Maintenance And Repairing Work Of Surat Castle Located At Chowk Bazaar, Surat. (2nd Attempt)

Name of work : Maintenance And Repairing Work Of Surat Castle

Located At Chowk Bazaar, Surat. (2nd Attempt).

SR NO DEATAIL AMOUNT

1 CIVIL WORK ESTIMATE Rs.

2 RECOVERY WORK ESTIMATE Rs. -70,000.00

Total (1+2) Rs.

SURAT MUNICIPAL CORPORATION

SCHEDULE B (Part - A)

Name of work : Maintenance And Repairing Work Of Surat Castle Located At Chowk Bazaar, Surat.

Description Quantity Unit G.S.T.) & with Amount

Excavation of soil upto 1.5 mts. Depth including sorting

out and stacking of useful materials and disposing of

the excavated stuff upto 50 meter lead.

(A) loose or soft soil 6.00 Cu. Mt. 123.13

1 (B) dense or hard soil

Excavation of soil for depth from 1.5 mts. To 3.00 mts.

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 meter

(A) loose or soft soil 3.00 Cu. Mt. 136.47

(B) dense or hard soil 3.00 Cu. Mt. 170.50

Filling in trenches with available excavated earth in

3 layer not exceeding 20cm in depth consolidating each 26.00 Cu.Mt 136.92

deposited layer by ramming & watering etc.

Demolitation & Dismentaling Items

Demolition and disposal of unserviceable materials

with all leads and lift.

lime concrete 5.00 Cu.Mt 556.21

Demolition including stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift. (i) R.C.C. work

Demolition of brick work and stone masonary including

stacking of serviceable material and disposal of

unserviceable material with all lead and lift.

(1) in lime mortar 5.00 Cu.Mt 384.16

(2) in cement mortar 5.00 Cu. Mt. 577.92

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

Dismantaling of sheet roofing inlcuding ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materials

and disposal of unserviceable materials with all lead

and lift. (i) G.I. sheet roofing.

Dismantling country made manglore tile roofing

9 stacking of the serviceable materials and disposal of 75.00 Sq. Mt. 91.87

unserviceable materials with all lead and lift.

Dismentling door, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraces,

10 holdfasts and other attacement etc. complete and 2.00 each 197.09

stacking them within all lead and lift. (i) Not exceeding

3 Sq.M. in area.

Dismentling door, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraces,

11 holdfasts and other attacement etc. complete and 2.00 each 263.90

stacking them within all lead and lift.

(i) Exceeding 3 Sq.M. in area.

Dismentaling of wooden floors including stacking of

serviceable materilas and disposal of unserviceable

12 materials with all lead and lift. 25.00 Sq. Mt. 75.16

Dismantling dressed stone work ashlar face stone

work, marble work or precast concrete work manually/

by mechanical means including stacking of serviceable

and disposal of unserviceable material within

metres lead as per direction of Engineer in-charge:

In lime mortar 2.00 Cu. Mt. 916.30

in cement mortar 2.00 Cu. Mt. 1,800.00

Removing dry or oil bound distemper/enamel by

washing and scraping and sand papering the wall

14 surface smooth including necessary repairs the 50.00 Sq. Mt. 11.87

scratches complete.

Removing and scraping of old deteriorated plaster of

any thickness from wall / RCC member including

15 stacking of serviceable material and disposal of 582.00 Sq. Mt. 20.55

unserviceable from site of work with all lead and lift.

Scrapping out old paint or varnish or any type of finish

16 on old wood by using sandpaper including scaffolding 172.00 Sq. Mt. 285.00

upto ceiling height.

Description Quantity Unit G.S.T.) & with Amount

Providing and fixing double scaffolding system (cup

lock type) on the exterior side, up to seven story height

made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S.

clamps and M.S. staircase system in the scaffolding for

working platform etc. and maintaining it in a

serviceable condition for the required duration as

approved and removing it there after. The scaffolding

system shall be stiffened with bracings, runners,

connection with the building etc wherever required for 1,067.00 Sq. Mt. 278.94

inspection of work at required locations with essential

safety features for the workmen etc. complete as per

directions and approval of Engineer-in-charge. The

elevational area of the scaffolding shall be measured

for payment purpose. The payment will be made once

irrespective of duration of scaffolding. Note: This item

to be used for maintenance work judicially, necessary

deduction for scaffolding in the existing item to be

Providing formwork of ordinary timber plankings so as

to give a rough finish including centering, shuttering

strutting and propping etc. height of propping and

centering below supporting floor to ceiling not

exceeding 4m and removal of the same for cast in situ

reinforced concrete and plain concrete work.

(A) foundation, footings, bases of columns, etc. and

(B) Flat surfaces such as soffits of columns, landings

(B)(1) Floors etc. upto 200 mm in thickness 3.00 Sq. Mt. 268.92

(B)(2) Floors etc above 200 mm thickness 0.00 Sq. Mt. 288.96

(C) Vertical surface such as walls (any thickness)

partitions and the like including attached buttresses & 3.00 Sq. Mt. 245.54

string course & the like.

(G) Columns, pillars, post and strusts

(1) Suare rectangular polygonal in plan 0.00 Sq. Mt. 320.70

(H)(1)Sides and soffits of beams, beam haunchings,

cantilever, girders bressumers, and lintel not exceeding 3.00 Sq. Mt. 207.12

1 mt. in depth .

(H)(2)Sides and soffits of beam, beam haunchings,

cantilever, girders breassumers and lintel exceeding 1 0.00 Sq. Mt. 275.60

(I) Edges of slabs and breaks in floors and walls . 0.00 Sq. Mt. 73.67

(K) Small surfaces, such as cantilever ends brackets

and ends of steps, caps and bases to pilasters and

Chullah the like.

weather shades, chajjas corbels etc

including edge.

(M) Staircases with sloping or stepped soffits including

risers and stringers excluding landing.

(Q) Vertical fins and vertical sun breakers. 3.00 Sq. Mt. 405.89

Providing and fixing scaffolding with H frame including

all necessary support with all cross bracing etc. &

erection complete .

3 m-6 m height.

Providing and fixing scaffolding with H frame including

all necessary support with all cross bracing etc. &

erection complete.

6 m-9 m height.

Stone work in plain ashlar masonry (plain work,

matching color stone) in super-structure upto floor five

level in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse

sand) including pointing with lime mortar and an

21 admixture of pigment matching the stone shade.

4.14.1 One Side Dressed 1.15 Cu. Mt. 33,610.90

4.14.2 Both face dressed 1.15 Cu. Mt. 35,114.23

Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:5 (1-cement : 5-coarse sand including

levelling up etc. complete.

Extra labour rate for “C” channel shaped water spout

made out of stone of 325 x 250 mm, water channel

23 size 175x 150 mm, upto 1.5 mt length, in façade wall 0.00 nos 1,742.00

including carving & fixing etc. complete as directed by

Carrying out of materials

Carriage of lime, murrum, building rubbish, earth,

manure or sludge, and excavated rocks and rubbish

24 01) Lime murrum, Building Rubbish

.-upto 5.00 km 0.00 Cu. Mt. 82.62

Description Quantity Unit G.S.T.) & with Amount

.-upto 5.00 km to10 Km. 0.00 Cu. Mt. 90.20

.-upto 10.00 km to15 Km. 50.00 Cu. Mt. 96.91

Cutting of trees, including cutting of trunks, branches

and removal of stumps, roots, stacking of serviceable

material with all lifts and up to a lead of 1000 mtrs and

earth filling in the depression/pit to required compaction

as per MoRT&H specification clause 201. (Measurment

25 of girth to be done at height of 1 m above ground level)

(1) Girth from 300 mm to 600 mm 0.00 each 391.10

(2) Girth from 600 mm to 900 mm 0.00 each 637.29

(3) Girth from 900 mm to 1800mm 0.00 each 1,332.20

(4) Girth from 1800 mm to 2700mm 0.00 each 2,605.93

Removal of unwanted vegetation, cleaning of site and

disposal of the materials at suggested site.

PAVING AND FLOOR FINISHES

Providing & laying polished kota stone slab flooring

over 20 mm (average) thick base of cement mortar 1:6

(1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and

27 jointed with grey cement sluary mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete .

(a) 30mm thick 5.00 sq.mt. 1,110.75

providing and laying rough chieseld dressed stone

flooring over 20 mm thick base of cement mortar 1:5

(1 cement:5 coarse sand) or L.M. 1:1.5 including with

cement mortar 1:2 (1 cement : 2 stone dust) etc.

(A) 25 mm thick 5.00 Sq. Mt. 576.79

Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster

29 1:3 (1-cement : 3-coarse sand) and jointed with white 5.00 Sq. Mt. 1,037.25

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar crème out upto

surface using with white cement including rounding of

junctions and extending them upto 15 cms along the

wall cleaning with water oxalic acide etc. complete as

Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement

including rubbing & polishing comp

Providing and fixing 125mm- 150 mm thick spotless

black basalt flooring of different sizes varying from

32 x 150 mm upto 600 x 600 mm in lime mortar 1:1 / 1.00 Sq. Mt. 6,798.00

cement mortar 1:3 , in areas suggested by the

Providing & laying Full body Vitrified kota stone tiles of

11mm thick (as per approved by architect) in flooring

laid on bed of 25 mm (Average) base of cement mortar

33 1:6 (1 Cement : 6 Coarse sand) on new surface and 0.00 Sq.mt 1,790.00

jointed with cement slurry including finished with flush

pointing & cleaning the surface etc. comp.Size 24" x

providing and fixing polished kota stone slab 25 mm

thick in risers of steps, dedo and pillars laid on 10 mm

thick cement mortar 1:3 or L.M 1:1 and jointed with

grey cement sluary mixed with pigment to match the

shade of slab including rubbing and polishing etc.

Applying art work in china mosic as per described

35 pattern including water proofing treatment as described 0.00 Sq. Mt. 576.00

STEEL ALLUMINIUM AND IRON WORKS AND ADDITIONAL ITEMS

Description Quantity Unit G.S.T.) & with Amount

Providing and fixing steel work welded, in built up

sections, framed work including cutting, hoisting fixing

in position not applying a primer coat. Necessary

supports for protection of structure and the adjoining

structures, during opening up or dismantling of the

portion of the structure. Special sized of supports shall

be required depending upon the fabric of the heritage

structure and respect the fabric of the heritage

structure. All the supporting systems shall be free of

the heritage structure to restore the fabric of the

heritage structure. the supporting system should be

used of the very high quality and with precise

(A) In beams and joists, channels, angles, tees, flats,

hollow sections of any type with connection plates or

angle cleats as in main and cross beams, hip and 1.00 Qtl. 9,108.48

trussed purlins connected to common rafters and the

(B)For work like chain link fencing, above compound

(C) In trusses and trussed purlins up to 25 mt span and

15 mt overall height .

Providing and Fixing Hollow steel Sections Framed

Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineerin- 1,800.00 Kg 126.00

charge.TATA / JINDAL / ASIAN Make

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

38 in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) .

(B) Conventional 3.00 Cu. Mt. 4,245.09

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

39 in foundation and plinth in Lime Mortar 1: 2 (1- Lime

putty : 2 -fine sand).

(B) conventional. 3.00 Cu. Mt. 4,079.59

Extra for brick work in superstructure above plinth level

upto floor two level (B) Conventional

Extra for brick work in superstructure above floor two

level (B) Conventional

Extra for additional cutting in brick work to match the

existing size of the brick (approximately upto 25 mm

thickness visible on the brick surface ) as per existing

pattern as directed by architect.

PLASTERING & POINTING

Ruled/ Flush pointing on Red sand stone/ White sand

stone masonry surface with lime, surkhi and stone dust

mortar in the ratio 1:1:1 (1 lime : 1 surkhi (50% red and

50% light yellow surkhi) : 1 coarse sand). (The rate is

inclusive of all materials & labours involved except

Stained pointing on red sand stone with 1:1:1 ratio lime

mortar (1 lime : 1 surkhi : 1 coarse sand) mixed with

composite materials with red oxide as a pigment

including raking out joints etc. including supply of all

materials labour T&P etc required for proper

completion of work. Based

Flush and ruled pointing over joints of dressed stone

cladding, chajjas, jali etc. including racking the joints as

per traditional practice including all leads and lifts with

44 grinded mortar of lime putty and fine sand mixed in 1:2 50.00 sq. mts 195.76

ratio and gur, methi, gugal,including adding colour

pigment, etc. are to be mixed as per traditional

Lime pointing Flush / Ruled/Struck or Weatheredd lime

pointing 1:2 (1 Lime:2 surkhi)

(A) In Stonework 10.00 sq. mts 275.41

(B) In Brickwork 10.00 sq. mts 183.45

Pointing on Uncoursed stone masonry with cement

mortar 1:3 (1-cement : 3-coarse sand)

(A) Flush pointing 10.00 sq. mts 110.24

(B) Ruled pointing 10.00 sq. mts 114.25

Araish plaster (as per Jaipur practice) 1:2 ( 1 lime :

Zikki) on lime plaster or plane back ground including

preparation of lime for 6 months by slaking of lime with

curd and changing the water every week. The Kara

plaster of not more than 6 mm thick is to be left the

47 maximum of 3 months to appear the shrinkage & 217.00 Sq.M. 2,953.39

temperature cracks. Over the Kara plaster 2mm layer

of grinded lime putty is to be done and is to be rubbed

Gently by Akik stone. Then adding Khoppra & Ghee

and inserting the design of colour boarder all round.

Description Quantity Unit G.S.T.) & with Amount

20mm thick lime plaster of mix in two layers. Under

layer 12mm thick finished with a top layer 8 mm thick.

1:1:1 (1 lime putty : 1 surkhi : 1 fine sand) 0.00 Sq.M. 412.95

1:1:2 (1 lime putty : 1 surkhi : 2 coarse sand) 800.00 Sq.M. 413.10

P & L Lime Sand Plaster with lime sand mortar 1:2 (1

Lime : 2 Sand) including preparation of mortar by

traditional practice (by grinding) in specified course for

base coarse and subsequent course & Loi,tamping,

beating, till the shrinkage cracks are disappear. The

work is done with all leads as the work is of restoration

nature as per Jaipur practice including adding gur,

methi & gugal on old walls including removal of all old

loose and decade plaster, each coat to be done after

days of previous coat.

1.) 25 mm thick in three coats 50.00 Sq. Mt. 275.42

2.) 33 mm thick in four coats 0.00 Sq. Mt. 371.61

3.) 45 mm thick in four coats 0.00 Sq. Mt. 408.47

P & L Lime Surkhi Plaster lime surkhi mortar 1:2 (1

Lime : 2 Surkhi) including preparation of mortar by

traditional practice (by grinding) in specified course for

base coarse and subsequent course & Loi, tamping,

beating, curing till the shrinkage cracks are disappear.

The work is to be done with all lead as the work is of

50 restoration nature as per Jaipur practice including

adding gur, methi & gugal on old walls including

removal of all old loose and decade plaster, each coat

to be done after 3 days of previous coat.

(1) 33 mm thick in four coats 10.00 Sqm. 351.69

(2) 45 mm thick in four coats 10.00 Sqm. 380.08

Providing and spray/brushing of Gur, gugal & methi

solution for bonding of lime work as per specification

(200gm gugal, 200gm belgiri powder, 200g,m methi

51 powder and 1kg Gur mixed in 20 ltr of water and boiled 50.00 Sq. Mt. 30.00

and stirred till the solution volume reduce upto 3/4th)

using 15 ltr solution in 10 sq. mts. area

Providing 15 mm thick cement plaster in single coat on

brick wall for interior plastering upto floor two level and

52 finished even and smooth/ unfinished in wired strokes

(i) cement mortar in 1:3 5.00 Sq. Mt. 198.77

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even 0.00 Sq. Mt. 198.77

and smooth in (i) Cement mortar 1:3 (1-cement:3-

Extra over above item for plastering on ceilings and

sofits of stairs upto floor two level instead of plastering 10.00 Sq. Mt. 224.83

Providing & applying Lime kara 1:2 (1lime cream :

Zikki powder) grinding mortar with grinding

mill/manually on lime base, on ceiling and all flat

surface in two coats. First coat applying 3 mm to 4 mm

54 thick and curing properly at least 7 days, second 679.00 Sq.mt 595.76

finishing coat done after 7 days of previous coat as per

traditional practice.(thickness not more than

mm.)with all lead & lift with fine finishing complete in all

Add extra for Lime Kara work (on lime plaster base)

other than flat surface as per traditional practice with all

lead & lift with fine finishing complete in all respect on :

Domical surface/spherical/domical ceiling. 0.00 Sq.mt 149.15

Curved surface. 0.00 Sq.mt 59.58

Providing and applying slacked lime water spray on

56 lime plastered wall for three months and should be 10.00 Sq. Mt. 82.00

applied after every three days.

Providing & laying two coats of cement plaster (1:3)

mm thick including back coat and finishing coat with

brick design ( in lining pattern or made out of 15 x

57 mm grooves in finishing coat) on external surfaces, 5.00 Sq. Mt. 1,338.00

including proportionate stainer to get the brick color on

external surfaces as directed by architect.

Providing & laying brick design pointing including

scaffolding on plastered surface with white cement

58 and lime mixed in 1:1 proportion for internal work by 5.00 sq mt 1,216.00

using brick design stencil made out of M.S plate as

directed by architect.(upto 6 mts.)

Description Quantity Unit G.S.T.) & with Amount

Providing & laying cement concrete 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal

size)& curing comp. Includ. cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm

nominal size) finishing smooth curing etc. comp. Incld.

Cost of form work but excl. Cost of reinforcement for

60 R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 s.mt 2.00 Cu. Mt. 12,844.32

(1)Having c/s area up to 0.08s.mt 2.00 Cu. Mt. 9,102.61

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone

agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(2) Slabs having more than 8cm. and upto 10 cm.

Thickness'.- G.F

D) LINTELS: -- G.F 2.00 Cu. Mt. 9,982.37

(E) CHAJJAS: -- G.F 2.00 Cu. Mt. 5,576.81

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as

per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work

and rendering but excluding cost of reinforcement.

foundation, footing, base of columns and mass

(1) Having cross sectional area up to 0.085sq.mt. 0.00 Cu. Mt. 12,930.68

(1) Having cross sectional area up to 0.085sq.mt. 0.00 Cu. Mt. 9,083.57

(2) Slabs having more than 8 Cm & upto 10 Cm

(D) LINTELS 0.00 Cu. Mt. 9,963.33

(E) CHAJJAS 0.00 Cu. Mt. 7,119.46

(F) Stair cases including landings 0.00 Cu. Mt. 7,765.80

(G) Vertical and horizontal fins 0.00 Cu. Mt. 9,483.21

(H) RCC Wall- 200 mm Thick 0.00 Cu. Mt. 8,336.43

Providing & laying cement concrete 1:3:6 (1 cement:

coarse sand:6 crushed stone agg. 20mm nominal

63 size) & curing comp. include cost of form work in : ( A) 1.00 Cu. Mt. 3,095.25

foundation & plinth.

Providing and carrying out polymer treatment on old

RCC work by removing old plaster, applying rusticide,

polyalk fixoprin, polyalk EP in two coats(both coats

Providing & fixing IS Mark FE 500/500D TMT/CRS bar

reinforcement for R.C.C. work incl. bending, binding, &

placing in position etc. comp. upto two floor level

providing and fixing MS grills of required pattern to

wooden frames of window etc. with MS plate at

required spacing and frame around, square or round

66 bar with rounded headed bolts and nuts by screws.

(AA) plain grill 50.00 kg 109.41

(BA) ornamental grill 50.00 kg 160.85

Providing woodwork in frames of doors, windows,

clearstorey window and other similar work, wrought

67 frames and fixed in position.

(A) indian teak wood

Providing and fixing first class indian teak wood 75mm

68 x 60mm moulded hand rails in straight lengths 80.00 Rmt 491.07

Providing and fixing 35 mm thick shutters for doors,

windows, and clearstorey windows including indian

teak wood frames 12 cm X 7 cm size including

anodized aluminium fixtures and fastening including

69 primer coat of approved quality and two coat of oil

painting etc. complete.

(A) fully glazed 2.00 Sq. Mt. 4,836.39

(B) fully panelled 2.00 Sq. Mt. 5,533.68

(C) partly panelled and partyly glazed 2.00 Sq. Mt. 5,185.03

Providing and fixing 2nd class teak plain lining tongued

and grooved on and including wooden plugs complete

70 with necessary screws and priming coat on unexposed

Description Quantity Unit G.S.T.) & with Amount

(i) 20 mm thick 16.00 Sq. Mt. 2,500.00

Providing and fixing Decorative Eaves board made

71 from well seasoned Valsadi Sagwan wood 25 mm thick 11.00 R.mt. 3,694.00

x250 mm wide. as suggested by the architect.

Providing and fixing antic Valsadi Sagwan wooden

72 cladding( 15mm -25 mm thick) on steel member 0.00 Sq. Mt. 6,301.00

including carving & fixing etc. Complete.

Providing & fixing curved shape wooden support of

1900 mm curved length made out of 100 mm x

mm Valsadi Sagwan wood with necessary carving for 10.00 nos 6,729.00

chajja complete as directed by architect.

Providing and fixing well seasoned Valsadi Sagwan

Wood for Purlins, Rafters, column posts, door- window

74 frame & Shutters etc for any other members as per the 2.00 Cu.mt 2,50,652.00

site requirement. with crane and all necessary

Providing and fixing weather shed e-board, with

wooden texture, 8 mm thick, fixed in planks of size

varying from 100- 200 mm, with overlapping on

wooden chajja as directed by architect.

Providing & fixing louvered window shutter where top

and bottom rail made out of 210 x 50 mm BCT wood

76 and locking rail made out of 190x 50 mm BCT 5.00 Sq. Mt. 9,861.00

woodand louvers made out of 90 x 10 mm BCT wood

with copper pin operating system.

providing and fixing sheet glass selected quality (type

c) bedded in putty and fixed with wooden beading

including the cost of wooden beading of first class

teakwood and necessary cutting of glass

(A) 5mm thick 4.00 Sq. Mt. 1,195.64

(B) 6mm thick 4.00 Sq. Mt. 1,224.84

Providing and fixing sun-control film on glass

surfaces of make and quality as approved of by the

Architect(Surface area covered shall be measured and

Water Proofing Item

NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years

given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors

& conducting waterproof test as directed. (M.R.)

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over

the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement sq.

mortar 1:5 (1 Cement : 5 Coarse sand) admixed with mts.

proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless

cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645

& top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along

the vertical surface of the parapet & other adjoining

wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing

and for final test. All above operations to be down in

order and as directed and specified by the engineer-in-

charge. With average thickness of 120 mm and

Description Quantity Unit G.S.T.) & with Amount

Providing & Applying Surface Water Proofing treatment

on existing Water proofing. (1) Cleaning Surface Slab

up to Mother slab & free from any Loose Material.

Paint, Dust, Greaze or Remove all existing bituminious

Coating Completely. It is recommended to use

intense wise brushing on high speed Water jet for

through Cleaning.

(2) The Substrate must be checked for its Soundness

using Small hammer. All Cracks at corner joint,

Parapet Should be Properly treated.

(3) Cracks/construction joints treatment: Opening the

cracks/construction joints,if any, in V/U shape using

electrically operated cutting machine. Cleaning the

80 surface thoroughly from dust and loose partical using 10.00 Sq.mt 494.00

wire brush and air blower. Filling the cracks if any with

polymer modified cement mortar hybrid PU Sealant

depending on the width of crack/joint.

(4) Epoxy primer:The Epoxy primer must be applied on

clean and dry surface by mixing base and hardner in

equal proportions with the help of strirrer and adding

equal amount of water and appling on the surface at 80-

100 grams per Sq. Mt. and allowed it to dry untill tack

(5) Hybrrid polyurea part-A(base) and part-B(hardner)

are packed in two separate containers having the

predetermined mixing ratio by weight.Stir individual

container separately,Part-A and PArt-B very well, to get

PAINTING & POLISHING

Applying priming coat over new steel and other metal

surface after over and including preparing the surface

by thoroughly cleanning oil, grease dirt and other

foreign matter and scoured with brushes fine steel

wool, scrapers and sand paper with ready mixed

priming paint brushing red lead

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

82 brushing to give an even shade including cleaning the 10.00 Sq. Mt. 68.57

surface of all dirt, dust and other foreign matters

Painting one coat (excluding priming coat) on

Previously Painted steel and other metal surface with

synthetic enemal paint, burshing to give an even shade 100.00 Sq.mt 39.93

including cleaning the surface of all dirt, dust and other

foreign matters.

For every subsequent coat Extra over above item . 0.00 Sq.mt 40.09

Applying priming coat over new wood and wood based

surface after icluding preparing the surface by

84 thoroughly cleaning oil, grease, dirt and other foreign

matter sand papering and knotting.

(B) ready mixed paint, brushing wood primer pink 100.00 Sq. Mt. 43.10

Painting two coat (excluding priming coat) on new

wood and other wood based surface with synthetic

85 enamel paint, brushing to give an even shade including 100.00 Sq. Mt. 92.87

cleaning the surface of all dirt, dust and other foreign

matters papering and stopping.

Painting two coats (excluding priming coat) on

previously painted wood & wood based surface with

enamel paint to give an even shade & surface incl.

cleaning of all dirt, dust & other foreign matter.

varnishing two coats (excluding priming coat) on new

wood and wood based surfaces, under coating with

flatting varnish and finishing coat with varnish to give

an even surface including cleaning the surface of all

dirt, dust and sand papering so as to produce a smooth

Polishing with french polish on new wood and wood

based surfaces to give and even surfaces including

88 cleaning the surface of all dirt, dust and sand papered 10.00 Sq. Mt. 142.49

smooth and including a coat of wood filler.

Polishing with french polished on previously polishing

wood & wood based surface to give an even surface

89 incl. cleaning the surface of all dirt, dust & sand 400.00 Sq. Mt. 73.34

papered smooth incl. a cost of wood filler.

Appliying wax polish on new wood and wood surface

with bees wax polish in proportion of 2:1.5 :1:0.5 (2-

90 Bees wax : 1.5 Linseed oil : 1- Turpentine even surface 10.00 Sq. Mt. 68.81

including cleaning the surface of all dirt dust and sand

papered smooth.

Description Quantity Unit G.S.T.) & with Amount

Appliying wax polish on previously wax polished wood

and wood based surface with bees wax polish in

proportion of 2:1.5 :1:0.5 (2-Bees wax :1.5 Linseed oil :

1- Turpentine :0.5 varnish by weight to give an even

surface including cleaning the surface of all dirt dust

and sand papered smooth.

coal tarring two coats on new wood and wood based

surfaces using 0.16 and 0.12 liters of coal tar per Sq.

92 Mt. in the first and second coat respectively to give an 50.00 Sq. Mt. 35.92

even shade including cleaning of all dirt and dust and

other foreign matter.

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade

and colour approved by architects, on exterior surfaces

of the building including scaffolding, preparing the

surface, watering, curing etc. complete and as directed

by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir

93 brush, followed by water jetting if required. Fill up all 122.00 Sq. Mt. 82.00

minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow

it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required

between each coat of weather shield max paint

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface

94 to give an even shade including thoroughly brushing 300.00 Sq. Mt. 40.59

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Providing and applying breathable, non-reactive,

transparent, antifungal, UV resistant, alkaline stable,

impregnable silane-siloxane or equivalent based water

repellent coating on exposed absorbing substrate like

stone surface/ concrete surface/ mineral painted

95 surface / exposed brick surface / lime surface in two or 905.00 Sq. Mt. 196.61

more coats to give uniform finish surface in all heights,

horizontal, inclined, vertical and on ceiling complete in

all respect and making it complete water-proof as per

direction of the Engineer-in charge.

Providing and applying two coats of (Basic white and

terracota ) of protectguard colour including applying

two coat of primer coat (Imperguard SF) as per

approved by architects, on exposed brick work and

lime based exterior surface of the building including

preparing the surface,remove old colour & Cleaning the

96 Surface, watering, curing, etc. complete and as 700.00 Sq. Mt. 951.00

directed by the architect and engineer incharge.

The applied colour system (primer + ProtectGuard

finish) shall carry a 7‑year warranty against peeling,

fading, or discolouration, subject to standard

maintenance conditions.

Providing and fixing SS bolt (threaded) with nuts and

safety washers (304 grade ) 16 mm dia. 750 mm long

97 complete with bending , drilling holes , 1.00 nos 1,567.00

cleaning,grouting in lime mortar/cement mortar etc.

Providing and fixing SS pins (304 grade ) 10 mm dia.

98 500 mm long complete with drilling holes, cleaning, 0.00 nos 672.00

grouting in lime mortar etc. Complete.

Providing & fixing tiled roofing with manglore tiles

including teak reapers of size 50mm X 25 mm .

Providing and fixing Dungree cloth in roof so as to

100 avoid rain water infiltration. 10.00 Sq. Mt. 408.00

Providing and fixing plain Aluminium sheet of 0.80 mm

thickness in roof and including fastening with screws,

washers etc complete as suggested by contractor.

Description Quantity Unit G.S.T.) & with Amount

Providing and fixing 20-25 mm thick Fibre Cement

102 sheet on M.S sections as directed by architect. 5.00 Sq. Mt. 1,168.00

Mangalore tile dipped in surface hardener and water

repellent chemical. 200.00 Sq. Mt. 273.00

Providing and fixing Manglore type ridge class "AA"

104 tiles including pointing with colored cement mortar, 50.00 rmt 536.00

curing etc complete.

Providing & fixing on roof pressed clay tile (Mangalore

tile) of 20 mm nominal thickness and of approved size

105 and as per approved pattern on steel/ wooden frame 0.00 Sq.mt 284.42

work complete (steel/ wooden frame work to be paid

Cleaning of mangalore tiles by using soft brush/jute

106 and cleaned with water jet machine. 100.00 Sq. Mt. 192.00

Providing and fixing plywood lining with but jointed and

nails (frame work and cover fillets to be measured and

paid for separately) (ii) 9mm thick ply.

Plain Gypsum Sheet Ceiling: Providing and fixing of

Plain Gypsum Sheet Ceiling using 80 mm. x 26 mm. x

0.50 mm. thick g. i. Ceiling Sections, 15 mm. x 45 mm.

x 15 mm. x 0.90 mm. thick Intermediate Channels,

mm. x 28 mm. x 30 mm. x 0.50 mm. thick Perimeter

Channels and 25 mm. x 10 mm. x 0.50 mm thick

Ceiling Angles, as per IS 513 & 150 GSM Galvanised

Providing and fixing Brass hardware such as door

109 handles, stoppers, hinges, aldrops, etc as per the 40.00 kg 2,893.00

design approved by the architect.

Extra labor rate for refixing old door & windows with

110 necesarry cleaning and patch work of wood etc 1.00 Sq. Mt. 1,322.00

Providing and fixing Wash Down Water closet wallhung

type W.C. pan 2058EWC of CERA make with integral

P trap including jointing the trap with soil pipe in

111 cement mortar 1:1 (1 cement : 1 find sand) (seat and 1.00 No. 4,733.00

cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in white colour

Providing and fixing plastic hydraulic and soft close

seat cover 2328 B of CERA make for wash down

water closet with C.P. brass hinges and rubber buffers

in white colour.

Providing & fixing wash basin 1034A + CM103 of

CERA makewith cutting holes & making good the

same incl. fittings such as, capstan head screw down

high pressure with screws, shanks & back nuts, C.P.

Brass waste trap, screw down stop tap 15 mm. dia.

etc. complete. (A) Vitreous china flat back wash basin

550 mm.x 400 mm. size in white colour For all Floor.

Providing & fixing Concealed Urinal 5005 of CERA

114 make including conecting the Urinal with waste pipe, 1.00 No. 6,202.00

tap etc. complete. (A) White earthenware flat back.

Providing and fixing concealed Flush Tank 30151E of

Kludi make + 50311 chrome plate of Kludi for Water

closet wallhung type W.C. pan with integral trap

including jointing it with water pipeand complete with 1.00 No. 5,777.00

finishing with cement mortar 1:1 (1 cement : 1 find

Providing & fixing Laminated 8mm th mirror of Modi

Guard make, pasting 4mm mirror with 4mm glass of

superior quality at all floor levels, mounted on 12 mm.

th. A.C. sheet or plywood sheet & fixed to wooden

plugs with C.P.brass screws and washers etc. For all

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make

including fittings make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Description Quantity Unit G.S.T.) & with Amount

Providing & Fixing S S (304) anti Cockroach Nanhi

Trap 150 mm x 150 mm of Chili make at all floor levels

118 of self cleaning design with screwed down or hinged 1.00 No. 700.00

grating incl. cost of cutting making good the walls &

floors etc. For all Floor

Providing & Fixing S S (304) Bottle Trap of CM104B of

CERA make at all floor levels of self cleaning design

119 with screwed down or hinged grating incl. cost of 1.00 No. 1,391.00

cutting making good the walls & floors etc. For all

Providing and fixing C. P. Brass two way bib cock

CQ906A of approved quality conforming to IS

standrards and wighting not less then 810 gms with

mm nominal bore.

Providing and fixing C. P. Brass long body bib cock

CQ904 with flange and aereater of approved quality

conforming to IS standrards and wighting not less then 1.00 No. 1,224.00

690 gms with 15 mm nominal bore.

Providing and fixing C. P. Brass stop cock (concealed)

of approved quality conforming to IS standrards :

with 15 mm nominal bore. Model No: CQ927E + 1.00 No. 1,279.00

CSC153 of CERA make with body

Providing and fixing C. P. Brass Angle cock

(concealed) of approved quality conforming to IS

standrards : 8931 with 15 mm nominal bore. Model no: 1.00 No. 955.00

CQ908 of CERA company with wall flange.

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete Make- Cera

F2013101, Parry ware Cat. No.: G3102A1, HindWare 0.00 Nos 1,457.97

Cat. No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia bib tap with wall Flange

at all floor levels, polished bright etc. comp. Make-

125 Cera F2013151 BIB COCK, Parry wareG3104A1, 0.00 Nos 1,353.77

HindWare F280002 BIB COCK, Jaquar FLR-5047 N

Providing & Fixing 15 mm Dia 2 way bib tap with wall

Flange at all floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, 0.00 Nos 1,828.81

HindWare Cat. No.: F530004, Jaquar FLR-5041N

Providing flush cock consisting lever, cartridge sleeve

& flange & concealed part Make- Cera EXPOSED

PART F2013751 &Concealed part F4060101 , Parry

ware T9824A1&T9823A1, Jaquar FLR 5083 KN

CONCEALED BODY ALD-081,HindWare F280052 &

CONCEALED STOP COCK

Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long

and nuts, washer and brass flange complete, including

128 cutting and making good the wall where required. 0.00 Nos 1,564.36

Make- Cera F1020362, Parry ware T0712A1,

HindWare Cat. No.: F440020 F850094, jaquar CON

Providing and fixing Wash Down Water closet

European type W.C. pan with integral P or S trap with

normal closing seat cover L bend ncluding jointing the

trap with soil pipe in cement mortar 1:1 (1 cement :

129 find sand) (A) Viterous china pattern - I Make- Cera 0.00 Nos 3,530.09

CONVENTIONAL B1510121 , Parry ware C0297*/

HindWare sleek 20011, Jaquar- CNS-WHT-

Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with

C.I. or M.S. Brackets painted white incl. cutting holes &

130 making good the same etc. complete. For all Floor 0.00 Nos 3,276.63

Make- Cera Cat. No. S2040121, Parry wareC0434*

(CTH), Jaquar SLS- WHT -6801 ,HindWare10004

per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia.

C.P. spreader,32mm dia CP bottle trap and pipe to wall

with C.P. flange complete including cutting and making

131 good the walls and floors 0.00 Nos 2,535.70

wherever required. Make- CeraCat. No. S4020103,

Parry ware C0501*, Jaquar URS-WHT- 13261H

,HindWare BACK SMALL

Providing & fixing of overhead shower 80 mm (3”) dia

with 3 flow with Overhead Shower arm 200 mm with

132 wall flange complete Make- Cera F7010602AB, Parry 0.00 Nos 1,526.42

ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Description Quantity Unit G.S.T.) & with Amount

Providing and fixing Towel Ring fabricated from

seamless stainless steel tube 2mm thick in bath room

with polished wall flange at end of bars with heavy duty

133 anchor fasteners & accessories. 0.00 Nos 924.24

Make- Cera F5014115CH, Parry ware F5014115CH,

Jaqua ACN- 1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long

approved make including, providing & fixing C.P. brass

screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T,

Jaquar 1111BSM,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap

dish of approved make. Including providing & fixing

135 screws, washers, cutting & making good the walls. 0.00 Nos 839.91

Make- Cera F5007106, Parry ware T6902A1, Jaquar

ACN-1131N,HindWare F880011

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china

long pattern Make- Cera S3010109, Parry ware

C0117CS/C0117* , Jaquar,HindWare

Prov.& Fixing Health Faucet ABS Body with wall Hook

and 1 Meter chrome plated PVC Hose Pipe. Make-

Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-

587,HindWare F160109

Providing & fixing white vitreous china Ladies urinal of

size 470 x360X100 mm and 15mm dia. C.P. spreader,

and pipe to wall complete including cutting and making

good the walls and floors wherever required. Make-

Cera 4040101, Parry ware C0503, ,HindWare

Providing & fixing Paper holder with flap guard of

mm long approved make including, fixing C.P. brass

screws, making holes in walls & making good.

Make- Cera f5002110, Parry ware T6005A1, Jaquar

AHS-1551, HindWare F890003

Providing & Fixing pressmatic bib tap with wall Flange

at all floor levels, polished bright etc. comp. Make-

140 Cera F9020151, Parry ware G2056A1 , Jaquar PRS- 0.00 Nos 1,842.06

,HindWare F310016

Providing Metropole Flush Valve Dual Flow 40mm Size

(Concealed Body) Make- Cera F8010202 , Parry ware

T3302A1 , Jaquar FLV-1089NSQ ,HindWare F860075

Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar

,HindWare F650013

RCC Core Cutting is about making precise, circular

cuts for creating holes of required diameters for

Rehabilitation in civil works. The core drilling rod is

fitted with diamond pieces at the drilling end. The core

cutting machine can be used for both horizontal and

vertical hole making purposes.

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

144 class NP2 of the following internal diameter with collars 10.00 Rmt 1,077.15

and butt ends prepared for collar joints including testing

of joints complete.(E) 450mm

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

145 class NP2 of the following internal diameter with collars 3.00 Rmt 1,400.95

and butt ends prepared for collar joints including testing

of joints complete.(G) 600mm

Providing and filling in depressions of Bath and W.C.

At all floor levels, after completing plumbing work of

pans, pipes,traps etc.with cinder or fly ash as directed

by Engineer in charge etc. comp.

Providing & laying granite slab 18mm thick in flooring,

toilet flooring, treads of steps and landing laid on bed

of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse

sand) or lime mortar 1:1.5 laid and finished with flush

pointing in white or colour cement including rubbing

and polishing complete.

Description Quantity Unit G.S.T.) & with Amount

Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement: 4 Coarse sand) and

finished with flush pointing in white or colour cement

including rubbing & polishing comp.

Providing & laying granite slab 18mm thick in Window-

Door seal Frame Etc laid on 10mm thick cement

mortar 1:4 (1 Cement nessary adhesive material and

finished with flush pointing in white or colour Coarse 6.00 Sq. Mt 2,026.00

sand) with cement, including rubbing & polishing

comp.. (Basic Rate:- Rs. 1000.0/S.M.

150 Labour Charges For Edge Finished For Granite 6.00 R.M. 43.43

Surface Cleaning

Cleaning the sand stone surface and removing dirt,

dust, bird dropping, grease, oil, algae, fungus, monkey

beats, vegetable growth etc., including providing,

applying and washing the surface with liquid Ammonia

151 Chemical of 5% solution and other chemical cleaning 899.00 Sq.mt 138.68

agent as approved by Archaeological Survey of India/

Engineer-in-charge, of approved brand and

manufacturer, with the help of required scrubbers and

also cleaning with machine operated water jet mixed

Providing quantity

installing silica where

barricades ever supplying,

including required,

paiting with flourscent paint/white paint and fixing CGI

sheet 24SWG of required height as per site condition

and M.S. angle of required size to restain at 2.5 mt. c/c

and dismantalling the same after completion of work

and allowing for movement of traffic as per drawing

and as per instruction from engineer in charge.

Miscellaneous Items

Labour charges - Mason 1st Class 10.00 Each 798.91

153 Labour charges - Mazdoor (Female) 10.00 Each 484.80

Labour charges - Mazdoor (Male) 10.00 Each 510.05

Boring holes 3.5 mt.deep in ordinary soil (for cast in

situ piles) & disposal of the surplus excavated soil as

directed within a lead of 50 M. For following diameter of

Extra for under reaming inside the bore Holes for under

reamed piles of following Diameter.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based chemical

solution on surface of timber work for termite control

including labour and material etc. complete. Using

chlordene 20 EC. As per 6113 part III concentration

156 weight 1% is recommended 1 litre chemical emulsion 0.00 Sq. Mt. 63.15

dillute with 9 litre of kerosene percent concentration

total dillute concentration will be 10 litre inclusive of the

litre chemical emulsion application 0.75/lt chemical per

1 sq.mt printed two coat wood surface.

applying general insecticide pest control treatment of

floors, cupboards etc. including labour material etc.

complete using heptachloride 20 EC as per 6113 pest

concentration weight 0.50 % is recommended 1litre

157 checmical emulsion dillute with 39 litre of water will 0.00 Sq. Mt. 53.45

give. Total dillute concentration will be 40 litre inclusive

of 1 litre chemical emulsion application 0.5 litre

chemical/sq.mt of surfaces is recommended as per I. S

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret- II

158 Consentration Weight one percent is recommended i.e 0.00 Sq. Mt. 87.03

one litre 20 EC chemical emulsion with 19 liter give

% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Description Quantity Unit G.S.T.) & with Amount

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including

labour and material Using Chlorpyriphos 20 ECAs per

IS 6313 part - II (1% concentration by mass) is

159 recommended i.e one litre chemical emulsion diluted 0.00 Sq. Mt. 24.90

with 19 liter oil base. Total solution will be 20 liters

inclusive of one liter chemical emulsion application at

the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.

Providing & constructing cornice in lime mortar 200mm

deep and 250 mm high on brick façade as per existing

design including carving and finishing etc. Complete as

directed by architect.

Providing & fixing brick bat with lime mortar plaster

161 upto 75 mm deep, including scaffolding etc complete. 1.00 Sq. Mt. 1,098.00

Providing & laying high density plastic sheet (Tadpatri)

162 over any existing structure for monsoon protection 1.00 Sq. Mt. 123.00

including security against wind pressure.

Providing and fixing temporary galvenized sheet

roofing on M.S. Pipes, angle supports etc complete for

monsoon protection including security against wind

Providing & fixing PVC spikes having size 75 mm x

164 mm fixing with araldite for bird protection on 10.00 Rmt 1,451.00

purlin,rafter and other roof surface.

Water resisitent chemical coating

Application of water repellent by water borne modified

silane or silicate based chemical solutions Dowsil-6689

water repellent mixed laboratory grade IPA by

approved make or equivalent and as per the 0.00 Sq. Mt. 325.00

instructions after the completely prepared surface

suitable for application by removing all foreign and

loose particles by air and water application methods.

complete in all aspects.

Water resisitent chemical coating

Application of water repellent by water borne modified

silane or silicate based chemical solutions Dowsil-6683

166 water repellent mixed potable water and as per the

instructions after the completely prepared surface 0.00 Sq. Mt. 300.00

suitable for application by removing all foreign and

loose particles by air and water application methods.

complete in all aspects.

Special Anti Carbonation Paint

Application of the primer

MYK/Cera cem /Kerakol Aqua Arm primer MP which is

modified acrylic, water based alkali resistant primer-

cum-sealer & then applying 2 coats of MYK MYK/Cera

cem /Kerakol excel coat which is single component

water based elastomeric acrylic waterproof coating

167 having DPUR properties with elongation of 100% and 0.00 Sq. Mt. 470.00

crack bridging property of upto 1.5mm with sheen of 6-

10 upto 60deg head resisting water pressure of upto

2ba. as per the instructions after the completely

prepared surface suitable for application by removing

all foreign and loose particles by air and water

application methods. complete in all aspects.

Anti corrosive Coating

Cleaning the surface with Cera-Chem Cera rust

168 remover. (Labour+Material) 0.00 Sq. Mt. 376.00

Apply 2 coats of coating of Cera-Chem Cera solo poxer

Total Amount of Civil Work(A)

Total Amount of Civil Work(A)

Executive Engineer

SURAT MUNICIPAL CORPORATION

SCHEDULE B (Part - B)

Name of work : Maintenance And Repairing Work Of Surat Castle Located At Chowk Bazaar, Surat.

Item No. Description Quantity Unit G.S.T.) & with Amount

Recovery for steel

Dismentling steel work including distempering and

stacking the maerials with all lead and lift.

Total Amount of Recovery Work(B)

Total Amount of Recovery Work(B)

Executive Engineer