Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹25.4 L
EMD Value
₹60,000
Closing Date
10 Feb 2026, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
Sri Deepak Kamble TA
Supply & Installation of of new 250KVA Diesel Generator set for Hipparagi Barrage & other repairs of D.G.Room
KNNL/2025-26/DA/WORK_INDENT3599
KNNL/2025-26/DA/WORK_INDENT3599
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KNNL Division HBC Div Athani
16 documents required · 16 mandatory
A copy of the Registered KPWD Class-III & above Contractors with validity.
GST Regestration certificate/ Pan Card.
Valid Employees Provident Fund Registration Certificate with EPF paid challan for the previous to the month in which tender is called through kppp portal
The tenderer should complete the provisions of the contract labour (Regulation and Abolition Act 1970) and the corresponding Karnataka Rules 1974)
Scanned signature of the bidder along with phone number / authorised representative in case of a from or company, to be attached while uploading the bid documents. Also in case of authorised representative, scanned copy of power of attorney should be uploaded & the original should be produced at the time of opening of tender.
If there is more than one number of eligible L1 bidders, then bidder selection will be done by lottery process at Division office level and the decision of the tender inviting authority is final in this regard.
The intending bidder should have joint venture agreement on Rs.200.00 bond paper for a period of one years with Class-I Electrical (CEIG) contractor, for executing electrical works. The copies of the J.V. bond, GST, PAN, Work done certificates of value not less than Rs.14.99 Lakhs. The electrical contractor should be notarized by notary and uploaded along with the tender
Latest copy of the Income Tax return for financial year 2024-25 (Assesment year 2025-26).
To qualify for award of this contract each tender in his or her in the last 5 years (2020-21 to 2024-25) should have satisfactorily completed (at least 90% of the contract value of on going works) as prime contractor at least one similar of work as Building works/Repair work value not less than Rs. 14.99 Lakhs (usually not less than 50% of the amount put to tender under this contract.) Work done Certificate issued by an Officer not below the rank of Executive Engineer of the concerned division work of the previous year shall be updated to 2025-26 by giving weightage of 10% per year to bring it to the price level of financial year in which the tenders are invited)
The intending bidder should have achieved a minimum financialturnover of not less than Amount put to tender i.e. Rs. 29.98 Lakhs in at least two financial years during the last 5 years reckoned back from 2025-26 (turnover during 2020-21 to 2024-25 only will be considered) duly updating the financial turnover at 10% per year to bring it to the price level of financial year in which the tenders are invited per annum upto 2020-21. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with Compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished
Liquid Assets and or availability of credit facilities of not less than Rs. 9.00 Lakhs (Credit lines/ letters of credit / certificate from banks) for meeting the fund requirements etc., (usually the equivalent of the estimated cash flow for 3 months in peak construction period)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AxNx2.5- B ) where A Maximum value of civil engineering works executed in any one year during the last five years(2020-21 to 2024-25) (updated to 2025-26 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 0.25 years (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
₹640
₹60,000
3 Feb 2026
3 Feb 2026
12 Feb 2026
9 Feb 2026
Supply & Installation of of new 250KVA Diesel Generator set for Hipparagi Barrage & other repairs of D.G.Room
3 Ph, 50 Hz, 415 V, 0.8 pf, 250 kVA capacity Diesel Generator set mounted on box frame complete with inbuilt fuel tank and battery 2 nos. 24 V and inbuilt standard manual control panel with a...
Supplying & fixing 11 kV GOS : S/B 400 A
Supplying & fixing 11 kV, 400 A Female Contact Blade suitable for Double
Supplying & fixing 11 kV, 400 A Male Contact Blade suitable for Double
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood / panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of...
Providing & filling Silica Gel
Supplying Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose
Supplying, fixing of FIRST AID CHART with lamination. Complete
Supplying & fixing of Rabbit ACSR Pad Clamp
Supplying, fixing and wiring rotary selector switch suitable for Ammeter up to 100 Amps.
Supplying, fixing and wiring rotary selector switch suitable for Volt meter up to 500 Volts.
Supplying, fixing 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
Supplying, fixing Bus bar support insulator (Single) MCVCB
Removing white wash or color wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scratches including cost of labor, material complete as per ...
Applying one coat of water thinkable cement primer of approved brand and manufacture on wall surface :Water thinkable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and applying high elastic and resilient acrylic polymer water proofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the e...
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white c...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/ steel works including preparing the surface after thoroughly cleaning...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc., with EPDM rubber/ neoprene gasket etc., complete as per the architectural drawings and the directions o...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2.doc
Tender Document • 1.77 MB
NOTIFICATION.doc
Instructions to Tenderers • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .