Repairs to Coping, Fencing over Perimeter Wall, Plastering of Wall, Desilting from Nallahs and Strengthening of Embankment/Retaining Wall of Nallah and Repairs to flow area of Gates at O.F. Itarsi.

Amount

Demolition of cement concrete in ground floors, pavings & remove of dismantled material and depositing where directed.

Demolition of Reinforced cement Concrete of Roofs, floors (other than groundfloors), beams, staircases, landing,chajjas ,wall any description (reinforcement cut as required to facilitate demolition) in any position all as directed & remove of dismantled material and depositing where directed.

Demolition of brick work built in cement mortar & remove of dismantled material and depositing where directed.

Removing of dimolish materials lead not exceeding 1km and depositing where directed .all as per specification all as directed by EIC.

Excavating over areas in hard/dense soil not exceeding 1.5 M deep and getting out all as directed by EIC. .

Excavating over areas in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge .

Providing & Construction of Stone masonary Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6 all as per specification and as directed.

Returning, filling in, hard/dense soil including spreading, leveling, watering and well ramming in layers not exceeding 25 CM, All as per directed.

Removing of excavated materials lead exceeding 250 m but n exc. 500 m and depositing where directed .

M & L for hardcore of broken stone or boulder of gauge n.exc. 40 mm, spread and levelled in layers not exceeding 15 CM thick watered and rammed to a true surface All as per directed.

Providing & Laying of cement concrete D2-type, 1:4:8 mix. (40mm graded aggregate) in foundations, filling, Floors etc. all as per specification and as directed

Providing & Laying of cement concrete B2-type, 1:2:4 mix.(40mm graded aggregate) in foundations, filling, Floors etc. excluding the cost of form work but including the cost of finishing & curing etc. all as per specification and as directed

Providing form work to sides & soffits for rough finished flat surfaces of concrete i.e. foundations, footings, plinth beams etc.

Providing form work to sides & soffits for rough finished flat surfaces of concrete faces of walls,retaining walls, abutments,parapets and etc.

Providing & laying of R.C.C. B1-type 1:2:4 Mix using 20mm graded agg. In found., footing & bases for column, plinth beam, etc. all as per specification and as directed

Providing & laying of Reinforced cement concrete (design mix) M20 using 20mm graded aggregates Slabs supported on walls, beams,lintel beam,cooping and columns in floors, roofs, landings,balconies, canopies, deck slabs etc. all as per specification and as directed

Taking down cement plaster on brick / concrete / stone walls, ceiling, sides and soffits of roof projection, chajja, parapet wall etc. including rackingout joints, hacking for key, scrubbing down with water etc.. as directed

Forming V grooves in plaster not exc. 10 mm deep & not exceeding 10 mm on face and flush pointing with CM 1:4 to match with existing surface including curing etc. in brick / concrete / stone walls, ceiling, sides and soffits of roof projection, chajja, parapit wall etc. as directed.

Supply & Providing Dubbing out average15 MM thick cement plaster in 1:6 cement mortar admixed with water proofing compound on fair faces of brick work or concrete external surfaces. including the cost of finishing & curing etc as directed

Supply & Providing Rendering 12 MM thick cement plaster in 1:4 cement mortar on fair faces of brick work or concrete surfaces.

Providing & Construction of Brick work with sub-class `B' bricks straight or curved with modular bricks in cement mortar 1:6 all as per specification and as directed.

Providing & Fixing of mild steel TMT bars 10mm Dia. and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia or securing with clips quality confirming to EIC

Providing & Fixing of mild steel TMT bars 6 MM to 8mm Dia. cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia or securing with clips quality confirming to EIC

Apply chalk whiting on plastered surfaces preparatory to painting on wall, ceiling etc. as per specification & as directed.

Preparing of old decorated plastered surface on wall, cornices ,soffits, chajjas, facias etc. including removal of nails repairs/ re-filling of plug holes, cracks, minor pittings with cement mortar, lime putty plaster of paris, touching with primer, wetting the surface with water and supply & apply a coat of cement based paint including curing with water for two days and than supply & apply final coat cement based paint white or tinted as per specification 5410- 1969 and curing for two days all as directed (Total Two coats).

Supply and Fixing Galvanised 2 strand , steel barbed wire 2.24 mm dia. Barbed with 2 mm dia. Barbs at 75 mm spacings and staining and fixing to any type of standard rails staining bolts, including securing or tying at crossing with and provision of galvanised mild steeel wire, staples or steel pins etc. as directed by EIC.

Dismantling of barbed wire work of any discription not other wise provided all as per specification and as directed by EIC.

Preparation of old decorated steel surfaces free from dust, dirt, loose scales, grease etc. and one coat of Synthetic enamel paint as directed.

Preparation of new decorated steel surfaces free from dust, dirt, loose scales, grease etc. and one coat of red oxide primer and Apply two coat of Synthetic enamel paint as directed.

Supply, Fabrication and erection/fixing of M.S. structural steel Work frame for gates angle or other section with plates, rails, bracws etc. complete fixed with all necessary fittings such as hinges pintles , guide rails etc. fixing complete approved by EIC etc. all as directed by EIC.(Grade Fe 410-W(Gde-E- 250 quality-)

Erection/fixing of M.S. structural steel Work frame for gates angle or other section with plates, rails, bracws etc. complete fixed with all necessary fittings such as hinges pintles , guide rails etc. fixing complete approved by EIC etc. all as directed by EIC.(Grade Fe 410-W(Gde-E- 250 quality-)

Taking down conceretina coil from fencing post and fixing in same position dia of coil 600mm. 10mtr coil spred 6mtr in length all as per specification and as directed.

Supply &laying of RCC PIPES 600MM DIA class NP3 laid and jointed complete with collars all as directed.

M/s JAWAHAR LAL SHARMA (BID ID -908008)

AADHARSHILA CONSTRUCTIONS CO (BID ID -907467)