PROVN OF FOUR TOILET BLOCKS TWO NEAR BLDG NO. P 91 AND TWO NEAR BLDG NO P 329 PARKING SHED NEAR PARI COMPLEX AND SPECIAL REPAIRS REPLACEMENT TO LT PANEL AND LT CABLE OF NARMADA PUMP HOUSE AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth n.exc 10 sqm on plan for foundation of pole, laying of cables etc in soft/disintegrated rock and getting out complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in hard and dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layer not exc 25 cm in soft/distengrated rock complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Excacation of post holes (or simllar holes) each n. exc 0.5cum, and getting out insoft/loose soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers not exceeding 25 cm in soft/disintegrated rock completed all as specified and as directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed. Note: Depth after punning shall be measured and paid separately.

M&L for filling under floor (except material) including spreading, levelling, watering and well ramming in layers n.exc. 15cm complete all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M&L for hard core of gauge exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/rammed to a true surface completed all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded aggregate for filling into subbase of floors etc. complete as specified and directed.

M&L PCC (1:4:8) C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete as in foundation filling and mass concrete all as completed as directed.

M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm stone aggregateas in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc. complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm stone aggregateas in slabs supported on walls, beams and columns etc. complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm stone aggregateas in chajjas complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm stone aggregateas in beams, cantilever, lintels s etc. complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm stone aggregateas in columns, pillars, piers etc. complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for providing cement concrete 1:2:4 of type B0 using 40mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl necessary form work and applying evenly a coat of blown type bitumen at the rte of 1.50 Kg per sqm and blinding with clean dry sand @0.05 cum per sqm complete all as specified and directed.

M&L for cutting chases, in stone concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing and making good, cutting exceeding 10cm girth complete all as specified and directed.

Supply and laying sub class old 'B' burnt bricks, laid as cable protection cover complete all as specified and directed.

Supply & laying sub class 'B' bricks for protection of cable and laid perpendicular to the trench all as specified & directed by Engineer-in-Charge.

M&L for granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs, pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams, or similar works vertical or to better for rough finished flat surfaces of concrete complete all as specified and directed.

Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for Use & Waste Form work for rough finished surfaces of concrete measured flat for Lintel Bends complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts piers, columns etc in square, rectangular or polygonal, rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n. exc 10 cm wide in rought finished surfaces of concrete complete all as specified and as directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing toframes, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F, butt hinges, 100 mm long extrucded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, complete all as specified and directed.

S&F, extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

M&L for TMT 10mm dia bar and over, as in stiffeners, cut to length, bent to shape required, including cranking, bending, hooking ends, binding with and incluing mild steel wire(annealed) not less than steel wire 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for slab, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed.

M&L for TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders of Grade-500d incl cutting, bending, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed0 not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-410, Gde E-250 quality B complete all as specified and directed.

M&L for rolled section as in framing for clading, stiffner, glazing and the like fixed with angle cleats and connecting plates, etc. in Fe-290 (Gde E-165) complete all as specified and directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. Note : Glazing/penelling measured and paid saperately in respective items.

S&F standard aluminium section powder coated any colour as approved for three track window/door frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.

S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for water proofing treatment to roof surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 litre/sqm eenly on roof surface and a coat of hot blown bitumen and 85/25 @ 1.2 Kg/sqm shall be applied on primed surface and laying 3mm thick APP modified polymeric membrane (weight not less than 3 Kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75mm and end overlap of 100mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 " 1.2 Kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint " 0.20 kg/sqm complete all as specified and directed .

M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base of floors etc. complete all as specified and directed.

M&L for 25mm Thick Cement Concrete Type B-1, 1:2:4 (20mm Graded Aggregate) complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface on walls etc.area exc 0.11 Sqm but n.exc 0.18 Sqm set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar 1:4 for laying wall tiles etc. complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for chequered cement concrete coloured tiles rubber moulded dcorative designed, size of all tiles as approved, with grey cement and pigments, set and jointed in neat cement slurry and pointed with cement and suitable coloured pigment to match the tiles in floors over 20 mm thick screed bed including and over 100m thick PCC 1:2:4 complete all as specified& directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpath parks, lawns ,drive ways or light traffic parking etc ,of required strength , thickness & size /shape ,made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand , compacting and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern ,finishing and sweeping extra sand complete all as specified and as directed.M/S Mehtab Tiles, M/S NITCO(NITCO), M/S Ultra Tiles (ULTRA).

M&L for 15mm thick cement plaster on fair faces of birck work or concrete surfaces on wall in CM 1:6 finished the plaster surface fair and even complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surface even and smooth complete all as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:4 on ceiling, soffits, chajja protection etc complete all as specified and directed.

M&L for 15mm thick screed bed in cement mortar 1:4 mixed with water proofing compound as per manufacturer instruction, finishing the surface should be even and fair without using extra cement complete all as speficed and direccted. Note : WPC shall be measured and paid separately.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish new plaster surface of wall complete all as specified and directed.

S&F, sheet glass 5.5 mm thick ordinary quality and glazing with oil putty complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F, GI tubing, 20mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

Supply only, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI pipe, 50mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping,including taking down old etc complete all as per specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

M&l for cutting of existing pipe of any size and insertion of new Tee of suitable size a per site requiremet including earth work in any kind of soil complete al as specified and directed.

M&L for cutting of road for laying of LT cable and making good to match with the existing using extra cement etc. complete all as specified and directed.

M&L for RCC NP3 150mm dia pipes laid on 150mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m - 1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with DFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional.

S&F on hume pipe septic tank for 10 user's including excavation in any type of soil , PCC 1:4:8 below foundation , vent shaft , connection etc complete all as specified and directed.

S&F on site LLDPE Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc. for 25 users complete all as specified and directed.

M&L for Soakage well of size 1.20M dia x 1.50 M effective depth .including excavation in any type of soil ,foundation in PCC 1:3:6 ,walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM ,RCC cover slab in M25 /SFRC cover ,interconnecting pipes of RCC /DWC complete filled with brick bats complete all as specified and directed. Note: Soakage well shall be executed as per Drg no. CEJZ/TD/68/15 Sheet 1/4 to 4/4 dated 10-8-15

M&L for soakage wels excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonry in cement mortar, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC compete filled with brick bats of size 1.80m dia and 3.00m effective depth complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I complete all as specified and directed.

S&F, pillar taps droop swan neck cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed

S&F, 20mm bore gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.

S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, 32mm bore bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-260 gms) complete all as specified and directed.

S&F, Sheet glass shelf assembly consisting of 5.5mm thick fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover in same colour etc. complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover in same colour etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.

S&F, 15mm bore stop/angle valves fancy type chromium plated screwed down, high pressure, with capston head, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. Model : Cat No. FLR-5053N of Jaguar or equivalent make as approved.

S&F, 15mm bib taps, chromium plated with capston head, screwed down,, screwed for iron pipe or for brass ferrule and fixed complete alla s specified and directed. Model : Cat No. FLR-8047N of Jaguar or equivalent make as approved.

S&F, PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.

S&F, Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down screwed for iron pipe or brass ferrule for 15mm bore of pipe complete all as specified and directed.

S&F, Aluminium peg set of six fixed with brass screw and wooden/plastic cleats.

S&F, oval type wash hand basing superiod quality 550 x 400mm size fitted and including suitable waste coupling with west pipe complete all as specified and directed.

S&F, 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed.

S&F, vitreous china urinal, Half stall type, white (excluding flushing pipe) incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, gratings and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and directed.

S&F, 40mm bore of pipe, low density polyethylene pipe (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilling or in floors etc. complete all as specified and directed.

S&F, PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge.

S&F, in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F, Soap dish, approximate size 160 x 160 x 90mm, fixed with screws complete all as specified and directed.

S&F, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

M&L for forming construction joints 30mm deepx10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for point wiring in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm (for phase, neutral & earth) single core including modular white cover plate with frame of suitable modules over modular metal flush box concealed type and earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note : Wiring shall be done by using proper colour coding.

(a) One light/fan/bell point controlled by one switch one way

(b) 6 Amp socket outlet on independent board complete all as specified.

(c) 6 Amp socket outlet on same board complete all as specified.

(d) 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC casing and capping using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC sheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

S&F, in repair, lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

S&F, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F modular socket outlet 2-3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 Core complete all as specified and directed.

Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core complete all as specified and directed.

Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core complete all as specified and directed.

Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 Core complete all as specified and directed.

Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 Core complete all as specified and directed.

S&F, PVC sheathed copper conductor cable of size 25 sqmm 3 core, 1100 volts grade, multistranded, connection from starter to pump set including run in suitable PVC conduit complete all as specified and directed.

S&F, modular Socket outlet 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F LED Adore Lamp 9W, B22 base 6500K CDL type complete all as directed by Engr-In-charge. Make: Havells/Crompton/Bajaj

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton

S&F, LED compact fitting/batten for single LED tube of 1x20W, 220 V AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED fitting mirror light decorative wall mounted with hanging bracket of 9/10W, 220V, AC decorative complete all as specified and directed.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F, in repair, Distribution Board SPN 4 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

Supply and fix of exhaust fan, 300 mm sweep, MS body with louvers, heavy duty, AC single phase, 230 volts including connection with 0.5 sqmm multistranded copper conductor flexible wire 3 core from ceiling rose, necessary opening in wall and fixing arrangement i.e anchor nut, bolt, washer, grouting complete all as specified and as directed.

Supply, install, testing and commissioning of Star delta starter control panel powder coated suitable for 60 HP centrifugal pump set including star-delta starter 60 HP, 100A TP MCCB, 25KA Volt meter, Ammeter, motor protection against over load, single phase preventer, instent over current phase sequence reversal, ON-OFF push bottons, R-Y-B indication lamp, contractors and cable connections with cable glands complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB/Panel using earth wire of 4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to Panel using earth strip of 25 x 4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m.

Shivaang Enterprise (BID ID -3370844)

ALBA AC AND REF SERVICES (BID ID -3371628)