REPAIRS TO CERTAIN STEEL FURNITURE UNDER GE DEHRADUN

Amount

Almirah steel Med and Small FD-243 & 1032

Removing old broken hinges and SW&F new MS hinges of existing shape and size through gas welding complete all as specified and directed

Removing of U/S lock and S&F New lock of 4 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv/Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed

S&F MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed

Removing existing u/s 03Way locking device and S&F new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed

M&L preperation of old surfaces of ALMIRAH MED &SMALL STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying 02 Coat of Silver metallic (externally) and Smoke Grey (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.

Almirah Large steel FD-67 & 1031

Removing old broken hinges and S&F new MS hinges of existing shape and size through gas welding complete all as specified and directed

Removing of U/S lock and S&F New lock of 4 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv / Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed

S&F MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed

Removing existing u/s 03Way locking device and S&F new 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed

M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying 02 Coat of Silver metallic (externally) and Smoke Grey (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Verandah FD-256, FD-19/259

M&L welding (full welding rod as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface & taking out unserviceable part, complete all as specified and as directed.

M&L for Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, & taking out unserviceable Bar, complete all as specified and as directed.

S&F for HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying two coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel With Arms FD-75 (M)

Removing of old broken Seat and S&F new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge.

Removing of old broken Back and S&F new back of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail as directed by Engr-in-Charge.

M&L ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, FD-75(M) including taking out unserviceable Runner & complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying Two coat (OG) of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel W/O Arms FD-75 (M)

M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x5.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 25x5 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Computer and Chair Revolving Various types (TP)

M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

M&L BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

M&L GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

M&L HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING as per existing or approveed by Engr-in charge including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

Chair School with Hand Board FD-140/ FD-48/ FD/E6MAP/05

M&L Moulded PVC/wooden saet and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.

M&L for Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD with welding as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, incl t/dn old leg, rest complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of Black synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, duly painted with two coats of Black Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Locker Bed Side Steel FD-257/1029

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & including taking out unserviceable Shelf, complete all as specified and as directed.

M&L DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Door, complete all as specified and as directed.

M&L LEG made out of 1.6mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Leg, complete all as specified and as directed.

M&L aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

M&L Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Hot food trolley HFD

M&L welding of broken part of HOT FOOD TROLLEY as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces , complete all as specified and as directed.

M&L stainless Steel HANDLE (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 50mm in size suitable for Hot Food Trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Hinge, complete all as specified and as directed.

M&L Mild Wheel without stoper provision (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel , complete all as specified and as directed.

M&L Mild Wheel with stoper (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel, complete all as specified and as directed.

M&L New heating element of Hot food trolley and fixing as shown on Drawing including taking out of old heating element and rest all as per Drawing

Couch Examination FD-122

M&L for TOP of Couch Examination of complete with hassion cloth ,spring,25mm,thick 32 density foam duly leatherite upholstered as shown on Drg.FD-122 including taking out unserviceable top complete all as specified and as directed.

M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as LEG and fixing/ welded to COUCH EXAMINATION as shown on Drawing No. FD-122, incl taking out unserviceable Leg, complete all as specified and as directed.

M&L Mild Steel Squar Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, Long Rail incl taking out old u/s old rail, complete all as specified and as directed.

M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122,&, complete all as specified and as directed.

M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122 incl taking out old u/s old rail, complete all as specified and as directed.

M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, incl taking out old u/s old stiffner, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from COUCH EXAMINATION (Drawing No. FD-122 by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Screen Movable FD-83, HFD-215

M&L Mild Steel conduit Pipe of size 20mm dia, 1.6mm thick as unserviceable part of frame and fixing/welded to SCREEN MOVABLE as shown on Drawing No. FD-83/2015, incl taking out unserviceable part of frame , complete all as specified and as directed.

M&L Wheel (as approved) of SCREEN MOVABLE and fixing as shown on Drawing No. FD-83/ HFD- 2015 including taking out unserviceable Wheel, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from SCREEN MOVABLE by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Chair writing FD/MAP/12

M&L Seat of CHAIR WRITING complete as per existing including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L Back of CHAIR WRITING complete as per existing including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L HANDLE of CHAIR WRITING as per existing including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx), fixing one End and Other End welded to CHAIR WRITING, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed.

Rack steel 6 tier FD-106/1038

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106, FD-1038, incl taking down old u/s self ,complete all as specified and as directed.

Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL as shown on Drawing, rest all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Trestle store steel FD-1043

M&L welding (full round of angle as a one spot) of broken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, & complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Form with Back FD-78

M&L SEAT of FORM WITH BACK made of single plank of MDF Board (18/19mm) of size 1800x255x25mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

M&L BACK of FORM WITH BACK made of single plank of MDF board of size 1800x150x19mm as shown on Drawing No. FD-78 including taking out unserviceable back, complete all as specified and as directed.

M&L for Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing No. FD-78 & complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, &complete all as specified and as directed.

Form with out Back FD-77/ FD-1027

M&L SEAT of FORM WITHOUT BACK made of single plank of MDF Board (18/19 mm) of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed.

M&L for Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 incl taking out u/s old leg ,complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, & complete all as specified and as directed.

Teapoy Varandha FD/E6/MAP/18 & FD-255

M&L TOP of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009,& complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TEAPOY VARANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255,& complete all as specified and as directed.

Shoe Rack FD/E6/MAP

M&L welding (full round on pipe as a one spot) of broken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

M&L preperation of old surfaces of shoe rack (Drawing No. FD/E6/MAP) by Sand Paper/Scrapper and applying 02 Coat of Smoke Grey paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Bed Hard steel FD/E6/MAP/08R

M&L HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed.

M&L FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

M&L Plywood TOP 12mm thick BWR grade , ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed.

M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R incl taking down old u/s stiffner, complete all as specified and as directed.

M&L Mild Steel cleat of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R,&, complete all as specified and as directed.

M&L for Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying Two Coat of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Charpoy MS Tubing with plywood Top FD/MAP-II/01

M&L Plywood TOP 12mm thick BWR grade ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.

M&L in repair MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01,complete all as specified and as directed.

M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying Two Coat of Synthetic Enamelled black Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Table Dining Ors FD-165(M)

M&L TOP of TABLE DINING ORS of Block board 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.

M&L Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), & including taking out unserviceable Leg, complete all as specified and as directed.

M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), including taking out unserviceable long Rail complete all as specified and as directed.

M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), including taking out unserviceable Short Rail, complete all as specified and as directed.

M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), including taking out unserviceable stiffner,complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Table Office Officer Steel FD- 84,1003

M&L TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed.

M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, duly painted with enamel paint (as approved) incl taking out unserviceable Drawer, complete all as specified and as directed.

M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, incl taking out unserviceable Central Stiffener, complete all as specified and as directed.

M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, including taking out unserviceable Side Stiffener, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table office clk Steel FD-84,381&1004

M&L TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed.

M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, including taking out unserviceable Drawer, complete all as specified and as directed.

M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004,incl taking out unserviceable Central Stiffener, complete all as specified and as directed.

M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, ,incl taking out unserviceable side Stiffener complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with out Drawer FD-1007

M&L TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed.

M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, ,incl taking out unserviceable Central Stiffener complete all as specified and as directed.

M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007,incl taking out unserviceable side Stiffener complete all as specified and as directed.

M&L for leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER with welding as shown on Drawing No. FD-1007, ,incl taking out unserviceable leg, Rest complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with Drawer FD-1008

M&L TOP of TABLE 3'X2' WITH DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed.

M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, & taking out unserviceable Drawer, complete all as specified and as directed.

M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, ,incl taking out unserviceable Central Stiffener,complete all as specified and as directed.

M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, ,incl taking out unserviceable side Stiffener, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER as per existing and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER with welding as shown on Drawing No. FD-1008, incl taking out unserviceable leg,complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 900x 900mm steel FD-1009

M&L TOP of TABLE 3'X3' of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009 including taking out unserviceable Top, complete all as specified and as directed.

M&L for Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' with welding as shown on Drawing No. FD-1009, ,incl taking out unserviceable leg, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TABLE 3'X3' a (Drawing No. FD-1009) , complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer to table 3'x3' including taking out unserviceable part, complete all as specified and as directed.

Table Bed Side FD/E6/MAP

M&L TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

M&L Side / Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed.

M&L UPPER DRAWER of TABLE BED SIDE with MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed.

M&L LOWER DRAWER of TABLE BED SIDE with MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed.

M&L LEG of TABLE BED SIDE with MS squre pipe 25x25 mm x 1.6 mm with welding etc as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed.

Table computer FD/E6/MAP

M&L TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

M&L DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID) and fixing to TABLE COMPUTER as shown on Drawing , including taking out unserviceable Drawer, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of TABLE COMPUTER as per existing and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Loker SKD -562

Removing old broken hinges and fixing new MS hinges through gas welding of existing shape and size complete all as specified and directed

Removing of U/S lock and S&F New lock of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed

Removing of unsv/Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed

Removing of U/S & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed

Removing of U/S & rusted shelves and S&F new shelves of reqd size & shape, made out of MS sheet 1mm thick of existing shape and size complete all as specified and directed

Avtarsinghchaddhaandcompany

shekhar & company