Loading
Loading…
Loading…
Tender ID
Tender Value
₹53.4 L
EMD Value
₹1.1 L
Closing Date
20 May 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEGTVC
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V" whichever is less where V= advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited , the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure -VI B, along with copies of Audited Balance sheet duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited balance sheet. ( Click here to download Format)
For Electrical works, the contractor should have a valid Electrical contractor license from the concerned statutory authority of any state of India. The Electrical license should be in the name of the firm's or in the name of any authorized person of the tenderers firm. It must be ensured that the validity of electrical license should be valid during the entire contract period duly renewing at appropriate time for extending validity. If the tenderer hired the electrical license, authorization of the same should be submitted.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: Works involving wiring/ lighting with 240V Single phase or 415V Three phase system with control gear and protection arrangements in residential buildings or Service buildings or Railway stations/ Yards or Colony/ Highway lightings
13 conditions · 1 needing a document upload
All the tenderers/Contractors have to deposit full earnest money and tender document cost as stipulated for the tender, through online modes as permitted in IREPS application through multiple banks net banking, debit and credit cards . All documents related to Partnership deed/Joint venture/ Consortium/ MOU, duly signed by the notary public, should be uploaded failing which offer will be summarily rejected.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions , explanatory notes of schedule of work and Annexures.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
Manual submission of EMD and cost of tender form cannot be entertained/Considered and hence no need of uploading the scanned copy of financial instruments
Whether GST registration available or not?
The contractor has to submit the EPF Code as per the EPFO Act and also has to submit a statement in this regard before signing the contract agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bidder has to fill in his quoted rate against each item in the Bid rate / Unit rate column. The bidding rate is Rs./ unit, the bidder has to quote his rate for the individual item only
Subsequent to the enforcement of GST Act, the modifications to Para-(a),clause 6, part I of Indian Railways Standard General condition of contract, July 2014 vide Railway Board letter No: 2017/CE/CT/4/GST(a) of 23/6/2017 is as detailed below: Clause No.6 - Care in submission of Tenders: (a)(i) Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer. (ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017 (CGST)/ Integrated Goods and Services Tax Act, 2017 (IGST)/Union Territory Goods and Services Tax Act, 2017 (UTGST)/respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to Railway immediately after the award of contract, without which no payment shall be release to the contractor. The contractor shall be responsible for deposition of applicable to the concerned authority. iv) In case the successful tenderer not able to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. The contractor is liable to pay the taxes as stipulated in the GST Act and Rules and also should furnish the details of GST to deduct from the contractor's bill.
Electrical arrangements to new halt station near Cochin Airport
V-EG-OT-02-2026-2027
V-EG-OT-02-2026-2027
Open
Works - General
180 Days
Thiruvananthapuram, Kerala
₹0
₹1.1 L
20 May 2026
28 Apr 2026
6 May 2026
137 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 53,39,268.5 | ||
| — | 1.00 | — | — | ||
| Fabrication, supply, erection and commissioning of powder coated plinth mounting type power supply bunk of size 800 x 600 x 400 made out of 10 SWG MS sheet with provision for fixing 1 No. 3phase KWH meter and fitted with 3 numbers of 125 A porcelain fuse units and one neutral link fixed on painted suitable size angle iron supports including connection of UG cables as per Drawing No.V/E.15/19-20. | — | — | — | 30,800 | |
| — | 675.00 | — | — | ||
| Supply and laying of HDPE pipe of 110 mm dia, pressure rating up to 4 PN (Material grade PE 63) conforming to IS 4984 /2016 in the excavated cable trench /Existing trench and threading of LTUG cable. | — | — | — | 3,36,825 | |
| — | 325.00 | — | — | ||
| Supply and laying of HDPE pipe of 50 mm dia, pressure rating up to 4 PN (Material grade PE 63) conforming to IS 4984 /2016 in the excavated cable trench /Existing trench and threading of LTUG cable. | — | — | — | 49,725 | |
| — | 50.00 | — | — | ||
| Transportation and clamping of single run of LTUG cable of size 4 core 120 sq.mm on the building wall/PF Shelter/FOB with suitable size GI fixing hardware and stainless-steel nuts/bolts (Cable will be supplied free departmentally at Thiruvananthapuram and transportation shall be arranged by Railway. Loading/unloading shall be under contractor's scope). | — | — | — | 4,350 | |
| — | 250.00 | — | — | ||
| Transportation and laying / clamping/ threading of 4 core 70 sq mm XLPE cable through trench, cable protection pipe, wall/shelters, FOB etc as directed at site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the office of SSE/Electrical/W office at Thiruvananthapuram. | — | — | — | 19,000 | |
| — | 1700.00 | — | — | ||
| Transportation and laying / clamping/ threading of 4 core 16 sq mm XLPE cable through trench, cable protection pipe, wall/shelters, FOB etc as directed at site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the office of SSE/Electrical/W office at Thiruvananthapuram. | — | — | — | 1,02,000 | |
| — | 2.00 | — | — | ||
| Supply and fixing of cable gland suitable for 4 core x 120 Sq.mm Aluminium LTUG cable and termination using aluminium socket duly crimped with suitable size heat shrinkable sleeve. | — | — | — | 740 | |
| — | 8.00 | — | — | ||
| End termination using single brass compression gland of size from 4 core 70 Sq.mm with required aluminium sockets, etc.., Note: - Scope of work including supply and fixing of said glands, PVC type glands may be used for cable termination in the poly carbonate box as directed by site Engineer in-charge. | — | — | — | 2,520 | |
| — | 14.00 | — | — | ||
| End termination using single brass compression gland of Size from 4 core 16 Sq.mm with required aluminium sockets, etc.., Note: - Scope of work including supply ad fixing of said glands, PVC type glands may be used for cable termination in the poly carbonate box as directed by site Engineer in-charge. | — | — | — | 3,416 | |
| — | 240.00 | — | — | ||
| Excavation of cable trench 0.3 m wide x 1.0 m deep (preferably) in ordinary soil, back filling of the excavated cable trench (After laying of cables), ramming & consolidation properly. | — | — | — | 1,08,960 | |
| — | 7.50 | — | — | ||
| Excavation of cable trench 0.3 m wide x 0.1 m deep (up to the depth of tar/concrete) in tarred/concreted surface duly removing tiles/Granite stone wherever applicable and back filling of the excavated cable trench after laying of cables, ramming & consolidation properly. | — | — | — | 14,115 | |
| — | 7.50 | — | — | ||
| Concreting the top portion of the cable trench excavated in tarred/concreted surface to a depth of 10.0 cm with concrete, using 1:2:4 mix with M sand. | — | — | — | 64,867.5 | |
| — | 7.50 | — | — | ||
| Excavation of cable trench 0.3m wide x 1 m deep under Railway tracks (from formation level), duly removing stone ballast, back filling of the excavated cable trench (After laying of cable with HDPE pipe) , ramming and consolidation properly and providing back the removed stone ballasts. | — | — | — | 9,360 | |
| — | 22.00 | — | — | ||
| Supply & fixing of cast iron cable route indicator marked with " LT CABLE" including grouting with cement concrete. | — | — | — | 11,088 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of factory made MCCB DB 8-way wall / foot mounting type with screwed metal double door and made out of 12 SWG special grade CRCA sheet, powder coated, 250A Copper bus bar system and provision for neutral, with earth terminations on each side of the DB suitable for TP/FP MCCB Incomer and TP outgoing. Cable alley on both sides, Digital meter module including CT, RYB indicator, 250A ,25 KA, four pole,100% thermal adj MCCB, one number as incomer, 125A ,25 KA, three pole,100% thermal adj MCCB, six numbers as outgoing, extension terminals, spreaders and other necessary accessories including inter connections by adequate size insulated copper cables and connection of UG cables. | — | — | — | 2,22,794 | |
| — | 1.00 | — | — | ||
| Supply, erection testing and commissioning of MCB Distribution Board, three phase 4 way, IP-43 protected, CRCA sheet enclosure, powder coated with suitably rated insulated copper bus bars for phase and neutral, earth bars, shrouds, cement spill protector, colour coded inter- connecting wire sets, cable ties etc. as applicable and fitted with 1 number of 40 A 4 Pole MCB, 1 number of 40A , 100 mA 4 Pole RCCB, 6 numbers of 20A DP MCB's including internal wire and cable connections. | — | — | — | 12,310 | |
| — | 1.00 | — | — | ||
| Supply, erection testing and commissioning of MCB Distribution Board, single phase 12 way, double door, IP-43 protected, CRCA sheet enclosure, powder coated with suitably rated insulated copper bus bars for phase and neutral, earth bars, shrouds, cement spill protector, color coded inter-connecting wire sets, cable ties etc. as applicable and fitted with 1 No. 63A DPMCB, 1 No. 63A DP RCCB, 1No. 32A SP MCB, 4 Nos.16A SP MCBs and 3 Nos. 6ASP MCBs including cable connections. | — | — | — | 8,475 | |
| — | 10.00 | — | — | ||
| Supply, erection, testing and commissioning of octagonal poles of 4 m high with decorative single arm bracket. Top dia 70mm, bottom dia 130mm, sheet thickness 3 mm with suitable casting of cement concrete foundation and muffing Including supply, fixing of 40W to 50W LED Street light and wiring to the LED Fittings. Note: -Drawing to be submitted for approval before fabrication of octagonal poles. | — | — | — | 3,39,310 | |
| — | 2.00 | — | — | ||
| Supply, fixing and commissioning of 8-way double door, single phase MCB type distribution board with 25 A double pole MCB, 1 no of 25A 30mA double pole RCCB and 4 numbers of 16 A single pole MCB as outgoing complete in an approved manner as desired by the site in-charge Engineer. | — | — | — | 12,364 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 2 way 16 A MCB type changeover switch in metallic enclosure in an approved manner as desired by the site in-charge Engineer. | — | — | — | 1,962 | |
| — | 1.00 | — | — | ||
| Installation of 1.5/2 Ton inverter type split Air conditioner. | — | — | — | 1,521 | |
| — | 1.00 | — | — | ||
| Supply, fixing, concealing of MCB protected power unit of 20A-power socket unit with 20A -SP-MCB similar to Havells model No. DHDMCSN0251020 or similar /superior makes with sheets teel enclosure including internal wiring (For Provision of Split AC). | — | — | — | 850 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 12 module metal box with front plate in a concealed/ open manner as required at site. | — | — | — | 8,640 | |
| — | 5.00 | — | — | ||
| Supply and fixing of 8 module metal box with front plate in a concealed/ open manner as required at site. | — | — | — | 3,090 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 6 module metal box with front plate in a concealed/ open manner as required at site. | — | — | — | 5,180 | |
| — | 5.00 | — | — | ||
| Supply and fixing of 3 module metal box with front plate in a concealed/ open manner as required at site. | — | — | — | 1,515 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 2 module metal box with front plate in a concealed/ open manner as required at site. | — | — | — | 578 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 1 module modular blanking plate in the modular box. | — | — | — | 820 | |
| — | 100.00 | — | — | ||
| Supply and fixing of 5/6A single pole modular switch in modular box. | — | — | — | 9,800 | |
| — | 33.00 | — | — | ||
| Supply and fixing of 5/6A two module modular plug socket in the modular box. | — | — | — | 6,336 | |
| — | 3.00 | — | — | ||
| Supply and fixing of 15/16 A modular switch in the modular box. | — | — | — | 552 | |
| — | 3.00 | — | — | ||
| Supply and fixing of two module 15/16 A modular plug socket in the modular box. | — | — | — | 603 | |
| — | 4.00 | — | — | ||
| Supply and fixing of multipurpose fancy glass shelf/Mobile stand/ with heavy wall brackets. | — | — | — | 2,308 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 1 feet 5W to 7W LED tube light with fittings on as directed by site Engineer in charge. Note: - For the use of Bathroom/Mirror lightings. Preferable Makes: - Surya, Philips, CG, Bajaj, GE, Wipro, HPL or any other reputed makes. | — | — | — | 4,810 | |
| — | 31.00 | — | — | ||
| Fixing of 18 watts LED bittern wall mounting tube light complete with integral driver unit complete (detachable tube type) including extension of supply connection by PVC insulated copper cable. | — | — | — | 3,441 | |
| — | 14.00 | — | — | ||
| Fixing of LED recess mounted downlighter 36 watts, 2 x 2 feet including connection by pvc insulated copper cable. | — | — | — | 2,100 | |
| — | 40.00 | — | — | ||
| Fixing of 1200mm sweep, BLDC ceiling fan including extension of supply connection by PVC insulated copper cable. | — | — | — | 9,440 | |
| — | 65.00 | — | — | ||
| Fixing of 25 watts LED street light fitting including supply connection. | — | — | — | 12,285 | |
| — | 5.00 | — | — | ||
| Supply and fixing of G.I pipe of 25 mm dia , medium duty including bending the same suitably for fixing street light fitting, complete with suitable G.I fixing hardware on the building wall. | — | — | — | 1,650 | |
| — | 5.00 | — | — | ||
| Supply and fixing of 300 mm heavy duty exhaust fan including supply connection by 3 core x 1.5 sq.mm PVC insulated copper cable | — | — | — | 14,165 | |
| — | 5.00 | — | — | ||
| Supply and fixing of LED bulkhead luminaire 5/6 watts including extension of supply connection by PVC insulated copper cable. | — | — | — | 8,445 | |
| — | 45.00 | — | — | ||
| Supply and fixing/concealing of ivory colour ISI marked medium duty PVC pipe of 32 mm dia conforming to IS 9537 (PART-3), complete with bend, Ts, etc with fixing hardware (Clamping to be done at a spacing not more than 75 cm on building wall wherever applicable). | — | — | — | 6,660 | |
| — | 2200.00 | — | — | ||
| Supply and fixing/concealing of ivory colour ISI marked medium duty PVC pipe 25 mm dia conforming to IS 9537 (PART-3), complete with bend, Ts, etc with fixing hardware (Clamping to be done at a spacing not more than 75 cm on building wall wherever applicable). | — | — | — | 1,89,200 | |
| — | 400.00 | — | — | ||
| Supply and fixing/concealing of ivory colour ISI marked medium duty PVC pipe of 19/20mm dia conforming to IS 9537 (PART-3), complete with bend, Ts, etc with fixing hardware (Clamping to be done at a spacing not more than 75 cm on building wall wherever applicable). | — | — | — | 28,400 | |
| — | 50.00 | — | — | ||
| Supply and drawing of PVC insulated FRLS copper cable of 6 sq.mm three runs conforming to IS 694, through already erected PVC conduit including termination in a standard manner as required at site. | — | — | — | 11,500 | |
| — | 100.00 | — | — | ||
| Supply and drawing of PVC insulated FRLS copper cable of 4 sq.mm three runs conforming to IS 694, through already erected PVC conduit including termination in a standard manner as required at site. | — | — | — | 18,200 | |
| — | 2000.00 | — | — | ||
| Supply and drawing of PVC insulated FRLS copper cable of 2.5 sq.mm three runs conforming to IS 694, through already erected PVC conduit including termination in a standard manner as required at site. | — | — | — | 2,56,000 | |
| — | 600.00 | — | — | ||
| Supply and drawing of PVC insulated FRLS copper cable of 1.5 sq.mm three runs conforming to IS 694, through already erected PVC conduit including termination in a standard manner as required at site. | — | — | — | 51,600 | |
| — | 86.00 | — | — | ||
| Supply and fixing of 6A, 3 plate PVC ceiling rose, ISI marked including termination of wiring. | — | — | — | 6,622 | |
| — | 150.00 | — | — | ||
| Supply and erection of 300 x50 mm size 14 SWG hot dipped G I perforated tray for cable laying with suitable fixing arrangements as directed by Site Engineer. Preferable Makes: - JSW, ESSAR, TATA or any other reputed makes. Note: -The scope of work includes supply and fixing of suitable length and size of thread rods and strut channels etc.., including all other accessories for successful completion of the above work. | — | — | — | 1,42,650 | |
| — | 60.00 | — | — | ||
| Supply and erection of 4m high galvanized octagonal pole as per enclosed specification with 70 mm top dia130 mm bottom dia 3mm thick sheet and 200 x 200 x 10mm base plate with 4 Nos. 20mm dia and 450 mm long GI Foundation bolts including 600mm long single arm GI bracket for fixing light fittings. | — | — | — | 10,82,280 | |
| — | 15.00 | — | — | ||
| Design and casting of M-15 RCC foundation with 8 mm steel rod reinforcement for the octagonal pole complete with materials. | — | — | — | 2,43,120 | |
| — | 60.00 | — | — | ||
| Supply and fixing of 1 No. 16A fuse unit, 1 No. 20 A 4-way SMC connector in 5 mm thick SMC sheet inside the octagonal pole with suitable fixing hardware. | — | — | — | 36,600 | |
| — | 60.00 | — | — | ||
| Supply and wiring to /street light luminaire points through octagonal pole with 3 core 1.5 sq.mm PVC insulated Copper wire. | — | — | — | 26,880 | |
| — | 8.00 | — | — | ||
| Supply and fixing of poly carbonate box similar to Hensel model number Mi0600/0601 in the plat form shelter for cable termination with 6 numbers of 25x3x200 mm Copper Bus bar ,8 numbers of 2 A single pole MCB . Note: - 2.5 sq.mm size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multi stranded flexible copper cable with ISI mark has to be used for connecting between copper bus bar and MCBs and Out going from MCBs has to be neatly wired and covered as directed by site Engineer in-charge. | — | — | — | 1,67,768 | |
| — | 8.00 | — | — | ||
| Supply and fixing of transparent polycarbonate box similar to model number Mi 0300/0301 in the platform shelter for cable termination with 1 number of 200A 4-way connector. Note: - For 24 hours supply tapping points. | — | — | — | 66,728 | |
| — | 2.00 | — | — | ||
| Supply and fixing of transparent/opaque poly carbonate box hinged type similar to model No. Mi0220/Mi 0221 fitted with one number of 100A 4-way connector. | — | — | — | 16,738 | |
| — | 48.00 | — | — | ||
| Fabrication, supply and fixing of MS angle of size 32X32X6mm (1 - 2M long) with 25X6 mm MS flat (Total length approximate 2 M made into 2 pieces of suitable length) on platform shelter complete with suitable clamps, nuts, bolts etc. including painting (for fixing box type LED tube fitting on platform shelters) | — | — | — | 35,520 | |
| — | 24.00 | — | — | ||
| Supply and fixing of hooks by using 40x6mm MS flat for fixing Ceiling fan in the PF shelter. 8mm Steel rod has to be used for "S" hooks and fixed in the MS flat. Note: - Two cots of Aluminium painting have to be done on the MS flat and hook. | — | — | — | 14,592 | |
| — | 72.00 | — | — | ||
| Fabrication, supply and fixing of 16 SWG MS painted sheet steel box of size 150 x 100 x 53 mm with 3.0 mm thick phenolic laminated sheet top and fitted with 1 No. ceiling rose, 1 No. 5 A flush type fuse unit completely pre-wired. | — | — | — | 32,544 | |
| — | 48.00 | — | — | ||
| Supply and fixing of industrial box type LED fitting (Twin tube type with replaceable 16/18 W LED tube 2 numbers) on platform shelter and supply connection by 2 core, 1 sqmm PVC insulated copper cable similar to Crompton model No. IGP132LT8-16 | — | — | — | 43,104 | |
| — | 2.00 | — | — | ||
| Supply and fixing of poly carbonate box similar to Hensel model No. Mi0100/0101 for PF light control with the one number of on delay timer similar to L&T model No. GIC12ODT4 with 1 number of contactors. | — | — | — | 11,730 | |
| — | 2200.00 | — | — | ||
| Supply and laying of 6 SWG GI wire in the cable trench including proper termination at the existing platform lamp post using GI bolt and nut. | — | — | — | 59,400 | |
| — | 54.00 | — | — | ||
| Provision of earthing arrangements as per drawing No.V/E.G. 362 and connecting with earthing terminals by means of 2 runs of 6 SWG G.I wire | — | — | — | 3,34,422 | |
| — | 300.00 | — | — | ||
| Design, Survey, Proposal with Technical Elevation Drawings & 3D layout, Manufacture and Display of wall / hanging / floor / pole mounting type LED illuminated, Modular, Changeable Aluminium extruded profile signage / direction board in Full/Half/Semi Parabolic and Elliptical square and multi angle shape, with die molded internal structural brackets (Nylon/SS) and aluminium extruded heat sink. Suitable size end cap PC/SS304 should be provided with provision of illuminated Logo. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter vision angle shall not be less than 160 degree and visibility is not less than 75%. The approved color text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. A pole with grooves for tricolor LED/Neon light installation. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. As per attached Detailed Specification. | — | — | — | 4,05,000 | |
| — | 300.00 | — | — | ||
| Erection, Installation and testing of wall / hanging / floor / pole mounting type LED illuminated, Modular, Changeable Aluminium extruded profile signage / direction board in Full/Half/Semi Parabolic and Elliptical square and multi angle shape, with die molded internal structural brackets (Nylon/SS) and aluminium extruded heat sink. Suitable size end cap PC/SS304 should be provided with provision of illuminated Logo. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter vision angle shall not be less than 160 degree and visibility is not less than 75%. The approved color text and graphics shall be printed router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. A pole with grooves for tricolor LED/Neon light installation. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. As per attached Detailed Specification. | — | — | — | 33,900 | |
| — | 200.00 | — | — | ||
| Design supply erection testing & commissioning of LED station name board in English, Hindi and Malayalam as per enclosed specification | — | — | — | 5,60,000 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Transparent Poly carbonate box similar to model No. KG 9002 in the PF shelter for cable termination with 1 No. of 64 A 4-way Connector. | — | — | — | 5,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
tender document
ATTACHMENT
Earthing.pdf
ATTACHMENT
AnnesureIII.pdf
ATTACHMENT
Annex.VIB.pdf
ATTACHMENT
jjj.pdf
ATTACHMENT
TenderDocumentE-624717.pdf
ATTACHMENT
jjj.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .