Augmentation and Restoration of Chagallu cpws scheme pumping main from Bridge near Cheemalavagupalli cross to yadiki sump in Tadipatri Constituency

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)-200mm dia -8kg/cm^2

Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (2/3 Machinery and 1/3 manual) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications .The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and CED and including Overheads and contractors profit @ 13.615%. 200mm dia -8kg/cm^2 (2/3 Machinery and 1/3 manual)Trench size 0.80x1.10m

Supply and Delivery of 200mm dia 8mm thick MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton

Lowering, laying, Jointing testing & Commissioning of 200mm dia 8mm thick MS pipe conforming to IS 3589 and 1239 and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. Makes: As per list of recommended brands.

Supply and fixing of Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions including supoply of valve with dismantling joint, CI specials to suit the pressure class of main line, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @ 50 mm dia PN 1.6 Air valve on new 200 mm dia HDPE pipeline

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)-250mm dia -6kg/cm^2

Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (2/3 Machinery and 1/3 manual) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications .The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and CED and including Overheads and contractors profit @ 13.615%. 250mm dia -6kg/cm^2 Machinery and 1/3 manual)Trench size 0.90x1.20m

Supply and Delivery of 250mm dia 8mm thick MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton

Lowering, laying, Jointing testing & Commissioning of 250mm dia 8mm thick MS pipe conforming to IS 3589 and 1239 and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. Makes: As per list of recommended brands.

Supply and delivery of "Resilient Seated Soft Sealing" Sluice Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @ 250 mm dia PN 1.6 Sluice valve on new 250 mm dia HDPE pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Sluice Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @200 mm dia PN 1.6 Sluice valve on 200 mm dia AC pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Sluice Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @150 mm dia PN 1.6 Sluice valve on 140 mm dia PVC pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Sluice Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @100 mm dia PN 1.6 Sluice valve on 100 mm dia AC pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Scour Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, & excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts , The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage charges as specified in Technical specifications including Overheads and Contractor's profit @ 13.615% @ 150 mm dia PN 1.6 Scour valve on 250 mm dia HDPE pipeline

Supply and fixing of Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions including supoply of valve with dismantling joint, CI specials to suit the pressure class of main line, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @ 80 mm dia PN 1.6 Air valve on new 250 mm dia HDPE pipeline

Supply and fixing of Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions including supoply of valve with dismantling joint, CI specials to suit the pressure class of main line, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @ 80 mm dia PN 1.6 Air valve on existing 250 mm dia PVC pipeline

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)-110mm dia -6kg/cm^2

Construction of pipelines for water supply with HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation (2/3 Machinery and 1/3 manual) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications .The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and CED and including Overheads and contractors profit @ 13.615%. 200mm dia -8kg/cm^2 (2/3 Machinery and 1/3 manual)Trench size 0.80x1.10m

Supply and delivery of "Resilient Seated Soft Sealing" Sluice Valves with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @100 mm dia PN 1.6 Sluice valve on new 110 mm dia HDPE pipeline

Supply and fixing of Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions including supoply of valve with dismantling joint, CI specials to suit the pressure class of main line, excluding valve chamber & with 1200 mm dia RCC plain ended NP4 pipe confirming to BIS 458/2003 for valve chamber of height 1.20 mts including cost and conveyance of all materials and all labour chrges etc., complete but excluding GST and seignorage charges but including Overheads and contractor profit @ 13.615%. @ 40 mm dia PN 1.6 Air valve on new 110 mm dia HDPE pipeline

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc., Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm & including Overheads and contractor profit @ 13.615%

180 mm dia PVC casing pipe 10Kg/cm2 for inner casing. including Overheads and contractor profit @ 13.615%

Geological survey charges for drilling of bore well Inclusive of all charges including Overheads and contractor profit @ 13.615%

Cost of 3 core 6.00 sqmm cable wire inclusive all labour charges & including Overheads and contractor profit @ 13.615%

Cost of 100 mm dia GI pipe B Class including all Material and labour charges etc.complete& including Overheads and contractor profit @ 13.615%

90 mm dia PVC pipe 4 Kg/cm2 for cable wire casing. From source to panel board room & including Overheads and contractor profit @ 13.615%

Supply and Transportation of 15 HP 08-12 Stages, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Makes: As per list of recommended brands as category I & including Overheads and contractor profit @ 13.615%