15th Finance commission

NAME OF WORK :- Drilling of tubewell by D.R.Method Near Santrampura ESR , Near Collage

Railwaycrossing Backside Telephone Exchange And Khambhati Bhagod Sekhdi Road in Petlad.

Description Quantity Rate Per Amount

1 Drilling of pilot bore hole of size 300/250 mm at above site in all

strata by mud flush direct rotary ring. 375.00 749.00 Rmt

2 Remaining of 400mm dia. Reaming bore hole including

assembling, jointing, lowering of housing casing, screen pipes &

other assemble items with gravel packing and clay balls

packings etc. complete. 375.00 230.00 Rmt

3 Manufacture, Supply & Delivery of Electric Resistance Welded

(Up to 400mm)/Submerged Arc Welded(Above

400mm) M.S.Pipe having beveled ends plate or coil conforming

to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including

all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete. (Rate for MS

Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) &

Rs. 59000.00 per MT without GST (Above

mm) as onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) - I/S

epoxy Painting (100 Micron) & O/S Gunniting (25 mm Thick) -

219.1 mm 4.5 mm Thickness 360.00 2023.00 Rmt

4 Job work of slotting of M S ERW blind pipe of following size

having slot size as 6.75 cm x 6.35 cm x 3.12 mm (including

unloading of blind pipes from truck & reloading slotted pipes

into truck). for 200mm dia. 57600.00 0.22 Per Slot

5 Uptronmake electro logger with carting including idle and

working hours. 3.00 1800.00 Job

6 Best Quality of well sorted sevaliya gravel of size 4mm to 6mm

at site if work including liading, unloading, carting etc.

complete. 36.73 2029.00 Cu Mt

7 Cement sealing if necessary without cost of cement by means of

mud pump. Bottom Sealing 3.00 13273.00 Job

8 Clamp made from MS Plate with 3 holes on either side with nuts

and bolts of standard and suitable size, 750 x 75 x 16mm flat to

200mm dia. Pipe. 3.00 1627.71 Pair

9 Bore plug having 100 mm height made from M.S. plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts-bolts & lock nuts of std. Make

complete. Bore plug having 100mm height made from UPVC of

std. make Suitable for 200 mm dia pipe.

10 Supply of UPVC Bail plug (bottom cap) suitable for 200mm dia.

Pipes. 3.00 822.05 Nos

11 Geohydrological ground water investigation (with water sample

& With vehicle charges) 3.00 14286.00 Nos

12 Development of Bore by air compressor of 600 cfm/150 psi

capacity for minimum 6 hours or upto the availability of sand

free discharge. 3.00 22205.00 Nos

13 3 Phase Borewell Submersible Pump Sets Electric motor driven

borewell submersible pump set confirming to IS 8034 and

motor confirming to IS 9283 working at 3 phase 400 / 440 volt

50 Hz AC supply & 2900 RPM - Discharge :- 800 LPM , Head

14 Auto transformer starter suitable for local & remote pump

control application consisting of Auto Transformer (vacuum

impregnated, air cooled having three (3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay and contactors

as per Type II coordination including digital MFM with RS

communication port, analogue type ammeter with selector

switch, run hour meter, required protective relays & control

accessories A. T. S. from 36 to 45 HP

15 Manufacture, supply and delivery of 125 mm nominal dia. UPVC

column pipes including PVC socket (coupler), density of iipe

to 1.43 gm per cm3 , OD: 87.5 to 88.2 mm, Wall thickness End:

15.31 mm to 18.60 mm, Barrel: 11.72 mm to 14.06mm, Length:

3 meter. For New Bore 345.00 624.47 Rmt

16 Manufacture, supply and delivery of 125 mm size CI pipe

adaptor and pump adaptor for UPVC column pipes. 3.00 1530.20 Nos

17 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of

jointing meterial etc. complete. - Test Pressure 10kg/cm2

18 Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

conveyance from stores to site of works including cost of

labour, material, cement solvent. giving satisfactory hydraulic

testing as per ISi code 125 mm Dia 150.00 24.15 Rmt

19 Excavation for pipeline trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as per

required gradient and line including safety provisions using site

rails and stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lift and strata as

specified 0.00 To 1.50 Mtr - Soft Soil

20 Providing bedding incl. ramming, watering, levelling,

consolidating etc.Complete as per standard and instruction of

enaineer incharge As above with selected excavated earth

available near site 12.00 69.00 Cu Mt

21 Refilling the pipeline trenches incl. ramming, watering,

consolidating desposal of surplus stuff as directed within a

radius of 3 km. Refilling as directed 130.57 25.30 Cu Mt

22 Providing and supplying ISi mark Cl D/F Sluice Valves as per IS

14846 (Latest Edition) of following class and diameter including

all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete PN-1 With hand

wheel /cap operated (PD type short body) -125 mm Dia Valve

23 Providing and supplying ISi mark Cl D/F Reflux Valves as per

15:53 12 (Latest Edition) of following class and diameter

including all Taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. Complete - 125 mm Dia Valve

24 Lowering, laying and jointing in position following C. I. I D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete - 125 mm

Dia 6.00 550.85 Nos

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed

MCCB conforms to IS / IEC 60947-2 with trip free mechanism,

current limiting type with Thermal-Magnetic / Microprocessor

release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all

necessary Electro-Mechanical protections & interlocks etc.

MCCB module, when used as Incommer / Bus Coupler, shall

have enclosure dimensions- 1800(H) x 600(W) x 600 (D) &

following technical features:

4 Pole, 160A MCCB with Breaking Capacity of Icu=50 KA at 415V

(Ics =100% of Icu), Microprocessor release :-

26 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity (a)

6 to 32 Amp. Cat III 9.00 590.00 Nos

27 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size.

(G) 3 core 16 Sq. mm

28 Supply, laying, testing & commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with necessary

clamps / in existing cable trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per site requirement)

conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following

sizes: 3.5C x 120 sq. mm. A2XFY Cable (1Run for Incomer)

3.5C x 25 sq. mm. A2XFY Cable (1Run for Starter ) 30.00 134.00 Mtr

3C x 70 sq. mm. A2XFY Cable (1Run each for 2nos. Motor) 30.00 243.00 Mtr

29 CHEMICAL EARTHING SYSTEM

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

30 Designing (aesthetically} and constructing R.C.C frame structure

of pump room with positive suction / Negative suction Without

Gantry structure (Upto 3.60 M) Note:-

1. Minimum 15 % opening for ventilation should

2. Pump room rolling shutter, door and windows

of aluminium section and window grill of iron

should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1

meter above GL.

4.Cost does not include foundation for pumping

machinery. ( Out To Out Dimension 4.20 x 4.20 Mtr ) 52.92 11920.53 Sq Mt

31 Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and

accessories (c) 3 wire 1.5 sq. mm

32 SITC of Point wiring for Light / fan / Bell / Primary Point with

2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of

ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper

wires, pipe to be erected concealed in flushed on wall /

ceiling, complete with 6A Tissino Type ISI marked flush type

switch / bell push & accessories erected on metal / PVC Box

covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet

with necessary lamp holder / ceiling Rose / H. D. connector as

directed with medium class Rigid PVC pipe & accessories.

33 LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of co-extruded polycarbonate

channel with diffuser part in needed opal finish with company

mark/name 160V to 270V, Power Factor more than 0.9, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver

(ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

34 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) 6 wAY

35 Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate

any electronic component for following Max. rating erected as

directed. 40 Amp Cat - III

36 Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (a) 6 to 32 Amp.

Cat III 9.00 573.00 Nos

37 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity (a)

6 to 32 Amp. Cat III 9.00 590.00 Nos

38 SAFETY ACCESSORIES

Supplying & erecting carbon dioxide (CO2) fire extinguisher user

of following capacity with necessary clamps made from 50 x

mm M.S. Flat with nut & bolts grouted in wall complete. [B] For

5.5 / 6.5 KG Capacity 6.00 8586.00 Nos

39 Supplying stand first AID box with antiseptic cream, medicine

for use on wounds due burn, crepe bandage, gauge bandage,

medicated ready to use bandage (Band-aid) adhesive tape for

medicinal user, Scissors, anti-septic solution (Savlon or similar)

etc. (All above contents shall be of standard makes)

40 Providing and fixing printed instruction chart both in English and

Gujarati and duly framed with front glasses, for treatment of

person suffering from Electric shock with minimum 50"

diagonally size. ( For LT Room ) 6.00 129.00 Nos

41 Supplying rubber matting of following thickness as per

Add 3 % Contigency :

GEB Connection:-