RD road to Deipur_Road_BUSG,SDBC0.100 to 1.500

Cleaning and grubbing road land including uprooting rank vegetation, grass, bushes, shrub, supplying & trees of girth upto 300mm removal of stumps of cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of a 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness etc. complete as per direction of Engineer-in-charge.

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including sprading in uniform thickness, hand packing rolling with three wheeled steel roller 8-10 tonnes in stages to proper grade and camber applying and brooming requisite type of screening/blind materials to fill up the interstices of coarse aggregate watering and compacting to the required density as per clause 404 of MOSRT & H specification for Road & Bridge works (4th Revision) etc. complete as per direction of the Engineer-incharge.(WBM Grade-III). Stone screened dust.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and applying tack coat using bitumen @0.20 kg per sqm on the prepared granular surface / bitumenous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and laying semi dense graded bituminous concrete with batch type hot mix plant using crushed agreegates of specified grading , premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled ,vibratory and tandem rollers to achive the desired compaction as per clause 508 of MoSRT&H specification for the road and bridge works (4th Revision) as per the specification and direction of the Engineer-in-Charge.

Providing the road surface in the both sides of berm manually with approved quality of moorum including all labour charges for spreading, laying, levelling for the work including cost, conveyance, royality and taxes of all materials, finished item of works as per the specification and direction of the Engineer-in-Charge.

Earth Work in excavation for foundation in ordinary soil with all leads and lifts including all labour, T&P articles, safety measures, incidentals, dewatering, removal of stumps and other deleterious materials and disposal up to a lead of 50mtr, dressing of side and bottom as necessary for the work etc.complete as per direction of the Engineer-in-charge.

Supplying and filling in foundation & plinth with sand well watered & rammed including all cost, conveyance, royalities of the materials labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Providing and laying Cement concrete of proportion (1:3:6) in foundation using 40mm nominal size clean black hand broken granite stone metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm thick to the required level, ramming, watering, curing etc. complete including cost and conveyance of all materials with all taxes and royalities and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, as per clause 1501and direction of Engineer in Charge.