Renovation to Existing Street Lights On Chansma-Patan-Deesa State Highway Road At Patan , Dist. Patan.

Name of Work:-Renovation to Existing Street Lights On Chansma-Patan-Deesa State Highway Road At Patan , Dist.

Rate at which the materials

SR Quantity Perticulars Place of delivery

will be charged to the

Signature of contractor

Deputy Executive Engineer Executive Engineer,

Patan Electrical Sub Division Mehsana Electrical( R & B ) Division

R&B Deptt. Patan Mehsana

Name Of Work: Renovation to Existing Street Lights On Chansma-Patan-Deesa State Highway Road At Patan , Dist. Patan.

Item No. Item Description Qty Unit Net Rate Rate in Words Amount

1 Replacing old & U/S by new Supplying and erecting 1000 Mtr 46.46 Rupees Forty Six

Flexible PVC insulated multi strand multi core 1.1 Paise Forty Six Only

kv grade ISI marked copper wires of following size

to be erected as directed..e).1.50 Sq.mm 3 core

round PVC sheathed (old- 216, New-784)

2 Supplying and erecting LED street light / Flood 112 Nos 6566.01 Rupees Six

light fittings with High power White LEDs wattage Thousand Five

of 3 Watt and above assembled on single MCPCB, hundred Sixty Six

efficiency more than 130 lm/w and corrosion free Paise One Only

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection. (iv) above 90 to 120 watts cat.

3 Plastic enclosure fitted with DIN rail suitable for 112 Nos 52.52 Rupees Fifty Two

incorporating One / Two nos. MCB Paise Fifty Two Only

4 Providing and erecting Pipe type earthing having 56 Nos 368.65 Rupees Three

150 cms.long and 2.5 cms. dia. galvanised iron pipe hundred Sixty Eight

with coupling and buch buried in specially Paise Sixty Five Only

prepared earth pit complete with necessary 8 SWG

5 For using salt and charcoal / coke as required for 56 Nos 171.70 Rupees One hundred

pipe type earthing. Seventy One Paise

6 Replacing old & U/S by new Providing and, fixing

heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.

(B) 2 to 4 core 6 Sq. mm 112 Nos. 38.38 Rupees Thirty Eight

Paise Thirty Eight

7 Replacing old & U/S by new Providing and erecting 2200 Mtr 140.39 Rupees One hundred

XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Forty Paise Thirty

/ Solid Aluminium conductor for 1.1 KV. to be laid Nine Only

on wall with necessary clamps or in existing trench

/ pipe of following size of cables (C) 4 core 10 Sq.

mm (old-600, new-1600)

8 Providing and erecting XLPE (IS:7098)(I)-88 ISI 800 Mtr. 153.52 Rupees One hundred

armoured cable multistrand Aluminium conductor Fifty Three Paise

for 1.1 KV. to be laid on wall with necessary Fifty Two Only

clamps or in existing trench / pipe of following size

of cables (A) 4 core 16 Sq. mm

9 Providing & laying approved make Double walled 2700 mtr 62.62 Rupees Sixty Two

corrugated pipes (DWC) of Paise Sixty Two Only

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable(A)50 mm outer dia

10 Making trench in soft soil of suitable width of 90 2000 Mtr 55.55 Rupees Fifty Five

cm deep for laying cable or locating the fault all Paise Fifty Five Only

over the run and back filling the same and making

the surface as normal ground.

11 Making trench in Hard Murrum / Tar Road of 200 Mtr 74.74 Rupees Seventy

suitable width of 90 cm or required depth for Four Paise Seventy

laying any size of cable or locating the fault all Four Only

over the run and back filling the same and making

the surface as normal ground.

12 Making trench in Hard Murrum / Tar Road of

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

(B) If additional machinery like hammer driller or 200 Mtr 432.28 Rupees Four

JCB use [Add] hundred Thirty Two

Paise Twenty Eight

13 Drilling the road without breaking the road surface 80 Mtr 492.88 Rupees Four

(Asphalt) for laying of cable for feeding power hundred Ninety Two

supply by making up to following size of holes at Paise Eighty Eight

both ends complete..(A) Up to 100 mm bore dia Only

14 Replacing old & U/S by new providing and erecting 112 Nos 112.11 Rupees One hundred

Miniature circuit breaker single pole 6A to 25A Twelve Paise Eleven

suitable to operate on 240 V A.C. system and Only

having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI

Mark cat-III (old-56,new-56)

15 Replacing old & U/S by new Supplying & erecting

Steel tubular pole (Swaged) confirming to IS -

(Part-II) 1980. Manufacturing process of steel

tubular pole should be as per IS specification. Basic

steel tube should be ISI Marked. Pole should be

painted by one coat of Zinc comet Primer and two

coat of Aluminium /approved paint to be erected

on / in existing Foundation. The length of poles are

(C) 9.0 mtr. Long Swaged Steel tubular pole

(i) Pole as per IS code 410-SP-25 with 300 X 300 X 41 Nos 8463.80 Rupees Eight

4 mm base plate with necessary G.I. J Bolts Thousand Four

(Approximate weight 78 Kg) For burial erection hundred Sixty Three

(old-16,new-25) Paise Eighty Only

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 41 Nos 982.73 Rupees Nine

mm for pole, mounting on surface of foundation hundred Eighty Two

on GI foundation bolt. with required stiffeners. Paise Seventy Three

(iii) Add Extra for PU base primer and PU Paint on 41.00 Nos 481.77 Rupees Four

pole. hundred Eighty One

Paise Seventy Seven

16 Replacing old & U/S by new Supplying and erecting 15 Nos 14010.72 Rupees Fourteen

approved make Octagonal pole made from HR Thousand Ten Paise

sheet steel. The pole should be made as per IS. and Seventy Two Only

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable

termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement (G)

Mtr. Long 70 mm Top X 155 mm bottom dia,

mm thickness with 260mmX260mmX16mm base

plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts Approx Pole weight 84 kg

17 Replacing old & U/S by new Supplying and erecting

B class Galvanized iron pipe having smooth

finished bore of the pipe on both ends erected

nuts and bolts along the pole / wall shaping the

pipe as per site requirement. Pipe dia as following.

(old-48,new-157)

(D) 50 mm dia. 205 Mtr 326.23 Rupees Three

hundred Twenty Six

Paise Twenty Three

18 Replacing old & U/S by new Supplying & erecting 41 Nos. 515.10 Rupees Five hundred

approved make SMC press moulded composite Fifteen Paise Ten

FRP. loop-in, loop-out approx. 2mm thick box Only

complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep] (old-24,new-

19 Replacing old & U/S by new Providing and erecting

street light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for

fixing the brackets and having sprNos.d of 1 mtr.

length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red

oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of

arms. (old-8,new-7)

[B] Double Arm Bracket 1 Mtr 15 Nos 829.21 Rupees Eight

Nine Paise Twenty

20 Providing 1:2:4 cement concrete foundation & 70 41 Nos 1652.36 Rupees One

% PCC from bottom including excavation for the Thousand Six

pole of size 60 x 60 x 150 cm. Deep in below hundred Fifty Two

ground level with plinth of 45 cm x 45 cm(or 45 cm Paise Thirty Six Only

dia x 45 cm) high upper ground level with

necessary curing and neccesary 4-Nos M20 Bolts

and 600mm long with necessary G.I. J Bolts

finishing in approved manner.

( for 9 & 10 mtr pole)

21 Replacing old & U/S by new Providing and erecting

street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for

fixing the brackets and having spread of 1 mtr.

length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red

oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of

arms. (old-16,new-25)

[B] Double Arm Bracket 1 Mtr 41 Nos 758.51 Rupees Seven

hundred Fifty Eight

Paise Fifty One Only

22 Replacing old & U/S by new Solder less crimping

type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an

approved manner.

(A) 1.5/ 2.5/4/6 Sq.mm 896 Nos 6.06 Rupees Six Paise Six

Amount In Words

I / We am / are willing to carry out the work at _________

above / below __________________________percent ( should be written in figures and words )

Estimated amount Estimated amount

put to be tender Rs. _____________ put to be tender Rs. _____________

Deduct ______% below Rs. _____________ Add ______% above Rs. _____________

In words :- In words :-

* Please strike out whichever is not applicable.

1. I / We hereby declare that I / We have visited the site and fully acquited myself / ourselves

with the local situtaion regarding materials, labour and other factors pertaining the work

before submeeting this tender.

2. I / We hereby declare that I / We have carefully studied conditions of contractors,

specifications and other the tender documents of this work and agree to work execute that

same accordingly.

3. Approval of Material used in the above work shoud be approved from the Executive Engineer R&B Ele. before the startting of

the work. Incase of failure of to do this , All liability of the agency will be fixed and all material will be removed on agency expense

4.dismental value Rs 33673.84 /- will be deduct from bill

Sign of Contractor

Dy. Executive Engineer Executive Engineer,

Patan Electrical R&B sub. Div. Mehsana Electrical( R & B ) Division

Dismental Material List

Name of Work:- Renovation to Existing Street Lights On Chansma-Patan-Deesa State Highway Road At Patan , Dist.

SR . NO. ITEM DETAILS QTY Unit AMOUNT

1 Steel Tabular Pole 9 Mtr 16 nos 8041 10 804.1

2 Allu. Cable 4 X10 mm2 600 Mtr 125 7 8.75

3 Streetlight Bracket Double Arm 1 mtr MS 16 nos 700 10 70

4 Ogtagonel pole Bracket Double Arm 1 mtr GI 8 nos 770 10 77

5 Ogtagonel pole 8 Mtr 8 nos 13424 10 1342.4

6 SP MCB 6 to 32 A 24 nos 98 5 4.9

7 SMC Box 200mm x 180mm x 100mm [deep] 24 nos 495 5 24.75

8 GI Pipe 50 MM 48 Mtr 293 10 29.3

9 1.5mm2 2 core flex. Copper Wire 216 Mtr 29 11 3.19

10 Cable gland 10 mm2 48 nos 27 5 1.35

11 Cable lugs 10mm2 384 nos 11 5 0.55

Signature of contractor

Dy. Executive Engineer, Executive Engineer,

Patan Electrical sub. Div. Mehsana Electrical( R & B ) Division