Steel reinforcement (TATA /SAIL / JINDAL PANTHER of (JSPL)Tisco,RINLshyam steel make for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level TMT of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying , filling spreading and levelling stone boulders of size, range 5cm. to 20 cm. in reacharge pit, in the required thickness, for all leads and lifts , all complete as per direction of Engineer-in-Charge.ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Stone tiles (Polished ) work for wall lining over 12mm(Twelve milimetre) thick bed of cement mortar 1:3(One Cement three coarse sand ) and cement slurry @ 3.3 kg./Sqm.(Three point three kilogram per Square metre) Including pointing in white cement complete as per direction of Engineer-in-Charge.ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Raj nagar plain white marble/udaipur green marble /zebra black marble.

Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters, (bathroom and W,.C doors) using synthetic rubber based adhesive including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.56mm and average width of appetue 14mm (Fourteen milimetre)in both windiws and clerestory windwire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished of required size, Klin seasoned and chemically treated hollock wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side/top/centre hung with beading and all members such as as F7D,F$N,K11 B and K12 B etcetera complete of standard rolled steel /sections joints s, mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots inclouding priming coat of approved steel primer, but exccluding the cost of other fittings, complete all as per approved design, (Sectional weight of only steel members shall be measured by payment)

Fixing with 15x3mm (Fifteen into three milimetre) lugs,10cm.(Ten Centimetre) Long embeded in cement concrete block, 15x10x10cm. (Fifteen into ten into ten Centimetre)Of C.C 1:3:6(One Cement three coarse sand six graded stone aggregate, 20mm (Twenty milimetre)nominal size,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing cup board shutters 25 mm ( twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,of Action tesa,,Green ply,Kit ply National ,Novapan, Archidply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 18mm (Eighteen millimetre)Pre-laminated flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked, Action tesa,Green ply,Kit ply National ,Novapan ,Archidply make with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Green ply,Kit ply make in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

construction with frame of Ist class hand wood and well matched comercial 3 ply veenering with vertical grains or cross bands and rface veneers on both faces of shutters including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

35mm (Thirty five milimetre)thick including ISI marked stainless steel butt hinges with necessary screws.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws make of GKW,Atul etcetera. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

300x16mm (Three hundred into sixteen millimetre) nominal size.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

250x10mm (Two hundred fifty into ten millimetre) nominal size.

150x10mm (One hundred fifty into ten millimetre) nominal size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and fixing aluminium hanging floor door stopper,ISI marked anodized (ancodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Single rubber stopper.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. Complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

50mm(Fifty milimetre)

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Double Horizontal type.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. :

Fixed to steel windows by welding .

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm(One hundred twenty grams per Square metre) (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm (Twenty five milimetre)wide x 1.6 mm(One point six milimetre) thick with flanges of 27 mm(Twenty seven milimetre) and 37mm(Thirty seven milimetre), at 1200 mm (One thousand two hundred milimetre)centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm (Twelve point five milimetre)dia x 50mm(Fifty milimetre) long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm (Twenty five into ten into zero point fifty milimetre)of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm(Forty five into fifteen into zero point nine milimetre) running at the spacing of 1200 mm (One thousand two hundred milimetre)centre to centre, to which the ceiling section 0.5 mm(Zero point five milimetre) thick bottom wedge of 80 mm(Eighty milimetre)with tapered flanges of 26 mm (Twenty six milimetre)each having lips of 10.5mm, at 450 mm (Four hundred fifty milimetre)centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel withconnecting clips made out of 2.64 mm (Two point sixty four milimetre)dia 230 mm(Two hundred thirty milimetre)long G.I. wire at every junction, including fixing perimeter channels 0.5 mm (Zero point five milimetre)thick 27 mm(Twenty seve milimetre) high having flanges of 20 mm(Twenty milimetre) and 30 mm(Thirty milimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm(Four hundred fifty milimetre)centre, with 25mm (Twenty five milimetre)long drywall screws @ 230 mm(Two hundred thirty milimetre) interval, including fixing ofgypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm (Three point five into twenty five milimetre)at 230 mm(Two hundred thirty milimetre) c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,finishing with jointing compound in 3 layers covering upto 150 mm(One hundred fifty milimere) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm (One thousand two hundred into two thousand four hundred into twelve point five milimetre)having approx. 15 % (Fifteen percent)perforated area with perforation size and pattern as approved by the Engineerin?charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone slab flooring over 20 mm(Twenty milimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement : four coarse sand)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

25 mm(Twenty five milimetre) thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (One cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Marble stone flooring with 18 mm(Eighteen milimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm(Twenty milimetre)(average) thick base of cement mortar 1:4 (One cement : Four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with (Black Zebra) :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10 mm (Ten milimetre )thick acid and/or alkaliresistant tiles of approved make and colour using acidand/or alkali resisting mortar bedding, and joints filledwith acid and/or alkali resisting cement as per IS : 4457,complete as per the direction of Engineer-in- Chargeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

In flooring on a bed of 10 mm thick mortar 1:4 (One acid proof cement :four coarse sand)Acid and alkali resistant tile

Providing and fixing 10 mm (Ten milimetre )thick acid and/or alkaliresistant tiles of approved make and colour using acidand/or alkali resisting mortar bedding, and joints filledwith acid and/or alkali resisting cement as per IS : 4457,complete as per the direction of Engineer-in- Chargeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

In dado/skirting on 12 mm thick mortar 1:4 (One acid proof cement : four coarse sand)Acid and alkali resistant tile

40mm (Forty milimetre)thick rubbed stone flooring over 20 mm (Twenty milimetre)(average) thick base of cement mortar 1:5 (One cement : five coarse sand) with joints 3 mm (Three milimetre)thick, side buttered with cement mortar 1:2 (One cement :two stone dust) admixed with pigment to match the shade of stone and pointing with same mortar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Red sand stone

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve milimetre)thick bed of cement Mortar 1:3 (One cement: three coarse sand) and jointing with grey cement slurry @ 3.3(Three point three )kg per sqm including pointing in white cement mixed with pigment of matching shade complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Marble stone flooring with 18 mm(Eighteen milimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm(Twenty milimetre)(average) thick base of cement mortar 1:4 (One cement : Four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with (Black Zebra) :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Extra for pre finished nosing to treads of steps of marble stone.

ROOFING

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (Eight milimetre)diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

0.63mm (Zero point sixty three milimetre)thick zince coating not less than 275 gms. /Sqm. (Two hundred seventy five grams per Square metre).

Providing and fixing M.S. BP Sheet 1.66mm (One point sixty six milimetre)to 2(Two milimetre)mm thick in eaves /facia /soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing ridges or hips of width 60 cm (Sixty centimetre)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

0.63 mm(Zero point sixty three milimetre) thick with zinc coating not less than 275 gm/m(Two hundred seventy five grams per metre square .

Providing and fixing 15 cm wide, 45 cm overall semi?circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

0.63 mm thick with zinc coating not less than 275 gm/m

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (Fifteen centimetre)diameter and weighing not less than 440 grams including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimetre)gap for thermal expansion, (i) Single socketed pipes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110 mm (One hundred ten milimetre)diameter

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110 mm (One hundred ten milimetre)diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

110 mm (One hundred ten milimetre)diameter bend

Shoe (Plain)

110mm(One hundred ten milimetre) shoe

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applying priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

M.S. tube

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS Channel door,window,clerestory window frame manufactured from M.S. Channel section of 75x40 mm including hinges jamb,lock jamb,beed and welded continously with M.S. flat 40x12 mm and cleat for fixing MS. hold fast 40x4mm of length 20cm complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm (Fifteen into ten into ten Centimetre)of C.C. 1:3:6 (One Cement : Three coarse sand :Six graded stone aggregate 20 mm (Twenty milimetre)nominal size)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying plaster of paris putty of 2 mm (Two milimetre)thickness over plastered surface to prepare the surface even and smooth completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

With ready mixed pink or grey primer on wood work (hard and soft wood)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. Complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

On steel work

Painting two coats with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

New work (Two or more coats applied @ for external plaster are for height upto 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactureincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm (Six milimetre)cement plaster 1:3 (One cement : Three fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

12 mm (Twelve milimetre)cement plaster of mix on fair side of wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

1:6 (One cement: Six coarse sand)

15 mm (Fifteen milimetre)cement plaster on rough side of single or half brick wall of mix including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

1:6 (One cement: Six coarse sand)

MISCELLANEOUS

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 (M-Thirty )grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etcetera. all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred milimetre)dia MS pipe embeded in cement concrete block 30x30x30 cm( Thirty in to Thirty in to Thirty centimetres) 1:2:4 ( one cement : two sand :four aggregate twenty millmetres nominal size) complere a sper drawing including preparation of ground including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying and half round stone ware pipe 23 cm (Twenty three Centimetre)dia in treches ( Earth work involved to be paid separately as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 1200x1500 mm(One thousand two hundred into one thousand five hundred milimetre)size 12 mm t(Twelve milimetre)hick green chalk board ( Non magnetic) with superior quality framing specially anodized aluminium profile 20 x 15 mm (Twenty into fifteen milimetre)with corner of black surface shall be non porous ceramic particals on the top green surfaces for smooth writting with chalk over 11 mm (Eleven milimetrethick partical board which shall have backing materials of galvinised sheet 0.28 mm (Zero point twenty eight milimetre)thick approx. The board shall be fixed on the wall with specially designed J clump and square clump with the help nylon sleves and screws as per the site requirement complete in all respect as per drawing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Water Supply and Sanitary Installation etc.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge..

1620 (20 mm OD pipe)

2025 (25 mm OD pipe)

Making connection of G.I distribution branch with G.I main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete make of unik.KS,.ANICO. AVR.NVR,.RR.Suw including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC soil, waste and ventilating pipes and jointing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(i)75 mm (one hundred millimeter) nominal bore

(ii) 110 mm (one hundred fifty mm) nominal bore

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(ii)75 mm (Seventy five millimeter) nominal bore

(iii) 110 mm (one hundred ten milimetre) nominal bore

Providing and fixing PVC collars ISI marked including fixing with approved adhesive completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(ii)75 mm (Seventy five millimeter) nominal bore

(iii) 110 mm (one hundred ten milimetre) nominal bore

Providing and fixing PVC single equal branch ISI marked including fixing with approved adhesive completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(ii)75 mm (Seventy five millimeter) nominal bore

(iii) 110 mm (one hundred ten milimetre) nominal bore

Providing and fixing cast iron cowl 75 mm(Seventy five milimetre) dia.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing 100mm (hundred mm) dia PVC floor trap of self cleaning design i/c cutting and making good the walls and floorsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(ii)110X75 mm (One hundred ten into seventy five milimetre).

Providing and fixing water closet squatting pan (Indian type W.C. pan ) make of parryware ,Hindware,Saintaryware ,cera Neycear with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty milimetre) with integral type foot rests hindware ,cera Universal Pan No. 2071 ( two thousand seventy one) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Orissa pattern W.C. pan of size 580x440 mm(Five hundred eighty milimetre into four hundred forty milimetre).

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm (Five hundred fifty milimetre into four hundred milimetre)with single 15 mm (Fifteen milimetre)C.P.brass pillar tap

Providing and fixing 550x400x180 mm (Five hundred fifty into four hundred into one hundred eighty milimetre)size lab sink with C.I. Or M.S. bracket painted white including cutting holes and making good the same but excluding fittings complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

32 mm(Thirty two milimetre) dia

Providing and fixing CP Brass 32mm (Thirty two milimetre)size Bottle Trap of approved quality & make ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm (Six hundred into four hundred fifty milimetre)beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

600 mm (Six hundred milimetre)long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gmsncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre)nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre)nominal bore, 125 mm (One hundred twenty five milimetre)long foam flow, weighing not less than 120 gms

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre)nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre)nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

45 cm length

15 mm (Fifteen milimetre)nominal bore

Providing and fixing fullway brass valve with wheel 15 (fifteen) millimeters nominal bore , as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads, lifts and all incidental charges.

15 mm nominal bore

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm(Four hundred fifty five into six hundred ten milimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg (TGwenty three kilograme)and weight of frame 15 kg)(Fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (One cement : One and half Fine sand : Three graded stone aggregate 20 mm (Twenty milimetre)nominal size), foundation concrete 1:5:10 (One cement : five fine sand : Ten graded stone aggregate 40 mm (Forty milimetre)nominal size), inside plastering 12 mm(Twelve milimetre) thick with cement mortar 1:3 (One cement :three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

nside dimensions 455mm x 610 mm X 450mm (Four hundred fifty five milimetre into Six hundred ten milimetre into four hundred fifty milimetre)deep single pipe line.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing & fixing CI inlet connection for flush pipe with WC pan including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing PTMT grating of approved quality and colour including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Circular type

100 mm (One hundred milimetre)nominal dia

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Cement mortar 1:4 (One cement : Four coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government:

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Cement concrete flooring 1:2:4 (One cement : Two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

40 mm (Forty milimetre)thick with 20 mm (Twenty milimetre)nominal size stone aggregate

18 mm (Eighteen milemetre)cement plaster in two coats under layer 12 mm(Twelve milimetre) thick cement plaster 1:5 (One cement : five coarse sand) and a top layer 6 mm thick cement plaster 1:3 (One cement :three coarse sand) finished rough with spong ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying and fixing C.I. cover 300x300 mm (Three hundred into three hundred milimetre)without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying and fixing C.I cover without frame for Mainhole.500 mm (Five hundred milimetre)diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Earth work in all kinds of soil excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge

Providing and laying Cement concrete, 1:2:4(One Cement two sand four graded stone aggregate, 20mm (Twenty milimetre)inominal size in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

20 mm (Twenty milimetre)cement plaster in C.M 1:4(One Cement four sand ) of mix including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

In gratings, framed, guards, bars ladders and railing, brackets and similar works :-

Providing and fixing soil, waste and vent pipes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

100 mm(One hundred milimetre) diaSand cast iron S&S pipe as per IS: 1729

Providing and fixing 2 HP water pump to lift rain water as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads, lifts and all incidental charges.

Bhupender Singh

Ram Murti Govt. Contractor

SUSHIL CHANDEL