ADDN ALTN TO LAB ROOM DINING HALL IN ACADEMY BUILDING AT BISAG N GANDHINAGAR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each.

Taking down chowkhats or frames with shutters( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each.

Taking up or down steel tubing pipes and connection 15mm dia steel tubing and connection all as specified and as directed.

Taking up or down steel tubing pipes and connection 20 mm dia all as specified and as directed.

Taking up or down steel tubing pipes and connection 25 mm dia all as specified and as directed.

Taking up or down steel tubing pipes and connection 50 mm dia all as specified and as directed.

Demolition Concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips removing broken glass outside MD land etc complete all as specified and as directed.

Taking down aluminium frame partition with glass shutters( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each.

Taking down aluminium frame partition with glass shutters( without taking off shutters from the frame) exc 4.00 sqm each.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris outside MOD Land.

Dismantling of wall and ceiling boards of any description, any thickness including cover fillets all as specified.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified.

M&L ATT along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes minimum 300mm depth @ 300mm c/c etc in apron complete all as specified and as directed.

M&L ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed

Supply only integral water proofing compound.

M&L PCC (1:4:8) type D-2 (40mm graded aggregate) in foundation, wall, filling and mass concrete complete all as specified and as directed

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

S & F Solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and as directed

S&F Aluminium 'T'-Joint matching with any colour width(12 mm/18 mm) complete all as specified and as directed.

S&F Manually operated blackout roller blinds of size as per required width & drop, having hardware top tube made of extruded aluminium with 38mm dia and wall thickness of 1.2mm with spline adoptable to accommodate clutch of UNISILIL/ACMEDA make CLUTCH MECHANISM moulded plastic having self-lubrication with glass fibre reinforcement having a minimum lifting capacity head adoptability 38mm operating chain plastic/steel ball chain adoptable to the clutch pitch for smooth operation of blinds locking member plastic /steel stop locks for limit setting adoptable to be steel chain bonding 30/36mm wide double sided adhesive tape of 3M for strong holding capacity SPRING BOOSTERS provided as per the requirement bottom bar aluminium extruded circular section with powder coated finish , having a min. weight to be 365gms /Rm for a perfect fall to fabric to avoid warpage /floating ends are covered with ends cap to give a perfect finish FABRIC – blackout roller blinds WINFAB MAKE composition PVC/FIBREGLASS weight 470gms/sq mtr etc complete all as specified and as directed. Indoor Air Quality – Green Guard/ ECO-Codices Certified. (Make: Marvel /D’Decor /Hunter Douglas or equivalent.

S&F MS Framed work such as grills or grating ,framed work of window and guard bars etc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165 as in gates complete all as specified and directed.

S&F Solid PVC single moulded door frame of size 50mm x 95mm made but single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling and fixing in opening as per specification & drawing all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter wooden, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Prelam colour PVC Sheet on back face supplying & fixing in frame with particle board Core at site as per specification & drawing complete all as specified and as directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packed with PCC 1:3:6, back side all around frame complete all as specified and as directed.

M & L 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match with vision panels or peepholes, square or rectangular including lipping fixed to chowkhats complete all as specified and as directed.

S & F SS hinges 100mm long all as specified and directed.

S&F 100mm long butt hinges, medium weight, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 150mm long extruded brass handles, fabricated type polished all as specified and as directed.

S&F 200 mm long extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 300 mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

S&F Peg set of six hooks, SS fixed complete all as specified and directed.( Cera CAT No. F5003113 or Equivalent) complete all as specified and directed.

S & F Aluminium powder coated ) min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fabricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) portion glazed with 3mm thick frosted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 5 mm thick frosted glass including aluminium louver patti including SS wire gauge for fixing of 0.36mm dia and 1.40 width aperture with 25x3 mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down of old ventilator complete all as specified and as directed. Make:-Indal/Jindal.

S&F Aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) four track window (three shutters glazed & one shutters wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm with suitable EPDM beading and locking clips arrangement including rubber bead joining cleat for fixing in position, concealed type auto lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 167.50 x 41.00 x 1.60 mm(Section No 21176) (b) Frame (bottom) section shall of size 167.50 x 41.00 x 2.00 mm (Section No 21175) (c) Top & side Members of shutter Section shall be be of size 50.80 x30.00 x 1.60 mm (Section No 20553) (d) Shutter Interlock Section shall be of size 50.60 x 40.00 x 1.60 mm(Section No 20555) (e) Bottom Members of shutter Section shall be of size 60.00 x 29.00 x1.65 mm (Section No 20859) Note:- 1.Section No given above are of make Jindal or equivalent. 2. All miscellaneous accessories and aluminium items shall be included in quoted rate.

M&L Aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 5 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as specified and as directed. Make:-Indal/Jindal.

S&F Aluminium partition min thickness of powder coating 50 micron (of approved colour) made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) ,8 mm thick bakelite sheet all necessary fittings complete as in partition all as specified and as directed. Note:-1. Spacing Horizontal and vertical not exceeding 1200 mm. 2. All misc accessories and aluminium section items include in quoted rate.

S&F 12 mm thick frosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 450 mm long 'H' Types glass door handle standard, locking arrangement including frosted sheet 1mm thick and floor spring all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed.

S & F Decorated PVC Jafri board 18 mm thick fixed over wall, ceiling, wooden or particle or plywood with powder coated aluminium frame of size 100 x 44.5 x 2mm thick all around with necessary cleaning of surface and two coat of glossy finished spray paint complete all as specified and directed. Note:- 1.Jafri pattern/design with CNC cutting is included in quoted rate and approved by user. 2. Paint of PVC Jafri Pattern shall be included in quoted rate and approved by user.

S&F Aluminium alloy powder coated standard hollow section frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (thickness of powder coating 50 micron) complete all as specified and directed.

S&F Ist class Hardwood plain, solid, straight chowkats/and frames, including shutters wrought, framed rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, complete all as specified.

S&F Fully perforated 12mm thick micro regular edged or 10 mm thick square edged G.R.G. (Glass fibre Reinforced Gypsum) False ceiling tiles of size of 595mm x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476(part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. All accessories should be fixed as per manufacturer's instructions. The work shall be carried out as per specifications complete all as specified and directed Make - Gyproc of Saint Gobain /Armstrong or equivalent.

M&L 25mm thick cement concrete type B-1,1:2:4 (20mm graded stone aggregate) as in level course complete all as specified and as directed.

M&L 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB platform in any position including 10mm thick screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L HD Digital matt finished double charged vitrified slab/ tiles 10 mm thick joint free area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over 15mm thick screed bed in CM (1:6), set in neat cement slurry and jointed & pointed in white or coloured cement to match with tiles adhesive as per manufactrurer's instructions complete all as specified and as directed.

S&F HD Digital ceramic double charged vitrified slab/ tiles of size 600mmx300mmx7mm thick (square / rectangular) as in wall set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles adhesive as per manufactrurer's instructions including backing coat 10mm thick in cement plaster 1:4 and tile adhesive etc complete all as specified and as directed.

M&L Digital/ Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not less than size 1200mm x2400 mm, in floors etc over 15mm thick CM (1:6) screed bed. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles adhesive as per manufactrurer's instructions complete all as specified and directed.

M&L Digital / Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not less than size 1200mm x2400 mm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles adhesive as per manufactrurer's instructions including backing coat 10mm thick in cement plaster 1:4 and tile adhesive etc complete all as specified and as directed.

M&L Italian Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB platform in any position including 10 mm thick screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:4 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement mixed with WPC in external surfaces of wall including scaffolding complete all as specified and as directed. (Note :- WPC shall be measured and paid separately).

M & L Preparation of old surface of wall and applying putty 2 mm thick or more as required to level the wall surface complete all as specified as directed.

M&L Washed stone chips/grit plaster/granite finish on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including nailing with 75 mm MS nails @ 450 mm both ways on wall surface with grooves all around as per approved pattern complete all as specified and as directed .

M&L Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper including one coat of 2mm white cement putty by finishing the surfaces even and one coat of chalk whiting primer, complete all as specified and as directed.

M&L Preparation of new surfaces of ceiling and applying three coats of white washing complete all as specified and as directed.

M & L Preparation of old surface of ceiling and applying two coats of oil bound distemper over wall care putty 2 mm thick or more as required to level the wall surface complete all as specified as directed.

M&L Preparation old surface of wall and applying two coat of distemper oil emulsion over using roller brush complete all as specified and directed.

M&L Preparation of new plastered surfaces of wall over applying two or more coats of 100% Premium acrylic emulsion paint (weather) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L Preparation of old surfaces of internal and external wall and applying Texture Painting of approved shade including one coat of 3mm thick wall care Putty, approved base coat and Top coat using roller brush complete all as specified and directed

S&F 18 mm thick PVC Sheet one side prelaminated approved texture (Celuca ply ,Rajashree or equivalent in sintex as approved by GE) as in cabinet with shelves and partitions including Magnetic catches, Mild steel chromium plated handle 125 mm size, Brass cabinet lock, auto close hinges of stainless steel of grade SS-304,required beading and necessary fittings and fixtures as per manufacturers instruction complete as in repairs all as specified and as directed

S&F Solar control film 50 micron reflective type stick to old glass panes,exc.1.5 Sqm as per instructions of manufacturers ,complete all as specified and as directed.

Taking out old serviceable glass bricks of any description at any height, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and directed

S&F 5 mm thick figured glass suitable size of frame ,snap type beads, glazing clips, joint cleats, rubber gasket etc and other accessories all as specified and directed.

S&F Frosted glass film 25 micron to old glass door with stick to glass panes,exc.1.5 Sqm as per instructions of manufacturers ,complete all as specified and as directed.

M&L French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified.

M&L Preparation of old painted surfaces of wall and applying two coats of plastic emulsion paint using roller brush complete as in repairs all as specified and as directed

M&L Preparation of new steel surfaces any description over 10 cm in width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 50 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 15 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 25 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 50 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F Rimless Back to Wall WC with UF soft close slim seat cover, hinges ,fixing accessories and accessories set of size 370mmx580mmx430mm with 'P' trap 180 mm complete as in repairs all as specified and as directed. (Make :-Jaguar Cat part No-OPS-WHT-15955P180UFSM or Equivalent))

S&F Single piece slim Concealed cistern with floor mounting frame, installation kit and ''P- Type " Drain Pipe connection set for wall hung WC including Control Plate Alive flush including accessories complete as in repairs all as specified and as directed. (Make :-Jaguar Cat part No JCS-WHT-2400FP ,JCP-CHR-852415or Equivalent)

S&F Rectangular Shape table top basin with fixing accessories of size 565 x425x140mm including 32mm Click Clack Waste coupling full thread 130 mm height all necessary fitting complete as in repairs all as specified and as directed. (Make :-Jaguar Cat part No KUS-WHT-35935 ,ALD-727L130or Equivalent)

S&F Round shape thin rim table top basin with fixing accessories of size 480mm x480mm x135 mm including Click Clack Waste coupling full thread 130 mm height all necessary fitting complete as in repairs all as specified (Make :-Jaguar Cat part No OPS-WHT-15901N,ALD-727L130 or Equivalent)

S&F Bottle traps 32 mm size with 300mm and 190 mm long wall connected pipes and wall flange for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing ,union, cap and fixed complete as in repairs all as specified and directed ( Make :- Jaguar cat no. ALD-769L300x190 or equivalent)

S&F Urinals with spreader hole and fixing accessories of size 355 x340x535 mm including matching urinal spreader of chromium plated for fixing with 15mm dia pipe and 32mm size Waste coupling full thread all necessary fitting complete as in repairs all as specified and directed (Make :-Jaguar Cat part No URS-WHT-13261H,ALD-705 or Equivalent)

S&F Curved shaped urinal partition with frosted glass 10 mm chrome finish of size 900x450 mm and including fixing with SS brackets complete as in repairs all as specified and directed.(Make: Jaquar Cat No JSE-CHR-110UC450X or equivalent)

S&F Towel ring square with round flange complete as in repairs all as specified and directed Make : (Jaquar CAT No: ACN- 1121N or Equivalent)

S&F Wall mounted Soap dish holder with wall flange complete as in repairs all as specified and directed Make : (Jaquar CAT No. CAN-1131N or Equivalent)

S&F Soap dispenser with metallic bottle complete as in repairs all as specified and directed (Make :-Jaguar CAT No: ACN-1137N or Equivalent)

S&F Bib cock with wall flange complete as in repairs all as specified and directed Make:- Jaquar CAT No: OPP-15037PM or Equivalent) as approved by GE

S&F Pillar Cock with 200mm Extension Body with 600 mm long braided hoses complete all as specified and as directed.(Make :-Jaguar CAT No: OPP-15021PM or Equivalent)

S&F Pillar Cock with 450 mm long braided hoses complete all as specified and directed.(Make :-Jaguar CAT No: KUP-35001PM or Equivalent)

S&F Angular stop cock with wall flange complete all as specified and directed.(Make :-Jaguar CAT No: OPP-15053PM or Equivalent)

S&F Angular stop cock with wall flange complete all as specified and directed. CAT No: OPP-15053PM (Make :-Jaguar or Equivalent)

S&F Hand shower (Health Faucet) brass chromium plated with 8 mm Dia 1.2 meter long flexible tube and wall hook(back flow preventer ) complete all as specified and directed.(Make :-Jaguar CAT No: ALD-577 or Equivalent)

S&F Toilet roll paper holder with stainless steel flap with wall flange complete all as specified and directed, (Make :-Jaguar CAT No: ACN-1153S or Equivalent)

S&F Hand rail wall mounted rail size 600x100 mm complete all as specified and directed. Make : (Cera CAT No. B2210102 or Equivalent)

S&F Wall mounted inverted 'L' shaped grab bar with 500 & 700mm long bars complete all as specified and directed. Make: Cera CAT No. B2210103 or Equivalent)

S&F Stainless steel grating doom 150x150mm complete as in repairs all as specified and directed.(Make: Jaquar or equivalent)

S&F 32mm PVC waste pipe for wash hand basin/urinal/sink 900mm long complete as in repairs all as specified and directed.

S&F Wall mounted automatic hand dryer machine for washroom fixing with nails/screws etc complete all as specified and as directed.( Make:- Dolphy or equivalent)

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete as in repairs all as specified and directed.

S&F PVC (SWR)110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete as in repairs all as specified and directed.

S&F PVC(SWR) 75 mm bore Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete as in repairs all as specified and directed.

S&F PVC (SWR) 110 mm bends any radius etc complete as in repairs all as specified and directed.

S&F PVC (SWR) 75mm bends any radius complete as in repairs all as specified and directed.

S&F 110 mm PVC (SWR) junction double,(double T) with assess door equal or unequal complete as in repairs all as specified and directed.

S&F 75 mm PVC (SWR) junction double,(double T) with assess door equal or unequal complete as in repairs all as specified and directed.

S&F 75mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete as in repairs all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as in repairs all as specified and directed.

S&F 110 mm PVC (SWR) 'P' trap with accessories complete as in repairs all as specified and directed.

S&F 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm iron pipe or brass ferrule and fixed complete as in repairs all as specified and directed

Removing building materials (Brick, Brick dust, stone, sand, aggregate, tiles) etc. to a distance of 1 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

S&F SS Grade 304 letters size 300 x 300 mm including fixing arrangement in wall as per manufacture instruction complete as in repairs all as specified and directed

S&F Rain water single pipe line of 110 mm (4") dia vertical fixed with wall distance 3" with Each plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm aprox. Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration - Zn Al Flake coated refer Technical drawing etc complete all as specified and as directed by Engr- in-Charge (i) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated 2 Nos complete as in repairs all as specified and directed.

S&F Rain water single pipe line of 75 mm (3") dia vertical fixed with wall distance 3" with plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm aprox, Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration Zn Al Flake coated refer Technical drawing etc complete all as specified and as directed by Engr- in-Charge (1) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated -2 Nos complete as in repairs all as specified and directed

Cleaning of PVC tank of capacity of tank exceeding 2000 Litres and not exceeding 5000 Litres complete by flushing out water with cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing complete.

S&F Solid UPVC duct cover of vertical frames on two sides and centre having grooved section 42mm x 35mm thick horizontal members 71mm x 28mm thick with GI 'C' stiffener inside and ends of horizontal members shall be covered with solid UPVC profiles and edge bending tapes. Duct cover shall be fixed with the wall using 100x8mm SS CSK screws etc horizontal and vertical members are joint with required sizes of SS CSK screws complete as in repairs all as specified and directed. (Make : ACCUCEL or equivalent).

Providing & fixing toilet cubicle (of following standard dimension including door of any description or size made of heat, bacteria, water, chemical, scratch, impact and anti-bacterial resistant 12mm thick solid compact laminate panels tested by Govt approved test lab. Finish of the compact laminate should be Suede / *Raw Silk, which includes doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS: 2046 ,as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware matching with HPL boards or as per client requirements like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U-Channels, (6) Shoe Box Plate (7) MS-Base Plate, (8) Top rail with Corner connector (9) Rubber noise deafening tape (10) Screws & wall Plugs. The top fitting should consist of round top rail which will get fixed with pilasters, with SS panel tube holder, SS corner bend (connected with top rail) will be used on the corner of cubicle in absence of brick wall, wall fixing is used only on the wall which will hold the top rail. All screws will of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel bottom cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 75mm.with parts: Make : Greenlam Industries Ltd or equivalent make as approved by GE

(i) Toilet cubicle I-Shape (Front Partition) with standard dimension of size upto ( 2100 mm Height and 1500mm width ), which including door shutter complete accessories all as specified as directed by Engineer in-charge.

(ii) Urinal Partition with standard dimension of size upto (1200 mm Height and 450 mm width) made of above specification complete all as specified as directed by Engineer in-charge.

Providing & fixing Vanity shelf - supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Green guard-Gold standards. This also includes providing and fixing in position with necessary hardware as per manufacturer's specifications & Architects instructions like (1) L bracket (2) Screws & wall Plugs | SS-316). Vanity box should be joined with 12 mm thick compact laminates on front side upto length of WHB area. Standard offered size is 600mm (W) x 500mm [D] X 600mm (H) complete all as specified and as directed by Engineer in-charge. Make : Greenlam Industries Ltd or equivalent make as approved by GE

Providing & fixing Vision Barrier self , supporting 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Stainless steel/Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available colour hardware as per manufacturer's specifications & Architects instructions like [1] Double Coat hook made in SS 316 in SS brushed finish with fine spark texture on nylon parts [2] U & F-profiles in Aluminium alloy grade 6063-To with powder coating in available colors (3) SS grade 316/Nylon divider mounted sleek leg with Ground Clearance [120-150mm) (4) Aligning SS grade 316 common top rail 25.4mm diameter round pipe fixed with wall connector made of 316 grade stainless steel in brushed finish (5) Screws & wall Plugs (SS-3161.Available Design Options 11-Loop In: 12mm thick compact with minimal wall touch divider of size 730mm(D) x 1830[H] with ground clearance of 150mm mounted on sleek leg, fixed with bracket, hence higher hygiene quotient. With In-built hook design feature within dividers for improved utility. 21-Loop Out: 12mm thick compact divider with straight edge of size upto 730mm(D) x 2100(H) with ground clearance of 150mm mounted on sleek leg, fixed with U profiles of size 18mmx16mm. All screws will be of 316 Grade in stainless steel. All pilasters are supported by grade 6 Nylon Polyamide Thermoplastic palm design pedestal footing with non-corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm all as specified and directed . Make : Greenlam Industries Ltd or equivalent make as approved by GE

M&L Point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site including all connected accessories ,box made from not less than 1.6mm GI sheet factory made complete all as specified and directed for the following.

(a) One light/bell/fan point controlled by one switch complete

(b) One 3 pin socket out let 5 Amps on the independent board.

(c) One 3 Pin socket out let 5 Amps on the same board.

Ditto- all as per item No.126 above but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 5/15 Amps. complete all as specified and directed

S&F Modular switch one way 6A,1 Module, as per existing including all electrical connection complete all as specified and directed.

S&F Modular switch one way 16A,1 Module,as per existing including all electrical connection complete all as specified and directed

S&F Modular socket 6/10A-2/3 pin combined 2 Module as per existing including all electrical connection complete all as specified and directed.

S&F Modular socket 16/15A-2/3 pin combined 2 Module as per existing including all electrical connection complete all as specified and directed.

S&F Switch piano type 230 volts , 5 Amps, single pole as per existing including all electrical connection complete all as specified and directed.

S & F Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts as per existing including all electrical connection complete all as specified and directed.

S& F Ceiling rose 3 terminal/ poly carbonate, isolated body as per existing including all electrical connection complete all as specified and directed.

S & F White acrylic plate size 10"x10" as per existing including all electrical connection complete all as specified and directed.

M&L Sub main wiring complete with two run of 6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly complete all as specified and directed . Note :- Two run of 6 Sqmm cable and one run of 6 Sqmm cable as earth wire and PVC conduit and its accessories shall be measured and paid as one length complete all as specified and directed.

M&L Sub main wiring complete with PVC insulated cable two run of 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed Note :- Two runs of 4 sqmm cable and one run of 4 sqmm cable as earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/gray colour complete all as specified and directed

S& F TPN double door vertical distribution board without MCCB 4 way including civil work & all electrica

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 12 ways SPN complete all as specified and directed

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways SPN complete all as specified and directed

S& F MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified and directed

S & F MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed

S &F MCCB 3/4 Pole .415 V. fixed type,125 Amps with breaking capacity 16 KA complete all as specified and directed

S&F LT cable, XLPE insulated screened PVC bradded (ISI Marked), galvanized steel strip or wire , electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 35 sq mm 3.5 core to be fixed on wall complete as in repairs all as specified and directed

M & L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried in ground (earth pit not less than 2.25 meters deep below normal ground level with top edge of the plate not less than 1.5 meters below normal ground level, connecting to galvanized iron earth lead 4mm dia by means of bolt ,nuts, check nuts and washer of galvanized iron or steel besides welding of all joints as shown in drawing and including excavation and earthwork and earth lead protection by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI medium grade 15mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point all as specified or indicated including testing on completion Note: (i) Item includes the cost of 7.5 metre length GI pipe for protection of earth lead and earth lead . (ii) Earth resistance of earth pit should be less than 0.5 Ohms. On testing after completion if the desired earth resistance in not obtained the earthing will be redone at no extra cost

S & F Pluto Panel surface/recess mounted 2'x2' ,36/40 watt cool white or warm white in colour LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination including connection up with twin core twisted flexible copper conductor cable with suitable size all as specified.

S &F Recess mounted circular/round type LED slim fit low profile down lighter of capacity 18/20 watt , complete all as specified and directed

S&F Surface/recess mounted cabinet LED 3W/5W deep spot light complete with all internal wiring all as specified and directed

S&F Decorative type wall mounting/Surface mounted round spot/focus light/mirror light CRCA body powder coated in white of capacity 12/15 watt complete all as specified and directed .

S&F Exhaust fan 200 mm sweep silent type in PVC Body as required at site. complete all as specified and directed

S&F Wall mounted fan 400 mm 5 star 230 volt as required at site complete all as specified and directed

SNEH TRADERS

Ramdev and Sons

ALBA AC AND REF SERVICES