Mini highmast in Enthumoodu Junction

Amount

Mini Highmast

Supply of 8M Octogonal pole (BOP8030) - Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm, base plate of 200x200x12mm and Foundation bolt set of EN8 grade M20x600mm A flush door shall be provided at the bottom portion of the pole for cable termination and to mount the control accessories ( M/s Bajaj ,Philips or equivalent).The cost is inclusive of two years fully comprehensive maintenance gaurantee for all parts.

Supply and providing 1000 mm hot dip galvanised Single Arm mounting brackets along with spigots matching with the above pole which shall consist of a standard arm cap, fixing the same on the pole top as required.

Supply and providing bakelite sheet with MCB and stud terminals for mounting inside base compartment of pole

Supply of 7 Nos M16x600 mm long 'J' type foundation bolts (EN 8 grade)

Charges for conveyance and errection of lamp post in the pre fabricated concrete base using bolts and nuts supplied along with the pole .

supply ,testing and commisioning of 120 W LED light (M/sPhilips/Bajaj/equivalant make)

Earth work excavation in hard soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work.

Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only)

Supplying and clamping the following sizes of corrugated PVC flexible conduit with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required. 16 mm dia

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2.50 sq mm 2 run

Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4 core 1.00 sq. mm.

Supply and installation of the following accessories suitable for 50 Hz AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required 25 A double pole mini break isolator

Programmable time switch 24 Hour

2 pole 25 A contactor with AC coil

Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

Supply and providing RCC covering slab constructed with the following for the inspection chamber of earth pit as required Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. 2 x 25 x 3 mm G.I strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.25 x 3 mm GI strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.25x3mm GI srtip

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

S&P the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 25 x 6 mm brass bolt & nut

Fabrication, supply & installation of dust and vermin proof, wall mounting, plastic meter box of folowing size suitable for fixing KSEB meter,box

&F following accessories in the existing meter board and giving connections 32Afuse holder for BS type offset tag fuses

32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

20-32 A, bolted offset tag type fuse link of size A1

S&Iof supports, anchor bolts made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

Provision for Horizontal Road drilling / cutting concrete road or bitumen road for drawing UG service cable from mast to KSEB LTPost providing suitable size protection pipe and concreting road as required and obtaining permission from PWD Road, KWA,BSNL and other related authority if required

Amount to be deposited with KSEB for availing service connection (actual amount will be reimbursed on production of original documents)

SUNNY MATHEW