Re-Electrification of old collectrate Building District Pauri under District Plan.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required. Group -C

do but two way point.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required..

5/6 amps switch

3 pin 5/6 A socket outlet

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLSC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing 1 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Inveter wiring

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing 8 way , Double door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing Single pole 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing40A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.

S/F of computer point including 04 nos 5A modular switch and socket with 12 module box with cover plate.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Erection of metallic pole of Above 4.5 metre and upto 6.5 metre length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of metallic pole of upto 3 metre length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

S.I.T.C of copper bonded rod with low carbon steel,high tensile strength copper rod with min 250 microns of copper coating diameter -17.2mm , length - 3 meter, materials- copper bonded coasting thickness-250 microns min, environment friendly, RoHS certified low resistivity carbon based ground enhancement material in 50kg pack to fill the bore area around the rod and provinding of suitable connector and lugs including excavation and refilling as per specification make-indelec/furse/Erico/JMV.

The Design, manufacture, Supply, Installation, Testing & Commissioning of following Lighting Panel: Three Phase, 415V Lighting panel, IP 65 Out door type with canopy, Including standing Arrangement ,single door with lockable arrangement made from 2 mm thick CRCA sheet steel,The panel shall be given one coat of red oxide primer and two coats of enamel paints/ powder coated (inside & outside), 1 no.earth stud on each side face, Phase indicating lamps RYB with 6 Amps SP C Series MCB back up. Electrolytic high conductivity Copper Three phase and neutral busbars rated at 160 amps, 18KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. 50KA Type 1+2 Class (3P+N) Surge protection device and having following: Incomer: 80-100A 4P MCCB (36 kA) - 1no.,RYB Indication Lamp, Digital VAF Meter with 100/5A CT CL-1 for metering, CT Short Link,.Including Grouting on Base at Ground by Cement Concrete.Outgoing: 32-40A 4P 25KA MCCB - 2 no ,25-32A 4P 25 KA MCCB 02 Nos and 63 A FP manual changeover switch 01 no. Make ;- L&T/havells/legrand/siemens

S.I.T.C of hight 3M Decorative Pole , base made of cast iron in pleasing design. its tentative dimensions- 170 mm(dia.)x700mm(H) . cast iron column with Decorative Intermidiate Rings & Top ring are made of cast iron as well. Cast iron parts should be made with Material-Grey Iron. The decorative pole is provided with a suitable size steel base plate Dia 300mm thick 12mm. This mounting steel plate along. entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole made of GIpipe for effective corrosion resistance. The GI pole should be provided with an in built junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. Pole & it's part are painted in 3 layer coating (coating thickness-100 microns minimum) in which 1st layer with etch primar, 2nd layer with epoxy primer & 3rd final layer with PU paint. make :-jagaur/philps//homdec

Supply and Errection of 6 mtr hight hot dip galvanised Octagonal Pole with 135mm Bottom A/F and 70mm Top A/F made up of 3mm thick HT Sheet Along with base plate of size 200x200x12mm thick The pole shaft shall be made from hot rolled steel plate confirming to IS 2062/ BS EN 10025. the octagonal poles shall have door of approximate 500mm height at the elevation of 500 mm from base plate including 1 mtr long hot dip galvanised single arm bracke made up of 40NB dia G.I. pipe suitable to mount on ple having top 70mm A/F and 4Nos of M20X750 long 'J' type EN 8 Grade foundation bolt along with template and pole shall be suitable to withstand wind speed as per IS-875 IEC & BIS.backlit Sheet With Cable Termination Arrangement Installation Charges including Skilled Labour and Rent of T&P to Complete the job in All Respect. Make:-Surya Roshni Limited/Bajaj Electricals/Crompton

The Design, manufacture, Supply, Installation, Testing & Commissioning of following Lighting Panel: Three Phase, 415V Lighting panel, IP 65 Out door type with canopy, Including standing Arrangement ,double door with lockable arrangement made from 2 mm thick CRCA sheet steel,The panel shall be given one coat of red oxide primer and two coats of enamel paints/ powder coated (inside & outside),1no.earth stud on each side face, Phase indicating lamps RYB with 6 Amps SP C Series MCB back up. Electrolytic high conductivity AL Three phase and neutral busbars rated at 63 amps, 18KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. 40KA Type 2 Class (4P+N) Surge protection device ,having following: Incomer: 32-40A 4P MCCB (25 kA) - 1no., 40A 4P contactor -1no.Rotary Handle,RYB Indication Lamp, Spreader Terminal, Astro Time Switch having following facilities:Precise time programming for-Daily/Weekly,Pulse switching,Simple Reset feature,Week end programming, 24 Hr display (Military), Manual Over ride. Supply Voltage & Frequency:110-240VAC,+10%/-20%,50/ 60 Hz; Memory Locations: 8 On / Off operations, 16 memory locations; Minimum Switching Time: 1 min; Housing: Flame Retardant UL94V0. , Add on Block as required.On Indication Lamp Green LED for relay ON ,Off Indication Lamp Red LED for relay Trip, Auto and Manual Switch.Including Grouting on Base at Ground by Cement Concrete.Outgoing: 32A TPN MCB C Series (10 kA) - 03 no with Outgoing Terminal.

S/F of 36 watt LED street light fitting High performance low wattage street light with Single Die ceramic base high power LED light source, IP66 protection, PDC housing with finless design and high impact resistance (IK08) Polycarbonate cover with integrated street Light optics. Make- havells/philips/cropmton

SITC OF 40 watt post top Light Its upper frame in square shape made of die cast aluminium using pressure die-casting process.The time frame is hinged to the lower frame and is equipped with two small knobs for opening, Lower frame with square shape made of die caste aluminium using pressure die-casting process,composed by a basket with four linear vertical arms, and a support element with four-arms and a flange with a hole (dia.28 mm) for a mounting on the support Four nos of decorative elements should also be provided as in the image.Frasted Screens made of polymethylmethacrylate (PMMA) Pure polyster powder coating in standard Grey Colour, Optical Compartment IP Rating-IP 65, IK06 Power LED Module with Company/brand name printed on PCB with the metal core plate, LED Chips of Bridgelux /OSRAM/LUMILEDS make with individual LED's Minimum Luminious Flux (lm) - 90lm/w shall be used -same should be supported by LED manufacture's tech sheet. Colour Rendering Index:Ra>70.Electronic Power Supply for LED Module,which offers Protection against Short Circuit.Over-Voltage & Over-Current,with in -built surge protection (an additional surged protection device of 10kV also provided in -built the fixture). make- jagaur/havells/philips/crompton

S/F of up to 20 watt wall mounting fancy lighting fittingMake- havells/philips/cropmton

S/F of 32 watt 600x600mm surface/ recess LED panel fitting make-havells/philips/cropmton

S/F of 10 to 20w LED bollard light fiiting IP 65 Cone series acts as an imposing street furniture. The elegant yet minimalistic design acts a silent observer and giving light, diffuser at the upper portion adds functional value into landscape environment.make-havells/philips/cropmton

S/F of 20 watt LED tube fitting Basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver make-havells/philips/cropmton

S/F of 10 watt Led mirror light fitting make:-havells/philips/cropmton

S/F of 1200 mm with double ball bearing ceiling fan make :-orient/havells/crompton

S/F of 300 mm fresh air fan metalic body with mesh make :-orient/havells/crompton

s/F of 15watt LED bulb make:philips/havells/crompton

S/F of 10watt two way wall washer With modern, minimalistic design, this wall light exudes a distinct look when installed on the walls of buildings, gardens and along pathways. It can be strategically put to highlight your surroundings with exquisite patterns. The two-way directional light on either side of the wall, illuminates a larger surface area for a magical look. make:-havells/philips/cropmton

Supply and Laying of 4 x25 sq.mm Aluminium conductor armoured cable direct in ground including excavation,sand ,coushioning protective covering and refilling the trench etc. as required Make- polycab/KEI/havells/finolex

Supply and Laying of 4 x6 sq.mm Aluminium conductor armoured cable direct in ground including excavation,sand ,coushioning protective covering and refilling the trench etc. as required Make- polycab/KEI/havells/finolex

Lotus Contractors and Traders

Purohit Hydro Power Management

SATISH ELECTRICALS PAURI

vijay electrical