SETTING UP OF EXTENSION OF CADET MESS AS A PART OF AUGMENTATION OF INFRASTRUCTURE AND FACILITIES AT INA EZHIMALA PHASEII

Amount

Ist class Hard wood exc 3Sqcm & not exc 6 Sqcm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads all as specified and as directed.

First class Hard wood not exc 3 Sqcm beads, grooves, chamfers, mouldings, square, rectangular or triangular in section, clean sawn, secured with nails or brads beads,staff beads, flutes, reeds chamfers, splays grooves, rebats rounded angles, rounded nosings , tounged and grooved edges etc all as specified and as directed.

First class hardwood boarding 20mm thick Planed both side and edges tongued and grooved or rebated fixed with screws all as specified and as directed.

French polishing on surface of any description width or girth including cleaning and preparing the surface applying a coat of wood filler on new works with two or more coats all as specified and as directed.

Pluggining to walls complete for wood fillets, grounds , moulding, boarding etc at distances n.exc. 1 m in cement concrete and stone walls all as specified and as directed.

MS screw bolts ( Machine make ) with hexagonal or square head at one end screwed the other or screwed both ends ,each screwed end to be fitted with washers or one hexagoinal or square nut n. exc.5cm long and 5 to 10 mm dia of neck all as specified and as directed.

Ist class hardwood wrought scantlings in framed and fixed complete all as specified and directed.

Veeneered decorative plywood grade I (Teak finished on one face) 12mm thick fixed with brass screw and cups in ceiling all as specified and as directed.

75mmX75mmX4.85mm mild steel square hollow sections in main and cross beam, hip and Jack rafters , purlins where connected to common rafters and running rails and guids for sliding doors fixed with angle cleats or other connecting plates conforming to Fe 410W (Gde 250 Quality 'B') all as specified and as directed.

MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

Preparation of new or untreated steel surface of any description over 10cm in width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom complete all as specified and as directed.

Painting to small articles such as metal switch blocks, metal ceiling roses, articles of builder's hardware such as door springs, hooks, knobs, fasteners,stays, locks, latches, etc., straps to roof trusses, gates and similar articles, when unconnected with other painting or when painted in a different tint with two coats over a coat of primer complete all as specified and as directed.

Framed work as in doors or gates of angle or other sections with gusset plates , rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fasteing and fixing complete of Fe-410-W(Gde E-250) quality B.

MS screw bolts ( Machine make ) with hexagonal or square head at one end screwed the other orscrewed both ends ,each screwed end to be fitted with washers or one hexagoinal or square nut but length of bolt exc. 10 cm and n. exc.1 5cm long and 5 to 10 mm dia of neck complete all as specified and as directed.

A2Z ENGINEERS AND PILE FOUNDATIONS

Anil Industrial Corporation

K P DIVAKARAN

K V RAMACHANDRAN

LEKSHMI ENGINEERS