Repair/Replacement of internal wiring and allied work in OTM Accn at YOL CANTT

Amount

PART-I:- Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including light fiitings any type, switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, tube light fitting, regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes and all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified.

Point wiring with 1.5 Sqmm copper conductor FRLSH (Multi strand) PVC insulated ISI Marked unsheathed cable in and including PVC casing capping, ISI marked of suitable size with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRSH as phase, neutral and earth wire connected to common earth dolly and including concealed pressed steel/ cast iron of suitable sizes terminal boxes made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (ISI marked) for one light point or one fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed. Note:-i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. ii) The wire from switch board to ceiling rose shall be of 2x1.5Sqmm +1x1.5sqmm rates for the same shall deemed to be included in item.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the independent board, all as specified and directed.

All as per Srl item No. '03' hereinbefore but for 3 pin 15 amps socket out let on independent with 2.5 Sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.

Switch piano flush type, single pole, one way, 6 Amps 230V, all as specified.

Switch piano flush type, single pole, one way, 16 Amps 230V, all as specified.

Switch socket outlet Two -in -One 3 pin 6 Amps flush type, 230 volts AC multipurpose, all as specified.

Switch socket outlet Two -in -One 3 pin 6 and 16 Amps flush type, 230 volts AC multipurpose, all as specified.

Fixed in repair ceiling fan regulator step type, electronic type on the existing phenolic laminated sheet etc. varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans, all as specified.

Ceiling rose, three phase, PVC/Polycarbonate, insulated body, fixed in repair all as specified.

Switch, bell push, piano flush type, SP one way 5 Amps, fixed in repair all as specified.

Bell electric, ding dong AC 230V, single pole, fixed in repair, complete all as specified.

Switch piano flush type, single pole, one way, 6 Amps 230V, fixed in repair, all as specified.

Switch piano flush type, single pole, one way, 16 Amps 230V, fixed in repair, all as specified.

Switch socket outlet Two -in -One 3 pin 6 Amps flush type, 230 volts AC multipurpose, fixed in repair, all as specified.

Switch socket outlet Two -in -One 3 pin 6 and 16 Amps flush type, 230 volts AC multipurpose, fixed in repair, all as specified.

Switch socket combination Two -in -One 3 Pin, 6 Amp Amp flush type, fixed in repair, all as specified.

Switch socket combination Two -in -One 3/5 Pin, 6 Amp & 16 Amp flush type, fixed in repair, all as specified.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in repair, complete all as specified and directed.

Supply and fixed in repair LED Bulb 9 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.

Supply and fixed in repair 3mm thick backelite sheet (hylam) as sheet cover with PVC Box of size 8''x10'' for fixing switches, sockets & regulators etc. Complet all as specified and directed.

Supply and fixed in repair 3mm thick backelite sheet (hylam) as sheet cover with PVC Box of size 7''x4'' for fixing switches, sockets & regulators etc. Complet all as specified and directed.

Supply and fixed in repair 3mm thick backelite sheet (hylam) as sheet cover with PVC Box of size 4''x4'' for fixing switches, sockets & regulators etc. Complet all as specified and directed.

Supply and fixing in repair MCB protected socket (modular AC box) 3 module with MCB SP of capacity 25 Amps and power socket for geyser, complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug top and socket complete with one double pole MCB 20 Amps, complete all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, all as specified.

M & L for vertical DB iron clad factory made TPN 4 Way, MCCB as incomer and MCB SP as out going 415V 3 phase 50C/s, double door DB IP 43 protection level, incl Blanking plate, lugs etc complete and neutral link with one MCCB 4 pole 415V 63 Amps rating with rupture capacity 16KA incl connection, fixing flushed to wall, necessary grouting, making good with CM 1:4 and painted to match exisitng wall color, fixed in repair, complete all as specified and directed.

MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB SPN 32 Amp, 240 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB SPN 63 Amp, 240 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB TPN 63 Amp, 240 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

Replacement of Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 6 Sqmm and drawn into and including surface PVC casing & capping of suitable size with all fittings/ accessories, junction boxes 1 to 4 way 25mm dia and connected to common earth dolly, complete and as directed. Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 6 Sqmm, shall be measured as one RM).

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, including taking down old, complete all as specified and directed.

Supply and fixed in repair octane LED panel drivers with universal connector suitable for 36 watt LED panel of size 600mmx600mm including taking down unsv light and fixing in ceiling after repair, complete all as specified and directed.

Supply and fixed in repair octane LED panel drivers with universal connector suitable for 15/18 watt LED panel of size 600mmx600mm including taking down unsv light and fixing in ceiling after repair, complete all as specified and directed.

Supply and fixing round/square shape 15W 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 10 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed.

Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed.

Supply and fixing of 30Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens enbedded PC cover having TOP opening seperate toughtned glass/verminproof driver compartment, SPDs with IP65 protection and impact resistance of IK07, suitable for pole dia 43mm (max) connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32mm dia lenght 1.2m along with clamps, including taking down old light, complete all as specified and as directed.

Supply and fixing decorative wall lighr fixture made up of polycarbonate, with 9W LED lamp B22 base complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking out old light, complete all as specified and directed.

Supply and fix modular switch out 6 Amps, 1 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular switch out 16 Amps, 1 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular socket out 6 Amps, 2 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular socket out 6/16 Amps, 2 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular bell push with indicator 6 Amps, 1 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular cover plate with frame, 2 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular cover plate with frame, 3 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular cover plate with frame, 4 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular cover plate with frame, 6 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular cover plate with frame, 8 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular metal flush box 4 module, as per existing make, Fixed in repair, complete all as specified.

Supply and fix modular metal flush box 6 module, as per existing make, Fixed in repair, complete all as specified.

Replacement of Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE :- Item of earthing includes the cost of 7.5m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work.

smc engineering company

ess are electricals and electronic

RIHANA ENGINEERS

S K MAHAJAN