Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.8 L+₹78,160.77 (2.30%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹38.2 L+₹4.2 L (12.3%)Rejected-Finance 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹39.6 L+₹5.6 L (16.5%)Rejected-Finance DEPOTPARA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
CERTAIN PROVISION WORKS AS A PROVISION OF CONNECTING PATHWAY ( INTER LOCKING TILES 110x1.5 MTRS) BETWEEN BLDG NO P-5 TO P-38 AT C LOC OF 64 FD REGT ,PROVN OF PATHWAY WITH COVERED SHED AT KRIPAN ARMY PRE PRIMARY SCHOOL, PROVN OF ADDL BATHING POI
2022_MES_560910_4
8533/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹82,000
Yes
14 Feb 2023
16 Jan 2023
6 Feb 2023
16 Jan 2023
4 Feb 2023
16 Jan 2023
Amount
Schedule 'A'
M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L for Flyash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished surfaces even and smooth complete all as specified and as directed. Note:- Mixed with WPC (WPC measured & paid separately)
M&L for preparation new plaster surfaces of wall and two coats of weather coat paint complete all as specified and as directed by Engr-in-Charge.
M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engr-in-Charge.
M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in base for interlocking etc for vehicle to move complete all as specified and as directed.
M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment as approved laid over and including 25 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.
Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers not exceeding 25 cm,
M&L PCC 1:3:6 type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.
S&F steel work in tubular trusses i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed by the Engr-in-Charge.
M&L for M.S flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.
M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50nlIn thick of any colour having tensile strength of 550 Mpa as inroof covering/ cladding to wall, fixed with selftapping screws as specified.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path, plingth protection /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete .
M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M & L for PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in footpath coping /benching to sides of foot path fininished fair and even etc complete all as specified and direected.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for Formwork to soffits of slabs for supporting such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde-E- 250) quality- A
S & F 4mm dia galvanised steel wire, 150x100mm mesh welded steel wire supplied and fixed complete to steel members complete all as specified and as directed by the Engr in Charge.
Surface excavation n.exc (not exceeding) 7.50 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.
M&L for RCC Work (Nominal Mix) (1:1.5:3) Type B1 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for RCC Work (Nominal Mix) (1:1.5:3) Type B1 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for RCC Work (Nominal Mix) (1:1.5:3) Type B1 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC Work (Nominal Mix) (1:1.5:3) Type B1 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts
S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.
M& L for Fly ash Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed.
Rendering 5mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for preparing new plastered surfaces of wall with 1 mm wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.
M&L for preparation new plaster surfaces of wall and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
M&L silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by the Engr-in-Charge.
M&L 100 mm PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.
M&L for 25 mm cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor finished complete all as specified and as directed by Engr-in-Charge.
M&L for 25mm Damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 type B0 including necessary formwork
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specifed.
S&F of 4 mm thick Sheet glass frosted , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S & F vitreous china wash down water closet (Pedestal) including PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc.
S&F vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.
S/F in 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed by Engr-in-Charge.
S&F Vitreous China wash basin Pedestal pattern, white, flat back size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified and as directed by Engr-in-Charge.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 15 mm dial PVC connection 450 mm long, complete all as specified and as directed by Engr-in-Charge.
S&F waste coupling 32of PTMT (half of full threaded) complete all as specified and as directed by Engr-in-Charge.
S&F 32 bore PTMT Wash hand basin waste pipe 90 cm long complete all as specified and as directed by Engr-in-Charge.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S&F 15mm bore Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)
S&F in repair swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make -Prayag/Marc/Essco/Jaquar).
S&F 15mm dia fancy type long shunk concealed Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
M&L for coloured Glazed ceramic tiles in vertical surface 450x300 6-85 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.
M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including 15mm thick screed bed in cement mortor 1:6 complete all as specified
M&L for PVC Floot trap 75 mm outlet, plain with grating including joning with solvent cement complete all as specified and as directed by Engr-in-Charge.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
M&L for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Ditto as above but in wall complete all as specified.
M&L for 110 mm bore PVC (SWR) vent cowl
M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.
S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.
M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as directed by the Engr-in-Charge.
Supply only intergral water proofing compound (WPC) of best quality
M& L for bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed by the Engr-in-Charge.
M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engr in Charge.
M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed by Engr-in-Charge
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.
Removing excavated material exc 1.5 km n.exc 5 KM and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.
Material & labour for PCC in 1:3:6 type C1 ( using 20 mm graded stone aggregate) as in surface channel including necessary formwork.
Extra for forming fair finished drain 30 cm inner girth
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
S&F 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
M& L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
M& L for CP toilet paper holder of any description all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F Stainless steel butt hinges medium weight 100mm long for PVC door.
S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.
S&F Aluminium anodized handles, D type, 150mm long
M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.
M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.
S&F in salt-glazed stoneware gully traps, square or round mouthed, type 'P' fo size 180X150mm complete all as specfied and directed.
Cutting into existing man holes for connecting new drain of 200mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified and directed.
Supply and fixing for mild steel TMT bars, 8mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:3 as in fair faces of brick work or concrete surface of wall and finished surface even and fair without using extra cement with using wpc as per manufacturer instruction (measure seperately)complete all as specified and directed.
Material and labour for 50mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring and finished the surface even and smooth with using extra cement or ramp etc including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed. complete all as specified and as directed by the Engr-in-Charge.
M & L for 40 mm thick PCC for drain channels and benching shall be done in cement concrete 1:2:4 type B1 (20mm gde agg) rendered smooth with extra cement complete all as specified and as directed by the Engr-in-Charge.
M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in flooring of floor etc and finished the spike rolling for vehicle to move including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
M&L for 100 mm thick cement concrete type C1 (1:3:6 ) Norminal mix as in subbase of floor etc and finished the complete all as specified and as directed.
S&F steel work in i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate for stud co;umn in rcc etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming grade St-240 complete all as specified and as directed by the Engr-in-Charge.
M&L for RCC ( Nominal Mix) Type B-1,M-20 (1:1.5:3) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; cover slab, basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for RCC ( Nominal Mix) Type B-1, M-20 (1:1.5:3) (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L RCC ( Nominal Mix) Type B1 M-20 (1:1.5:3) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts
M&L point wiring complete with FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
All as per item above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way all as specified.
S&F of switch socketcombination 2 in 1, 3 Pin 5/15 Amp multipurpose 230 volt flush type uneversal complete all as specified and directed by Engr-in-Charge.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F Wall mounted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed.
S & F Wall mounted slim LED batten 10W ( 2 feet) with extruded aluminium housing, with integrated LED driver complete all as specified and as directed.
S&F High Power LED street light fitting ,system wattage-35 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV built in surge protection device using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.
S&F street light bracket, made out of GI pipe medium grade) 32mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed.
S&F exhaust fan of 250mm sweep A/C single phase 230/240 volts heavy duty complete with fan motor, blade, bracket and ring including grouting anchor bolts and making good to disturbed surfaces to match the existing complete including provision of PVC insulated & PVC sheathed round flexible cable of copper conductor,Three core of size 0.5 sqmm from ceiling rose to connector of fan, surface of the wall shall be made good by cement work/plastering and matching by existing colour ,all the metal part shall be painted two coats of synthetic enamel paint over a coat of primer, writting the MES no. with white colour paint complete all as specified and directed.
Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
S&F MCB single pole & neutral 32 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
M&L for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soilwith and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed.
Supply and lay pipe galvanised Medium class including fitting 25mm directed by Engr-in-Charge
Supply and fix Gun Metal glove gate valves with iron wheel head 25mm dia bore complete with all accessories all as specified and directed by Engr-in-Charge
M&L for cutting existing GI pipe alteration or addition of 40/50mm dia bore insertion of reducer tee complete with all accesssorieds all as specified and directed by Engr-in-Charge
S&F and testing PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 10 sqmm 2core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,
M&L for GI tubing 40 mm bore ,light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.
M&L for horizental boaring across the road without distrubting the road surface for inserting GI pipe complete all as specified and directed Note- Removal of surplus soil shall be deemed to be include in the unit rate (ii) GI pipe will be measured and paid seperately under relevant items
M & L for sand cushioning/filling with river Sand to underground cable/fdn (8 cm thick before laying and 15 cm thick after laying the cable/fdn punned to a thickness of 18 cm) complete all as specified and directed
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed
L. B. SHARMA
M/S SINHA ENTERPRISE
SHRI MANOIRANJAN BISWAS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .