Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹30.7 L
EMD Value
₹30,700
Closing Date
12 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Capital Project Division No.1, Gandhinagar
4202 Capital outlay on Education Sports, Arts and Culture - Renovation work in Principal Office, Government Engineering College, Sector-28, Gandhinagar.
361739
Tender Notice No.33/3 of 2026-27
Open
Civil - All
Works
Gandhinagar
7 documents required · 7 mandatory
₹1,500
Executive Engineer, Capital Project Division No.1, Gandhinagar.
₹30,700
2 Nov 2026
2 Nov 2026
2 Nov 2026
12 Nov 2026
2 Nov 2026
90 days
MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT
Quantities Estimated rates UNIT TOTAL AMOUNT
Quantities Estimated rates UNIT TOTAL AMOUNT
Item No Items of works
Estimated but In Figure In words Unit ACCORDING TO
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable
Fifty rupees and eleven paise
1 125.00 materilas and disposal of unserviceable materials with all lead and lift. 50.11 SMT
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats
architraves, holdfasts and other attachment etc. complete and stacking them within all One hundred ninety seven
lead and lift.(i) Not exceeding 3 Sq.M. in area. rupees and nine paise only
Drywall Partition of 100mm : Providing and fixing Dry wall partition of 100 mm thick stud
partition which includes one layer of tapered edge 12.5 mm thick (Conforming to EN
520:2004, Type D,F, I & R) is screw fixed with drywall Screws of 25 mm at 300mm
Centers to either side of 70 mm C stud (0.5mm thick having one flange of 34 mm and
another flange of 36mm made of GI steel) placed at 610 mm center to in 72 mm floor
and ceiling channel (0.5 mm thick have equal flanges of 32 mm mage of GI steel). which
is anchored to the floor & ture ceiling using suitable anchor fasteners or metal screws Two thousand sixteen rupees
with nylon plugs. The boards are to be fixed to the frame work with joints staggered to and seventy paise only
avoid leakage through joints. A rockwool of good quality is provided between the two
boards. Finally square and tapered edges of the boards are to be jointed and finished so
as to have flush look which includes filling and finishing with joiting compound and joint
paper tape.Make approved as per architect/EIC Selection.
Half brick masonry in common brunt clay building bricks having crushing strength not
less than 35Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse sand ) in foundation Six hundred twenty nine
and plinth (B) Conventional rupees and eighty paise only
Concrete Work : Providing and laying controlled cement concrete M.250 and curing
Six thousand seven hundred
complete including the cost of formwork and excluding reinforcement for reinforced
5 1.00 6705.97 five rupees and ninety seven CMT
TMT Bar(FE 550 D) : Providing TMT Bar FE 550 D reinforcement for R.C.C. work Ninety four rupees and ninety
including bending, binding and placing in position complete up to all floor level nine paise only
Window (Two Track) : Providing and fixing of Domal series Two Track Partly Fix and
Partly Sliding Window with colour anodized Section Frame of size 82.5 x 35 x 1.7 mm @
1.947 Kg / Rmt and Three Track Bottom/Top of size 80 x 45 x 1.5 mm @ 1.762 Kg / Rmt
and Slidding Shutter of size 65 x 27 x 1.5 mm @ 0.951 Kg / Rmt with 5mm thick Coated Four thousand eight hundred
7 4.00 Glass with Rubber gasket with help of Glazing Clip of size 26.7 x 15 x 1.2 mm and Inter 4816.59 sixteen rupees and fifty nine SMT
clip using with of size 38.7 x 28.5 x 1.4 mm and using hardware material, clot, bearing, paise only
lock and Labour etc. complete as approved by Engineer In Charge.
Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm
One thousand one hundred
x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with
8 1.00 1175.56 seventy five rupees and fifty SMT
mm thick frosted glass as details etc complete for Ventilation
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or
One hundred eighty five
half brick walls for interior plastering upto floor two level and finished even and smooth in
9 32.00 185.41 rupees and forty one paise SMT
(i) Cement mortar 1:3 (1 cement:3-sand)
Internal Plaster: Providing 10mm thick cement plaster in single coat on brick/concrete
walls for interior plastering upto floor two level and finished even and smooth in One hundred thirty five rupees
(i)Cement mortar 1:3 (1-cement:3-sand) and thirty paise only
Applying two coats of putty & two coats of primer of approved brand and manufacture on
new wall surface to give an even shade including thoroughly brushing the surface free Forty rupees and fifty nine
from mortar dropping and other foreign matter and sand papered smooth. paise only
Paint: Wall painting (two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated wall surface to give an even shade including throughly
Eighty three rupees and
12 531.00 brushing the surface free from mortar droppings and other foreign matter and sand 83.18 SMT
eighteen paise only
papered smooth.
Anti-Termite System:Providing and laying of permanent piping technology anti-termite
treatment before flooring work by installing LLDP (Low linear density polyethylene) tube
of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every 30 cm
interval in the tube, having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour
fixed by P-clips and nails. The LLDP pipe shall be installed at the entire periphery of the
building and at internal network of building at a depth of 20 to 200 mm under floor at
every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass
through a PVC elbow of minimum 32 mm ID at junction box of wall and floor level,
entering into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into One hundred thirty four rupees
junction box and the loops shall terminate in junction boxes & test every junction during and thirty three paise only
injecting chemicals for termite control treatment. The anti termite chemical Imidacloprid
30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure pump diluted
with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor
shall submit approved line plan for piping system and junction boxes dully approved by
Engineer-in-Charge with bond of 5 year warranty.(i)Anti Termite chemical injected area
(Chemical injecting incl. labour cost)
Repair of Concrete :
Step 1 : Remove all loose concrete with chisel and make the depth of repair uniform
Step2 : Clean the reinforcement with wire brush and rust remover Rebakleen to remove
all loose rust and apply one coat Zinc rich primer (Master Emaco P130). Step 3: Applying
Polymer modified mortar of average 25mm thickness using 1 part cement 3 part sand
Six hundred eighty two rupees
14 14.00 and 5.0 Littre Master Emaco SBR 2 of BASF mixed per 50kg cement to the chipped 682.78 SMT
and seventy eight paise only
concrete by trowelling using steel trowel complete. Step 4 : Apply one coat of water
based concrete curing compound (FOSROC make Concure WB) inclusive of Manpower,
Material and Equipment.work complete as per the instuction of EIC/Client/Architect. (At
Providing and fixing granite slab of 18mm thickness for stone jamb on wall, framing etc.
on the base of cement mortar 1:3 (1-cement : 3-sand) on new surface or fixing on
Two thousand nine hundred
existing location by adhesive material including dismentaling of existing location and
15 12.00 2956.11 fifty six rupees and eleven SMT
jointed with color cement slurry including finised with flush pointing & cleaning the
surface etc. To be laid or fixed as per the direction of the Engineer-in-Charge
PCC work:Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand
: 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost Four thousand one hundred
16 7.00 of formwork and reinforcement for reinforced concrete work in (B) Slabs, landing, 4183.94 eighty three rupees and ninety CMT
shelves, Balconis , Lintels, Beams, Girders and Cantilever upto floor two level. four paise only
Vitrified Flooring : Providing and laying Lapato / Glossy/Matt/Rustic finish Double
charged antiskid Vitrified tiles flooring using minimum 10 mm thick tiles as per
approved make list or selected by Architect , tile size (1200 mm X 600 mm, 800 x
800,900 x900, 600x600mm) including preparing base for leveling with 20mm thick
One thousand nine hundred
17 137.00 cement mortar 1:6 (1 cement : 6 coarse sand ) and jointed with 3mm to 5mm thick 1974.07 SMT
seventy four rupees and seven
laticrete grouting of approved shade and colour in proper line and level as per detailed
drawing / instruction and approval by architect.The rate shall be inclusive of protecting
the flooring by plaster of Paris and plastic and/or bubble top sheets. (At all floor area).
Dado Work : Providing and laying Lapato/ Matt /Glossy/ Non skid,/Rustic finish Double
Charged Vitrified tiles in dado using minimum 10 mm thick tiles approved by
architect /client (size 1200 mm X600mm) fixed in dado on 10 mm th. Cement plaster 1:3
(1 cement: 3 coarse sand) All surfaces must be dimensionally stable according to IS
1443-1972, level, cured, undamaged, compact,rigid,resistant, dry and free from any
One thousand six hundred
18 19.00 debonding agents tiles fixed by approved tile adhesive and all application shall be done 1620.43 SMT
twenty rupees and forty three
under instruction of manufacturer guideline and specification , and jointed with 3mm to
5mm thick epoxy grouting of approved shade and colour in proper line and level as per
detailed drawing / instruction all complete as per approved sample by Architect, drawings
and instruction of EIC. at all floors / all levels / all heights and all shapes .
Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using
water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender
channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x
mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at
Six hundred six rupees and
19 134.00 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at 606.95 SMT
ninety five paise only
edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting
cleat, joining compound top coat on ceiling incl.making necy.opening for light
fitting,diffuser etc comp as per detail drawing as directed
False ceiling of Aerolight light weight Calcium Silicate tiles : Providing and fixing False
ceiling of Aerolight light weight Calcium Silicate tiles Tegular Edge of size 595 x 595 x
15mm densified edge, having 100% humidity resistance and incombustible as per BS
476 part - 4 with thermal conductivity of 0.043 W/m0 kC, with NRC of .50 and approved
surface design to be placed in the Grid suspended Ceiling with border of Gypsum sheet .
Grid system made of Galvanised steel Section with main ''T'' runner 3.6 mt long with
size 38 x 24 x 0.30 mm spaced at 1200mm c/c and cross "T" of 1.2 mt long with size 24 Seven hundred eighty six
20 4.00 x 24x 0.30 mm spaced between main ''T" at 600mm c/c to form a grod of 600 x 1200 786.84 rupees and eighty four paise SMT
mm and secondary cross "T" of length 600 mm to be inter locked at middle of the 600 x only
1200 mm panel to form a grid of 600 x 600 mm. The wall angle of size 24x 24x 0.55 mm
to be fixed all around the perimeter of the wall. The main "T" runner to be suspended
from the ceiling using GI sloted cleats and 50mm long dash fasteners,4mm GI adjustable
rods with galvanised level clips with all labour and material and as directed by Engineer
Flush Door With Both Side Laminate - Providing and fixing 35 mm thick shutters for
Doors with Both side Laminate including Indian teak Wood Frame including black Five thousand nine hundred
21 13.00 enamelled iron oxidized fixtures and fastenings and necessary hardware such as 5910.14 ten rupees and fourteen paise SMT
hinges, door stopper, door closer, handle, mortice lock etc, complete. only
Wash basin table top counter - Toilet / Wash Area (Counter width- 600mm ) : Providing
& fixing two layers of wash basin counter,first layer using 25mm thick Kotastone of
approved shade and second layer using approved shade and sample of Mirror finish
Granite (Of Texture, shed, Colour and pattern as approved by EIC ), joined together
with 1:4 Cement mortar beding / approved tile adhesive , to true plane & level or to
Three thousand three hundred
22 1.00 slopes,or close jointed with cement slurry with pigment of matching shade and colour 3331.67 SMT
thirty one rupees and sixty
and finishing with the same, including dedo 2'6" ht , cutting kotah & tile as per required
seven paise only
shape & size to fit Wash basin,& 3" to 9" facia with moulding, nosing, chamfered front
edges, fixing, disposal of debris etc. finished as per design in detail drawing and
instruction of Architec/EIC.The sample mock shall be approved from Architect/EIC.
Water Proofing Treatment in Sunken Portion of WCs & Bathroom: Providing and laying
Water proofing treatment in sunken portion of WCS, Bathrooms etc. by applying cement
slurry mixed with water proofing cement compound consisting of applying: (a) First layer
of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound
@0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of
Five hundred twenty eight
23 4.00 slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 528.15 SMT
rupees and fifteen paise only
kg/sqm.This layer will be allowed to air cure for 4 hours followed with water curing for48
hours. The rate includes preparation of surface, treatment and sealing of all joints,
corners of pipes and masonry with polymer mixed slurry.
I.P.S Flooring: Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- coarse
sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with Three hundred sixty nine
a floating coat of neat cement. (B)50mm thick. rupees and thirteen paise only
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)
for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed
on the wall with the help of clamp at every two metre C/C or shall be concealed as Seventy two rupees and sixty
directed including necessary fittings etc. including testing of pipe and joints and fixing the five paise only
same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)
for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed
on the wall with the help of clamp at every two metre C/C or shall be concealed as Ninety one rupees and eighty
directed including necessary fittings etc. including testing of pipe and joints and fixing the four paise only
same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)
for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed
on the wall with the help of clamp at every two metre C/C or shall be concealed as One hundred forty eight rupees
directed including necessary fittings etc. including testing of pipe and joints and fixing the and twelve paise only
same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)
for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed
One hundred ninety five
on the wall with the help of clamp at every two metre C/C or shall be concealed as
28 1.00 195.67 rupees and sixty seven paise RMT
directed including necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
Providing laying and jointing in PVC SWR pipes IS 13592 for Drain - 75 mm dia
including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or shall be concelled as directed including
One hundred forty four rupees
29 3.00 necessary fittings etc. including testing of pipe and joints and fixing the same with 144.40 RMT
and forty paise only
adhesive solvent, including cost of all materials.[D] 75mm.To be fitted as per the
directions of Engineer-in-Charge.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene
pipes of the following outside Dia. Low densidy, complete with special falnge
Three hundred thirty nine
30 2.00 compression type fittings, wall clipsetc. including making good the wall ceiling and 339.05 RMT
rupees and five paise only
floor.(G)110 mm
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali
Five hundred ninety nine
of the following nominal diameter of self cleansing design with C.I scread down or hinged
31 1.00 599.64 rupees and sixty four paise Each
grating including the cost of cutting and making good the walls.
Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or One thousand one hundred
32 1.00 equivelent and as per directed by engineer incharge. (A) 25mm dia. 1130.14 thirty rupees and fourteen Each
Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or Four thousand two hundred
33 1.00 equivelent and as per directed by engineer incharge. (A) 50mm dia. 4235.99 thirty five rupees and ninety Each
nine paise only
Wall Mounting/Floor Mounting European WC : Providing and fixing wash down wall
mounting/ floor mounting EWC of approved shade, conforming to Pattern 2 of IS:
(Part -II), with SWR Self it Soil PVC pipe and plug, rimeless having siphonic flush bend
as per specifications; glazed vitreous / Colored European Water Closet with Concealed
Cistern Dual Flush System (IS-2326) , with grouting the CI chair inside the floor/wall, Twenty thousand nine hundred
34 1.00 rubber gaskets, connecting PVC 110mm dia soil pipe with PVC coupling, nuts, traps, 20965.08 sixty five rupees and eight Each
mounting cistern on WC., and solid Varity heavy duty plastic seat cover as per IS-2548, paise only
of approved make; cutting and making jari work etc. complete.[Make :Jaquar SLS-WHT-
6953BIPPSM, [Including Seat cover / Outlet Gasket / Inlet Gasket].
Providing and fixing glazed vitreous Wash Basin Round/Ovel/Rectangular Over-Counter,
of 450 mm dia./Size, with supporting in stone flooring, 1 no, Waste Pipe,1.2m Flexible Seven thousand eight hundred
35 1.00 Pipe [1No] and waste coupling. Colour/pattern should be approved by Architect or 7840.13 forty rupees and thirteen paise Each
Engineer Incharge Etc complete. [Jaquar CNS-WHT-905] only
Health Faucet: Providing and Fixing Health Faucet ABS body with wall hook and
meter crome plated PVC hose pipe of approved quality and conforming to One thousand seven hundred
36 1.00 Manufacturers Standards, to the wall surface with necessary fixture / accessories 1701.60 one rupees and sixty paise Each
,necessary holes and grooves work and making it well finished etc. complete as per only
drawing and details.
Two Way Bib Cock: Providing ,fixing ,testing commissioning and keeping in good
Three thousand four hundred
condition until project completion of 15mm dia two way bib cock with all fittings complete
37 1.00 3455.46 fifty five rupees and forty six Each
as per specification/drawings and details.
Angular cock W/O flange: Providing, fixing and testing and commissioning of 15mm CP
Two thousand one hundred
brass angle valve with CP copper connecting pipe 375 mm long along with nuts, washer
38 1.00 2148.78 forty eight rupees and seventy Each
and brass flange complete as per drawing and details(for wash basin control valves)
eight paise only
Pillar cock: Providing and fixing brass pillar tap, capstan head, screw down high pressure
Three thousand seven
with screws, shanks and back nuts. (i) 15mm dia. To be fixed as per the instructions of
39 1.00 3716.80 hundred sixteen rupees and Each
the Engineer-in-Charge.
eighty paise only
Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Two hundred fourteen rupees
polished bright. (ii) 20mm dia and eighty one paise only
Providing and fixing toilet paper holder.(A) C.P. Brass Four hundred twenty seven
41 1.00 427.99 rupees and ninety nine paise Each
Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail
Five hundred eighty six rupees
42 1.00 complete mixed to wooden plug with C.P. brass screws. 586.09 Each
and nine paise only
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to
Six hundred sixteen rupees
43 1.00 wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 616.42 Each
and forty two paise only
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted
Three thousand one hundred
on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass
44 1.00 3182.99 eighty two rupees and ninety SMT
screws and washers.
nine paise only
Providing and Fixing Soap Dispenser in Polished chrome of approved make and
conforming to Manufacturers Standards. As per approved and selection by One thousand nine hundred
45 1.00 architect/consultant make UFC JAQUEL-soap dish -113 or equivalent as approved 1945.51 forty five rupees and fifty one Each
and selection by architect. paise only
Providing and fixing PVC SWR Vent Cowl 110 mm dia with mesh at the exterior surface
to Avoid Birds Entering For Bathroom/Office/Kitchen Ventilation/Exhaust Fan of
Twenty six rupees and four
46 3.00 approved company at the output for the toilets. It should be assembled and fixed as per 26.04 Each
the direction of the Engineer-in-Charge.
High Back Revolving Chair: Providing and fixing High Back Revolving Chair of avg
dimension 770x710x1280 mm (WxDxH) having artificial leather upholster finish and shall Twenty five thousand five
be as per selection by Engineer In Charge / Architect. hundred fifty three rupees only
Medium Back Revolving Chair: Providing and fixing Medium Back Revolving Chair with
Seat Sliding of avg dimension 670x710x1150 mm (WxDxH) having leather upholster Twelve thousand seven
48 20.00 finish and shall be selected by Engineer In Charge / Architect /Department shall be of as 12776.50 hundred seventy six rupees Each
per selection by Engineer In Charge / Architect. and fifty paise only
Wooden chairs - Providing and placing Decorative chair with seasoned teak wood frame
and armrest, upholstered with approved shade fabric over high-density PU foam cushion Fourteen thousand five
49 6.00 on seat and back, including PU polish, complete in all respects as per approved design 14518.75 hundred eighteen rupees and Each
and direction of Engineer-in-Charge seventy five paise only
Providing and fixing Table of Any Size made from 36 mm thick Plywood Using 18/19 mm
Plywood, laminated with 1.0mm thick lamination sheet on top & front Side and Inside
Eleven thousand ten rupees
50 10.00 lamination with hot melt glue as per instructions of Engineer In Charge. 11010.69 SMT
and sixty nine paise only
Providing & Placing in position Conference table of size required dimensions with
modesty panel having Table top of 1mm Laminate Surface Finish should be Glossy
Finish, Colour: White and having 1mm thick Laminate on sides edge and inside area
Ten thousand forty six rupees
51 8.00 made from 18mm BWR calibrated plywood of standard make like Century, Greenlam, 10046.35 SMT
and thirty five paise only
Marine, Greenply, Saint-Gobain, Sainik etc, teakwood batten complet as per instruction
given by engineer in charge/Architect.
Providing & Placing in position Corner table of size 600 X 600 X 450 mm with Varnish
Polish finish made from Solid teakwood and Table Top made from Teakwood/Glass Six thousand nine hundred
complet as per instruction given by engineer in charge/Architect. sixty nine rupees only
Providing & Placing in position Center table of size 900 X 600 X 450 mm with Varnish
Nine thousand eight hundred
Polish finish made from Solid teakwood Table Top made from Teakwood/Glass complet
53 1.00 9872.75 seventy two rupees and Each
as per instruction given by engineer in charge/Architect.
seventy five paise only
Providing and fixing in position storage unit of any height and depth (450/600 mm),
fabricated from 18/19 mm BWR grade calibrated plywood of approved make, with
shutters made from 12 mm plywood or 6 mm thick glass shutters (as specified),
complete with openable arrangement. All external and internal surfaces shall be finished Eleven thousand six hundred
54 17.00 with 1 mm laminate, with batten patti on exposed edges finished in PU polish and 2 mm 11639.05 thirty nine rupees and five SMT
PVC edge banding. The unit shall include hinges, drawer channels (35 kg capacity), paise only
locks, and all necessary hardware, complete as per approved drawings and instructions
of Engineer-in-Charge/Architect.
Providing and fixing single-seater sofa of size 900 × 610 × 770 mm, upholstered in fabric
/ rexine finish, constructed with tropical seasoned hardwood framework and particle
board. The legs shall be MDF with wooden fascia finished in melamine coating.
Upholstery shall be fabric / rexine with nylon-polyester stitching. Seat and back Twenty five thousand five
cushioning shall consist of 28D polyurethane slab stock foam with 1-inch Recron layer, hundred fifty three rupees only
fixed using approved bonding solution and bolting, complete in all respects.
Providing and fixing Two Seated sofa of size 1500x610x770mm, upholstered in fabric /
rexine finish, constructed with tropical seasoned hardwood framework and particle board.
The legs shall be MDF with wooden fascia finished in melamine coating. Upholstery shall
be fabric / rexine with nylon-polyester stitching. Seat and back cushioning shall consist of Thirty seven thousand one
28D polyurethane slab stock foam with 1-inch Recron layer, fixed using approved hundred sixty eight rupees only
bonding solution and bolting, complete in all respects.
Providing and fixing Three Seated sofa of size 2100x610x770mm, upholstered in fabric
/ rexine finish, constructed with tropical seasoned hardwood framework and particle
board. The legs shall be MDF with wooden fascia finished in melamine coating.
Upholstery shall be fabric / rexine with nylon-polyester stitching. Seat and back Fifty one thousand one
cushioning shall consist of 28D polyurethane slab stock foam with 1-inch Recron layer, hundred six rupees only
fixed using approved bonding solution and bolting, complete in all respects.
Signage :Manufacturing, supply, arrangement and keeping in good condition until project
completion SS/Wooden/MDF signage using SS 304 grade/Plywood/MDF material brush
finish 1.5mm thick sheet with letter, numbers, graphic, symbol etc made by acid etching
process with duco paint/ powder coating as per drawings and instruction of the architect.
Sixteen thousand two hundred
58 0.50 All required CNC cutting/ laser cutting shall be carried out as per drawing. The plate shall 16261.00 SMT
sixty one rupees only
be fixed on brick/ RCC wall/ ply/ cement board/ furniture/ door with the necessary fixing
hardware like SS stud, fastner, self adhesive double side tape etc. complete for all floors
and all height. The rate shall be inclusive of all material, laour, hardware scaffolding etc.
Laminet Paneling:
Providing and fixing laminet sheet of 1 mm thickness of any height as required to be
fitted at all heights/all levels including necessary arrangement like plywood or similar etc One thousand two hundred
59 90.00 with the help of fixtures such as bonding agents such as fevicols, screws of any diameter 1291.44 ninety one rupees and forty SMT
or similar complete of design provided by the architect and should be installed as per the four paise only
directions provided by the Engineer-in-Charge.
Slatted Panelling : Providing and fixing and maintaining till project completion
Manufacturing, supply, arrangement and keeping in good condition until project
completion slatted panels of 12 mm thickness of any height as required to be fitted at all
Three thousand six hundred
heights/all levels with necessary arrangement like plywood or similar etc with the help of
60 33.00 3624.34 twenty four rupees and thirty SMT
fixtures such as bonding agents such as fevicols, screws of any diameter or similar
four paise only
complete of design provided by the architect and should be installed as per the directions
provided by the Engineer-in-Charge.
Polyester Fiber Panelling : Providing and Fixing Polyster fiber sheet on Base Layer of
plywood sheet with necessary Glue, screw etc. required accessories with all labour,
Three thousand nineteen
61 60.00 scaffolding and support system, as per selection of Architect and in the direction of 3019.90 SMT
rupees and ninety paise only
Engineer-in-Charge.
Skirting: Providing and fixing PVC skirting of approved quality, colour and shade,
manufactured from rigid PVC sheet, 15mm thickness (or as specified), including cutting,
shaping, mitring at corners, and fixing with approved adhesive/mechanical fasteners to Four hundred twenty one
the wall surface to obtain a smooth and even finish. complete of design provided by the rupees and five paise only
architect and should be installed as per the directions provided by the Engineer-in-
Canvas Painting : Supply and execution of decorative Printed painting on Canvas using
acrylic colours and fixed on wooden and glass frames using traditional or custom Four thousand nine hundred
63 7.00 designs as per approved patterns. Includes surface preparation, carving, finishing, 4999.10 ninety nine rupees and ten SMT
sealing, and protective coating if required. Complete in all respects paise only
Zebra Roller blind : Providing and fixing Zebra blind roller curtain with superior quality
Four thousand one hundred
Acmeda Mechanism including all necessaries fitting like breaket chain etc. complete as
64 33.00 4181.40 eighty one rupees and forty SMT
per instruciton of Engineer in charge.
Providing P.O.P. Punning upto 20 mm thick incl. Jali with groove for proper bonding with Six hundred fifty two rupees
wall & leveling in line & level etc. Complet as per tender or equivalent and seventy six paise only
Providing and fixing Open box type storage of 0.45mt depth using 12mm plywood & Seven thousand sixty one
66 10.00 1.0mm lamination sheet with finishing as directed by consultant etc. completed. 7061.87 rupees and eighty seven paise SMT
Providing and fixing Fully glazed toughened glass door of 12mm thick frosted glass,
including cutting, edge polishing, and machine-beveled edges. Door to be fitted with
Four thousand one hundred
patch fittings (top, bottom, lock, and floor spring), SS 304 grade hardware, and 600mm C-
67 2.00 4163.73 sixty three rupees and seventy SMT
type SS handle. All fittings as per IS: 12823. as per approved design and direction of
three paise only
Engineer-in-Charge.
Providing and fixing view cutter / decorative partition comprising 18–19 mm thick BWR
plywood framework, finished with approved 1.0 mm thick laminate approved make,
shade and texture, with vertical decorative wooden fluted/slatted members at required
spacing. Upper portion shall be provided with clear toughened glass, 6 mm thick, Three thousand nineteen
securely fixed in wooden frame with suitable beading, grooves, screws and fittings. rupees and ninety paise only
Complete including cutting, fabrication, edge finishing, polishing/lamination, fixing,
necessary hardware, supports and all labour, materials and scaffolding, complete in all
respects as directed by Engineer-in-Charge.
Replacing Old u/s by new Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLSH PVC insulated multi
strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular
type switch / bell push & accessories and earth continuity of following type, erected on
PVC / Metallic/Wooden box, single mounting base frame covered with
Six hundred eleven rupees
69 39.00 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe 611.91 pts
and ninety one paise only
erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling
complete Cat. III NOTE:-3 For use of FRLSH Copper wires in place of FRLS PVC wires
Replacing Old u/s by new Point wiring for Tissino / Modular secondary light point with 2-
1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS
PVC insulated multi strand copper wires, in below type of pipe to be erected complete
with earth continuity and necessary connection with primary light with accessories
erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Two hundred eleven rupees
Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / and four paise only
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete NOTE:-3 For use of FRLSH Copper wires in
place of FRLS PVC wires add 5% in Item No 1-1-1 to 1-2-5 & 1-4-1,1-4-2 & 1-4-7.
Replacing Old u/s by new Point wiring for FAN with 2-1.5 sq.mm & earth wire of
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLSH PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular
type switch and hum free EME step type electronic fan regulator mounted and
accessories with earth continuity of following type erected on PVC / Metallic/Wooden
Eight hundred forty nine
71 14.00 box, single mounting base frame covered with textured/metallic/white front plate 849.46 pts
rupees and forty six paise only
modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat. III NOTE:-3 For use of FRLSH Copper
wires in place of FRLS PVC wires add 5% in Item No 1-1-1 to 1-2-5 & 1-4-1,1-4-2 & 1-4-
Replacing Old u/s by new Point wiring for on board Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base Three hundred nine rupees
frame covered with textured / metallic/white front plate modules erected on / in wall / and six paise only
ceiling with following type accessories Cat. III
Replacing Old u/s by new Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting base frame covered with
One hundred fifty one rupees
73 20.00 textured / metallic/white front plate , modules erected with necessary connections as per 151.50 nos
and fifty paise only
site situation directed by Engineer In charge. (1)One No. SP 6 Amp. Cat.III
Replacing Old u/s by new Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting base frame covered with
One hundred fifty one rupees
74 20.00 textured / metallic/white front plate , modules erected with necessary connections as per 151.50 nos
and fifty paise only
site situation directed by Engineer In charge. (2) One No 5 pin plug Cat.III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured / metallic/white One hundred sixty rupees and
front plate , modules erected with necessary connections as per site situation directed fifty nine paise only
by Engineer In charge. (4) TV Co-axial Socket outlet Cat.III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured / metallic/white One hundred sixty rupees and
front plate , modules erected with necessary connections as per site situation directed fifty nine paise only
by Engineer In charge. (8) Computer RJ-45 socket Cat.III
Replacing Old u/s by new Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting base frame covered with
Twenty five rupees and twenty
77 12.00 textured / metallic/white front plate , modules erected with necessary connections as per 25.25 nos
five paise only
site situation directed by Engineer In charge. (7) Blank Plate Single Cat.III
Replacing Old u/s by new Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting base frame covered with
One hundred eighty rupees
78 13.00 textured / metallic/white front plate , modules erected with necessary connections as per 180.79 nos
and seventy nine paise only
site situation directed by Engineer In charge. (9) 16 Amp. SP one way switch Cat.III
Replacing Old u/s by new Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting base frame covered with One hundred ninety nine
79 13.00 textured / metallic/white front plate , modules erected with necessary connections as per 199.98 rupees and ninety eight paise nos
site situation directed by Engineer In charge. (10) 6/16Amp. Universal socket Cat.III only
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Twenty four rupees and twenty
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in four paise only
approved manner as directed (a)20 mm
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, Seventeen rupees and
PVC bushes, Check-nuts etc. complete of following sizes. (1) 20 mm seventeen paise only
Replacing Old u/s by new Providing and erecting Mains with 1.1 KV grade FRLSH PVC
insulated ISI marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLSH
Eighty two rupees and seventy
82 65.00 PVC insulated stranded wire of green colour for earth continuity of following size (A) 82.72 mtrs
With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm NOTE:-3
For use of FRLSH Copper wires in place of FRLS PVC wires add 5% in Item No 1-1-1 to
Replacing Old u/s by new Providing and erecting Mains with 1.1 KV grade FRLSH PVC
insulated ISI marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLSH
One hundred nine rupees and
83 149.00 PVC insulated stranded wire of green colour for earth continuity of following size (A) With 109.23 mtrs
twenty three paise only
medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. Mm NOTE:-3 For use
of FRLSH Copper wires in place of FRLS PVC wires add 5% in Item No 1-1-1 to 1-2-5 &
Replacing Old u/s by new Providing and erecting Mains with 1.1 KV grade FRLSH PVC
insulated ISI marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLSH PVC insulated One hundred forty seven
84 105.00 stranded wire of green colour for earth continuity of following size (A) With medium 147.41 rupees and forty one paise mtrs
class Rigid PVC pipe and accessories (a) 2 wire 4 sq. Mm NOTE:-3 For use of FRLSH only
Copper wires in place of FRLS PVC wires add 5% in Item No 1-1-1 to 1-2-5 & 1-4-1,1-4-
Providing and erecting Mains with 1.1 KV grade FRLSH PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLSH PVC insulated stranded wire of green
Five hundred fifty eight rupees
85 50.00 colour for earth continuity of following size (A) With medium class Rigid PVC pipe and 558.88 mtrs
and eighty eight paise only
accessories (i) 4 wire 10 sq. mm
(use earth wire of 4 sq.mm ) NOTE:-3 For use of FRLSH Copper wires in place of
FRLS PVC wires add 5% in Item No 1-1-1 to 1-2-5 & 1-4-1,1-4-2 & 1-4-7.
Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI
Fifty eight rupees and fifty
86 10.00 marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 core 58.58 mtrs
eight paise only
round PVC sheathed
Supplying & erecting approved make LAN cable of following size in existing pipe as per Forty seven rupees and forty
direction [C] CAT - 6 seven paise only
Providing & Erecting approved make following size of TV Co-axial flexible cable
comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Thirty nine rupees and thirty
conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall nine paise only
sheathed with black PVC insulation. (b) RG-6
Providing and erecting Decorative call bell Ting-tong box type 250 volts complete Seventy one rupees and
erected seventy one paise only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,
Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K, One hundred sixty five rupees
Luminaire efficacy> 85 lumens/watt ,LED and sixty four paise only
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Tube Light with integral driver (i) 5-10
Watts, Surge-2 kV, IP-20, conventional 1 to 2 feetCat-lll
Replacing Old u/s by new Supplying and erecting LED indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure
die cast powder coated and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K, Five hundred eighty nine
91 50.00 Luminaire efficacy> 85 lumens/watt , 589.84 rupees and eighty four paise nos
LED driver efficiency > 85 % only
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded mounting clips
complete.IP20 (iii) 16-20 watts, Surge-2 kV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser housed in aluminium casted body
with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K, Two hundred twenty rupees
Luminaire efficacy> 85 lumens/watt , and eighteen paise only
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (D) LED Strip Light (ii) Minimum 7.2W -
240 LED per meter,(2 wire, IP-65) with non integral suitable Driver completeCat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser housed in aluminium casted body
with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %, Nine hundred sixty six rupees
and fifty seven paise only
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (I) Adjustable spot light with COB led
having aluminium reflector of following wattage (ii) 12 Watts Cat-lll
Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate One hundred twenty three
94 24.00 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 123.22 rupees and twenty two paise each
confirming to IS 8828/1996 with ISI Mark Cat.III only
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having
Eight hundred eleven rupees
95 1.00 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 811.03 Nos
and three paise only
(c)63 Amp. Cat.III
Providing and erecting Sheet Steel powder coated MCB distribution board - flush /
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS
8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs
should be used of same company of MCB to be used) suitable for (B) three phase Four thousand ninety five
96 1.00 incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) 4095.35 rupees and thirty five paise nos
sheet steel double door (IP-43) (iii)8 way Note:- Enclosure Should be used of same only
company of MCB or MCB DP or RCCB For Item No 3-11-1 to 3-11-4. ADD 20% more for
concealed errection of distribution board. 3-11- 5 to 3-11-8.
Providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Two thousand four hundred
97 3.00 operation on single phase 240 V,50Hz. having characteristic of quick action & tripping 2458.34 fifty eight rupees and thirty four nos
with all advance feature & do not incorporate any electronic component. for following paise only
Max. rating erected as directed (ii) 40Amps. DP Cat. III
Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 1.626mm. Seventy seven rupees and
seventy seven paise only
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing
Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion
free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection
terminal dia of 12mm with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following type of applications with
chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped and signed by agency Four thousand five hundred
99 1.00 and officer Incharge has to ensure the value of earthing resistane mentioned in test 4591.46 ninety one rupees and forty six nos
Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- paise only
Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound
should be capable to retain moisture for long time Necessary test report must be
submitted by Agency. (a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Replacing Old u/s by new Providing & erecting Approved make Power Saving 45 -
Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz One thousand nine hundred
100 14.00 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 1948.29 forty eight rupees and twenty nos
cm. down rod erected with earthing.(Make shall be approved by Engineer in charge)) nine paise only
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars
up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty One hundred eight rupees and
PVC box complete erected concealed in Ceiling with necessary finishing. seven paise only
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Eighteen rupees and eighteen
Replacing Old u/s by new Supplying & erecting approved make low noise decorative One thousand three hundred
103 2.00 exhaust fan having square frame ABS body with inbuilt lowers & square frame. 200mm 1366.53 sixty six rupees and fifty three nos
with 1350RPM Cat.II paise only
Providing and erecting Inverter based approved make split air-conditioning unit
consisting of condensing unit with variable speed fan motor, inverter type hermetically
sealed rotary compressor with accessories etc. duly connected separately erected
Seventy nine thousand six
evaporating unit and blower motor with its accessories by means of extra supplied
104 2.00 79620.32 hundred twenty rupees and nos
proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly
thirty two paise only
green gas charging and 15A plug top & Remote Control & MS Stand) with necessary
core cutting. (2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (C) for 1.7 to 2 ton
capacity-Premium Cat.
Supplying and erecting insulated pair of soft copper tubing open or concealed including One thousand one hundred
105 45.00 power and control cable,necessary PVC drain pipes for Split/Cassette AC machine up to 1158.47 fifty eight rupees and forty Rmt.
4 TR capacity seven paise only
Thirty lakh sixty five thousand three hundred eighty two rupees and seventy five paise only
I / We am / willing to carry out the work at __________ above / below __________ percentage (should be written in figures and words) above / below the estimated amount mentioned above. Amount of my/our tender works
Estimated Amount put to Estimated Amount put to
Deduct _________ % Below. Add _________ % Above.
Notes For Civil Work :-
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items
Deputy Executive Engineer Executive Enegineer
CP Electrical Sub Division No 21 CP Electrical Division
Gandhinagar Gandhinagar
Deputy Executive Engineer Executive Engineer
Dated signature of the
Capital Project sub Division 01 Capital Project Division
Gandhinagar Gandhinagar
Credit of Dismental Material Items
Quantities Estimated rates UNIT TOTAL AMOUNT
Quantities Estimated rates UNIT TOTAL AMOUNT
Item No Items of works
Estimated but In Figure In words Unit ACCORDING TO
Cost Of Old & u/s Light Pts. Seventeen rupees and ninety
Cost Of Old & u/s Secondary Pts. Four rupees and eighty paise
Cost Of Old & u/s Fan Pts. Twenty six rupees and ninety
Cost Of Old & u/s Looped Plug Ten rupees and fifty two paise
Cost Of Old & u/s 6A Switch Five rupees and sixty paise
Cost Of Old & u/s 6A Plug Five rupees and sixty paise
7 12.00 Cost Of Old & u/s Blank Plate 1.00 One rupee only Nos.
Cost Of Old & u/s 16A Switch Six rupees and seventy six
Cost Of Old & u/s 16A Plug Seven rupees and fifty two
Cost Of Old & u/s 1.5 Mains
10 45.00 6.30 Six rupees and thirty paise only Mtr.
Cost Of Old & u/s 2.5 Mains Eight rupees and fifty five
Cost Of Old & u/s 4 Mains Eleven rupees and seventy
nine paise only
13 24.00 Cost Of Old & u/s Downlight 16-20W 22.00 Twenty two rupees only Nos.
Cost Of Old & u/s 1200mm Ceiling fan One hundred sixty nine rupees
and two paise only
Cost Of Old & u/s 200mm Ex. Fan One hundred seventeen
15 1.00 117.18 rupees and eighteen paise Nos.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 NIT.pdf
02 Notice Inviting Tender.pdf
03 Additional Instructions.pdf
04 SBD Form.pdf
05 Eligiblitiy Criteria.pdf
06 Special Condition.pdf
07 Schedule B.pdf
08 Index of Specifiction.pdf
09 Specifiction Details.pdf
11 Testing Schedule of Materials.pdf
10 Make List.pdf
12 MOU Electrical Work 1 300 Stamp.pdf
13 Nomination for Electrical Contractor.pdf
14 Certificate Approved Makes of Materials.pdf
15 Make List of Materials.pdf
16 GR.pdf
18 Electrical Specification Booklet.pdf
17 GR - converted (1).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .