Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr Quoted ₹3.0 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹3.1 Cr+₹6.2 L (2.07%)Rejected-Finance | ₹3.1 Cr+₹6.2 L (2.07%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.1 Cr+₹8.1 L (2.70%)Rejected-Finance | ₹3.1 Cr+₹8.1 L (2.70%) | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹3.4 L
Closing Date
30 Mar 2021, 11:00 amClosed
EXECUTIVE ENGINEER
JALS SHAKTI DIVISION DHARAMSHALA
Providing root zone treatment technology to area in accessible to existing main trunk sewer line at various locations in M.C Dharamshala
2021_HPIPH_45412_1
EE/IPHD/-Tender/2021- 18115-18214
Open Tender
Civil Works
Item Rate
365 days
dharamshala
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,500
₹3.4 L
19 Jul 2021
10 Mar 2021
30 Mar 2021
10 Mar 2021
30 Mar 2021
10 Mar 2021
10 Mar 2021 - 30 Mar 2021
Amount
Evolving planning, hydraulic & structural design, site development to adjust hydraulic levels for various STP units, construction, installations, testing, commissioning, trail operation and maintenance (3 months, free of cost) of Decentralized Sewage Treatment Plants based on root zone treatment technology in the shape of constructed wetland primary treatment, secondary treatment, tertiary treatment and disinfection at Naddi. Dharamshala Municipal Corporation of 144 KLD, capacity in RCC construction for Smart City Dharamshala Town in Distt Kangra (H.P.) which should be capable of treating domestic raw sewage of characteristics as per basic data. The characteristics of treated /disposable effluent should comply with the revised standards given in chapter (vi) a. The scope of work includes inlet chamber, screen channel, grit channel (parallel stream) propotional flow weir, multi baffled hybrid anaerobic reactor (MBAR), Constructed wetland, Multi media filter, Chlorine contact tank and disinfection units. including plant building cum chowkidar hut, inter connecting paths and pipes between all units, walk-ways, landscaping of STP providing and installation of lighting arrangement, mechanical/electrical equipments complete in all respects. The design methodology should be based on CPHEEO manual guidelines and clearly indicate proper authentic references, design constants & kinetic equations involved in the process of design calculations dully vetted from IIT / NIT/ PEC/vide rate sheet no.
To operate, repair & maintain all civil works and electro - mechanical equipments of sewage treatment plant and complete sewer network for the period of five years in all respect to the entire satisfaction of Engineer - in - charge . The O&M of sewer network & STP shall be carried strictly as per the provisions made in the latest Manual on Sewerage & Sewage treatment systems issued by CPHEEO ( Eddition 2013 ). Firm should do comply the stringent effluent standards laid down by HP Pollution Control Board .
Excavation in foundation (trenches for pipes and man holes ) etc. upto all depths in all classification of earth work such as pick work, jumper work , blasting soft, hard rock or chiselling hard / soft rock where blasting is prohibited ,i/c cutting of metalled bituminous roads /pucca pavements i/c saturated soil bailing or pumping out water in all lifts i/c trimming and dressing of sides , levelling of beds to correct grade i/c shoring, suttering, planking, timbering dewatering wherever required stacking the useable and unusable material / soil separately and after laying, jointing, testing of pipes returning the useable soil to trenches in 15 Cm (Centimeters) layers i/c consolidating of each deposited layer by ramming and watering and then disposing of all surplus excavated soil un - useable material as directed with in all leads and lifts i/c restoration of un - metalled surfaces to its original condition and also i/c cost of diversion of traffic , night signals , fixing caution boards , crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per the direction of Engineer - in - Charge.
Excavation in foundations,trenches etc in earth work in all kind of soil, such as pick work, jumper work, blasting hard or soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water with in all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetres) layers, when required into plinths, of foundations etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth, as per the direction of Engineer-in-Charge with in all leads and lifts.
Providing & laying Cement concrete 1:4:8 ( 1 Cement : 4 Sand : 8 graded stone Agg. 40 mm nominal size ) and curing complete excluding cost of formwork in foundation and plinth complete in all respect with in all leads and lifts.
Providing and laying reinforcement cement concreate work 1:1½:3 (1 cement: 1½ sand:3 graded Stone 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work:In foundation and plinth with in all leads and lifts.
In walls(any thickness) and not less than 0.10 mtr thickness attached pillaster buttresses, plinth and string courses etc from top of foundation level up to floor two level with in all leads and lifts.
In suspended floor roofs,landings, shelves and their supports balconies, beams girders bressumers and centilevers upto floor two level i/c carriage of material within all leads and lifts.
Providing and laying cement concrete work 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work:In foundation and plinth with in all leads and lifts.
In Columns, pillars, posts and struts up to floor two level.
P/L cement concrete 1:3:6(1:cement :3 sand:6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in:- In foundation and plinth with in all leads and lifts.
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc with batten & ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ-reinforced concrete and plain concrete in:Vertical surface such as wall (any thickness) partition and the like i/c attached pillasters, butresses plinth and string course including all leads and lifts.
Flat surfaces such as soffits of sunspended floor, roofs landings and the like floors etc upto 200mm thickness.
Providing mild steel/tor steel reinforcement for R.C.C. work including, bending , binding and placing in position complete upto floor two level (Tor Steel) with in all leads and lifts.
Steel work welded in built up sections , trusses and framed work including cutting, hoisting and fixing in position and applying a priming coat of red paint :In grating, framed , guards, bars ladders, railling , brackets and similar works complete in all respect with in all leads and lifts.
Providing and fixing of Precast R.C.C ( SFRC ) Manhole cover with frame confirming to IS Specifications Code -12592 Part I & II with latest ammendments complete in all respect with in all leads and lifts. Medium Duty
Providing, laying, jointing and testing of DI pipe spigot and socketed pipe with CML(SBR tyton push on joint) I/C cost of bend complete as per IS 8329-2900 Class K7 Dimensions weight and test pressuers in all respect. 150 mm Dia
Providing and laying UPVC pipe type B as per IS code 13592 or other relative codes/latest edition as per direction of Engineer In Chief. 160 mm Dia
Providing and fixing double socket flange Y_Tee 150x150mm dia as per IS8329-2900 complete in all respect with in all leads and lifts.
Providing and fixing DI Plug 150mm dia complete in all respect with in all leads and lifts.
Providing and jointing tyton (Push on joints) to Ductile iron pipe and fitting i/c testing of the joints, cost of rubber gasket(EDPM Quality) conferming to IS 3382 (Lastest edition /amendments) complete in all respect with in all leads and lifts. 150 mm Dia
Providing and fixing all socket DI Tee/Cross as per IS8329 (Lastest edition /amendments) complete in all respect with in all leads and lifts.
Squarred rubble masonry coursed with hard stones of approved quality in foundation and plinth including racking out joints in C.M 1:4(1cement:4sand) complete in all respect i/c all leads & lifts
Brick work using common burnt clay building bricks in foundation and plinth in CM 1:6 ( 1 Cement : 6 Sand) ic carriage of material with in all lead sand lifts as per the direction of Engineer - in - charge.
Applying cement slury on RCC slab or cement concrete work with in all lead sand lifts as per the direction of Engineer - in - charge.
20mm cement plaster in single coat on rough side of brick\stone masonary for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and\or rounded angles not exceeding 80mm in girth and finished even and smooth in C.M 1:4 (1 Cement :4 Sand) with in all leads and lifts.
Manufacturing & Supplying of Fencing Pannel of Size 1.80 m x 1.20 m of Jali 25 mm x 25 mm welded to MS angle 40x40x5 mm with MS flats 20 mm and providing hold fasts 7 Nos of MS Flat of 32 x 3 mm thick 20 cm i/c cutting,welding,painting with red oxide paint complete in all respect and to the entire satisfaction of the Engineer -In- Charge in all leads and lifts.
Providing and fixing CI manhole cover with frame (Light duty-single seal pattern 500mm internal dia total weight of cover and fram to be not less than 38kg (weight of cover 23 kg and weight of frame 15kg) complete in all respect with in all leads and lifts.
Providing, laying, jointing & testing in trenches galvanised mild steel tube fittings (L) ( earth work in trenches to be measured and paid for separately) complete in all respect of following nominal bore within all leads & lifts.32mm dia
65mm dia
Providing and fixing of double flanged cast iron Sluice valve 65mm dia dia of Leader/Kirlosker/KSB make class PN-1.0 conforming to BIS: 14846 capable of with standing nominal seat test pressure 10kg/cm² with MS flanges complete in all respect.
Providing and fixing oxidised MS sliding door bolt 250x16mm complete in all respect.
Providing and fixing MS Cleat with nuts to rest a pintless complete in all respect.
Providing and fixing CI rungs complete in all respect.
Providing and fixing MS pipe railing complete in all respect.
Painting two coats (excluding priming coat) on new steel & other matel surfaces coat with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other foreign matter sand papering and stopping with paint with in all leads and lifts.
Dogra Construction Company Pvt Ltd
NEEM ENVIRO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .