Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹59.2 L
EMD Value
₹60,000
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, R&B Panchayat Division, Nadiad
Construction Of Box Culvert On Vadadala To Sanadara Road (Ch.- 5/300 to 5/400) Under MMGSY (N) 2026-27 Package No 50 Ta. Galteshwar Dist:- Kheda
363806
14/2026-27
Open
Civil Works
Works
Nadiad
6 documents required · 6 mandatory
₹2,400
Executive Engineer, Panchayat (R and B) Division, NADIAD
₹60,000
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
90 days
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
1 Clearing and Grubbing road land including 0.02 28393.00 Hect.
uprooting rank vegetation grass bushes,
shrubs, sapling and trees girth up to 300 mm
removal of stumps of trees cut earlier and
Disposal of Uunserviceable Materials (C) By
Mechanical means in Area of Light Jungle.
2 Earthwork for embankment including breaking 111.00 126.68 Cum
clods, dressing with all lead and lift and
including watering rolling and consolidation of
subgrade in layers at O.M.C. to required dry
density including filling the depression which
occur during the process using power roller 8T
to 10T. (E) From Borrow area within Land
Width (upto 10 ton)
3 Providing, laying, and compacting Quarry 6.00 342.70 Cum
spall for Road side shoulders including
spreading in uniform thickness, including
rolling with vibratory roller 80-100 kN static wt.
to proper grade and camber including
watering etc. complete.
4 Construction of granular sub - base by 39.00 990.31 Cum
providing granular material of Grading-II,
spreading in uniform layers with motor grader
on prepared surface, mixing by mix in place
method with front end loader at OMC, and
compacting with vibratory roller to achieve the
desired density, complete as per clause
5 Providing, laying, spreading and compacting 58.00 1135.34 Cum
stone aggregates of specific sizes to water
bound macadam (Grade-II) (B.T. Metal of size
45 to 63 mm) specification including
spreading in uniform thickness, handpacking,
rolling with 3 wheeled steel / vibratory roller in
stages to proper grade and camber, applying
and brooming requisite type of screening /
binding Materials to fill up the interstices of
coarse aggregate, watering and compacting to
the required density.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
6 Hazard Marker Sign :-Providing and fixing 2.00 3518.69 No.
sing boards made out of 2mm aluminium
sheet; size 90 x 30cms. rectangle as as per
the design/drawing attached (IRC) pretreated
with phospheting process & acid etching;
coated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised
with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand post
and frame fabricated from suitable size iron
angle of 35 x 35 x 3mm & 50 x 50 x 5mm
painted with best quality epoxy coatings The
fixing at site shall be in 1:2:4 CC block of size
45x45x 60cms. for each leg. including
excavation curing etc. complete under the
supervision of engineer in charge. (A)
Engineer Grade (VR)...
7 Citizen' s information Board- Providing and 1.00 12266.65 No.
fixing of typical MMGSY information board as
per instruction. Two MS plates of 1.6 mm
thick, of 900 mm x 750mm size fixed at top &
bottom duly welded with MS angles of 25 x
25 x 5 mm thick M.S plate shall be welded by
two vertical M.S flats & four horizontal M.S
flates 5 mm thick to 75 mm x 75 mm of
SWG square tubes posts duly embedded in
cement concrete M-15 grade blocks of
600mm x 600mm x 75mm, below ground
level. Painting New letters & figure of any
shade with ready mixed synthetic enample
paint of superior quality in required shade and
colour, All sections of framed posts and steel
tube will be painted with primer and two coats
of epoxy paints as per drawing Clause
and Annexure 1700.1 (10.16)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
8 MMGSY "LOGO" Board : Providing and fixing 1.00 4677.92 No.
of MMGSY LOGO informatory sign board with
Logo as per section 1700 of MORD
specifications and drawing. The board will be
a composite unit consisting of Two Plates of
ACM (Aluminum Composite Material),
material specifications as per clause 17001.3.
The top most plate will be of 3mm ACP in
diamond shape of 600x600mm size, riveted
with MS angle iron frame of
25mmx25mmx5mm size on back on edges.
The Lower plate will be of 4mm ACP of
1100x300mm size riveted with MS angle iron
frame of 25mmx25mmx5mm size on back on
edges. Riveting of all the sheets over angle
and flat iron frame will be done neatly to have
plain surface on one side. The angle iron
frame of Both the plates will be welded to a
75mm x75mmx6mm Mild steel post at Centre
and this post will be embeded in cement
concrete M15 grade block of
450x450x600mm below ground level. The
height of the bottom of the lower plate will be
1200mm from normal ground level. The
spacing between the diamond shaped plate
and Lower Plate is kept 150mm. MMGSY
logo, letters and numerals on the ACM should
be made up of Retro Reflective sheeting of
Type-1 AEGP Class-A grade as per the latest
MORD section 1700 and IRC 67-2012
specifications. Al the section of the frame and
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
9 MMGSY Project Information Board: Providing 1.00 8752.96 No.
and fixing of typical PMGSY Project
informatory sign board with Logo as per
of MORD specifications and drawing. The
board will be a composite unit consisting of
Three Plates ACM (Aluminum Composite
Material), material specificaitons as per clause
17001.3. The top most plate will be of 3mm
ACM in diamond shape of 600x600mm size,
riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges.
The middle 4mm ACM plate of will be
1200x150mm size riveted with MS angle iron
frame of 25mmx25mmx5mm size on back on
edges. The main 4mm ACM lower most plate
will be 1500mmx600mm size, riveted with MS
angle iron frame of 25mmx25mmx5mm size.
Riveting of all the sheets over angle and flat
iron frame will be done neatly to have plain
surface on one side. The angle iron frame of
lower most plate and flat iron frame of the
middle plate will be welded to two nos. 75mm
x75mm (12 SWG) sheet tubes posts placed at
1125mm apart centre to centre. the top of the
middle plate will be flushed with the top of
75mm dia medium steel tube posts and these
posts will be embeded in cement concrete
M15 grade block of 450x450x600mm below
ground level. The height of the bottom of the
lower plate will be 1200mm from normal
10 groundmarking
Road level and the hot
with bottom of the
applied middle
thermoplastic 53.00 367.72 Sqmt
paints with reflectorising glass beads on
bitumin surface providing and laying a hot
applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @
250gms per sqm area, thickness of 2.5mm is
excluding of surface applied glass beds as per
IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes.
zebra patta /bump patta lane/center line/ edge
line/cut patta. The white color marking should
provide liminance coefficinet on cemend road
shalll be min 130 mcd/m2/lux and Asphalt
road shall be min 100 mcd/m2/lux during the
service life during the day time. The marking
should meet the performance criteria for night
time reflectivity, wet reflectivity and skid
resistance as mentioned in the section-15 of
IRC 35-2015. Warranty for the Retro
reflectivity should be two years.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
11 Cat Eye / Road Stud / RPM: Supplying of 23.00 326.23 No.
Molded Twin Shanks Raised Pavement
Markers made of polycarbonate and ABS
moulded body and reflective panels with micro
prismatic lens capable of providing total
internal reflection of the light entering the lens
face and shall support a load of 13635 kgs.
tested in accordance to ASTM D 4280 Type H
and complying to Specifications of Category A
of MORTH Circular No RW/NH/33023/10-97
DO III Dt 11.06. 1997. The height, width and
length shall not exceed 20 mm, 130 mm and
130 mm and with minimum reflective area of
13 Sqcm on each side and the slope to the
base shall be 35 +/- 5 degree. The strength of
detachment of the integrated cylindrical
shanks, (of diameter not less than 19 +/-
mm and height not less than 30+/- 2 mm) from
the body is to be a minimum value of 500 Kgf.
Fixing will be by drilling holes on the road for
the shanks to go inside, without nails and
using epoxy resin based adhesive as per
manufacturers recommendation and The color
of the marker should be as per the IRC 35-
2015 and as directed by Engineer-in-charge.
12 Excavation for foundatiuon upto 1.5 m depth 124.00 241.79 Cum
incl. Sorting out & stacking of useful material
& disposing of the excavated stuff upto 50m.
Lead. (B) Dense or hard soil.
13 Excavation for foundation in sand gravel, clay, 332.00 486.77 Cum
soft soil, and murrum etc. incl. sorting,
structuring and dewatering as necessary &
disposing of the excavated stuff as directed.
(Depth up to 3.0 Mt.)
14 Providing and filling in foundation with 52.00 3245.56 Cum
ordinary cement concrete M- 100 mix and
providing necessary vertical pin headers
including formwork, vibrating, ramming and
curing complete.
15 Providing & casting in situ Controlled 75.00 5230.00 Rmt
cement concrete M - 250 for Cement
Concrete Road laid as directed including
tamping, vibrating, finishing, curing, and filling
in joints with bitumen complete.
16 Providing and filling in foundation with 243.00 3818.81 Cum
ordinary cement concrete M- 150 mix and
providing necessary vertical pin headers
including formwork, vibrating, ramming and
curing complete.
17 Providing TMT Bar FE 500/500D 1408.40 76.21 Kg.
reinforcement for R.C.C. work including
bending, binding and placing in position
complete upto floor two level
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
18 Providing and laying Weep hole in abutment 90.00 45.81 No.
and return by using PVC. pipe of 100 mm dia
including laying in proper grade and joining
complete etc as per details specification .
19 Providing and laying - Fitter Media 600 mm 138.00 1180.34 Sqmt
thick directed at the back of abutments,
returns and wing walls as per detailed
specifications.
20 White washing with lime on wall surface (two 184.00 12.09 Sqmt
coats) to give an even shade including
thoroughly booming the surface to remove all
dirt, dust; mortar drops and other foreign
21 Dismentalling the existing structure including 1.00 5050.00 Cum
removing & stacking the dismentalled
materials as and where directed
22 Providing and casting in-situ controlled 249.00 4549.04 Cum
cement concrete M - 250 for RCC raft and cut
off walls including shuttering, laying, vibrating,
ramming, and curing complete.
23 Providing and casting in situ controlled 52.00 5423.09 Cum
cement concrete M - 300 for R.C.C. solid
slab including centering, scaffolding, curing &
finishing comp. (including Apoxy Painting of
Exterior Surface)
24 Providing and casting in-situ controlled 11.00 5388.65 Cum
cement concrete M-400 for average 100 mm
thick wearing coat laid as directed including
tamping, vibrating, finishing, curing and
25 Providing and casting in-situ controlled 4.40 4814.57 Cum
cement concrete M-250 for kerb/kerb blocks
including formwork, curing and finishing
26 Providing and casting in-situ controlled 24.30 5246.75 Cum
cement concrete M-300 for approach slab
including formwork curing and finishing
27 Providing and placing in position FE 500/500D 22.20 73217.53 M.T.
bar reinforcement for following items including
cutting bending hooking and tying complete as
per detailed drawing.
28 Providing and fixing post and pipe railing as 49.00 1202.80 Rmt
per detailed drawing including 3 coats of
painting to steel works complete.
29 Provding P.V.C. 100 mm diameter water 16.00 159.37 No.
spouts including necessary iron gratings as
per drawings.
30 Providing and fixing in position 12 mm thick 18.30 702.12 Sqmt
permoulded joint filler in expansion joint for
fixed ends of simply supported span, covered
with sealant complete as per drawing and
technical specifications.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
31 Providing and laying rubble for appron (each 41.00 1041.05 Cum
stone weighing not less than 40 Kg.) including
packing & filling in the interestices with quarry
32 Providing and filling sand behind abutments 185.00 538.85 Cum
and between returns in layers as directed.
33 Providing diversion of road 3.75 mt width for 40.00 7009.73 Rmt
structure by providing & spreading Earthwork,
200 mm Unscreen GSB, 200mm GSB-II and
20 mm MSS. The Length of road is depend on
site condition etc as directed by Engineer in
Charge. (The diversion shall be maintainance
& repair in all weather season. No any extra
payment shall be made for maintainance &
repair work of diversion)
34 Compaction and finishing of cement concrete 375.00 73.14 Sqmt
road by trimix process providing extra labour
charges for the trimix vaCum dewatering
service process on cement concrete road
surface by using vaCum dewatering pump
floater surface vibrator including making
rough finish to surface as per in including
levelling the complete.
35 Providing and adding & laying surface 113.00 15.15 Kg.
Hardener in Cement Concrete grade - M-30 at
the rate of 3.0 Kg / 10 Sqmt & spreading on
flooring as per directed and instructed by
Engineer in Charge etc. comp.
Total Rs.
Rupees FiftyNine Lakh Seventeen Thousand Four Hundred Thirteen and Paisa SeventyThree Only
I / We / am/are willing to carry out the work at ________________________________% above / below
percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our
tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned in
all the tender.
5 Dismentalling of Credit materials amounting of Rs. -196272.44 must be recovered from
Contractor's respective R.A. Bill.
Signature of Contractor
Dy. Executive Engineer Executive Engineer
Panchayat R.&B. Sub Division Panchayat R.&B.Division
Dakor Nadiad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ Construction Of Box Culvert Vadadla Galtswr Pkg 50 2026 27.pdf
Enviromental.pdf
General Specification.pdf
GR - 1.pdf
GR - 2.pdf
SBD Construction Of Box Culvert Vadadala Pkg 50 2026 27 Gltswar.pdf
SPECIAL CONDITION - FMG - New Const and Widening.pdf
Specification Vadadala Pkg 50 2026 27.pdf
BOQ BOX CULVER Vadadla Pkg 63.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .