Thanthoni Block - SFC(DP)-2025-26

Amount

Supply and cost of 160 mm dia 6 KSC PVC pipe with ISI mark etc complete

Supply and cost of 100 mm dia GI pipe B Class with ISI mark etc complete

Supply and cost of 150 mm dia GI pipe B Class with ISI mark etc

Earth work excavation for in all clauses of soils and sub soils to full depth Jas may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of P.V.C and G.I pipe into the trench with proper grading and alignment and all labour charges etc,, complete

160mm PVC GKSC

150 mm GI Pipe

100mm GI pipe

Refilling the Pipe line trench with excavated earth other than sandcomplying the Standard specification etc,,complete 160mm PVC 6KSC

PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 10 Sqmm Flat Cable

Supply and delivery of 50 Sqmm 3.5 Core UG Aluminium cable. 50sqmm 3.5 core

50 Sqmm 3.5 Core UG Aluminium cable laying in trenches inside the pump room or motor Room 50sqmm 3.5 core

Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes. 160mm PVC 6KSC

Supply and Fixing of Anchoring Arrangements to product the GI Pipes in the River Potsion by 65 mm GI Pipe Bending suitably to fix the firmly in to the River bed flow 1.00 ni from bed level including all labour charegs etc, 50 mm GI Pipe 6.00 m in 2 Noti, 50 mm địa Ụ Clamp set 3 Nos, 100 mm Dia U Clamp set - Ino and MS Angle 2.50 feet Length & Bolt nut including Air Compressor charegs etc Anchoring Arrangements

SUB ESTIMATE Pvc & GI Pipe

100mm Gt Elbow

150mm Gt Elbow

100mm Gl Coupling

100mm Sluice Valve

100mm DI Non Return valve

150mm Sluice Valve

150mm GI Nipple

100mm Gt Nipple

150mm CI Flange with bolt nut and washer

160mm PVC Bend

110mm PVC Bend

100mm Ci Flange with bolt nut and washer

Rupper insertion sheet

20mm dia MS bolt nut and washer

160mm PVC FTA

110mm PVC FTA

160mm PVC Coupling

Solvent Cement

Shellack

SUB ESTIMATE EB electrical

200 X 415 V Fuse unit With heavy

100Amps RCCB Switch with heavy

19/16 VIR Copper wire with heavy

Insulation tape roll

Copper Earth plate set

SUB ESTIMATE Repairing of 201 IP Openwell submersible pumpset and panel board

Labour charges for Removing of 20 HP Openwell sub 1. No pumpset from the Infiltrationwell

Rewinding of Openwell types following 3 phase Submersible replacement of burh out winding copper wound wire of SWG 19x2 gauge wires from minimum 5kg to maximum 20Kg. Insulation sleeves, top and bottom thrust gun metal bearing bush, oil seat bush, bush lock nuts, motor stator and rotor core Re-setting. rotor shaft machining with 5mts terminal connection flat coppor cables including removal of all materials cost to be deducted and repairing materials costs and labour charges elc, complote as instructed by Deptl Officers

Reconditioning of Openwell types following 3 phase Submersible Pumpsets with replacement of upper and bottom thrust bearing in gun metal, impeller guide bushes & sleeves, reconditioning of pump shaft with metal welding and machining with out any damages Including servicing charges and testing etc, including removal of all materials cost to be deducted etc. complete as instructed by Depti Officers

Re-erection of following three phase 20HP Open well Subinersible Pumpset after attending repairs including fixing and jointing submersible cable with proper clamps upto the starter efc, complete as instructed by Departmental Officers

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

NAVALADIYAN ELECTRICAL AND REWINDING WORKS (BID ID -1452686)