Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹13.0 L+₹85,560.86 (7.06%)Rejected-Finance | L2 | Rejected-Finance QUOTED HIGH | |
| 3 | L3₹13.2 L+₹1.1 L (8.89%)Rejected-Finance | L3 | Rejected-Finance QUOTED HIGH | |
| 4 | L4₹13.2 L+₹1.1 L (8.92%)Rejected-Finance MIL STN AGARTALA | L4 | Rejected-Finance QUOTED HIGH | |
| 5 | L5₹13.4 L+₹1.3 L (10.8%)Rejected-Finance C O MR M K BHOWMIK NEAR TAPAN VARIETIES JOYNAGAR 06 AGARTALA TRIPURA W 799001 | WEST TRIPURA | TRIPURA | 799001 | L5 | Rejected-Finance QUOTED HIGH |
Tender Value
₹12.0 L
EMD Value
₹23,980
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
SPL REPAIRS TO BLDG NO T-312(OR LIVING) IN ZONE N AT MIL STN AGARTALA
2023_MES_632209_1
8490/E8
Open Tender
Civil Works
Item Rate
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹23,980
Yes
5 Mar 2024
15 Dec 2023
15 Jan 2024
15 Dec 2023
12 Jan 2024
29 Dec 2023
Amount
Schedule'A' Part-I: B&R works
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone agg complete as specified.
M&L 25 thick P.C.C (1:2:4) type B-O using 12.50 mm graded stone aggregate as in floor finished rough.
S&F of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor or skirting etc set and jointed in neat cement slurry over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed
Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
S&F of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass with stainless steel mosquito proof gauge 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.)
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
Taking down shutter from the frame exe 1.00 Sqm and n exc 2.0 Sqm each complete all as specified and directed.
S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed
M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F of 150 mm long anodised barrel tower bolt of extruded section and as directed.
Dismantling framed timber scantlings 40 sq. cm & over in section, in any position all as speciied and directed.
S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O all as speciied and directed.
M&L for two coat of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10 cm width or girth including preparation of new surfaces.
Dismantling of AC sheet (corrugated / semi corrugated sheets) in roofing any gauge and any thickness including ridge, valley/gutter etc.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.etc.
M & L 15mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:4 to be finished fair and even with out suing extra cement.
M&L for external rendering 15 mm thick in CM 1:4 mixed with WPC @0.20Ltr/ bag by weight of cement on brick work or concrete surfaces of wall finished even and smooth complete all as specified .Note-WPC shall be measured and paid seperately.
Supply only Liquid water proofing compound
M& L for 2mm thick Wall care putty on wall Surface incl preparation of new surface compete all as specified and as directed
M& L for 2mm thick Wall care putty on wall Surface incl complete removal of existing treatment and preparation of old surface compete all as specified and as directed
M & L two coat of Oil bound distemper over a coat of pimer complete all as specified
M& L for two coat of cement base paint on new plastered surface over a coat of primer including preparation of surface complete all as specified and as directed
M&L for complete removal of existing treatment on wall surface and applying two coats of cement base paint white or tinted over a coat of primer on old wall surface including preparation of surface complete all as specified
M & L fo finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) incl preparation of old surface complete all as speified.
Dismantling ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and as directed
S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. including 4 mm thick Non Asbestos fibre cement building board (E-board) for fixed Aluminium frame work with screws as in ceiling complete and preparation of new surfaces over ceiling and applying two coats of oil bound distemer over a coat of chalk whitening on board complete all as specified and directed.
Demolition of cement concrete(un Reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed.
Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified
Dismantling timber boarding of any description fixed in any position complete all as specified and as directed
S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed
M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified .
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor and joints are filled with grey pigment cement and pigments laid over 15mm thik screed bed in CM 1:6 complete all as specified
M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.of Cross section exc 25 Sqcm and n exc 50 Sqcm complete all as specified .
Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed.
Schedule'A' Part-I: E&M works
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for taking credit including making good of the disturbed surfaces, all as specified and directed.
Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.44 to 49: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately.
All as per item No 44 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.
All as per item No 44 above but for one 3/5 pin 6 Amps socket outlet on the independent board.
Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed.
Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth
Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,6 and 16 Amps, flush type complete all as specified and as directed.
Materials & labour for switch piano flush button 6 Amps single pole, 1 way complete all as specified and as directed.
Material and labour for switch socket combination 5 Pin, 6 Amps flush type complete all as specified and as directed
Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.
Materials and labour for electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed.
Supply & fixing MCB DB (Double door) SPN, 12 way sheet steel with bus bar, din rail, neutral link and earth bar including taking down old DB with fitting & fixtures all as specified and directed.
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed.
Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed
Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed.
Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I including taking down old earthing.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver and integrated tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed.
Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed
Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of cable,foundation etc and getting out in soft/loose soil complete all as specified and as directed.
Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
Supply, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 10 sqmm x 2 core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe including takingdown old u/s cable,compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately in respective item of Sch 'A' .
Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed. Note:- Punned depth shall only be measured and paid.
S & F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed.
Supply and lay GI pipe 50 mm bore (dia) light grade in trenches/road/surface/pole/wall crossing for protection of cable with necessary fittings as required including takingdown old u/s GI pipe complete all as specified and as directed.
Cutting hard standing / road for laying of cable / protection pipe complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D-2 (using 40mm graded aggregate) for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
SHRI RAJESH DEY
M/S SANKAR GOPE
M/S PRITAM ENTERPRISES
SHRI SUBRATA GUHA
M/s Amrit Gope
M/S PAUL ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .