Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L1 | Accepted-Finance Accept | |
| 2 | L2₹22.3 L+₹4,863.32 (0.22%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹23.0 L+₹67,291.90 (3.02%)Rejected-Finance RAMBHAWAN MOUNT ABU SADAR BAZAR MOUNT ABU PIN 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L3 | Rejected-Finance Rejected due to bidder not L1 | |
| 4 | L4₹23.6 L+₹1.3 L (5.76%)Rejected-Finance | L4 | Rejected-Finance Rejected due to bidder not L1 | |
| 5 | L5₹24.4 L+₹2.1 L (9.44%)Rejected-Finance | L5 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
29 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Mahendra Asawale
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
PROVN OF STORAGE ACCN OF 611 EME BN AT AHMEDABAD CANTT
2023_MES_612761_1
8358/E8
Open Tender
Civil Works
Works
210 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹48,000
Yes
5 Sept 2023
8 Aug 2023
31 Aug 2023
8 Aug 2023
29 Aug 2023
15 Aug 2023
8 Aug 2023 - 15 Aug 2023
Amount
Surface dressing n exc 15 cm deep and getting out in soft/loose soil soil.
Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed
Ditto as per Item No 1 for each additional 1.5m or part thereof in depth beyond the first 1.5 m
M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed
Filling under floor with excavated soil spreading and levelling in layers including watering and well ramming.
M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc all as specified and directed by engineer- in- charge
M & Lfor 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in sub base of flooring, complete all as specified.
M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed
As per but 6mm to 8mm dia
M&L TMT bars 5 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders etc all as specified & as directed
M&L, RCC in M25 (20 mm graded aggregate) for foundation including rafts, footings, foundation beams;, plinth beams; bases for columns, etc, etc all as specified and as directed
M&L, RCC in M25 (20 mm graded aggregate) for Columns, pillars, piers, posts & struts etc all as specified and as directed
M&L, RCC in M25 (20 mm graded aggregate) for Beams, cantilevers, bresummers, lintels over 1.5 m span etc all as specified and as directed
M&L RCC in M25 (20 mm graded aggregate) Chajja
M&L for RCC in M25 (20mm Graded Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L, Flat Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar work; vertical or to batter all as specified & all as directed
M&L,Formwork to rough finish surface of flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed.
M&L for use and waste for Form work, fair finished to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm
M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed
M&L, Flat Form work to sides and soffits of floors or roof beams, beam haunchings, girderrs, bressum-mers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc all as specified & all as directed
M&L Form work to chajjas, trough and similar items including edges
M&L, Brick work with sub class 'B' straight or curved on plan exc 6m mean radies built in CM 1:4 all as specied and directed by Engineer-in-Charge
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm
Removing excavated material exc 1.5 KM and n exc 5.00KM depositing where directed at a level n exc. 1.5m above the starting point complete all as specified.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured)
Treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall
M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.
M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 mixed with water proofing compound @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling ,chajja etc complete all as specified and directed.
Supply only Integral waterproofing compound.
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dove-tailed or welded complete including one coat of shop coat of primer.
M&L for 5.5mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and as directed.
S & F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified
S&F Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides
S & F pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.
M & L for providing PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in filling pressed steel frame
M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer with alkali resistant priming paint on walls all as specified and directed by the Engr-in-Charge
M&l for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash all as specified
M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified
M&L for preparation of new steel surfaces exc 10cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.
Removing excavated material exc1.5 km and n.exc 5.0 KM depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified
M & L for providing 100 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregate as in road / path, hard standing etc. with and including all necessary form work to divide the area in panels exc 6 Sqm but not exc. 9 Sqm each and providing 10 mm thick joints through out the thickness of road / path duly filled with mastic filling of one part of 85 / 25 hot bitumen and three part of coarse sand (By weight) complete all as specified and directed.
M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.
Surface dressing n exc 15 cm deep and getting out in soft/loose soil soil.
Removing excavated soil exc. 250m but n.exc 500m and depositing where directed.
Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-
(a) One light point controlled by one switch.
(b) One Cealing/Ex/Venti fan point controlled by one switch.
(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.
(e) One socket outlet 6 amp controlled by one switch on indepdendent board.
Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting up complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
S&F LED 20W building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed
M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16 A, 250V, 2P+earth
Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V
S&F cealing fans complete with blades,down rods,electronic regulator and accessories, , 230 volts, 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE,five star rated with brushless direct current motor (BLDC) complete all as specified and directed
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-
(a) Single pole 6 to 32 amp.
(b) Double pole 32 amp.
XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sq. mmX 2 Core
Excavating in trenches in Hard / dense / soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point.
Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed.
M&L for Sub Class 'B' bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required as in protection of cable.
M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable all as direted.
VIJAY CONSTRUCTION CO
M/s Matadeen Ramchandra Agarwal
TECH SERVE SOLUTIONS
nevi constructions
GIRNAR CONSTRUCTION
Shreeganesh Construction
ALBA AC AND REF SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .