1. CONSTRUCTION OF WATER KIOSK NEAR BUS STAND IN ZALOD. 2. Construction of Shamshan in Zalod Main Shamshan area at Zalod. (Fift Attempt)

NAME OF WORK :-

1 CONSTRUCTION OF WATER KIOSK NEAR BUS STAND IN ZALOD.

2 Construction of Shamshan in Zalod Main Shamshan area at Zalod.

1 NAME OF WORK :- CONSTRUCTION OF WATER KIOSK NEAR BUS STAND IN ZALOD.

No. Description Quantity RATE Per Amount

1 Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift 260.35 18.94 Sq.Mtr.

2 Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Mortar. 13.66 536.09 Cmt.

3 Brickwork using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. in super

structure above plinth level upto floor two level in Cement

Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional

4 Demolition including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift. (i)

R.C.C. work 6.93 1030.20 Cmt.

5 Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Slab 7.25 7053.84 Cmt.

6 Providing TMT Bar FE500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level 507.55 76.21 Kg.

7 Dismentalling tiled of stone floors laid in mortar including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. 28.32 46.77 Kg.

8 Providing, laying and fixing 60 cm X 60 cm vitrified 8 mm thick

tile flooring over 20 mm (average) base of cement mortar 1:4

(1 cement : 4 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling

of existing flooring if required and Grouting the joints of

flooring tile having joint of 5 mm width using required

quantity of epoxy grout mix of organic coated filler of desired

shade including filling / grouting and finishing complete as per

direction of Engineer-in-charge.

9 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

flooring & platform required size, approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

10 Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and

other attachment etc. complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in area.

11 Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

12 Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

13 Providing 15mm thick cement plaster in single coat on Rough

(Similar) side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

14 Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. 160.70 40.59 Smt.

15 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surfce free from mortar droppings and other foreign

matter and sand papered smooth.Plastic emultion paint.

Extra over item for every subsequent coat of wall painting

with plastic emulsion pain of approved brand. 160.70 40.52 Smt.

16 Finishing walls with textured exterior paint of required shade

New work (Two or more coats applied @ 6.56 ltr/10 sqm)

over and including priming coat of exterior primer applied @

17 Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

connection etc. complete on terrace 10000.00 3.95 litre

18 Providing & Erecting full SS Body (SS 304) Split type water

cooler having storage capacity 160 to 175 Ltr.(Tank SS 304) &

Cooling capacity 150 ltr. Per hour @ an ambient temp of

C.The outlet temp. of the water should drop by 150C within a

hour,The water cooler should be comprising of hermetically

sealed Reciprocating compressor with R134A, fan motor,

Copper Condensing unit with company fabricated Outdoor

Unit water tank surrounded by evaporating coil, thermostats,

relay etc.complete with necessary copper tube & Insulation,

M.S Chanel Stand with Painting for water tank & M.S. Powder

Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core

Cord for connection.

19 Supplying & erecting reverse osmosis (RO) water purification

system with M.S. powder coated pedestal frame, prefilter

housing carbon filter suitable buster DC pump, auto low &

high pressure switches with following size of LPH capacity &

erected as directed

[G] 1000 LPH with 3 phase Raw water pump of 1700LPH @

3.0 kg/cm2 (1No - Kirloskar/CRI/Lubi), Dual media filter

13"x54" - 1 No, Micron catridge filter 20" x 4.0" - (1No), High

pressure pump 1000LPH @ 11kg/cm2 - (1No -

Kirloskar/CRI/Lubi), RO Membrane housing with RO

membrane of 40*40 -(4 Nos), RO pressure tube 4" x 2E-

(2Nos), 0 - 2400LPH Rotameter ( 2 Nos). Dosing pump 0 -6

LPH (1 No) with 100 Ltr Dosing tank - (1 No.), Recovery Rate

20 Providing and fixing MS Door and Window with Assembly

including Applying priming coat over new steel, Painting two

coats (excluding priming coat) on new steel and Welding

using of MS Fram size 50X50X5 middle support of MS Flat

25X3 and MS Door sheet of 1.6mm thick for Door & Windows

as per instruction of engineer in charge.

21 Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt

with colour Powder Coated alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete for

Ventilation 9.53 1175.56 Smt.

22 Providing and laying broken chine mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered

to bring mortar creme out up to surface using white cement

including rounding off junctions and extending them upto

15cm along the wall, clearing with water and oxalicacid etc.

as directed. 46.23 747.29 Smt.

23 Supplying & erecting approved make self-priming domestic

monoblock water pump with 1.5 H.P motor, suitable for

operation on 230 volts, 50c/s. AC supply with metallic flange,

and M.S. impeller delivery and following discharge 44 LPM at

32 Mtr head suitable 25 mm dia delivery

24 Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.

25 Providing & fixing PVC SWR nahni trap IS 14735 for drain -

100mm diameter with jali of the following nominal diameter

of self cleaning design with C.I. scread down or hinged grating

including the cost of cutting and making good the walls

26 Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)

27 Providing and laying (to level or slope) and jointing with stiff

mixture of cement mortar in proportion 1:1 salt glazed

stoneware pipes incl. testing of pipes and joints complete. (A)

28 Dismantling santtary fittings like wash basin . W.C. pan Indian

and European type, flushing tank etc. including

stacking the materials with all lead and lift. 7.00 394.51 Each

29 Providing and fixing screw down bib taps of following size.(A)

Brass screw down bib tap polished bright. (i) 15mm dia.

30 PVC SWR pipes IS 13592 for Drain - 110 mm dia. 20.00 265.34 Rmt

31 PVC SWR Piipe clamp 110 mm 10.00 12.84 each

32 Providing and fixing brass screw down stop tap.(A) 15mm dia.

Electrical Work

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 12.00 485.81 PT.

2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 3.00 674.68 PT.

3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 4.00 475.71 PT.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 6.00 745.38 PT.

4 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.

6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB

Switch 6.00 410.06 Ea.

5 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV Cat-lll 7.00 589.84 Ea.

(ii) 11-15 watts, Surge-2 KV Cat-lll 5.00 427.23 Ea.

6 Providing & erecting Approved make Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C.50 Hz

mm sweep complete having 3 blades aluminium body and

blade sets having ornamental design shanks , canopy erected

with earthing. [ Make shall be approved by Engineer in

Charge] 3.00 2358.35 Ea.

7 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(b) 40 Amp. Cat.III 1.00 668.62 Ea.

8 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

outgoing (ii)6 way 2.00 582.77 Ea.

9 Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

(c) For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg. 1.00 8636.51 Ea.

10 Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed. (ii) 40Amps. FP Cat.III

11 Providing and erecting Meter cover made from multi

chamber hollow PVC sections of 20 mm thick having all the

corner joints with PVC solution angles without using any

screws, nails shutters having required size of eye glass and

with necessary locking arrangement hinged with box. The

back of meter box should be fixed with timber. Hold fast for

holding screws or nut bolts. 1.00 3339.06 Sq.Mtr

12 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable.

(a) 3 core 2.5Sq. Mm 20.00 215.13 Rmt.

(d) 3 core 16 Sq. mm 15.14 727.20 Rmt.

13 Providing & erecting open well horizontal mono block pump

set with cast iron body, complete for three phase

submersible motor having

[A] For 1.5 HP 3 phase open well horizontal mono block pump

set suitable for 190 LPM @ 20 mtr head suitable for 40 mm

dia delivery pipe 1.00 10284.83 Ea.

2 NAME OF WORK :- Construction of Shamshan in Zalod Main Shamshan area at Zalod.

No. Description Quantity RATE Per Amount

Excavation for foundation upto 1.5m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50Meter lead. (C) Hard Murrum 37.39 256.12 Cmt.

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth 4.97 3036.87 Cmt.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundation & Footing 9.40 130.39 Cmt.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Ground Beam 3.08 5982.23 Cmt.

Filling available excavated earth (excluding rock) in trenches

plinth, sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each disposited layer by ramming and

watering. 20.48 130.39 Cmt.

Filling in foundation and plinth with murrum or selected soil

6 in layers of 20cm. Thickness including watering, ramming and

consolidating etc. complete. 32.17 259.73 Cmt.

7 Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete 9.07 395.57 Cmt.

Providing and laying controlled cement concrete M250 and

curing complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C work in Column 5.58 8538.54 Cmt.

Brickwork using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. in Foundation

and Plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B)

Conventional 4.62 3624.05 Cmt.

Brickwork using common burnt clay building bricks having

10 crushing strength not less than 35kg./Sq.Cm. in super

structure above plinth level upto floor two level in Cement

Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional 5.16 3892.36 Cmt.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Slab Beam 6.05 5982.23 Cmt.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Slab 20.23 7053.84 Cmt.

Providing TMT Bar FE500D reinforcement for R.C.C. work

13 including bending, binding and placing in position complete

upto floor two level 4503.21 76.21 Kg.

Providing 15mm thick cement plaster in single coat on Rough

14 (Similar) side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement : 3-sand) 135.15 187.71 Smt.

20mm thick sand faced cement plaster on walls upto height

15 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 49.17 329.29 Smt.

Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

flooring & platform required size, approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1

16 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

Finishing walls with textured exterior paint of required shade

New work (Two or more coats applied @ 6.56 ltr/10 sqm)

over and including priming coat of exterior primer applied @

Providing and fixing M.S. grills of required pattern to wooden

18 frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill. 944.96 9047.86 Q.

Electrical Work

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 8.00 485.81 PT.

3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 2.00 475.71 PT.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 1.00 745.38 PT.

4 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.

6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB

Switch 3.00 410.06 Ea.

5 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV Cat-lll 8.00 589.84 Ea.

8 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

outgoing (ii) 6 way 1.00 582.77 Ea.

9 Providing and erecting Pipe type earthing with 40 mm dia

mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed (For panel

10 Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed. (ii) 40Amps. FP Cat.III

11 Providing and erecting Meter cover made from multi

chamber hollow PVC sections of 20 mm thick having all the

corner joints with PVC solution angles without using any

screws, nails shutters having required size of eye glass and

with necessary locking arrangement hinged with box. The

back of meter box should be fixed with timber. Hold fast for

holding screws or nut bolts. 0.50 3339.06 Sq.Mtr

12 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable.

(a) 3 core 2.5Sq. Mm 5.00 215.13 Rmt.

(d) 3 core 16 Sq. mm 5.72 727.20 Rmt.

Add 18.00% GST :-

3.00% Supervision & Contigency :-