REPAIR TO CHAJJA FACIA GUNITING TO CEILING AND STAIR CASE SOFFITS BALCONYS PLINTH PROTECTION AT MD AND OTM ACCN IN THE AOR OF AGE B/R-I AT ARMY AREA JODHPUR

M&L for RCC 1:2:4 type B-1 (Nominal Mix) (using 20 mm stone agg) as in Chajja supported on walls, beams and columns in roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd

Taking down carefully and removing loose and broken concrete by chiseling/ mechanically etc upto a depth of 60 to 150 mm from the roof slab, coloumn, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and washing with clean water with pressure and removing rubbish off the premises to a distance n.exc 50 mtrs and including necessary safety precautions and scaffolding up to a height of 15.0 mtrs complete all as specified.

S&F for Hard drawn steel wire fabric weight not exceeding 4 kg per square metre, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia welding to existing reinforcement complete all as specified and as directed.

M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind old concrete surfaces of soffit of slab, column, beam and similar structural members for new gunited / cement surface. Make : IPH 21 EB of Harjas Coatings & Polymers / Nitobond EP of FOSROC or equivalent make in Dr. Fix it of Pidilite Industries / MC Bauchemie / BASF

M & L for pressure gunniting 40 mm average thickness at a pressure not less than 6kg/ sqcm to all affected RCC structures in cement mortar 1:3 duly modifying with mixture of Nitobond SBR of FOSROC @ 7 litres per 50 kg of cement or IPH-CC resin and IPC-CC hardner of make Harjas Coating & polymers in equal proportion @ 5% of weight of cement or equivalent in Pidilite industries Ltd (Rate included ) and including necessary safety precautions and scaffolding, Tools and plants complete all as per manufacturer's instructions and as directed.

M & L for non shrink, cementatious Micro concrete using Renderoc RG manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in Dr. Fixit or IPH-411 of M/s Harjas Coatings & Polymers modified with 12.5mm graded crushed stone aggregate in the ratio by weight (18kg aggregate: 25kg micro concrete) respectively duly modifying with mixture of Nitobond SBR of FOSROC @ 7 litres per 50 kg of cement or IPH-CC resin and IPC-CC hardner of make Harjas Coating & polymers in equal proportion @ 5% of weight of cement or equivalent in Pidilite industries Ltd (Rate included ) as per manufacturer's instructions, as in sides and soffits of beams,jacketing of columns, ,roof slab and similar structural members including necessary form work for fair finished surfaces use and waste of water tight form work to facilitate pouring of micro concrete, including necessary demolition of RCC any description complete all as per manufacturer's instructions and as directed.

M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on newly gunnited surfaces & Micro concreted surfaces duly mixing polymer modifier 'Nitobond AR' of make: M/s Fosroc Chemicals India (P) Ltd. @ 10 Ltr per bag of cement or IPH-CC resin and IPC-CC hardner of make Harjas Coating & polymers in equal proportion @ 5% of weight of cement or equivalent in Pidilite industries Ltd (IPH CC resin measured and paid seperately)complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions.

M & L for applying curing compound of approved make as specified [Concure WB of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in Dr. Fixit or Harjas Coatings] on newly polymer modified cement mortar as in gunited surfaces & Micro concreted surfaces complete all as per manufacturer's instructions and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 including preparation and 2 coat of cement base paint all as specified.

Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

M&L for Stone slab ( Jodhpur stone) 50 mm thick dressed true and square, in 750mm widh of single stone as in plinth protection etc.punched dressed on exposed faces/edges rounded or chamfered and self faced other side embedded and set jointed in mortar and over 15mm thick screed bed in cement mortar 1:6 complete all as spd as directed

Taking down of existing damaged / loosed cement concrete/ brick tiles from roof / terrace to a depth of average 50 mm including taking down of existing APP membrance if any , cleaning with water and depositing of debris to a distance not exceeding 50m complete all as specified & as directed by Engineer-in-Charge

M&L for 15mm rendering in cement mortar 1:4 mixed with WPC @3% by weight of cement shall be provided at green concrete complete all as specified & as directed

Supply only Integral waterproofing compound complete all as specified & as directed by Engineer-in-Charge

M&L for Bituminious Primer confirming to IS 3384 @ 0.40Litre per Sqm complete all as specified and directed complete all as spd

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface of blown bitumen confirming to IS 702-1988 grade 85/25 @ 1.2kg per sqm by forced application complete all as specified

M&L for PCC 1:2:4 Type B-0 (using 12.5mm graded stone aggregate ) average 40mm thick, well compacted with "V" shaped groove of 10 mm deep filled with mastic bitumen. Size of PCC panel with groove shall not exceeding 2 Sqm complete all as specified & directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

S&F GI chicken wire mesh of 0.71mm dia wire & 12mm mesh size fixed with nails & screws around RCC chajjas/fascias etc complete all as specified & as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:4.

M&L for rendering 5 mm thick in Cement Mortar (1:4) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface and apply a coat of primer and over including two coats of distempering consist of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including a layer of 1mm thick birla white putty to make the surface become smooth complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in dado or skirting fixed over and including 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed.

M&L 10mm thick vitrified ceramic tiles in vertical surfaces light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as spd

M&L Glazed ceramic tiles in vertical surface 300x 450x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile colour laid over and including 10 mm thick screed / rendering in CM (1:4) complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.

S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid cuboard & other Frames/Chowkhat of size 65 x 100 (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid cuboard & other Frames/Chowkhat of size 65 x 125 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single 35 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

M&L 30 mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed.

S&F 35mm thick factory made Plain, framed, 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as

specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with both side decorative face veneer with lipping /frame to match complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron ) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified by Engr. in Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings & specified & directed at site.

S&F in repair hydraulic door closer aluminum body fixed in repair design No 3 universal type, suitable for door shutter all as specified and approved sample

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section for doors and fixed all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F of 100 mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Window ECO 4000, of double rebate openable/fixed frame with side hung shutters (double shutters for glass and gauze) window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 4 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) as guard bar etc complete all as specified and as directed.

S&F Box type steel Ventilator with 80x40x 1.25mm RHS frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge

Supply and fabrication of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as spd

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapple complete all as spd

S&F for 4mm sheet glass pan ordinary quality and glazing with oil putty or MS flat fixed with screw in square n.exc 0.5 sqm each pane complete all as spd

S&F for 4mm figured glass pin head type and glazing with oil putty or MS flat fixed with screw in square n.exc 0.5 sqm each pane complete all as spd

Preparation of new surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over a coat pink primer all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceil

ing section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for 4mm mm thick Non asbestos fibre cement building boards fixed or laid / inserted on GI frame work of size 60x60 cm , fixed in ceiling with staples on snap grid complete all as specified & directed.

M&L for 25mm thick precast cement concrete type B0 1:2:4 (using 12.5mm graded aggregate ) as in jally with frame including all mould-ings as per design dircted by Engr in chage, set in CM 1:4 complete all as spd

M&L for 15 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces mixed with liquid water proofing solution to sunken flooring and padding . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. complete all as spd and directed by EIC. Note:-liquid water proofing solution shall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solution measured and paid seperate item

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC hollow sheet inclusive of solvent cement and fixing by interlocking one to another at site by nails including corner and edge beading as per specifications and drawing complete all as specified & directed.

Demolition of existing un-reinforced cement concrete in sunken floor exc 15cm thickness but above GF complete all as spd

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L PCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as spd and directed