Suuply and Laying of 3 core, 185 Sqm Armoured XLPE cables HT 11 KV from substation No. 238/01 to 04, substation No. 238/02 to 04 and sub station No. 238/02 to 03 at HEF

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil

Excavation in trenches in Hard/dense soil not exceeding 1.5m deep & getting out

Demolition of Concrete of any description and in any position not otherwise specifically provided for

M & L for cement concrete Type B1, 1:2:4 mix (using 20 mm graded aggregate) in sub base, floor and pavings with 150 mm thickness without using extra cement and with brooming.

Returning, filling of removed soil, levelling, watering and well ramming in layers

M & L for Sand filling under floors or in foundations including watering and consolidation

M & L for Reinforced Concrete Pipe, Class NP3, laid and jointed complete with Collars, Size 100mm Bore

Supply & laying of HDPE Pipe PN-10 for laying of underground Cable including joint and jointing material. Size : 100mm dia.

M & L for XLPE insulated, armoured, 11KV Electric power cable (heavy duty), 3 Core, 185 Sq.mm, Standard Aluminum conductor, PVC sheathed, screened, Flat stripped armoured, Galvanised Steel strip or wired Armoured.

M & L for termination of Cable to both ends by using jointing kit for 11KV (Earth) grade cable for indoor termination, heat Shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured AL Conductor Cable of Size : 185 Sq.mm.

M & L for jointing kit for 11 KV (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm.

Laying of XLPE insulated, armoured,11KV H.T cable, 3 Core, 185 Sq.mm, Standard Aluminum conductor, PVC sheathed, screened, Flat stripped armoured cable in cable trench.

Laying and termination of 3½ core XLPE insulated, armoured, heavy duty electric LT cable with aluminium conductor, 1100 volts grade, cross sectional area 300 sq. mm including one straight through joint.

Supply and laying of RCC Half Round Cable Cover of length 1m, Thkness 25mm

Supply and laying of jointing kit for 1100V (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3½ core XLPE armoured aluminium conductor cable of size 300 sqmm.

Supply and fixing H.T 11 KV mention cable route marker of C.C.1:2:4, 150mm X 150mm X 750mm concrete stone embedded in earth at least 300 mm below G.L and 450 mm above G.L at a distance approx. 100 mtr or as directed by site I/c

Supply and laying warning tape of 8" width of 300 micron LDPE material in cable trench at 300mm to 450mm deep from G.L for protection of U/G cable from any excavation work.

Virtus Techno

ELECTRICALS C E A C