SPECIAL REPAIRS TO LGS SECTION AT AF STN BAREILLY UNDER GE (AF) BAREILLY

Amount

B&R Portion : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the debris from site to outside MoD land.

M&L for 25 mm thick cement concrete (1:2:4) type B-O using 12.5 mm graded crushed stone aggregate as in sub base all as specified.

M&L for 15 mm thick screed bed or bedding layer cement mortar (1:6) for laying floor finishes all as specified.

M&L for 10 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall and finishing the surfaces fair and even for tiles all as specified.

M&L for vitrified ceramic tiles (first quality) 8 to 10 mm thick (Square/rectangular) polished area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified.

M&L for glazed ceramic digital coloured/printed tile (first quality) of size 600 mm X 300 mm X 7mm thick as in vertical surface such as dado, skirting, wall etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar all as specified.

M&L for 18 to 22mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for 20 mm thick screed bed or bedding layer cement mortar (1:6) for laying floor finishes all as specified.

Dismantling of false ceiling boards any thickness including cover fillets including frame complete all as specified.

S&F for false ceiling at height with GRG (Glass fibre reinforced gypsum) false ceiling tiles of size 595 mm X 595 mm of approved texture, design and pattterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8825: 1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended inter locking metel T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both side) comprising of main-T runners of size 15X12 mm of length 3000mm,cross-T of size 15X12 of length 1200 mm and secondary intermidate cross-T of size 15X12 mm of length 600 mm to from grid module of size 600X600 mm suspended from ceiling using Galvanized mild steel items( galvanizing @ 80 grams per Sqm) i,e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm Galvanized iron perimeter wall angle of size 24X24X0.40 mm of lenght 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall good screw.all as specifed and directed.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water complete all as specified.

M&L for 15 mm thick rendering in cement mortar(1:4) on brick or concrete surfaces including finishing surface even and fair including mixed with liquid WPC as per manufacturer instruction complete (Note :- WPC will be measured and paid separately).

M&L for 15 mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surfaces including finishing surface even and smooth without using extra cement.

Supply only liquid water proofing compound as specified.

M&L for applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over newly or untreated plastered surfaces of wall to be applied of five different shades in camouflage pattern (Specific pattern as directed by Engineer-in-Charge) by allowing 6 to 8 hrs to dry the surface for painting of subsequent coats complete all as specified.

M&L for complete removal of exiting treatment on wall complete all as specified.

M&L for prepration of newly plastered surfaces of wall complete all as specified.

M&L for applying two coats of oil bound distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified.

M&L for applying 3 mm thick (average thickness) wall care putty on wall and finishing the walls to an even and smooth surface by sand papering etc complete all as specified.

Demolition of brick work built in any cement mortar or cement lime mortar including all quions, arches, pillers etc including removing the debris from site to outside MoD land.

M&L for fly ash brick work using old size brick, straight or curved on plan exc 6.0 mtr mean radius and built in cement mortar 1:6 all as specified.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including removing the debris from site to outside MoD land.

M&L for reinforced cement concrete (nominal mix) type- A-1, 1:1.5:3 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilaster and buttresses complete all as specified.

M&L for reinforced cement concrete (nominal mix) type- A-1, 1:1.5:3 (using 20 mm graded stone aggregate) in foundations including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified.

M&L for reinforced cement concrete (nominal mix) type- A-1, 1:1.5:3 (using 20 mm graded stone aggregate) in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves complete all as specified.

M&L for reinforced cement concrete (nominal mix) type- A-1, 1:1.5:3 (using 20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified.

M&L for reinforced cement concrete (nominal mix) type- A-1, 1:1.5:3 (using 20 mm graded stone aggregate) in beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified.

M&L for mild steel TMT bars 10 mmm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, looking ends and binding with and including mild steel wire not less than 0.90mm dia complete all as specified.

All as per item No 29 above but 8 mm dia and over upto 10 mm dia in stirrups, spacers and binders all as specified.

M&L for formwork to faces of walls,retaining walls, abutments,parapets and staircase railing sand similar work including attached pillasters, buttresses,etc.; vertical or to batter for fair finished surfaces complete all as specified.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfacefor fair finish surfaces of concrete complete all as specified.

M&L for formwork to sides and soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick(horizontal or sloping) complete all as specified.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions Square rectangular or polygonal on plan for fair finished surfaces complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removing the debris from site to outside MoD land.

M&L for 100mm thick cement concrete type D-2, 1:4:8 nominal mix (40mm graded stone aggregate) as in sub base of floor and pavement all as specified.

M&L for 100mm thick cement concrete type B-1, 1:2:4 nominal mix (using 20mm graded stone aggregate) in floor and pavement including finishing surface even and fair all as specified.

M&L for forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified.

S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified.

S&F for rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed alusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer and complete all as specified.

Dismantling brick tiles of any thickness or description including removal to existing treatment from roof including and cleaning of roof complete all as specified .

M&Lfor roughening existing roof surface and provide PCC type B-1 1:2:4 mix (using 20 mm graded stone agg) as in levelling coarse including removing the debris from site to outside MoD land.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over hot blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sqm over a coat of bituminous primer @ 0.4 Kg/Sqm over 15mm thick screed bed in cement mortar 1:4 mixed with water proofing compound when levelling coarse is still green laid with 100mm side lap and end lap on prepared surfaces as per manufacture’s instruction complete all as specified.

M&L for factory made cement concrete tiles machine pressed of size 250 mm x 250 mm x 20 mm thick as per IS 1237-1980 with gray cement and pigment laid over 15mm screed beding layer in cement mortar 1:4 and joints grouted flush in cement mortar (1:3) over membrane complete all as specified.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 mixed with liquid water proofing compound all as directed.

M&L for cement concrete type B-1, 1:2:4 nominal mix (using 20 mm graded stone aggregate) as in coping, parapets , bed plates, kerb and the like rounded or chamfered on edges complete all as specified.

Taking down rainwater pipes (any size or pattern), including all fittings (measured overall as fixed along the centre line over fittings) and accessories complete all as specified.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including clamp all as specified.

S&F for 110 mm bore PVC (SWR) bends any radius all as specified.

Taking down chowkat or frame with shutter( without taking off shutter from frame ) area not exc 1.5 sqm each all as specified.

Taking down chowkat or frame with shutter( without taking off shutter from frame ) area exc 1.5 Sqm and not exc 4 Sqm each all as specified.

S&F for anodised powder coated aluminium (thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified.

S&F for anodised powder coated aluminium (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for anodised powder coated aluminium (thickness or powder coating not less than 50 micron) frame for doors, window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F for anodised powder coated aluminium (thickness or powder coating not less than 50 micron) grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with stainlesssteel screws @ 200 mm centre to centre, including cutting the grill toproper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 Sqm in each pane

S&F for 5.50 mm thick sheet glass (tinted/ reflective type) in square each pane complete all as specified.

S&F for 12mm thick prelaminated boards, grade 2 quality, interior grade, decorative type with decortive face veneer with decorative face veneers on both faces fixed at site as per specification complete all as specified.

S&F for 300 mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections all as specified.

S&F for 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F for mortice lock,vertical type, size 75 mm aluminium 4 Levers

S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed fixed complete all as specified.

E&M PORTION : Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting and making good disturbed surface to match with existing complete all as specified

Taking down old unserviceable submain wiring any type and size (aluminium/ copper) including batten/ conduit and making good disturbed surface to match with existing all as specified.

M&L for point wiring with 1.5 sqmm (nominal area) FRL-SH PVC insulated unsheathed multi stranded copper conductor 1100 volts grade in and including PVC conduit (ISI marked) with all accessories such as bends, cross, elbow, tees etc. of suitable size including concealed mild steel pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting fixtures etc and 3 mm thick laminated sheet top cover (ISI marked) including continuous earth wire FRLSH PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor 1100 volts grade connecting to common earth and earth dolly for one light point/ fan point controlled by one way switch all as specified.

All as per Item No. 68.00 here- in-before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 68.00 here-in-before but for one 3 pin 6 Amp socket out let point on same board.

All as per item No 68.00 above but for 3 pin 15 amps socket outlet on independent board with 2.5 Sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as contineos earth wire, all as specified

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free Non-Toxic Non-Corrosive Electric Cable with multi stranded copper conductor of size 1.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enaM&Led black conduit heavy duty ISI marked of size 20mm dia surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad, duly earthed with same cable as for wiring above but green in colour as continuous earthing wire connected to earth dolly complete all as specified and directed by Engineer-in-Charge for one light/ fan point controlled by one flame proof rotary switch SP one way.

M&L for submain wiring concealed complete with two runs of 1100 Volts grade 4.0 Sqmm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLSH grade drawn through and including 25 mm dia non metallic rigid Steel conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4.0 Sqmm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLSH grade as earth continuity conductor all as specified.

S&F in replacement of flame proof weather proof for installation in hazardous area as per IS-2148/ 81/ LED Tube light fitting epoxy powder coated with provision of cable glands duly tested and certified by CMRI Dhanbad suitable for and including 16/20 Watt LED Tube made out of cast iron aluminium alloy LM-6 enclosure with clear heat resistant borosilicate glass tubing spring loaded non sparking bipin lamp holder built in control gear fitted with copper wound ballast condenser starter all accessories prewired including 02 Nos M-20 cable entries mounted on wall/ column steel structure complete all as specified. Make- Sudhir/Shyam/Balinga/ Bajaj

S&F in replacement of Flame Proof Control Panel Box size 330x350x190mm(SPN 6 WAY) main Incomer 32 AMP Double Pole MCB-1 Nos Out going 6 Amp 1 P MCB-04 Nos complete all as specified. Make- Sudhir/Shyam/Balinga/ Bajaj

S&F in replacement of flameproof, weather proof direct entry type rotary switch with cable terminal box in cast aluminium alloy LM-6 enclosure epoxy powder coated single pole 230 volts 10 Amp ON/ OFF switch AC certified by CRMI for group II-A & II-B including compression glands complete all as specified and directed. Make- Sudhir/Shyam/Balinga/ Bajaj

S&F in replacement of flameproof switch socket & plug combined in LM6 cable termination box in LM6, 25 Amp, 250V, 2P+earth complete all as specified. Make- Sudhir/Shyam/Balinga/ Bajaj

M&L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 4.0 Sqmm and one single core PVC insulated FRLSH flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified.

M&L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 6.0 Sqmm and one single core PVC insulated FRLSH flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified.

M&L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 10 Sqmm and one single core PVC insulated FRLSH flexible copper conductor cable green colour of size 10 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified.

S&F in replacement of wall/surface mounted type LED light fitting batten type complete with LED 1x 20 Watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete including taking down all as specified and as directed. Make : Philips Cat Part No BN 021C LED 20S PSU CW GR S2 / Havells Cat Part No : ENDURA LINEAR NEO BS 20W LED 865 SPC WH or equivalent make of Wipro.

S&F in replacement of wall / surface mounted type LED light fitting batten type complete with LED lamp 10 Watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete including taking down all as specified and as directed. Make : Philips Cat Part No BN 021 LED12S 6500 PSU GR / Havells Cat Part No : ENDURA LINEAR NEO BS 10W 865 SPC WH or equivalent make of Wipro.

S&F in replacement of recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed including taking down existing unserviceable light fitting. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]

M&L in replacement of angle holder insulated body with back plate with & including LED Lamp 7 Watt suitable for batten fittings complete all as specified.

S&F in replacement of switch piano flush type single pole one way 5/6 Amp all as specified.

S&F in replacement of Bell Push, flush type, 5 Amps, Single pole, one way, 230 Volts AC circuit all as specified.

S&F in replacement of Bell (Ding dong, 230 Volts AC circuit single pole complete all as specified and directed.

S&F in replacement of socket outlet 2 in 1, 3 pin, 5/6 & 15/16 Amp flush type complete all as specified.

S&F in replacement of socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.

S&F in replacement of switch piano flush type single pole one way, 15/16 Amp complete all as specified.

S&F in replacement of rotary type electronic fan regulator 5 Step AC, 230V, Single phase, complete all as specified.

S&F in replacement of ceiling rose surface type 3 terminals 65x20mm compelete all as specified

S&F for flush mounting, factory made V TPN DBs-DPX-250 MCCB DB's, IP-43 protection-IK09 with metal door with 250 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 250 MCCB as incomer and 24 Nos. MCB's, SP, as outgoing etc including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F for flush mounting, factory made V TPN DBs-DPX-160 MCCB DB's, IP-43 protection-IK09 with metal door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB as incomer and 18 Nos. MCB's, SP, as outgoing etc including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified.

S&F in replacement of MCCB 125 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified.

S&F in replacement of MCCB 160 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified.

S&F in replacement of sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F for sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F for sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wallincluding taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F for sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 16 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F in replacement of MCB single pole 240 volts, 'B' curve of rating from 6 to 32 Amps with rupturing capacity 10 KA including providing thimble for out going cables.

S&F in replacement of MCB, TPN 415 volts, 'B' curve of rating from 63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables all as specified

S&F in replacement of MCB SPN 240 volts, 'B' curve of rating from 40 to 60 Amps, with rupturing capacity 10 KA including providing thimble for out going cables all as specified.

S&F in replacement of MCB single pole and neutral enclousers with a two pin and earth plug and socket complete with and including on MCB single pole 20 Amps 240 volts all as specified

M&L for making horizontal hole by mechanical boring under hard standing, pavements or roads for insertion of GI pipes 40 to 80 mm bore and making good the disturbed surface complete all as specified

Excavation in trenches in soft/ loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out all as required for laying of cables all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material (Soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed.

M&L for well burnt Sub class 'B', old size bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick all as specified.

M&L in repair 50 mm bore light grade ISI marked GI tubing laid in trenches or inserting in horizontal boring for cable protection all as specified & as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core including taking out existing cable complete all as specified.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including taking out existing cable complete all as specified.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core including taking out existing cable complete all as specified.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results on a 3.0mm thick painted M.S. earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round M.S. rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the ground all as specified an directed.

S.K.Enterprises (BID ID -3486057)

M/s Agarwal Builders (BID ID -3480875)

M/s M Aali construction co (BID ID -3488227)