Renovation of Main Hall of Rourkela Club under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hock

“Renovation of Main Hall at Rourkela Club” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs related to safety & welfare of

employees required enhancing quality of life in Steel Township at Rourkela (Odisha).

B Total Amount i/c GST (DSR + Non-DSR):- 1,93,78,329

Digitally signed by

PRIYA PRIYA KUMARI

“Renovation of Main Hall at Rourkela Club” under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and

other jobs related to safety & welfare of employees required enhancing quality of life in Steel Township at Rourkela (Odisha).

DSR Non- DSR

Acoustical Plain False Ceiling

Plain False Ceiling

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer

1 12.45 in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) M2 150 1207.34 1,81,101

Acoustical TAP False Ceiling

Providing and fixing of false ceiling using 9mm thk TIMES ACOUSTIC PANEL (TAP) or equivalent with Class A fire rating as per ASTM E 84. The G.I. frame

of thickness 0.60 consists of steel metal stud frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c in vertical

direction .These studs are placed at floor and ceiling channels of 76 mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and

ceiling channels are fixed to floor and soffit using fastners at every 600mm c/c. A horizontal frame section is placed at every 1200mm c/c .The polyester

fibre wool (make : Hiloft Polywool or equivalent) of thickness 50mm and density 20Kg/m3 is fixed in between the studs . On outer side one layer of

8mm perforated fire retardant plywood or mdf board is fixed.These boards are joined using “type S” Self tapping SS W 25 / 3.5 x 25mm corrosion

resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. These

boards are perforated on site ensuring min. 75% area is perforated. FInally 9mm thk Times Acoustic panels are pasted on top (using any acrylic adhesive

such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. Times acoustic panel-

a) Surface finish: Matt

b) Density: 200 Kg/m3

d) Fire Rating: class A - ASTM E-84-08

e) Thermal Conductivity: 0.034 w/m.k

f) Completely non-toxic and itch free

g) IGBC Certified Hiloft Polywool

(r) :Thickness: 50 mm Density: 20 kg/m3 Thermal Conductivity: 0.034w/m.k

Acoustical Design Wall Panelling

Digitally signed by

DSR Non- DSR

MR Providing and fixing of 68mm wall panel using 9mm thk TIMES ACOUSTIC PANEL (TAP) or equivalent with Class A fire rating as per ASTM E 84. The G.I.

frame of thickness 0.60 consists of steel metal stud frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c in

vertical direction .These studs are placed at floor and ceiling channels of 76 mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor

and ceiling channels are fixed to floor and soffit using fastners at every 600mm c/c. A horizontal frame section is placed at every 1200mm c/c .The

polyester fibre wool (make : Hiloft Polywool or equivalent) of thickness 50mm and density 20Kg/m3 is fixed in between the studs . On outer side one

layer of 8mm perforated fire retardant plywood or mdf board is fixed.These boards are joined using “type S” Self tapping SS W 25 / 3.5 x 25mm

corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done

mechanically. These boards are perforated on site ensuring min. 75% area is perforated. FInally 9mm thk Times Acoustic panels are pasted on top (using

any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. Times

a) Surface finish: Matt

b) Density: 200 Kg/m3

d) Fire Rating: class A - ASTM E-84-08

e) Thermal Conductivity: 0.034 w/m.k

Thermal Conductivity: 0.034w/m.k

Acoustical Plain Wall Panelling

MR 50mm thick Metal Stud wall panelling which includes 48mm studs (0.55 thick having one flange of 34mm and another flange of 36mm made of G.I

steel) placed at 300mm centre to centre. in 50mm floor and ceiling channels (0.55mm thick having equal flanges of 32mm made of G.I.steel).Providing

& fixing 50mm thick 500 gsm poly wool in roll form will be laid within the Grid structure & wall clading and 12.5mm thick following Gypboard will then

be screw fixed to the channels with 25mm drywall screws at 230mm centres. Screw fixing will be done mechanically either with screwdriver or drilling 2

machine with suitable attachment.Finally the 12.5mm thick Gyp boards are to be jointed and finished so as to have a flush look which includes filling M

and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and complete with aesthetically matched painting

(two coats of acrylic emulsion paint over a coat of primer)[Paint & Primer paid separately]. Entire work to be done as per drawing, specification and

direction of E.I.C

MR Supplying and providing wooden dado work within the Auditorium from proscenium level to rear wall with a height of 1200mm approximately from the

floor level by a frame work made of 50mm thick Metal Stud section placed at 600mm centre horizontally. The frame work to be covered by 9mm thick

ply (BWR grade) with nails & adhesive and 4mm thick natural teak veneered ply to be pasted on 9mm ply with adhesive in a decorative pattern.The top

edge of the dado level and the bottom edge of the wall paneling level to be covered with polished moulded teak wood bit of size 50mm x 12mm width M2 65 7677.08 4,99,010

and the bottom level of the dado to be covered with 100mm x 12mm wide wooden skirting to be fixed on top of dado with nails & adhesive. The total

dado work to be completed with Melamine polish of approved colour. Entire work to be done as per drawing, specification and direction of

E.I.C.[wooden skirting paid separately]

Wooden Skirting

MR Providing and fixing 100mm W x 12mm thick Teak wood skirting to be fixed on top of the bottom level of the dado work with nails & adhesive. Entire

work to be done as per drawing, specification and direction of E.I.C.

MR Providing and fixing 50mm W x 12mm thick moulded teak wood bit to be fixed on top of the bottom level of the paneling with nails & adhesive. Entire

work to be done as per drawing, specification and direction of E.I.C.

Sound reducing door

Sound reducing door frame made of 125mmx63mm SAL wood / Hard wood sections. Internal grid of the door leaf will be made of SAL wood section of

100mm x 50mm x 600mm c/c. the front side of the grid will be covered with12mm & internal side of the grid will be covered with 6mm BWP ply with

50mm thick 500 GSM poly wool will be pasted inside the wooden grid.The external and internal side of the door will be finished with natural teak

veneered ply of 4mm thick on 12mm & 6mm BWP ply, the entire door will be finished with melamine polish and necessary hardware fittings like heavy

duty door closer, ss handel of size 450 mm long & bearing fitted ss hings,tower bolt etc.

Digitally signed by

KUMARI 11:49:36 IST

DSR Non- DSR

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and

manufacture, including applying additional coats wherever required, to achieve even shade and colour.

STAGE CRAFT WORK

Fixed Light Gallery

Supply fixing of fixed light gallery mechanism consisting of 48 mm dia pipe bearing fitted hinge fixed on both side of the wall completed with paint

Providing & fixing front Decorative Valance. Fixed ahead of front curtain, made of plain acrylic velvet fabric of approved make & color, bottom of frill

having golden nylon lace (Scallop width 700mm each). At top edge 38 mm Navar tape and. cotton ropes every 0.3 mtrs. Draped to 33% to from plates 44573.32 44,573

MR (velour) etc. Entire work to be done as per specification and direction of E.I.C. Set 1

Fixed Light Bar

Supplying,fitting & fixing of fixed type Light Bar mechanism made of 48mm OD MS tube and properly fixed from grid structures with help of 8 mm dia.

MR Steel wire rope complete in all respect for light bar as per direction of E.I.C. Nos 3

Supply, fitting and fixing approved quality black color double gathered black cotton cloth curtain including arrangement of frill bar made of 33mm OD

MS tube synthetic enamel paint finish hanging by steel wire rope from MS gride structure or RCC roof and completed as per direction of E.I.C (Size of 49324.00 2,46,620

Back Curtain Mechanism

Providing and fixing approved quality cotton black color Horizental side open two part double gathered manually operated back curtain with (Horizental

type) mechanism consisting of 75mm and 120mm bearing fitted pulley, steel rope, steel ring, aluminum channel etc Entire work to be done as per 146414.40 1,46,414

Main Curtain Mechanism:

Supply, fitting and fixing of one no. Vertical movement electrical operate motorized curtain control equipment as main curtain comprising of a) winding

drum. b) one no. 1 H.P. single phase 220 V. 1440 RPM Crompton greaves electric induction motor. c) one no. heavy duty 50:1 ratio reduction gear box .

d) one no. automatic control reversible motor starter. e) bearing block. f) one lot bearing block with stand. Or “I” and “L” type pully. g) one lot curtain 168740.00 1,68,740

running shaft. Or M.S Master roller h) required size 2 mm heavy duty wire rope. i) one lot foundation bolt. k) one lot curtain Wight, l) guide rope with

Curtain cloth for Main Curtain

Providing fitting and fixing main curtain (vertical) wave design double gather silk satin cloth of approved make and shade complete with tap newer,

Supply,fixing & fixing of wings mechanism made of 33.7mm OD MS tube with pivotal & trench mechanism for rotational,forward & backward

MR movement.The entire m.s wings structure to be covered with black cotton cloth. Nos 6

Cyclorama Frame

Providing, fabricating and fixing fixed type PVC Perforated cyclorama screen with black color side border with eyelet of width 0.3M This will be fitted

on fixed type cyclorama frame to be made of 48mm & 33mm black medium pipe, M. S. angle, 6mm thick M. S. plate etc. Completed with one coat

synthetic enamel paint over two coats of red-oxide primer.Entire work to be done as per specification and direction of E.I.C.

Stage Grid with Gangway and sub Grid:

Digitally signed by

DSR Non- DSR

Providing and fixing Structural steel work on stage at a height of approximately 78.5 mtr from the stage floor level respectively to be made of

48mm/33mm M.S tube, M.S flat and 75mmx75mmx6mm M.S angle etc to be supported additionally from existing truss /RCC ceiling structure by

50mmx50mmx5mm thk MS angle suspenders with expansion fastner fixed to wall / beam support with 150x150x10mm thick expansion fastner

etc.Completed with one coat of primer and two coats of black synthetic enamel paint. Entire work to be done as per specification and direction of E.I.C.

Providing, fitting & fixing side and top proscenium by m.s frame work made of ms tube of section of 50mm X 25mm with a grid structure of 600mm X

600mm c/c. The front fascia of the proscenium to be covered with 9mm BWR ply . Finally the front facia of the proscenium to be covered with 4mm

thick natural teak veneered ply completed with melamine polish of approved colour. Entire work to be done as per specification and direction of E.I.C.

Main Curtain Box and Tormentor:

Providing, fitting & fixing main curtain box & front masking to be made of 50mm X 25mm thick m.s tube structure of 450mm X 600mm c/c. Front side of

the structure to be covered by 9mm commercial ply BWR with 1mm thick lamination and other part will be upholstered with 12mm foam and black

cotton cloth. All exposed edges to be covered by 50mm wooden polished leaping complete with a provision for angular movement of front masking part 4867.50 87,615

of 1800 with necessary fixing arrangement. The entire work to be done as per specification and direction of E.I.C.

Wooden Stage floor:

Arrangement of Stage floor by providing, fitting and fixing of runners of size 100mm x 63mm with 600mm centre of approved quality anti-termite

painted M. Sal / Hard wood will be fixed on existing MS structure with M. S. clamps and nuts bolts. Leveling is to be done with wooden blocks to

provide passage for cabling for sound & stage light system, 19mm thick BWP ply ( Century/Green) to be fixed on the above over the grid with screws 9963.92 6,47,655

and nails. 8mm thk wooden planks ( Mikasa/Greenlam) will be fixed on the soild ply with necessary fixing arrangement .

Stage False Ceiling

Digitally signed by

KUMARI 11:49:36 IST

DSR Non- DSR

Ecophon ADVANTAGE or equivallent with micro look edge and 15mm thickness ,easily demountable tile , manufactured from High density glass wool

with the visible surface is a batch painted glass tissue in black and the back of the tile should be covered with glass tissue. Tiles should be classified

under absorption class A with "alpha w " value of 0.9 at 110 & 200 o.d.s. Sound absorption test results should be measures according to EN ISO 354 and

classification according to EN ISO 11654 and the single value rating for NRC and SAA according to ASTM C 423. Tiles should be easily demountable with

the option of weekly dusting and vacuum cleaning . Tiles should have black color " black 500 " nearest NCS color sample S 0500 - N with 83% light

reflectance. The tiles should withstand a permanent ambient RH up to 95% at 30 degree C without sagging , warping and delaminating ( ISO 4611).

Should be certified by the Indoor Climate labeling , emission class M1 for building materials and recommended by Swedish Asthma and Allergy

Association. Should have been granted the Nordic Swan eco - label with fully recyclability. The glass wool core of the tiles is tested and classified as non-

combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501-1 standard of Europe. Tiles should have a

re-cycled content of more than 70%.

Providing and fixing 15mm Gyproc Bolt Slot polyester pre coated GI T Grid system in 600x600mm module which includes providing and fixing wall angle

of Size 19x22mm along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers. Then suspending the 3600mm long

main tee 41mm deep including 14.3mm wide box shaped table with 7mm recess and of 8mm depth from the soffit using GI slotted cleats of size 27 x 37 3050.30 2,13,521

x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30

x 0.8 mm at 1200mm c/c,and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than

600mm from the adjacent wall. 1200mm long Cross Tee 41mm deep including 14.3mm wide box shaped table with 7mm recess and of 8mm depth is

then interlocked into the pre-cut slots in the main Tees at 600mm centers in direction perpendicular to the main Tee to make a grid of 600x 1200mm.

Finally 600mm long secondary Cross tees 41mm deep including 14.3mm wide box shaped table with 7mm recess and of 8mm depth are then

interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm. Cross Tees

having length more than 600mm are to be supported independently. Bolt Slot grid Main Tees & Cross Tees to have mitred ends & “birds mouth”

notches to provide mitred cruciform junctions and white flanges incorporating a 7mm central slot in black colour.

Main Runner ‘T’ section of size 15x40mm hot dipped galvanized steel body and capped with precoated of dipped galvanized steel and 3.6mtr. Long.

Cross Runner ‘T’ section of size 15x40mm hot dipped galvanized steel body and capped with precoated of dipped galvanized steel and 1.2/0.6mtr. Long.

Perimeter wall angle of hot dipped galvanized steel angle body of size 19x22mm and 3.05mtr. long. (Extra support to be provided with 50 mm thick G I

Supply, Installation, Testing & Commissioning of Free Standing/Floor Mounted Digital Podium built of 1.6mm CRCA Steel sheet, screw less chasis,

polymer powder coated, Wooden Top, All directional wheels with lock, Display feature- Highly Sensitive, Built- in interactive Capacitive touch Monitor

with Tilt facility, Screen size-19"(interactive type), Color LED, scratch resistant, antiglare & overlay tampered vandal resistant glass(3mm) , Space & 405625.00 4,05,625

technical provision for additional devices like laptop, Visualizer, keyboard, mouse etc.Approved Make-Make-EVOTA/UNIVESO/ ATDSC

Supplying and providing Stage fascia up to the height of wooden stage floor level from the floor level of the auditorium by a framework made of 50mm

x 25mm m.s tube. The frame work to be covered by 9mm thick ply (BWP grade) (Century / Green / Austin make) with nails & adhesive and 4mm thick

natural teak venerred ply (Century / Green make) to be pasted on 9mm ply (Century / Green / Austin make) with adhesive in a decorative way. The

bottom edge of the fascia to be covered with polished teak wood skirting of size 100mm x 12mm and top edge of the facia will be covered with 75mm x

50mm angular moulded wooden bit complete with melamine polish of approved colour. Entire work to be done as per specification and direction of

(CivilB Auditorium Electrical Work

MCB Distribution Board :

Supply and installation of folloing double door MCB distribution board on wall by chase cutting and flushed with finished level or on angle iron frame

including grouting, cementing, mending good to original finish, painting etc. complete with internal eletrical connection by suitable copper conductor,

proper termination & socketing as per the requirement and as per the direction of Consultant or Employer or as shown in the SLD.

1 No. 40A 4P MCB ( 10 KA )

Digitally signed by

DSR Non- DSR

12 Nos. 16A SP MCB ( 10 KA ) for 6-16A socket outlet.

1 No. 63A 4P RCCB

24 Nos. 6-16A SP MCB ( 10 KA ) depending on load for light, fan, 6A socket.

1 no. 63A. 4P MCCB (16 KA min.) with O/L, S/C Protection.

MR Outgoing :

3 Nos. 32A TP MCB ( 10 KA ) depending on load for light, 6A socket.

3 Nos. 10-20A SP MCB

1 no. 160A. 4P MCCB (16 KA min.) with O/L, S/C Protection.

MR Outgoing :

4 Nos. 63A TP MCB ( 10 KA ) depending on load for light, 6A socket.

2 Nos. 32A TP MCB

Circuit wiring :

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

( length of the wire are approximate )

Power plug socket :

MR Power point wiring for 6/16A socket outlet including supply & fixing of modular type M.S. for concealed or PVC for surface switch box, front plate,

6/16A 6 pin socket outlet with controlling switch complete with connection to prelaid 2x2.5 + 1x1.5 sq.mm. circuit wiring, (maximum 2 socket looping Nos. 30 1090.32 32,710

by one circuit) painting, mending good damages to the original finish etc. as required.

1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel

conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as

1.4 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Secondary point wiring :

Digitally signed by

DSR Non- DSR

MR Secondary light, fan etc. point wiring with 1100V grade 2 Nos. single core 1.5 sq.mm. {1 for phase & 1 for neutral ( black insulation colour ) by looping

method} and 1 No. single core 1.0 sq.mm. for earthing ( green insulation colour ) Stranded copper conductor PVC insulated unsheathed FRLS flexible

cables in suitable size as per IS heavy duty rigid PVC conduit (ISI marked embossed on conduit surface) with all accessories as required.

Supply of Fitting & Fixtures :

MR LED Rope light including driver of of approved make with all required accessaries. (As per specification.) R.Mt 150 1527.68 2,29,152

Installation of Fitting & Fixtures :

Fixing of following type light fittings and lamps with supply of interconnection with 3 nos. 1.0. Sq.mm. Stranded single core PVC insulated flexible copper

wire on wall or suspended from ceiling by GI wire, painted solid hard wood base blocks, screws, connecting wires etc. as required (Light fittings & lamps

will be paid seperately).

MR LED Rope light including driver of of approved make with all required accessaries. (As per specification.) R.Mt 150 158.04 23,705

STAGE LIGHT SYSTEM

200 W CE Certified LED PLANOCONVEX LIGHT 200W cool white LED, Life: More than 30000 hrs, Field Angle: Spot Light (1/10 peak), 29-degrees;

Soft Light (1/10 peak), Color Temperature: 5000K, Color Rendering Index: Ra=84, Dimmer: 0-100% linearly adjustable, Channel: 1 channel for

dimmer, Housing: High- intensity die-casting, aluminum, IP20 complete with suitable clamp.Make: Satelier / PR Lighting / Sholite / DTS Lighting

1000W, 240 Volt, PAR Sealed Beam Light CE Certified with CRC Sheet Metal and alluminium die casting, mat black color, yoke & clamp.Make:

MR Satelier / PR Lighting / Sholite / DTS Lighting

200 W CE Certified LED FRESNEL LIGHT 200W cool white LED, Life: More than 30000 hrs, Field Angle: Spot Light (1/10 peak), 29-degrees; Soft Light

(1/10 peak) ? 97- degrees, Manual zoom, Color Temperature: 5000K, Color Rendering Index: Ra=84, Dimmer: 0-100% linearly adjustable,

Channel: 1 channel for dimmer, Housing: High- intensity die-casting, aluminum, IP20 complete with suitable clamp.Make: Satelier / PR Lighting /

MR Sholite / DTS Lighting

LED Profile Light CE Certified (3000°K), having Lumensity of 12,000 lux at 2mtr with zoom angle of 20° / 36° with electronic full range AC 90-260 V, 50

MR Hz power supply & maximum 80W complete with suitable clamp.Make: Satelier / PR Lighting / Sholite / DTS Lighting

S.I.T.C of Moving Head with Lamp (49.00 Lumens) base type GX9.5, Optical group 10.100 Lux at 5 m (11”). Optical group made with 3 coated lenses

combined with a dichroic glass reflector. * 16-bit motorized focus, 6-bit motorized Iris, 3 selectable zoom angles (11* / 15* / 18*), liner

dimmer/shutter/strobe (0.85 flash/sec to 10 flash/sec). Color generation : 2 overlapping 8-collur wheel with liner selection for perfect 2-colou8r beams.

Dynamic effect 2 overlapping gobo wheels for multiple effect, customizable rotating gobo wheel (7 gobos), fixed gobo wheel (11 gobos), 3-facet

rotating prism, frost filter, interface / Control / Programming: LED display, 4 soft-keys (control/management / monitoring of the main parameters). (

Make Modern stage light/ equivalent)Controlled via DMX 512 standard digital communication protocol, Wireless ready, internal operating system

updatable via D.T.S. RED BOX interface and HyperTerminal program on windows based PC DMX:26 DMX channels, Pan &Titt: FAR (Free Axis Rotation)

optional, 16-bit movement resolution Pan 540o (3.9 sec): Tilt 270o (2.6 sec), 4 Selectable speed ranges. Pan/Tit locking system with recessed buttons,

Automatic Pan/Till repositioning in case of knock, Power supply, Electronic ballast : 90-260 V 50/60 Hz, Electro-magnetic ballast: 230 V 50/60 Hz. Power

consumption : 750 W. Connectors: DMX 4 XLR connector (3-pole in and Out 5-pole in and Out) by Neutrik; Power Supply: POWERCONN connector by

Neutrik, Operating ambient temperature:- 10o/40o.

Digitally signed by

KUMARI 11:49:36 IST

DSR Non- DSR

24CH × 2KW Electronic Dimmer CE Certified with Dual DMX signals input and can work simultaneously, Fade accuracy: 4096 (16 bit)

,Integrative design, light weight, easy for maintenance, Independent dimming, Soft and hard patch for optional, English menu, LCD display, user-

friendly interface, Response time: quick, normal or slow, helping prolong lamp's life, 50 backup cues, run both manually and automatically,

Status selectable when no DMX signal, 3 working modes for each channel: normal, fix and switch, 5 User-selectable curves: linear, square, s-curve,

extraction or user-defined, Very low interference, Over load and Neutral-lost warning system force to limit output, Each dimmer output can be set as Nos 1 148448.21 1,48,448

range of 110 to 250VAC Technical parameter, Voltage: 160Vac~240 Vac, Frequency: 45Hz~65Hz, Fade accuracy: 4096 (16 bit), Auto voltage

compensation: effective with a 10% voltage variation input, output variation≦1%, Power Consumption: 60W, Output: 4KW for 12 channel,

Signal: DMX- 512.Make: Satelier / PR Lighting / Sholite / DTS Lighting

SITC of Lighting Console with 1024 DMX channels

• 1024 Channels. • 96 Fixtures.

• 96 Dimmer Control Channels.

• Time control of scenes: Fade in/out, LTP slope

• Channels for each fixture 40 primary + 40 fine tune • LCD display with back light

• 600 Scene step • 60 Scenes/Playbacks

• 10 Scenes to run simultaneoulsy

• Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus

• Master slider - Global, playback, fixture

• USB Memory - FAT32 supported

Make: Satelier / PR Lighting / Sholite / DTS Lighting

DMX Splitter with one DMX input and 6 buffered outputs and 3 pin / 5 pin XLR connectors.Make: Satelier / PR Lighting / Sholite / DTS Lighting Nos 1 57946.43 57,946

S.I.T.C of Led Par Light with VOLTAGES: 200V / 220 V / 230V / 240V AC, 50/60 Hz. Optional : 100V / 120V AC, 50/60Hz POWER CONSUMPTION : 120w

@ 220v, led power consumption 3 W, Quantity 36(9R+9G+9B+9W), Manufacturers Rated LED Life 50000 Hourse. COLOURS: RGBW liner color mixing

with Macro, COLOR TEMPERATURE : Linear color temperature correction from 3200K to 10000K, DIMMER: 0=100% Linearly adjustable, STROBE:

Electronic Strobe, CONTROL: DMX512, 3 pin interfaces, 7 channels in short mode, 11 channels in standard mode, and 15 channels in extended mode,

Master/ Slaves Synchronous control made, 16 present memories, 16 user memories, preset memories and user memories can be called by control

channels, 16 level speeds adjustable, Self test Mode, OTHER FUNCTIONS: LED board temperature display, Fixture usage time display parameters about

DMX mode, Display setting status, operation mode can be transmitted by synchronous control.

S.I.T.C of Fog Machine 1500 Watt, Voltage : AC 220-230V, 50-60Hz, Technique Index: Equipped with remote control kits, Remote Control Function :

Control is possible from a distance (60 m away) with a small emitter, Smoke output: 3000cu.ft/min. Never Jammed : Its heating system applies the 9345.60 18,691

MR mirror patient technology mirror piping. Capacityof oil tank: 2.0 L. Nos 2

Wiring of circuit for each fitting by 2 core 1.5 sq.mm PVC insulated copper (flexible) conductor and FR PVS sheeted cables 1.12 KV grade from fitting to

DMX Wiring Points including looping point with DMX wire from Splitter to fixtures / fixture to fixtures complete with 3 / 5 pin XLR

MR connector with box (wherever required).

MR Supplying and fitting of 16A power plug socket with one no switch control at stage floor Nos 10 713.90 7,139

MR S.I.T.C of 16 A, plug top including connection. Entire work to be done as per specification Nos 60 130.98 7,859

MR S.I.T.C of patch panel consisting of 48 nos. 16A combined plug socket unit along with control withMCB No 1 94821.43 94,821

DISMANTLING AND SCAFFOLDING

Digitally signed by

DSR Non- DSR

MR Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and

stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, M2

horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working

platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be

stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for 240 300.27 72,064

the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose

.The payment will be made once irrespective of duration of scaffolding. sqm 285.00 Note: - This item to be used for maintenance work judicially, necessary deduction

for scaffolding in the existing item to be done.

Product name & specification

SITC of Passive 2 x 8 inch LF speaker plus 1 x 1" HF, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect.

MR SITC of Pasive 2 x 18 inch sub-woofer, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect. Nos 2 417951.79 8,35,904

SITC of Passive 2 x 6 inch mid / high speaker, 2 x 6” Full Range Cabinet,Reflex Tuning, as per speciafication and approved by EIC/RSP-SAIL, complete in

SITC of 15" High Power Powered Stage Monitor with Critical Performance Indicators, as per speciafication and approved by EIC/RSP-SAIL, complete in

SITC of Array frames for line array, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect.

SITC of 2 Channel analog Amplifier, 1500 Watts @ 4 ohms Audio Power Amplifier, Toroidal or better

SITC of 2 Channel analog Amplifier, 2000 Watts @ 4 ohms, Audio Power Amplifier, Toroidal or better

SITC of 2 Channel analog Amplifier, 700 Watts @ 4 ohms, Audio Power Amplifier, Toroidal or better

SITC of 24 Channel Analogue Mixer, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect.

SITC of Dual Channel 31-Band Equalizer, 1/3-octave Constant Q frequency bands, Switchable boost/cut ranges of ±6 or ±12 dB, Front panel bypass

switch, ±12 dB input gain range, XLR and TRS Inpts and Outputs, Frequency Response of <10Hz to >50kHz, Dynamic range of greater than 108dB Nos 1 342832.14 3,42,832

SITC of Floor Standing Podium Microphone, No of Capsules - 2, Type: Condenser, Pattern: Super Cardioid, Sensitivity - 16mV PA, Max SPL 133 dB

SITC of Wireless hand held receiver, Diversity Principle: True Diversity, No. of Channels : 2, Frequency response 20-20 Khz, Frequency Selection: Auto,

Modulation : Wideband FM, Attenuation : 0 to 14 Db selectable , LED Display, Range : 100 meters, With RF Shielding 2 68903.57 1,37,807

SITC of 33 Meter Snake Cable minimum 20 Channel with Drum of Interface Box & Necessary Connectors

SITC of 6 mm 2 core shielded wire, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect.

SITC of 4 square mm, 2 core, speaker cable or better, as per speciafication and approved by EIC/RSP-SAIL, complete in all respect.

SITC of Connnectors, XLR Male Female, 1/4 inch Phono Jack

Digitally signed by

DSR Non- DSR

Supplying & Fixing of Floor Standing Rack network Rack - 24U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with

FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs.

With a Overall Weight Carrying Capicity of 1000Kgs. Side Panels - 42U/800d Front Glass Door, 24U/600w Rear MS Door (Fully Perforated - Mesh) Nos 1 27919.64 27,920

24U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets

MR 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 24U,

SITC of 2 inputs x 6 outputs, speaker management system, with AES inputs, USB inputs, or better, as per speciafication and approved by EIC/RSP-SAIL,

"G" Air conditioning System.

Supply of Air cooled inverter Ductable type A.C units confirming to the Specification Indoor Units or the evaporator Unit shall be of ceiling suspended

type housing the cooling coil blower and the filters mentioned in the specification. Outdoor units or the condensing units shall be fully enclosed with the

corrosion resistant heavy gauge M.S. casing and easily removable access panel. The outdoor units shall be housing the scroll compressor, condenser coil

and the low split propeller fan and motor as mentioned in the specification. Unit shall have refrigerant circuit clubbed with all electrical drive & other

standard accessories.

MR Installation , testing, balancing & commissioning of Air Cooled Ducted Unit, with necessary Accessories, N2 leak testing vacumising of the system,

refrigerant copper piping duly insulted wherever needed with adequate thickness of insulated material for interconnecting indoor & out door unit, inner

connecting control cabling between indoor unit to outdoor unit, hard conduit PVC type of following sizes, Condensate drain pipe for ducted split unit. 857536.68 8,57,537

Drain piping shall be insulated with 9mm thick nitrile tubular insulation with adhesive from TFAU to nearest drain point, site fabricated ducting & AI

Digitally signed by