Providing repairs / replacement of electrical installations works in AE(SKVS) area in ESD-SBH, Tirupati for the year 2026-27

Supply and Fixing of ISI mark 20mm outer dia medium grade (1.55mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in walls of brick building duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and for surface wiring on chromium plated metallic base saddles on ceiling of roof / existing brick building walls, columns, beams, roofs / trusses / channel etc., and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in walls of brick building duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and for surface wiring on chromium plated metallic base saddles on ceiling of roof / existing brick building walls, columns, beams, roofs / trusses / channel etc., and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp flush type switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.rade-A: Wire Makes:Finolex / RRKabel / Havells / Polycab / L&T / KEIFlush type switch makes: Anchor / Goldmedal (olive) / GM (G Home)/ Havells (Reo)

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp flush type switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A: Wire Makes:Finolex / RRKabel / Havells / Polycab / L&T / KEIFlush type switch makes: Anchor / Goldmedal (olive) / GM (G Home) / Havells (Reo)

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non- Residential Buildings.Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with Jumbo ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 2 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp flush type switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Flush Type Switch Makes: Anchor /Gold Medal (Olive) / GM (G Home) / Havells (Reo)

Supply and wiring with 2 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / old Medal / Havells /ABB / Indo Asian / GM / HPL

Supply and run of 2 wire of 14/0.3mm (1.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel /Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 6 Amp 1 Way Flush Type Bell Push on the existing switch board and giving connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 6 Amps 1 Way Flush type Switch on the existing switch board and giving connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 16 Amp Flush Type Switch on the existing switch board and giving connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 6 Amp 3/2 Pin Flush Type Socket with shutter on the existing switch board and giving connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 16 Amp Flush Type 3 pin Socket with shutter on the existing switch board and giving connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 5/8" Angle / Batten Holder on the existing junction boxes/ T.W Board etc. and giving necessary connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Deluxe Fan Regulator Rotary step 100W on the existing switch board and giving necessary connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Buzzer on the existing junction boxes, T.W Board etc., and giving necessary connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Ding Dong Bell on the existing junction boxes, T.W Board etc., and giving necessary connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Remote Bell on the existing switch board and giving necessary connections.Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree – Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 20 Amps 1 Way 1 Module Modular Switch with Neon Indicator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor /GM Four-Five

Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Amps 1 way Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete.Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixin of 6 Amps 3 / 2 pin Mini Modular Socket with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete.Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc.,complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps (2 in one) Mini Modular Switch & Socket combined with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete.ake: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of Mini Modular Stepped type Electronic Regulator with cover frame on existing Switch board and giving necessary connections including all labour charges etc., complete.Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Fixing of given Tube light luminaire / PL fitting on wall / Ceiling / Trusses / Channels on PVC/ TW round blocks / Epoxy insulator / 3"x2"x1" TW reaper with all accessories, labour charges and giving necessary connections.

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., Complete.

Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with Anchor fasteners of size 12mm x 75mm pin type including connections etc., complete.

Supply and fixing of 6A, 3-Plate Pilot Ceiling Rose on the existing junction boxes, T.W Board etc., and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 125 Amp TP & N SDFU Switch as per IS:13947 with sheet steel enclosure without fuse units on wall etc., complete. Grade-A: Make: L&T / C&S / ABB / Siemens / GE

Supply and fixing of 100 Amp 415V F.P. Changeover switch (Off load ) as per IS:13947 in sheet steel enclosure with all accessories etc., complete on existing T.W.Board & walls etc. Grade-A: Makes: HPL / Havells / Standard / Indo Asian / C&S

Supply and fixing of 1 No of 125 Amp 4 pole Changeover switch (ON-LOAD) as per IS:13947 open type with all accessories etc., complete In existing Panel Board. Grade-A: Make: L&T / Havells / Standard / Indo Asian / C&S / Socomec

Supply of 100 A to 160 A HRC fuse links (DIN/Bolted Type) as per IS:13703. Makes: L&T / Siemens / Standard / Havells / HPL / Indo Asian / C&S / GE

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STAD

Supply and fixing of 12way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way VTPN D.Bs suitable for accomodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing with IP-43 protection as per IS 8623; IS 13032; IEC 61439-3. (Metal door) firmly on the surface of the wall etc., complete. [Excluding Incomer & Outgoings] Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 32 Amp DP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and Fixing of 125A 3 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25KA, with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 160A 3 Pole MCCB, Adjustable Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply & fixing of 1" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angle of 35x35x5mm having length 20Cm (grouted portion of MS angles into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges for stem pipe including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.

Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.

Painting to the existing 9 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make: As approved in Civil SSR-2020-21

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply of 2.5 Sq.mm x 3 Core Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel / Polycab / Havells / KEI / Gloster.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 12''x8''x2 1/2'' with max. 2 joints of Surface T.W. boards on the wall fixed with 12"x8" laminated sheet 2.8 mm thick ISI mark laminated sheet of white or approved colour on top fixed with brass screws, cup washers, out side board should be polished with two coats of French polish with fine finishing with bottom plank 1/2'' thickness and frame of 3/4'' thick planks.

Supply and fixing of 8''x6''x2 1/2'' with max. 1 joint of Surface T.W. boards on the wall fixed with 8"x6" laminated sheet 3 mm thick ISI mark laminated sheet of white or approved colour on top fixed with brass screws, cup washers, out side board should be polished with two coats of French polish with fine finishing with bottom plank 1/2'' thickness and frame of 1'' thick planks.

Supply and fixing of 4"x4" of 3 mm thick laminated sheet I.S.I Mark of white or approved colour suitable for Surface existing T.W. Board with brass screws, cup washers etc.

Supply and fixing of 18.5''x15.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc.,Complete.

Supply and fixing of 15.5''x12.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc.,Complete.

Supply and fixing of 8.5''x6.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc.,Complete.

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 1.5 Mtrs length after excavating an earth pit of size1.2 m X 0.9 m X 1.55 m with the following specification: (a) the GI pipe shall be inserted into the Ground for 1.75 Mtr below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (c) The top 0.25 m of GI pipe shall be exposed into inspection chamber of Hum pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the 25 X 6 mm GI flat with bolts, nuts & washers, (d) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (e) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification: (a) The Earth Electrodes, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 2 meter long, galvanized, including 1 bag (25Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.

b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts & washers.

(e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Supply of Earth Life Compound as per IS 3043: 1987 bag consists of 25 Kgs. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.

Supply and run of ' 8 ' SWG G.I wire for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers Wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and run of ' 8 ' SWG copper Wire for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" Brass Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary rock (not requiring blasting) to the required width and depth and depositing the same on bank as directed during excution etc., complete .

Supply of Man Mazdoor (Unskilled Work Men)

Supply of 100A 415 V Porcelain Rewirable Fuse Units. Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / Benlo /Anchor

Supply of 16" (400mm) Wall mounted Fan. Make:- Crompton High flow / Bajaj Elite / Havells Swing Premia gold / orient wall 45 / Halonix krypton / G.M (Bolt)

Supply of 16" (400mm) Pedestal Fan. Make:- Crompton Wind Flo / Bajaj Spectrum / Havells Swing / Orient Stand 37/Halonix Krypton/Polycab / G.M. (Bolt)/Goldmedal(Nora-16)

"Supply of 15"" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes:Crompton Wind Flo / Bajaj Spectrum / Havells Swing / Orient Stand 37/Halonix Krypton/Polycab / G.M. (Bolt)/Goldmedal(Nora-16)

Supply of …3.0W LED……. Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, Makes:Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED/Million/Victoria/Benlo/Goldwyn

Supply and transportation of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply and fixing of ISI marked ( IS:4159) marked copper sheathed,nickle plated, mineral filled heating element including making conKnection testing etc as required a) 3.0 KW

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of .25 Ltrs capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes : Prevailing models of Crompton/ Jaquar / Venus / Racold / AO Smith /Havells /Warmex makes and shall be confirming to SOR specifications

Supply of 28W, 1200mm BLDC Ceiling Fan Sweep : 1200 mm (48"), Rated Voltage: 230V , Frequency:48- 52 Hz, Operating Voltage: - 140-290v single phase AC. Power Factor : 0.99, Air Delivery : 235 CMM Rated Power : 28 W - 30 W, Motor Speed : 350 RPM with speed control, Bearing : Double Ball Bearing Down Rod Size : 260 mm, Service Value : 8.2 CMM/W, Operating temperature within 2 degree of ambient warranty : 3 years on site, Speed Control: Regulator Compatible Conforming as per IS 374-2019 Latest. Makes and Model : Atomberg - EFFICIO - 1200mm(48")/Equalant/TTD Approved Brands, Colour :- White/Ivory

Supply and Fixing of 32 X 20 mm P.V.C. Mini trunking with all accessories fixing on surface walls for surface wiring on Brick / stone walls,RCC roofings, Trusses channels including all labour charges etc., complete. (The rate for plastic frame anchor with countersunk, Tape,Sealant and adhesive for fixing of PVC Trunking will be paid separately) Make: Legrand / OBO Bettermann

Supply and Fixing of 32 X 12.5 mm P.V.C. Mini trunking with all accessories fixing on surface walls for surface wiring on Brick / stone walls,RCC roofings, Trusses labour charges etc., complete. (The rate fopr plastic frame anchor with countersunk, Tape,Sealant and adhesive for fixing of PVC Trunking will be paid separately)

Cleaning the existing ceiling fans at different offices etc., by using the ladders given at site.

"Supply and fixing of 8 or 9 module surface box with modular cover plate with frame on the wall with all required accessories and all labour charges etc., complete Make: Legrand mosaic / north west / M.K / /G.M. / L&T / Legrand arteor

Supply and fixing of 12 / 16 module surface box with modular cover plate with frame on the wall with all required accessories and all labour charges etc., complete

Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus. Specifications: 1. Input Power: 18W ±5% 2. Input Voltage and Frequency: 230V ±5% AC, 50Hz. 3. Power factor : >0.95 4. THD % : <15% 5. Operating Voltage : 140 - 270 VAC 6. Surge Protection : ≥ 2.5 kV 7. LED make: Nichia (Japan) / Osram (German) / Philips Limited/ Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison. 8. Luminous Flux (Lumen) : 1800 ± 5% 9. Luminous Efficiency (LM/W) : 100 ± 5% 10. Colour Temperature (K): 5500K to 6500K 11. CRI : ≥ 80 12. LED Beam Angle : >150º 13. IP Grade: IP20 Warranty : 5 Years. Standards Applicable: IS: 10322 Part-5, Sec-3. Manufacturers internal Type Test

Supply and transportation of ........ LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/ Polycab /Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood) / FortuneArrt(Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply of 120W LED day light integral IP 66 street lights / road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 400mm to 600mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The illuminate shall be with lense for distribution of lighting and suitable to operate on 230V, 50HZ, AC Supply Makes: Phillips / Crompton Greaves /Wipro / KLite / Halonix / Orkus / Havells 1. Output Luminious :12000 Lumens +/-5%

2. IP grade : IP 66 3. Material for glass: toughened glass 4. Material for LED engine: metal core PCB 5. Working temperature: 0 C to 50 C 6. Working humidity : 10% to 90% relative humidity 7. Working life: > 50000 hours 8. LED make: NICHIA (Japan)/OSRAM (German) /PHILIPS LIMITED/ CREE(USA) /BRIDGELUX (USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 10. LED efficiency:>135 lm/w 11. Luminaire efficiency:Not less than 100 Lumens/W +/-5% 12. Total system wattage:120W +/-5% 13. CCT: 5500K-6500K 14. CRI : >70 15. Input voltage and frequency :230-240V AC, 50 Hz +/- 3 Hz 16.Operating voltage:140V-270V AC universal Electronic Driver 18. Powerfactor:>0.95 19. Driver efficiency: >90% 20. THD:<10% 22.IEC/IS Applicable for Luminaire : IEC60529

Supply and transportation of 90W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy > 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE-Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Artt (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Supply of T8 /T5 18W LED batten type fittings Make: Make: Phillips / BaJaj / Crompton Greaves /Wipro / K.Lite / Halonix / ORKUS / AKURAI / Havells/jaquar Technical Specifications: Electrical Parameter : Specification 1) Input power (W) :18±5% 2) Input Voltage (V) :230±5% 3) Power factor :>0.95 4) THD % : <15% 5)Output Voltage (with load) Vdc :60 to 80 V DC 6) Output Current (mA) dc : 225±5% 7) Driver Efficiency (%) : ≥90% 8) Operating Voltage : 140-270 VAC 9) Operating Frequency(HZ) :50± 3 Hz 10) Output open circuit protection :YES 11) Output short circuit protection :YES 12) Surge Protection : ≥ 2.5 kV Optical Specification 1) LED make: NICHIA (Japan) / OSRAM (German) / PHILIPS LIMITED/ CREE (USA) / BRIDGELUX (USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 2)Luminous Flux (Lumen) : 1800±5% 3)Luminous Efficiency (LM/W) : 100+5% 4) Colour Temperature(K) : 5500K to 6500K 5) CRI : ≥ 80 6) LED Beam Angle (Degree):>150 Degree Mechanical: 1) IP Grade : IP20 2) Base : NA 3) Housing : PC 4) diffuser : PC

Supply, Installation , Testing and commissioning of an all-in-one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit and with the following specifications: A. LUMINAIRE The luminaire shall have highly efficient mid power white LEDs with lumen output in the range of 2800~3000 Lumens at system level & wattage should not be more than 15~20W with a typical correlated color temperature of 5700K with CRI>70 and lenses with efficient bat wing optics designed for efficient light distribution for secondary roads. Life will be 50000 Burning hours life class. The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED.

Luminaire RAL 7011 with OEM Name Embossment is mandatory to ensure quality parameters met such as Single Piece High Pressure Die Cast. A switch shall be provided on the housing to disable the luminaire when required. The Luminaire shall meet the relevant IEC codes as mentioned in Table 1. Product should always deliver fixed output of 2800~3000 lumens at system level during complete autonomy period.

B. INTEGRATED CHARGE CONTROLLER: The luminaire shall have a highly efficient, integrated microprocessor based MPPT charge controller with driver mounted on the same board to minimize power loss. This intelligent power management system shall maximize the overall system efficacy to Minimum 175 lumens/watt with LM79 Report from Any NABL Accredited lab. The Controller Efficiency shall be > than 90% and shall have the following inbuilt protection features:

Ø Protection against battery overcharge and deep discharge condition. Ø Protection should be provided against battery and Panel reverse polarity. Ø Over current protection. Ø Protection for reverse flow of current through the PV module(s) should be provided. Ø ON/OFF switch to be provided to prevent discharge of battery during storage / before Installation Ø The Controller shall meet the relevant IEC codes mentioned in the table-I.

C. SOLAR MODULE : The Solar Cell shall be made of Premium grade mono crystalline silicon Cell. The Solar Module Power (Wp) shall be minimum 3.5 times the power consumption of LED Streetlight. The Solar Module Construction shall be of Low iron tempered glass with low reflection characteristics and with rated IP 65. The Life Cycle shall be > than 25 Years. The Solar module shall meet the relevant IEC codes mentioned in Table-I. D. BATTERY : The Battery shall be Rechargeable Lithium Ferro Phosphate (LiFePo4) Battery Pack with rating (AH) minimum 1.75 times the power consumption of LED Streetlight. The Battery Pack should have Inbuilt Battery management system Module with following safety features Ø Accidental short circuit Ø Over discharge Ø Over charge Ø Over temperature. Ø Low Temperature The Life Cycle shall be Minimum 2000 Cycles for 90% daily depth Discharge. The Battery shall meet the relevant Compliance Standards mentioned in table-I.

E. HOUSING : The luminaire shall have single piece pressure die cast LM6 aluminum housing with Proper OEM Brand Name Embossment for ensuring quality & ruggedness and excellent heat dissipation with IP 65 protection and IK08 impact resistance. The front cover is composed of weather resistant, UV stabilized polycarbonate. The front cover is tightly secured with the housing to ensure that the luminaire has an ingress protection of IP65. The luminaire shall have a smart self-diagnosis feature with LED indicators for battery charging, deep discharge and Load cut off indication visible from ground in day light.

Additionally, it should also be possible to monitor Current and voltages of Solar panel and Battery for diagnostic purposes through the mobile app. Test Certificate from Any NABL Lab is required. F. Mounting Bracket : The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. It shall be suitable for mounting on pole of diameter 48 – 60mm. Make: Philips/Jaquar / Havells or its Equivalent in TTD approved brands

(Rupees Nine Lakhs Thirty Thousand Eight Hundrd Nine and Paise Eighty Seven only)