Restoration of rain damages on Leda Ghangnoo road KM 0/0 to 12/0 (SH- P/L interlocking Paver Block and V-shape drain at RD 0/0 to 0/225).

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying Cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in equired colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Construction of V-shape drain with cement concrete 1:3:6 (1 cement : 3 sand: 6 graded, crushed stone aggregate 20mm (twenty millimeter) nominal size) with thickness of concrete as 10cm (ten centimeter) and size of drain 45x25cm (forty five into twenty five centimeter) and curing complete including cost of form work consisting as per standard drawing and HP.PWD specification and including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.