Repairs To Karkoon Quarters At Kaprada Ta- Kaprada, Dist: Valsad(External Sanitary work and Building repairing work)

Sr. Description of Item Quantity Unit Rate Amount

1 Anti-Termite System:Providing and laying of permanent piping 49.00 Sqmt 134.33

technology anti-termite treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every 30 cm interval in the tube,

having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour

fixed by P-clips and nails. The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of building at a depth of

20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as

per building layout ) & Ends of loop pass through a PVC elbow of

minimum 32 mm ID at junction box of wall and floor level, entering into a

steel reinforced grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr

of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall

submit approved line plan for piping system and junction boxes dully

approved by Engineer-in-Charge with bond of 5 year warranty.(i)Anti

Termite chemical injected area (Chemical injecting incl. labour cost)

2 Removing dry or oil bound distemper by a washing and scraping and 402.00 Sqmt 11.30

sand papering the wall surface smooth including necessary repairs to

scratches complete.

3 Dismentaling tiled of stone floors laid in mortar including stacking of 34.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all

4 Dismantling sanitary fittings like wash basin . W.C. pan Indian and 4.00 No 405.65

European type, flushing tank etc. including stacking the materials with all

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 17.00 No 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

6 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 49.00 Sqmt 1404.64

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for light shade

7 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting 6.00 Sqmt 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white cement slurry

8 Providing and laying antiskid ceramic tiles 30 x 30 cm size 6 mm thick in 6.00 Sqmt 970.07

flooring treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white

9 Providing and laying glazed tiles tiles size 30 x 45 cm 6 mm thick in 41.50 Sqmt 1441.22

skirting risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement slurry

10 Providing 20 mm thick double coat mala cement plaster on interior brick 71.00 Sqmt 278.54

/ concrete work for plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For Ground Floor

11 Providing 10mm thick cement plaster in single coat onbrick/concrete 19.00 Sqmt 128.86

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

12 Providing 15mm thick cement plaster in single coat on Rough 48.00 Sqmt 171.80

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

13 Applying two coats of Acrylic lapy (putty) & two coats of primer of 201.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

14 Wall painting (two coats) with plastic emulsion paint of approved brand 201.00 Sqmt 52.19

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

15 Painting (two coats) with plastic emulsion paint of approved brand and 49.00 Sqmt 85.76

manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

16 Wall Painting (Two coats) with weather proof acraylic emulsion paint of 184.00 Sqmt 114.53

approved brand and manufacture and of required shade on exterior wall

surface to give an even shade over and including primery coat with

Alkaly resistance primer of approved brand after thoroughly brushing

surface to remove all dust and remains of loose powdered material etc.

copm. for all height

17 Providing and fixing five courses water profing treatment with bitumen 76.00 Sqmt 471.51

felt consisting of second and fourth course of blown / bitumen or/ and

residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course

and first course with fibre base bitunen saturated under lay type land

third course with fibre base self finished felt type 2 grade 1 and fifth and

final course of stone grit 6mm and down size or pea sizes gravel spread

at 0.008 Cu. Metre / Sq. metre including preparation of surface

excluding grading complete.

18 Providing and fixing mirror polished 18 mm thick Green Marble stone 32.00 Sqmt 2004.85

with full round edge and polished of approved quality in clading on sill

and around the doors/ windows/ ventilation with 12 mm thick cement

mortor CM (1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in charge etc.

19 Providing and fixing 3 shutter 3 track window having extruded 8.00 Sqmt 2420.97

aluminum Colour anodized section frame main outer size 95mm x

24.10mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal two track member

size 92mm x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical member of

size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.547 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt,

Beading clip 19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc

20 Providing and fixing standared extruded of alluminium section of size 2.00 Sqmt 1175.56

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

21 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick ( 14.10 Sqmt 2372.49

Fiber Glass with PUF Injection ) FRP depress panel Single or Double

shutter having extra reinforcement on sides & edges in Gel coat

finish.The core of the both shutter & frame is to be filed up with injected

fire retradat grade polyurethene foam done in situ along with embeded

wooden pieces for stiffening & also taking hinges & fintures.The whole

FRP frame & single or double shutter is to be waterproof, weatherproof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminum fixtures & fastenings &

fartener sleeve.Colour and Shade approved by Engineer-In-Charge.

22 Providinfg and fixing Safty grills of required pattern for windows/ Door 311.00 Kg 2181.60

using necessary 16x16 mm M.S. Square bar, M.S flats and other

structural steel at required spacing including cutting, welding and

fabriction etc. including one coat of primer of approved quality and two

coats of oil painting as per detail drawing etc complete.

23 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank 2000.00 Litre 3.95

of required capacity each with all necessary fittings and connection etc.

complete on terrace.

24 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 55.00 Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

25 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 30.00 Rmt 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

26 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 7.00 Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

27 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 35.00 Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

28 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 20.00 Rmt 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

29 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 5.00 No 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

30 Providing and fixing wash down water closet (European type W C pan) 2.00 No 3001.72

with integral P and S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement five sand) including providing and fixing

plastic seat cover for wash down WC with CP brass hinges and rubber

buffers back plastic seat and including providing and fixing PVC

flushing tank with a pair of C I or MS bracket with complete fitting such

as lead valve siphon 15 mm dia brass ball valve with polythene float CP

brass handle unions and couplings for connection with inlet out let and

over flow pipes 40 mm dia porcelain enameled flush bend including

cutting holes in walls and making good the same connection the flush

bend with cistern and closet vitreous china.

31 Providing and fixing brass screw down stop tap.(A) 15mm dia. 3.00 No 205.83

32 Providing and fixing ball cock of approved. quality as directed.(A) 2.00 No 189.84

Copper Metal (ii) 50mm dia.

33 Providing and fixing washbasin with single hole for pillar tap with C.I. or 2.00 No 1670.26

M.S. brackets painted white including Rubber plug, sutting holes and

making good the same but excluding fittings and also including rate of

C.P. brass waste for washbasin or sink (A) 32mm dia. and M.I. fisher

union for washbasin or sink. (A) 32mm dia.; (A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In white colour.

34 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 2.00 No 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

35 Providing and fixing C.P. brass towel rail comlete with C.P. brass 4.00 No 603.19

brackets fixed to wooden plugs with C.P. brass scews (B) 600mm x

36 Providing and fixing screw down bib taps of following size.(A) Brass 4.00 No 214.81

screw down bib tap polished bright. (i) 20mm dia.

37 Providing and fixing pillar tap, capstan head, screw down high pressure 2.00 No 308.73

with screws, shanks and back nuts. (i) 15mm dia.

38 Providing and fixing chromium plated brass half trun flush cock of 2.00 No 263.77

approved quality including fixing in pipe line etc. complete (ii) 25mm dia.

39 Providing and fixing S.W. gully trap with C.I. grating brick masonry 2.00 No 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

40 Constructing brick masonry chamber for underground C.I. Inspection 4.00 No 3933.95

C.I. Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

41 Constructing Kitchen Platform of 18 mm thick Polished Black Granite at 4.00 Sqmt 4193.52

top and 25 mm thick Kota stone slab one side polished at bottom with

cementing Materials / adhsives including makeing necessary grooves

in walls with Vertical sandwich two Kotastone 25 mm support every

cm centre to centre or as required including all labour material of

approved quality incl. full moulded round front edge granite strip of one

side polished and jointed with grey cement slurry including rubbing and

polishing etc. complete for all floors

42 Providing and fixing 25 mm thick polished kota stone Shalve with full 3.00 Sqmt 667.61

round edge and double side polished of any required and fixing with

cement slurry & adhesive including both exposed edges cut and

Smooth Finished as directed by engineering in charge etc. complete.

43 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted 2.00 No 3586.51

white including cutting holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm

44 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 45.00 0.00 686.90

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

45 Excavation for foundation upto 1.5 m depth including sorting out and 20.00 Cumt 120.01

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

46 Excavation for foundation for depth from 1.5 m to 3.0 m including 4.00 Cumt 166.44

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

47 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 1.00 Cumt 471.69

including watering ramming and consolidating etc. comp.

48 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 1.00 Cumt 3786.47

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

49 Brick work using common burnt clay building bricks having crushing 4.00 Cumt 4121.55

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 - fine sand) (B) Conventional (more than

ton) below plinth.

50 Providing and laying controlled cement concrete M.150 and curing 1.00 Cumt 5318.56

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (C) Plinth Slabs

51 Providing IS Mark TMT FE 500D bar reinforcement for RCC work 70.00 Kg. 77.67

including bending & placing in position complete up to All floor Level

52 Providing 15mm thick cement plaster in single coat on Rough (Similar) 37.00 Sqmt. 222.24

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) with

floting coat of neat cement slurry etc. comp. For Ground floor

53 Constructing brick masonry chamber for underground C.I. Inspection 1.00 No. 7180.44

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more

54 Providing laying (to level or slopes) and jointing reinforced concrete 10.00 Rmt. 678.01

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…1261064.06 Put to tender Rs…1261064.06

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

An Amount of 1230/- (Rupees ) shall be recovered from the 1st RA Bill of this work towards salvage value of dismentalled

/ Diversion material likely to be available from dismentalling the Dismentaling of stone flooring irrespective of the

dismentalled quantity actuallly received on site.

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer, Executive Engineer

Signature of the contractor Dharampur (R&B) Sub Division Valsad (R&B) Division

ÀùËÿëÀËßÞí çèí Dharampur Valsad